ardupilot/Tools/FlightGear/FGShim.c

683 lines
23 KiB
C
Raw Normal View History

2011-09-08 22:31:32 -03:00
// -*- tab-width: 8; Mode: C++; c-basic-offset: 8; indent-tabs-mode: nil -*-
//
// Copyright (c) 2010 Michael Smith. All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
// OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
// HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
// LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
// OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
// SUCH DAMAGE.
//
//
// This is a serial port proxy shim for use with MAVLink-capable MAV
// controllers. It allows the controller to interact with FlightGear
// and control a MAV inside the simulation.
//
// In addition to bridging between MAVLink and FlightGear, MAVLink data
// is forwarded to QGroundControl if it is running on the local system.
//
// The controller must be willing to send the RC_CHANNELS_SCALED
// stream in response to a request, and it should be able to operate
// using the data supplied by the GPS_RAW and RAW_IMU messages.
//
#include <sys/errno.h>
#include <sys/types.h>
#include <sys/signal.h>
#include <sys/sysctl.h>
#include <sys/time.h>
#include <sys/uio.h>
#include <netinet/in.h>
#include <err.h>
#include <fcntl.h>
#include <math.h>
#include <pthread.h>
#include <signal.h>
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#include <termios.h>
#include <unistd.h>
#pragma pack(1)
#include <GCS_MAVLink/include/mavlink/v1.0/mavlink_types.h>
2011-09-08 22:31:32 -03:00
mavlink_system_t mavlink_system;
void comm_send_ch(mavlink_channel_t chan, uint8_t ch);
#define MAVLINK_USE_CONVENIENCE_FUNCTIONS
#include <GCS_MAVLink/include/mavlink/v1.0/ardupilotmega/mavlink.h>
2011-09-08 22:31:32 -03:00
#define TARGET_SYSTEM 7 /* XXX what should these really be? */
#define TARGET_COMPONENT 1
/*
* Binary packet as exchanged with FG.
*
* Described in MAVLink.xml
*/
struct fgIMUData {
// GPS
double latitude;
double longitude;
double altitude;
double heading;
double velocityN;
double velocityE;
// IMU
double accelX;
double accelY;
double accelZ;
double rateRoll;
double ratePitch;
double rateYaw;
// trailer
#define MSG_MAGIC 0x4c56414d
uint32_t magic;
} __attribute__((packed));
struct fgControlData {
double aileron;
double elevator;
double rudder;
double throttle;
} __attribute__((packed));
/* utility functions for transforming FG blobs */
void swap32(void *p);
void swap64(void *p);
/* diagnostic tool */
void hexdump(void *p, size_t s);
/* local port addresses for communication with FlightGear - these are the FG defaults */
#define IMU_LISTEN_PORT 5501
#define CTRL_SEND_PORT 5500
/* local port addresses for communication with QGroundControl */
#define QGCS_LISTEN_PORT 14551
#define QGCS_SEND_PORT 14550
/*
* debug logs
*/
#define FAC_MAIN 0
#define FAC_CTRL 1
#define FAC_IMU 2
#define FAC_QGCS 3
char *fac_names[] = {"", "CTRL: ", "IMU: ", "QGCS: "};
#define log(_fac, _fmt, _args...) \
do { \
fprintf(stderr, "%s" _fmt "\n", fac_names[FAC_##_fac], ##_args); \
} while(0)
#define debug(_fac, _lvl, _fmt, _args...) \
do { \
if (gDebug >= _lvl) fprintf(stderr, "%s" _fmt "\n", fac_names[FAC_##_fac], ##_args); \
} while(0)
int gShouldQuit; /* set to 1 if threads should exit */
int gDebug; /* set to 1 if -d is passed */
void usage(void); /* print usage message */
void shouldQuit(int sig); /* signal that the program should quit */
/*
* Thread handling aircraft control instructions from the MAV controller to FlightGear.
* Also forwards MAVLink packets to QGroundControl.
*/
pthread_t gCTRLThread;
void *ctrlThread(void *arg);
void ctrlHandleMessage(mavlink_message_t *msg);
/* thread handling pseudo-IMU data from FlightGear to the MAV controller */
pthread_t gIMUThread;
void *imuThread(void *arg);
int imuGetMessage(int sock, struct fgIMUData *msg);
void imuSendPacket(struct fgIMUData *msg);
/* thread handling MAVLink traffic from QGroundControl to the MAV controller */
pthread_t gQGCSThread;
void *qgsThread(void *arg);
int fgSock; /* socket used for flightgear comms */
struct sockaddr_in fgAddr = {sizeof(fgAddr), AF_INET};
int qgcsSock; /* socket used for qgroundcontrol comms */
struct sockaddr_in qgcsAddr = {sizeof(qgcsAddr), AF_INET};
int port; /* serial port connected to MAV controller */
pthread_mutex_t portMutex; /* lock that must be held while writing to the serial port */
int
main(int argc, char *argv[])
{
int ch;
struct sockaddr_in sin = {sizeof(sin), AF_INET};
int opt;
struct termios t;
/* handle arguments */
while ((ch = getopt(argc, argv, "ds:")) != -1) {
switch(ch) {
case 'd':
gDebug++;
break;
case '?':
default:
usage();
}
}
argc -= optind;
argv += optind;
if (pthread_mutex_init(&portMutex, NULL))
errx(1, "port mutex");
/*
* set up the flightgear socket
*/
fgSock = socket(AF_INET, SOCK_DGRAM, 0);
if (fgSock < 0)
err(1, "IMU socket");
sin.sin_port = htons(IMU_LISTEN_PORT);
sin.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
fgAddr.sin_port = htons(CTRL_SEND_PORT);
fgAddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
/* bind the listening side of the socket */
for (;;) {
if (bind(fgSock, (struct sockaddr *)&sin, sizeof(sin)) < 0) {
if (errno != EADDRINUSE)
err(1, "IMU socket bind");
log(IMU, "socket in use, waiting...");
sleep(5);
} else {
break;
}
}
/* set socket options */
opt = 1;
if (setsockopt(fgSock, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)) < 0)
err(1, "IMU setsockopt SO_REUSEADDR");
/*
* set up the qgroundcontrol socket
*/
qgcsSock = socket(AF_INET, SOCK_DGRAM, 0);
if (qgcsSock < 0)
err(1, "QGroundControl socket");
qgcsAddr.sin_port = htons(QGCS_SEND_PORT);
qgcsAddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
sin.sin_port = htons(QGCS_LISTEN_PORT);
sin.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
/* bind the listening side of the socket */
for (;;) {
if (bind(qgcsSock, (struct sockaddr *)&sin, sizeof(sin)) < 0) {
if (errno != EADDRINUSE)
err(1, "QGroundControl socket bind");
log(QGCS, "socket in use, waiting...");
sleep(5);
} else {
break;
}
}
/* set socket options */
opt = 1;
if (setsockopt(qgcsSock, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)) < 0)
err(1, "QGroundControl setsockopt SO_REUSEADDR");
/*
* set up the serial port at 57600
*/
if (argc < 1)
errx(1, "missing serial port name");
if (0 >= (port = open(argv[0], O_RDWR | O_NONBLOCK)))
err(1, "could not open port %s", argv[0]);
if (tcgetattr(port, &t))
err(1, "tcgetattr");
cfmakeraw(&t);
t.c_cflag |= CLOCAL;
cfsetspeed(&t, 57600);
if (tcsetattr(port, TCSANOW, &t))
err(1, "tcsetattr");
/* start worker threads */
if (pthread_create(&gIMUThread, NULL, imuThread, NULL))
err(1, "IMU thread");
if (pthread_create(&gCTRLThread, NULL, ctrlThread, NULL))
err(1, "CTRL thread");
if (pthread_create(&gQGCSThread, NULL, qgsThread, NULL))
err(1, "QGS thread");
/* don't install new handlers until the threads are ready */
signal(SIGHUP, shouldQuit);
siginterrupt(SIGHUP, 1);
signal(SIGINT, shouldQuit);
siginterrupt(SIGINT, 1);
signal(SIGTERM, shouldQuit);
siginterrupt(SIGTERM, 1);
signal(SIGQUIT, shouldQuit);
siginterrupt(SIGQUIT, 1);
pthread_join(gIMUThread, NULL);
log(IMU, "service terminated");
pthread_join(gCTRLThread, NULL);
log(CTRL, "service terminated");
pthread_join(gQGCSThread, NULL);
log(QGCS, "service terminated");
close(port);
close(fgSock);
close(qgcsSock);
return(0);
}
#if __linux__
#define getprogname program_invocation_short_name
#endif
void
usage()
{
fprintf(stderr, "usage: %s [-d[-d]]\n", getprogname());
exit(1);
}
void
shouldQuit(int sig)
{
if (!gShouldQuit) {
fputs("\b\b \b\b", stderr); /* overwrite tty's ^C */
if (sig)
debug(MAIN, 1, "caught signal %d, cleaning up", sig);
pthread_kill(gIMUThread, SIGINT);
pthread_kill(gCTRLThread, SIGINT);
pthread_kill(gQGCSThread, SIGINT);
gShouldQuit = 1;
}
}
/*
* IMU thread listens for datagrams from FlightGear and forwards them out
* the serial port.
*/
void *
imuThread(void *arg)
{
struct fgIMUData msg;
/* do not take signals on this thread */
pthread_sigmask(SIG_BLOCK, NULL, NULL);
log(IMU, "Listening for FlightGear binary data on port %d", IMU_LISTEN_PORT);
/* handle IMU messages */
while (!gShouldQuit) {
if (imuGetMessage(fgSock, &msg))
imuSendPacket(&msg);
}
return(NULL);
}
int
imuGetMessage(int fgSock, struct fgIMUData *msg)
{
ssize_t received;
/* get a message */
received = recvfrom(fgSock, msg, sizeof(*msg), MSG_WAITALL, NULL, NULL);
if (received != sizeof(*msg)) {
if (received < 0) {
log(IMU, "receive error: %s", strerror(errno));
shouldQuit(0);
return(0);
} else {
if (0 == received) {
log(IMU, "Received zero-length data packet, check that MAVLink.xml is correctly installed.");
shouldQuit(0);
} else {
log(IMU, "received %ld instead of %lu", received, sizeof(*msg));
}
return(0);
}
}
swap32(&msg->magic);
if (msg->magic != MSG_MAGIC) {
log(IMU, "bad magic 0x%08x not 0x%08x", msg->magic, MSG_MAGIC);
return(0);
}
/* endian-swap message fields */
swap64(&msg->latitude);
swap64(&msg->longitude);
swap64(&msg->altitude);
swap64(&msg->heading);
swap64(&msg->velocityN);
swap64(&msg->velocityE);
swap64(&msg->accelX);
swap64(&msg->accelY);
swap64(&msg->accelZ);
swap64(&msg->rateRoll);
swap64(&msg->ratePitch);
swap64(&msg->rateYaw);
return(1);
}
void
imuSendPacket(struct fgIMUData *msg)
{
struct timeval tv;
uint64_t usec;
int i;
gettimeofday(&tv, NULL);
usec = (uint64_t)tv.tv_sec + tv.tv_usec;
pthread_mutex_lock(&portMutex);
debug(IMU, 2, "***");
debug(IMU, 2, "lat %f lon %f alt %f", msg->latitude, msg->longitude, msg->altitude);
debug(IMU, 2, "head %f velocityN %f velocityE %f", msg->heading, msg->velocityN, msg->velocityE);
debug(IMU, 2, "accX %f accY %f accZ %f", msg->accelX, msg->accelY, msg->accelZ);
debug(IMU, 2, "roll %f pitch %f yaw %f", msg->rateRoll, msg->ratePitch, msg->rateYaw);
#define ft2m(_x) ((_x) * 0.3408) /* feet to metres */
#define dps2mrps(_x) ((_x) * 17.453293) /* degrees per second to milliradians per second */
#define fpss2mg(_x) ((_x) * 1000/ 32.2) /* feet per second per second to milligees */
#define rad2deg(_x) fmod((((_x) * 57.29578) + 360), 360) /* radians to degrees */
mavlink_msg_gps_raw_send(0,
usec,
3, /* 3D fix */
msg->latitude,
msg->longitude,
ft2m(msg->altitude),
0, /* no uncertainty */
0, /* no uncertainty */
ft2m(sqrt((msg->velocityN * msg->velocityN) +
(msg->velocityE * msg->velocityE))),
rad2deg(atan2(msg->velocityE, msg->velocityN)));
mavlink_msg_raw_imu_send(0,
usec,
fpss2mg(msg->accelX),
fpss2mg(msg->accelY),
fpss2mg(msg->accelZ),
dps2mrps(msg->rateRoll),
dps2mrps(msg->ratePitch),
dps2mrps(msg->rateYaw),
0, /* xmag */
0, /* ymag */
0); /* zmag */
pthread_mutex_unlock(&portMutex);
}
void *
ctrlThread(void *arg)
{
fd_set readset, errorset;
mavlink_message_t msg;
mavlink_status_t status;
int result;
/* do not take signals on this thread */
pthread_sigmask(SIG_BLOCK, NULL, NULL);
log(CTRL, "Listening for MAVLink packets and sending to %d", CTRL_SEND_PORT);
/* loop handling data arriving on the serial port */
while (!gShouldQuit) {
/* wait for data or an exceptional condition */
FD_ZERO(&readset);
FD_ZERO(&errorset);
FD_SET(port, &readset);
FD_SET(port, &errorset);
if (select(port + 1, &readset, NULL, &errorset, NULL) < 0) {
if (errno != EINTR)
log(CTRL, "select error: %s", strerror(errno));
goto abort;
}
/* exception? */
if (FD_ISSET(port, &errorset)) {
log(CTRL, "serial port error");
goto abort;
}
/* no data available for reading? */
if (!FD_ISSET(port, &readset))
continue;
/* read data in chunks and process */
for (;;) {
uint8_t buf[128]; /* 11ms @ 115200 */
ssize_t cnt;
uint8_t *ch;
/* port is nonblocking, cnt may be as small as 1 byte */
cnt = read(port, buf, sizeof(buf));
if (cnt < 0) {
/* have we run out of data? */
if (errno == EWOULDBLOCK)
break;
/* some other error */
log(CTRL, "serial port error");
goto abort;
}
/* port closed for some reason */
if (cnt == 0) {
log(CTRL, "serial port closed");
goto abort;
}
/* process characters, possibly handle messages */
for (ch = buf; cnt; ch++, cnt--)
if (mavlink_parse_char(0, *ch, &msg, &status))
ctrlHandleMessage(&msg);
}
}
abort:
shouldQuit(0);
return(NULL);
}
void
ctrlHandleMessage(mavlink_message_t *msg)
{
struct fgControlData cdata;
time_t now;
static time_t lastRCMessage;
uint8_t buf[1024];
int len;
time(&now);
switch(msg->msgid) {
case MAVLINK_MSG_ID_HEARTBEAT:
/*
* If we have received a heartbeat, we are connected
* to something. If we haven't seen an RC_CHANNELS_SCALED
* message in the last couple of seconds, ask for it to
* be added to the stream.
*/
if ((now - lastRCMessage) > 2) {
debug(CTRL, 1, "got heartbeat, requesting RC channel datastream");
pthread_mutex_lock(&portMutex);
mavlink_msg_request_data_stream_send(0,
TARGET_SYSTEM,
TARGET_COMPONENT,
MAV_DATA_STREAM_RAW_CONTROLLER,
10, /* 10Hz enough? */
1); /* start */
pthread_mutex_unlock(&portMutex);
/* suppress re-sending for 2 seconds */
lastRCMessage = now;
}
break;
case MAVLINK_MSG_ID_RC_CHANNELS_SCALED:
/* build the control message for FG */
/* XXX ArduPilotMega channel ordering */
cdata.aileron = (double)mavlink_msg_rc_channels_scaled_get_chan1_scaled(msg) / 10000;
cdata.elevator = (double)mavlink_msg_rc_channels_scaled_get_chan2_scaled(msg) / 10000;
cdata.throttle = (double)mavlink_msg_rc_channels_scaled_get_chan3_scaled(msg) / 10000;
cdata.rudder = (double)mavlink_msg_rc_channels_scaled_get_chan4_scaled(msg) / 10000;
debug(CTRL, 2, "%+6.4f %+6.4f %+6.4f %+6.4f", cdata.aileron, cdata.elevator, cdata.throttle, cdata.rudder);
/* swap and send it to FG */
swap64(&cdata.aileron);
swap64(&cdata.elevator);
swap64(&cdata.throttle);
swap64(&cdata.rudder);
sendto(fgSock, &cdata, sizeof(cdata), 0, (struct sockaddr *)&fgAddr, sizeof(fgAddr));
/* update our timestamp so that we don't re-request the stream */
lastRCMessage = now;
}
/* pass the message on to QGCS */
len = mavlink_msg_to_send_buffer(buf, msg);
sendto(qgcsSock, buf, len, 0, (struct sockaddr *)&qgcsAddr, sizeof(qgcsAddr));
}
/*
* QGS thread listens for datagrams from QGroundControl and forwards them out
* the serial port.
*/
void *
qgsThread(void *arg)
{
struct fgIMUData msg;
ssize_t received;
uint8_t buf[1024];
int sent, result;
/* do not take signals on this thread */
pthread_sigmask(SIG_BLOCK, NULL, NULL);
log(QGCS, "Listening for QGroundControl data on port %d", QGCS_LISTEN_PORT);
while (!gShouldQuit) {
/* get a message */
received = recvfrom(qgcsSock, buf, sizeof(buf), MSG_WAITALL, NULL, NULL);
/* XXX might want to intercept messages here that would turn off data that we need */
/* and forward it */
pthread_mutex_lock(&portMutex);
sent = 0;
while (sent < received) {
if (gShouldQuit)
break;
result = write(port, buf + sent, received - sent);
if (result < 0) {
if (result == EAGAIN)
continue;
warn("serial passthrough write failed");
goto abort;
}
if (result == 0) {
warnx("serial port closed");
goto abort;
}
sent += result;
}
pthread_mutex_unlock(&portMutex);
}
abort:
shouldQuit(0);
return(NULL);
}
void comm_send_ch(mavlink_channel_t chan, uint8_t ch)
{
if (write(port, &ch, 1) != 1)
warn("serial packet write failed");
}
void
swap32(void *p)
{
*(int32_t *)p = htonl(*(int32_t *)p);
}
union temp64 {
int64_t ll;
int32_t l[2];
};
void
swap64(void *p)
{
union temp64 *f, t;
f = (union temp64 *)p;
t.l[0] = htonl(f->l[1]);
t.l[1] = htonl(f->l[0]);
f->ll = t.ll;
}
void
hexdump(void *p, size_t s)
{
int i, j, lim;
uint8_t *c = (uint8_t *)p;
for (i = 0; i < s; i += 32) {
printf("%04x:", i);
lim = s - i;
if (lim > 32)
lim = 32;
for (j = 0; j < lim; j++)
printf(" %02x", *c++);
printf("\n");
}
}