ardupilot/apo/QuadArducopter.h

103 lines
3.3 KiB
C
Raw Normal View History

2011-09-28 21:51:12 -03:00
/*
* QuadArducopter.h
*
* Created on: May 1, 2011
* Author: jgoppert
*/
#ifndef QUADARDUCOPTER_H_
#define QUADARDUCOPTER_H_
// vehicle options
static const apo::vehicle_t vehicle = apo::VEHICLE_QUAD;
static const apo::halMode_t halMode = apo::MODE_LIVE;
static const apo::board_t board = apo::BOARD_ARDUPILOTMEGA_1280;
2011-09-28 21:51:12 -03:00
static const uint8_t heartBeatTimeout = 3;
// algorithm selection
#define CONTROLLER_CLASS ControllerQuad
#define GUIDE_CLASS MavlinkGuide
#define NAVIGATOR_CLASS DcmNavigator
#define COMMLINK_CLASS MavlinkComm
// hardware selection
#define ADC_CLASS AP_ADC_ADS7844
#define COMPASS_CLASS AP_Compass_HMC5843
#define BARO_CLASS APM_BMP085_Class
#define RANGE_FINDER_CLASS AP_RangeFinder_MaxsonarXL
// baud rates
static uint32_t debugBaud = 57600;
static uint32_t telemBaud = 57600;
static uint32_t gpsBaud = 38400;
static uint32_t hilBaud = 57600;
2011-09-28 21:51:12 -03:00
// optional sensors
static const bool gpsEnabled = false;
static const bool baroEnabled = false;
static const bool compassEnabled = true;
static const Matrix3f compassOrientation = AP_COMPASS_COMPONENTS_UP_PINS_FORWARD;
// compass orientation: See AP_Compass_HMC5843.h for possible values
2011-09-28 21:51:12 -03:00
static const bool rangeFinderFrontEnabled = false;
static const bool rangeFinderBackEnabled = false;
static const bool rangeFinderLeftEnabled = false;
static const bool rangeFinderRightEnabled = false;
static const bool rangeFinderUpEnabled = false;
static const bool rangeFinderDownEnabled = false;
2011-09-28 21:51:12 -03:00
// loop rates
static const float loop0Rate = 150;
static const float loop1Rate = 100;
static const float loop2Rate = 10;
static const float loop3Rate = 1;
static const float loop4Rate = 0.1;
//motor parameters
static const float MOTOR_MAX = 1;
static const float MOTOR_MIN = 0.1;
// position control loop
static const float PID_POS_INTERVAL = 1 / 100; // 5 hz
static const float PID_POS_P = 0;
static const float PID_POS_I = 0;
static const float PID_POS_D = 0;
static const float PID_POS_LIM = 0; // about 5 deg
static const float PID_POS_AWU = 0; // about 5 deg
static const float PID_POS_Z_P = 0;
static const float PID_POS_Z_I = 0;
static const float PID_POS_Z_D = 0;
static const float PID_POS_Z_LIM = 0;
static const float PID_POS_Z_AWU = 0;
// attitude control loop
static const float PID_ATT_INTERVAL = 1 / 100; // 100 hz
static const float PID_ATT_P = 0.1; // 0.1
static const float PID_ATT_I = 0; // 0.0
static const float PID_ATT_D = 0.1; // 0.1
static const float PID_ATT_LIM = 1; // 0.01 // 10 % #define MOTORs
static const float PID_ATT_AWU = 0; // 0.0
static const float PID_YAWPOS_P = 0;
static const float PID_YAWPOS_I = 0;
static const float PID_YAWPOS_D = 0;
static const float PID_YAWPOS_LIM = 0; // 1 rad/s
static const float PID_YAWPOS_AWU = 0; // 1 rad/s
static const float PID_YAWSPEED_P = .2;
static const float PID_YAWSPEED_I = 0;
static const float PID_YAWSPEED_D = 0;
static const float PID_YAWSPEED_LIM = .3; // 0.01 // 10 % MOTORs
static const float PID_YAWSPEED_AWU = 0.0;
static const float PID_YAWSPEED_DFCUT = 3.0; // 3 Radians, about 1 Hz
// mixing
static const float MIX_REMOTE_WEIGHT = 1;
static const float MIX_POSITION_WEIGHT = 1;
static const float MIX_POSITION_Z_WEIGHT = 1;
static const float MIX_POSITION_YAW_WEIGHT = 1;
static const float THRUST_HOVER_OFFSET = 0.475;
#include "ControllerQuad.h"
#endif /* QUADARDUCOPTER_H_ */