cpython/Doc/ext/newtypes.tex

1449 lines
49 KiB
TeX

\chapter{Defining New Types
\label{defining-new-types}}
\sectionauthor{Michael Hudson}{mwh@python.net}
\sectionauthor{Dave Kuhlman}{dkuhlman@rexx.com}
\sectionauthor{Jim Fulton}{jim@zope.com}
As mentioned in the last chapter, Python allows the writer of an
extension module to define new types that can be manipulated from
Python code, much like strings and lists in core Python.
This is not hard; the code for all extension types follows a pattern,
but there are some details that you need to understand before you can
get started.
\begin{notice}
The way new types are defined changed dramatically (and for the
better) in Python 2.2. This document documents how to define new
types for Python 2.2 and later. If you need to support older
versions of Python, you will need to refer to older versions of this
documentation.
\end{notice}
\section{The Basics
\label{dnt-basics}}
The Python runtime sees all Python objects as variables of type
\ctype{PyObject*}. A \ctype{PyObject} is not a very magnificent
object - it just contains the refcount and a pointer to the object's
``type object''. This is where the action is; the type object
determines which (C) functions get called when, for instance, an
attribute gets looked up on an object or it is multiplied by another
object. These C functions are called ``type methods'' to distinguish
them from things like \code{[].append} (which we call ``object
methods'').
So, if you want to define a new object type, you need to create a new
type object.
This sort of thing can only be explained by example, so here's a
minimal, but complete, module that defines a new type:
\verbatiminput{noddy.c}
Now that's quite a bit to take in at once, but hopefully bits will
seem familiar from the last chapter.
The first bit that will be new is:
\begin{verbatim}
typedef struct {
PyObject_HEAD
} noddy_NoddyObject;
\end{verbatim}
This is what a Noddy object will contain---in this case, nothing more
than every Python object contains, namely a refcount and a pointer to a type
object. These are the fields the \code{PyObject_HEAD} macro brings
in. The reason for the macro is to standardize the layout and to
enable special debugging fields in debug builds. Note that there is
no semicolon after the \code{PyObject_HEAD} macro; one is included in
the macro definition. Be wary of adding one by accident; it's easy to
do from habit, and your compiler might not complain, but someone
else's probably will! (On Windows, MSVC is known to call this an
error and refuse to compile the code.)
For contrast, let's take a look at the corresponding definition for
standard Python integers:
\begin{verbatim}
typedef struct {
PyObject_HEAD
long ob_ival;
} PyIntObject;
\end{verbatim}
Moving on, we come to the crunch --- the type object.
\begin{verbatim}
static PyTypeObject noddy_NoddyType = {
PyObject_HEAD_INIT(NULL)
0, /*ob_size*/
"noddy.Noddy", /*tp_name*/
sizeof(noddy_NoddyObject), /*tp_basicsize*/
0, /*tp_itemsize*/
0, /*tp_dealloc*/
0, /*tp_print*/
0, /*tp_getattr*/
0, /*tp_setattr*/
0, /*tp_compare*/
0, /*tp_repr*/
0, /*tp_as_number*/
0, /*tp_as_sequence*/
0, /*tp_as_mapping*/
0, /*tp_hash */
0, /*tp_call*/
0, /*tp_str*/
0, /*tp_getattro*/
0, /*tp_setattro*/
0, /*tp_as_buffer*/
Py_TPFLAGS_DEFAULT, /*tp_flags*/
"Noddy objects", /* tp_doc */
};
\end{verbatim}
Now if you go and look up the definition of \ctype{PyTypeObject} in
\file{object.h} you'll see that it has many more fields that the
definition above. The remaining fields will be filled with zeros by
the C compiler, and it's common practice to not specify them
explicitly unless you need them.
This is so important that we're going to pick the top of it apart still
further:
\begin{verbatim}
PyObject_HEAD_INIT(NULL)
\end{verbatim}
This line is a bit of a wart; what we'd like to write is:
\begin{verbatim}
PyObject_HEAD_INIT(&PyType_Type)
\end{verbatim}
as the type of a type object is ``type'', but this isn't strictly
conforming C and some compilers complain. Fortunately, this member
will be filled in for us by \cfunction{PyType_Ready()}.
\begin{verbatim}
0, /* ob_size */
\end{verbatim}
The \member{ob_size} field of the header is not used; its presence in
the type structure is a historical artifact that is maintained for
binary compatibility with extension modules compiled for older
versions of Python. Always set this field to zero.
\begin{verbatim}
"noddy.Noddy", /* tp_name */
\end{verbatim}
The name of our type. This will appear in the default textual
representation of our objects and in some error messages, for example:
\begin{verbatim}
>>> "" + noddy.new_noddy()
Traceback (most recent call last):
File "<stdin>", line 1, in ?
TypeError: cannot add type "noddy.Noddy" to string
\end{verbatim}
Note that the name is a dotted name that includes both the module name
and the name of the type within the module. The module in this case is
\module{noddy} and the type is \class{Noddy}, so we set the type name
to \class{noddy.Noddy}.
\begin{verbatim}
sizeof(noddy_NoddyObject), /* tp_basicsize */
\end{verbatim}
This is so that Python knows how much memory to allocate when you call
\cfunction{PyObject_New()}.
\note{If you want your type to be subclassable from Python, and your
type has the same \member{tp_basicsize} as its base type, you may
have problems with multiple inheritance. A Python subclass of your
type will have to list your type first in its \member{__bases__}, or
else it will not be able to call your type's \method{__new__} method
without getting an error. You can avoid this problem by ensuring
that your type has a larger value for \member{tp_basicsize} than
its base type does. Most of the time, this will be true anyway,
because either your base type will be \class{object}, or else you will
be adding data members to your base type, and therefore increasing its
size.}
\begin{verbatim}
0, /* tp_itemsize */
\end{verbatim}
This has to do with variable length objects like lists and strings.
Ignore this for now.
Skipping a number of type methods that we don't provide, we set the
class flags to \constant{Py_TPFLAGS_DEFAULT}.
\begin{verbatim}
Py_TPFLAGS_DEFAULT, /*tp_flags*/
\end{verbatim}
All types should include this constant in their flags. It enables all
of the members defined by the current version of Python.
We provide a doc string for the type in \member{tp_doc}.
\begin{verbatim}
"Noddy objects", /* tp_doc */
\end{verbatim}
Now we get into the type methods, the things that make your objects
different from the others. We aren't going to implement any of these
in this version of the module. We'll expand this example later to
have more interesting behavior.
For now, all we want to be able to do is to create new \class{Noddy}
objects. To enable object creation, we have to provide a
\member{tp_new} implementation. In this case, we can just use the
default implementation provided by the API function
\cfunction{PyType_GenericNew()}. We'd like to just assign this to the
\member{tp_new} slot, but we can't, for portability sake, On some
platforms or compilers, we can't statically initialize a structure
member with a function defined in another C module, so, instead, we'll
assign the \member{tp_new} slot in the module initialization function
just before calling \cfunction{PyType_Ready()}:
\begin{verbatim}
noddy_NoddyType.tp_new = PyType_GenericNew;
if (PyType_Ready(&noddy_NoddyType) < 0)
return;
\end{verbatim}
All the other type methods are \NULL, so we'll go over them later
--- that's for a later section!
Everything else in the file should be familiar, except for some code
in \cfunction{initnoddy()}:
\begin{verbatim}
if (PyType_Ready(&noddy_NoddyType) < 0)
return;
\end{verbatim}
This initializes the \class{Noddy} type, filing in a number of
members, including \member{ob_type} that we initially set to \NULL.
\begin{verbatim}
PyModule_AddObject(m, "Noddy", (PyObject *)&noddy_NoddyType);
\end{verbatim}
This adds the type to the module dictionary. This allows us to create
\class{Noddy} instances by calling the \class{Noddy} class:
\begin{verbatim}
import noddy
mynoddy = noddy.Noddy()
\end{verbatim}
That's it! All that remains is to build it; put the above code in a
file called \file{noddy.c} and
\begin{verbatim}
from distutils.core import setup, Extension
setup(name="noddy", version="1.0",
ext_modules=[Extension("noddy", ["noddy.c"])])
\end{verbatim}
in a file called \file{setup.py}; then typing
\begin{verbatim}
$ python setup.py build
\end{verbatim} %$ <-- bow to font-lock ;-(
at a shell should produce a file \file{noddy.so} in a subdirectory;
move to that directory and fire up Python --- you should be able to
\code{import noddy} and play around with Noddy objects.
That wasn't so hard, was it?
Of course, the current Noddy type is pretty uninteresting. It has no
data and doesn't do anything. It can't even be subclassed.
\subsection{Adding data and methods to the Basic example}
Let's expend the basic example to add some data and methods. Let's
also make the type usable as a base class. We'll create
a new module, \module{noddy2} that adds these capabilities:
\verbatiminput{noddy2.c}
This version of the module has a number of changes.
We've added an extra include:
\begin{verbatim}
#include "structmember.h"
\end{verbatim}
This include provides declarations that we use to handle attributes,
as described a bit later.
The name of the \class{Noddy} object structure has been shortened to
\class{Noddy}. The type object name has been shortened to
\class{NoddyType}.
The \class{Noddy} type now has three data attributes, \var{first},
\var{last}, and \var{number}. The \var{first} and \var{last}
variables are Python strings containing first and last names. The
\var{number} attribute is an integer.
The object structure is updated accordingly:
\begin{verbatim}
typedef struct {
PyObject_HEAD
PyObject *first;
PyObject *last;
int number;
} Noddy;
\end{verbatim}
Because we now have data to manage, we have to be more careful about
object allocation and deallocation. At a minimum, we need a
deallocation method:
\begin{verbatim}
static void
Noddy_dealloc(Noddy* self)
{
Py_XDECREF(self->first);
Py_XDECREF(self->last);
self->ob_type->tp_free((PyObject*)self);
}
\end{verbatim}
which is assigned to the \member{tp_dealloc} member:
\begin{verbatim}
(destructor)Noddy_dealloc, /*tp_dealloc*/
\end{verbatim}
This method decrements the reference counts of the two Python
attributes. We use \cfunction{Py_XDECREF()} here because the
\member{first} and \member{last} members could be \NULL. It then
calls the \member{tp_free} member of the object's type to free the
object's memory. Note that the object's type might not be
\class{NoddyType}, because the object may be an instance of a
subclass.
We want to make sure that the first and last names are initialized to
empty strings, so we provide a new method:
\begin{verbatim}
static PyObject *
Noddy_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
{
Noddy *self;
self = (Noddy *)type->tp_alloc(type, 0);
if (self != NULL) {
self->first = PyString_FromString("");
if (self->first == NULL)
{
Py_DECREF(self);
return NULL;
}
self->last = PyString_FromString("");
if (self->last == NULL)
{
Py_DECREF(self);
return NULL;
}
self->number = 0;
}
return (PyObject *)self;
}
\end{verbatim}
and install it in the \member{tp_new} member:
\begin{verbatim}
Noddy_new, /* tp_new */
\end{verbatim}
The new member is responsible for creating (as opposed to
initializing) objects of the type. It is exposed in Python as the
\method{__new__()} method. See the paper titled ``Unifying types and
classes in Python'' for a detailed discussion of the \method{__new__()}
method. One reason to implement a new method is to assure the initial
values of instance variables. In this case, we use the new method to
make sure that the initial values of the members \member{first} and
\member{last} are not \NULL. If we didn't care whether the initial
values were \NULL, we could have used \cfunction{PyType_GenericNew()} as
our new method, as we did before. \cfunction{PyType_GenericNew()}
initializes all of the instance variable members to NULLs.
The new method is a static method that is passed the type being
instantiated and any arguments passed when the type was called,
and that returns the new object created. New methods always accept
positional and keyword arguments, but they often ignore the arguments,
leaving the argument handling to initializer methods. Note that if the
type supports subclassing, the type passed may not be the type being
defined. The new method calls the tp_alloc slot to allocate memory.
We don't fill the \member{tp_alloc} slot ourselves. Rather
\cfunction{PyType_Ready()} fills it for us by inheriting it from our
base class, which is \class{object} by default. Most types use the
default allocation.
\note{If you are creating a co-operative \member{tp_new} (one that
calls a base type's \member{tp_new} or \method{__new__}), you
must \emph{not} try to determine what method to call using
method resolution order at runtime. Always statically determine
what type you are going to call, and call its \member{tp_new}
directly, or via \code{type->tp_base->tp_new}. If you do
not do this, Python subclasses of your type that also inherit
from other Python-defined classes may not work correctly.
(Specifically, you may not be able to create instances of
such subclasses without getting a \exception{TypeError}.)}
We provide an initialization function:
\begin{verbatim}
static int
Noddy_init(Noddy *self, PyObject *args, PyObject *kwds)
{
PyObject *first=NULL, *last=NULL;
static char *kwlist[] = {"first", "last", "number", NULL};
if (! PyArg_ParseTupleAndKeywords(args, kwds, "|OOi", kwlist,
&first, &last,
&self->number))
return -1;
if (first) {
Py_XDECREF(self->first);
Py_INCREF(first);
self->first = first;
}
if (last) {
Py_XDECREF(self->last);
Py_INCREF(last);
self->last = last;
}
return 0;
}
\end{verbatim}
by filling the \member{tp_init} slot.
\begin{verbatim}
(initproc)Noddy_init, /* tp_init */
\end{verbatim}
The \member{tp_init} slot is exposed in Python as the
\method{__init__()} method. It is used to initialize an object after
it's created. Unlike the new method, we can't guarantee that the
initializer is called. The initializer isn't called when unpickling
objects and it can be overridden. Our initializer accepts arguments
to provide initial values for our instance. Initializers always accept
positional and keyword arguments.
We want to want to expose our instance variables as attributes. There
are a number of ways to do that. The simplest way is to define member
definitions:
\begin{verbatim}
static PyMemberDef Noddy_members[] = {
{"first", T_OBJECT_EX, offsetof(Noddy, first), 0,
"first name"},
{"last", T_OBJECT_EX, offsetof(Noddy, last), 0,
"last name"},
{"number", T_INT, offsetof(Noddy, number), 0,
"noddy number"},
{NULL} /* Sentinel */
};
\end{verbatim}
and put the definitions in the \member{tp_members} slot:
\begin{verbatim}
Noddy_members, /* tp_members */
\end{verbatim}
Each member definition has a member name, type, offset, access flags
and documentation string. See the ``Generic Attribute Management''
section below for details.
A disadvantage of this approach is that it doesn't provide a way to
restrict the types of objects that can be assigned to the Python
attributes. We expect the first and last names to be strings, but any
Python objects can be assigned. Further, the attributes can be
deleted, setting the C pointers to \NULL. Even though we can make
sure the members are initialized to non-\NULL{} values, the members can
be set to \NULL{} if the attributes are deleted.
We define a single method, \method{name}, that outputs the objects
name as the concatenation of the first and last names.
\begin{verbatim}
static PyObject *
Noddy_name(Noddy* self)
{
static PyObject *format = NULL;
PyObject *args, *result;
if (format == NULL) {
format = PyString_FromString("%s %s");
if (format == NULL)
return NULL;
}
if (self->first == NULL) {
PyErr_SetString(PyExc_AttributeError, "first");
return NULL;
}
if (self->last == NULL) {
PyErr_SetString(PyExc_AttributeError, "last");
return NULL;
}
args = Py_BuildValue("OO", self->first, self->last);
if (args == NULL)
return NULL;
result = PyString_Format(format, args);
Py_DECREF(args);
return result;
}
\end{verbatim}
The method is implemented as a C function that takes a \class{Noddy} (or
\class{Noddy} subclass) instance as the first argument. Methods
always take an instance as the first argument. Methods often take
positional and keyword arguments as well, but in this cased we don't
take any and don't need to accept a positional argument tuple or
keyword argument dictionary. This method is equivalent to the Python
method:
\begin{verbatim}
def name(self):
return "%s %s" % (self.first, self.last)
\end{verbatim}
Note that we have to check for the possibility that our \member{first}
and \member{last} members are \NULL. This is because they can be
deleted, in which case they are set to \NULL. It would be better to
prevent deletion of these attributes and to restrict the attribute
values to be strings. We'll see how to do that in the next section.
Now that we've defined the method, we need to create an array of
method definitions:
\begin{verbatim}
static PyMethodDef Noddy_methods[] = {
{"name", (PyCFunction)Noddy_name, METH_NOARGS,
"Return the name, combining the first and last name"
},
{NULL} /* Sentinel */
};
\end{verbatim}
and assign them to the \member{tp_methods} slot:
\begin{verbatim}
Noddy_methods, /* tp_methods */
\end{verbatim}
Note that we used the \constant{METH_NOARGS} flag to indicate that the
method is passed no arguments.
Finally, we'll make our type usable as a base class. We've written
our methods carefully so far so that they don't make any assumptions
about the type of the object being created or used, so all we need to
do is to add the \constant{Py_TPFLAGS_BASETYPE} to our class flag
definition:
\begin{verbatim}
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/
\end{verbatim}
We rename \cfunction{initnoddy()} to \cfunction{initnoddy2()}
and update the module name passed to \cfunction{Py_InitModule3()}.
Finally, we update our \file{setup.py} file to build the new module:
\begin{verbatim}
from distutils.core import setup, Extension
setup(name="noddy", version="1.0",
ext_modules=[
Extension("noddy", ["noddy.c"]),
Extension("noddy2", ["noddy2.c"]),
])
\end{verbatim}
\subsection{Providing finer control over data attributes}
In this section, we'll provide finer control over how the
\member{first} and \member{last} attributes are set in the
\class{Noddy} example. In the previous version of our module, the
instance variables \member{first} and \member{last} could be set to
non-string values or even deleted. We want to make sure that these
attributes always contain strings.
\verbatiminput{noddy3.c}
To provide greater control, over the \member{first} and \member{last}
attributes, we'll use custom getter and setter functions. Here are
the functions for getting and setting the \member{first} attribute:
\begin{verbatim}
Noddy_getfirst(Noddy *self, void *closure)
{
Py_INCREF(self->first);
return self->first;
}
static int
Noddy_setfirst(Noddy *self, PyObject *value, void *closure)
{
if (value == NULL) {
PyErr_SetString(PyExc_TypeError, "Cannot delete the first attribute");
return -1;
}
if (! PyString_Check(value)) {
PyErr_SetString(PyExc_TypeError,
"The first attribute value must be a string");
return -1;
}
Py_DECREF(self->first);
Py_INCREF(value);
self->first = value;
return 0;
}
\end{verbatim}
The getter function is passed a \class{Noddy} object and a
``closure'', which is void pointer. In this case, the closure is
ignored. (The closure supports an advanced usage in which definition
data is passed to the getter and setter. This could, for example, be
used to allow a single set of getter and setter functions that decide
the attribute to get or set based on data in the closure.)
The setter function is passed the \class{Noddy} object, the new value,
and the closure. The new value may be \NULL, in which case the
attribute is being deleted. In our setter, we raise an error if the
attribute is deleted or if the attribute value is not a string.
We create an array of \ctype{PyGetSetDef} structures:
\begin{verbatim}
static PyGetSetDef Noddy_getseters[] = {
{"first",
(getter)Noddy_getfirst, (setter)Noddy_setfirst,
"first name",
NULL},
{"last",
(getter)Noddy_getlast, (setter)Noddy_setlast,
"last name",
NULL},
{NULL} /* Sentinel */
};
\end{verbatim}
and register it in the \member{tp_getset} slot:
\begin{verbatim}
Noddy_getseters, /* tp_getset */
\end{verbatim}
to register out attribute getters and setters.
The last item in a \ctype{PyGetSetDef} structure is the closure
mentioned above. In this case, we aren't using the closure, so we just
pass \NULL.
We also remove the member definitions for these attributes:
\begin{verbatim}
static PyMemberDef Noddy_members[] = {
{"number", T_INT, offsetof(Noddy, number), 0,
"noddy number"},
{NULL} /* Sentinel */
};
\end{verbatim}
With these changes, we can assure that the \member{first} and
\member{last} members are never NULL so we can remove checks for \NULL
values in almost all cases. This means that most of the
\cfunction{Py_XDECREF()} calls can be converted to \cfunction{Py_DECREF()}
calls. The only place we can't change these calls is in the
deallocator, where there is the possibility that the initialization of
these members failed in the constructor.
We also rename the module initialization function and module name in
the initialization function, as we did before, and we add an extra
definition to the \file{setup.py} file.
\subsection{Supporting cyclic garbage collection}
Python has a cyclic-garbage collector that can identify unneeded
objects even when their reference counts are not zero. This can happen
when objects are involved in cycles. For example, consider:
\begin{verbatim}
>>> l = []
>>> l.append(l)
>>> del l
\end{verbatim}
In this example, we create a list that contains itself. When we delete
it, it still has a reference from itself. Its reference count doesn't
drop to zero. Fortunately, Python's cyclic-garbage collector will
eventually figure out that the list is garbage and free it.
In the second version of the \class{Noddy} example, we allowed any
kind of object to be stored in the \member{first} or \member{last}
attributes. This means that \class{Noddy} objects can participate in
cycles:
\begin{verbatim}
>>> import noddy2
>>> n = noddy2.Noddy()
>>> l = [n]
>>> n.first = l
\end{verbatim}
This is pretty silly, but it gives us an excuse to add support for the
cyclic-garbage collector to the \class{Noddy} example. To support
cyclic garbage collection, types need to fill two slots and set a
class flag that enables these slots:
\verbatiminput{noddy4.c}
The traversal method provides access to subobjects that
could participate in cycles:
\begin{verbatim}
static int
Noddy_traverse(Noddy *self, visitproc visit, void *arg)
{
if (self->first && visit(self->first, arg) < 0)
return -1;
if (self->last && visit(self->last, arg) < 0)
return -1;
return 0;
}
\end{verbatim}
For each subobject that can participate in cycles, we need to call the
\cfunction{visit()} function, which is passed to the traversal method.
The \cfunction{visit()} function takes as arguments the subobject and
the extra argument \var{arg} passed to the traversal method.
We also need to provide a method for clearing any subobjects that can
participate in cycles. We implement the method and reimplement the
deallocator to use it:
\begin{verbatim}
static int
Noddy_clear(Noddy *self)
{
Py_XDECREF(self->first);
self->first = NULL;
Py_XDECREF(self->last);
self->last = NULL;
return 0;
}
static void
Noddy_dealloc(Noddy* self)
{
Noddy_clear(self);
self->ob_type->tp_free((PyObject*)self);
}
\end{verbatim}
Finally, we add the \constant{Py_TPFLAGS_HAVE_GC} flag to the class
flags:
\begin{verbatim}
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | Py_TPFLAGS_HAVE_GC, /*tp_flags*/
\end{verbatim}
That's pretty much it. If we had written custom \member{tp_alloc} or
\member{tp_free} slots, we'd need to modify them for cyclic-garbage
collection. Most extensions will use the versions automatically
provided.
\section{Type Methods
\label{dnt-type-methods}}
This section aims to give a quick fly-by on the various type methods
you can implement and what they do.
Here is the definition of \ctype{PyTypeObject}, with some fields only
used in debug builds omitted:
\verbatiminput{typestruct.h}
Now that's a \emph{lot} of methods. Don't worry too much though - if
you have a type you want to define, the chances are very good that you
will only implement a handful of these.
As you probably expect by now, we're going to go over this and give
more information about the various handlers. We won't go in the order
they are defined in the structure, because there is a lot of
historical baggage that impacts the ordering of the fields; be sure
your type initializaion keeps the fields in the right order! It's
often easiest to find an example that includes all the fields you need
(even if they're initialized to \code{0}) and then change the values
to suit your new type.
\begin{verbatim}
char *tp_name; /* For printing */
\end{verbatim}
The name of the type - as mentioned in the last section, this will
appear in various places, almost entirely for diagnostic purposes.
Try to choose something that will be helpful in such a situation!
\begin{verbatim}
int tp_basicsize, tp_itemsize; /* For allocation */
\end{verbatim}
These fields tell the runtime how much memory to allocate when new
objects of this type are created. Python has some builtin support
for variable length structures (think: strings, lists) which is where
the \member{tp_itemsize} field comes in. This will be dealt with
later.
\begin{verbatim}
char *tp_doc;
\end{verbatim}
Here you can put a string (or its address) that you want returned when
the Python script references \code{obj.__doc__} to retrieve the
docstring.
Now we come to the basic type methods---the ones most extension types
will implement.
\subsection{Finalization and De-allocation}
\index{object!deallocation}
\index{deallocation, object}
\index{object!finalization}
\index{finalization, of objects}
\begin{verbatim}
destructor tp_dealloc;
\end{verbatim}
This function is called when the reference count of the instance of
your type is reduced to zero and the Python interpreter wants to
reclaim it. If your type has memory to free or other clean-up to
perform, put it here. The object itself needs to be freed here as
well. Here is an example of this function:
\begin{verbatim}
static void
newdatatype_dealloc(newdatatypeobject * obj)
{
free(obj->obj_UnderlyingDatatypePtr);
obj->ob_type->tp_free(obj);
}
\end{verbatim}
One important requirement of the deallocator function is that it
leaves any pending exceptions alone. This is important since
deallocators are frequently called as the interpreter unwinds the
Python stack; when the stack is unwound due to an exception (rather
than normal returns), nothing is done to protect the deallocators from
seeing that an exception has already been set. Any actions which a
deallocator performs which may cause additional Python code to be
executed may detect that an exception has been set. This can lead to
misleading errors from the interpreter. The proper way to protect
against this is to save a pending exception before performing the
unsafe action, and restoring it when done. This can be done using the
\cfunction{PyErr_Fetch()}\ttindex{PyErr_Fetch()} and
\cfunction{PyErr_Restore()}\ttindex{PyErr_Restore()} functions:
\begin{verbatim}
static void
my_dealloc(PyObject *obj)
{
MyObject *self = (MyObject *) obj;
PyObject *cbresult;
if (self->my_callback != NULL) {
PyObject *err_type, *err_value, *err_traceback;
int have_error = PyErr_Occurred() ? 1 : 0;
if (have_error)
PyErr_Fetch(&err_type, &err_value, &err_traceback);
cbresult = PyObject_CallObject(self->my_callback, NULL);
if (cbresult == NULL)
PyErr_WriteUnraisable();
else
Py_DECREF(cbresult);
if (have_error)
PyErr_Restore(err_type, err_value, err_traceback);
Py_DECREF(self->my_callback);
}
obj->ob_type->tp_free((PyObject*)self);
}
\end{verbatim}
\subsection{Object Presentation}
In Python, there are three ways to generate a textual representation
of an object: the \function{repr()}\bifuncindex{repr} function (or
equivalent backtick syntax), the \function{str()}\bifuncindex{str}
function, and the \keyword{print} statement. For most objects, the
\keyword{print} statement is equivalent to the \function{str()}
function, but it is possible to special-case printing to a
\ctype{FILE*} if necessary; this should only be done if efficiency is
identified as a problem and profiling suggests that creating a
temporary string object to be written to a file is too expensive.
These handlers are all optional, and most types at most need to
implement the \member{tp_str} and \member{tp_repr} handlers.
\begin{verbatim}
reprfunc tp_repr;
reprfunc tp_str;
printfunc tp_print;
\end{verbatim}
The \member{tp_repr} handler should return a string object containing
a representation of the instance for which it is called. Here is a
simple example:
\begin{verbatim}
static PyObject *
newdatatype_repr(newdatatypeobject * obj)
{
return PyString_FromFormat("Repr-ified_newdatatype{{size:\%d}}",
obj->obj_UnderlyingDatatypePtr->size);
}
\end{verbatim}
If no \member{tp_repr} handler is specified, the interpreter will
supply a representation that uses the type's \member{tp_name} and a
uniquely-identifying value for the object.
The \member{tp_str} handler is to \function{str()} what the
\member{tp_repr} handler described above is to \function{repr()}; that
is, it is called when Python code calls \function{str()} on an
instance of your object. Its implementation is very similar to the
\member{tp_repr} function, but the resulting string is intended for
human consumption. If \member{tp_str} is not specified, the
\member{tp_repr} handler is used instead.
Here is a simple example:
\begin{verbatim}
static PyObject *
newdatatype_str(newdatatypeobject * obj)
{
return PyString_FromFormat("Stringified_newdatatype{{size:\%d}}",
obj->obj_UnderlyingDatatypePtr->size);
}
\end{verbatim}
The print function will be called whenever Python needs to "print" an
instance of the type. For example, if 'node' is an instance of type
TreeNode, then the print function is called when Python code calls:
\begin{verbatim}
print node
\end{verbatim}
There is a flags argument and one flag, \constant{Py_PRINT_RAW}, and
it suggests that you print without string quotes and possibly without
interpreting escape sequences.
The print function receives a file object as an argument. You will
likely want to write to that file object.
Here is a sampe print function:
\begin{verbatim}
static int
newdatatype_print(newdatatypeobject *obj, FILE *fp, int flags)
{
if (flags & Py_PRINT_RAW) {
fprintf(fp, "<{newdatatype object--size: %d}>",
obj->obj_UnderlyingDatatypePtr->size);
}
else {
fprintf(fp, "\"<{newdatatype object--size: %d}>\"",
obj->obj_UnderlyingDatatypePtr->size);
}
return 0;
}
\end{verbatim}
\subsection{Attribute Management}
For every object which can support attributes, the corresponding type
must provide the functions that control how the attributes are
resolved. There needs to be a function which can retrieve attributes
(if any are defined), and another to set attributes (if setting
attributes is allowed). Removing an attribute is a special case, for
which the new value passed to the handler is \NULL.
Python supports two pairs of attribute handlers; a type that supports
attributes only needs to implement the functions for one pair. The
difference is that one pair takes the name of the attribute as a
\ctype{char*}, while the other accepts a \ctype{PyObject*}. Each type
can use whichever pair makes more sense for the implementation's
convenience.
\begin{verbatim}
getattrfunc tp_getattr; /* char * version */
setattrfunc tp_setattr;
/* ... */
getattrofunc tp_getattrofunc; /* PyObject * version */
setattrofunc tp_setattrofunc;
\end{verbatim}
If accessing attributes of an object is always a simple operation
(this will be explained shortly), there are generic implementations
which can be used to provide the \ctype{PyObject*} version of the
attribute management functions. The actual need for type-specific
attribute handlers almost completely disappeared starting with Python
2.2, though there are many examples which have not been updated to use
some of the new generic mechanism that is available.
\subsubsection{Generic Attribute Management}
\versionadded{2.2}
Most extension types only use \emph{simple} attributes. So, what
makes the attributes simple? There are only a couple of conditions
that must be met:
\begin{enumerate}
\item The name of the attributes must be known when
\cfunction{PyType_Ready()} is called.
\item No special processing is needed to record that an attribute
was looked up or set, nor do actions need to be taken based
on the value.
\end{enumerate}
Note that this list does not place any restrictions on the values of
the attributes, when the values are computed, or how relevant data is
stored.
When \cfunction{PyType_Ready()} is called, it uses three tables
referenced by the type object to create \emph{descriptors} which are
placed in the dictionary of the type object. Each descriptor controls
access to one attribute of the instance object. Each of the tables is
optional; if all three are \NULL, instances of the type will only have
attributes that are inherited from their base type, and should leave
the \member{tp_getattro} and \member{tp_setattro} fields \NULL{} as
well, allowing the base type to handle attributes.
The tables are declared as three fields of the type object:
\begin{verbatim}
struct PyMethodDef *tp_methods;
struct PyMemberDef *tp_members;
struct PyGetSetDef *tp_getset;
\end{verbatim}
If \member{tp_methods} is not \NULL, it must refer to an array of
\ctype{PyMethodDef} structures. Each entry in the table is an
instance of this structure:
\begin{verbatim}
typedef struct PyMethodDef {
char *ml_name; /* method name */
PyCFunction ml_meth; /* implementation function */
int ml_flags; /* flags */
char *ml_doc; /* docstring */
} PyMethodDef;
\end{verbatim}
One entry should be defined for each method provided by the type; no
entries are needed for methods inherited from a base type. One
additional entry is needed at the end; it is a sentinel that marks the
end of the array. The \member{ml_name} field of the sentinel must be
\NULL.
XXX Need to refer to some unified discussion of the structure fields,
shared with the next section.
The second table is used to define attributes which map directly to
data stored in the instance. A variety of primitive C types are
supported, and access may be read-only or read-write. The structures
in the table are defined as:
\begin{verbatim}
typedef struct PyMemberDef {
char *name;
int type;
int offset;
int flags;
char *doc;
} PyMemberDef;
\end{verbatim}
For each entry in the table, a descriptor will be constructed and
added to the type which will be able to extract a value from the
instance structure. The \member{type} field should contain one of the
type codes defined in the \file{structmember.h} header; the value will
be used to determine how to convert Python values to and from C
values. The \member{flags} field is used to store flags which control
how the attribute can be accessed.
XXX Need to move some of this to a shared section!
The following flag constants are defined in \file{structmember.h};
they may be combined using bitwise-OR.
\begin{tableii}{l|l}{constant}{Constant}{Meaning}
\lineii{READONLY \ttindex{READONLY}}
{Never writable.}
\lineii{RO \ttindex{RO}}
{Shorthand for \constant{READONLY}.}
\lineii{READ_RESTRICTED \ttindex{READ_RESTRICTED}}
{Not readable in restricted mode.}
\lineii{WRITE_RESTRICTED \ttindex{WRITE_RESTRICTED}}
{Not writable in restricted mode.}
\lineii{RESTRICTED \ttindex{RESTRICTED}}
{Not readable or writable in restricted mode.}
\end{tableii}
An interesting advantage of using the \member{tp_members} table to
build descriptors that are used at runtime is that any attribute
defined this way can have an associated docstring simply by providing
the text in the table. An application can use the introspection API
to retrieve the descriptor from the class object, and get the
docstring using its \member{__doc__} attribute.
As with the \member{tp_methods} table, a sentinel entry with a
\member{name} value of \NULL{} is required.
% XXX Descriptors need to be explained in more detail somewhere, but
% not here.
%
% Descriptor objects have two handler functions which correspond to
% the \member{tp_getattro} and \member{tp_setattro} handlers. The
% \method{__get__()} handler is a function which is passed the
% descriptor, instance, and type objects, and returns the value of the
% attribute, or it returns \NULL{} and sets an exception. The
% \method{__set__()} handler is passed the descriptor, instance, type,
% and new value;
\subsubsection{Type-specific Attribute Management}
For simplicity, only the \ctype{char*} version will be demonstrated
here; the type of the name parameter is the only difference between
the \ctype{char*} and \ctype{PyObject*} flavors of the interface.
This example effectively does the same thing as the generic example
above, but does not use the generic support added in Python 2.2. The
value in showing this is two-fold: it demonstrates how basic attribute
management can be done in a way that is portable to older versions of
Python, and explains how the handler functions are called, so that if
you do need to extend their functionality, you'll understand what
needs to be done.
The \member{tp_getattr} handler is called when the object requires an
attribute look-up. It is called in the same situations where the
\method{__getattr__()} method of a class would be called.
A likely way to handle this is (1) to implement a set of functions
(such as \cfunction{newdatatype_getSize()} and
\cfunction{newdatatype_setSize()} in the example below), (2) provide a
method table listing these functions, and (3) provide a getattr
function that returns the result of a lookup in that table. The
method table uses the same structure as the \member{tp_methods} field
of the type object.
Here is an example:
\begin{verbatim}
static PyMethodDef newdatatype_methods[] = {
{"getSize", (PyCFunction)newdatatype_getSize, METH_VARARGS,
"Return the current size."},
{"setSize", (PyCFunction)newdatatype_setSize, METH_VARARGS,
"Set the size."},
{NULL, NULL, 0, NULL} /* sentinel */
};
static PyObject *
newdatatype_getattr(newdatatypeobject *obj, char *name)
{
return Py_FindMethod(newdatatype_methods, (PyObject *)obj, name);
}
\end{verbatim}
The \member{tp_setattr} handler is called when the
\method{__setattr__()} or \method{__delattr__()} method of a class
instance would be called. When an attribute should be deleted, the
third parameter will be \NULL. Here is an example that simply raises
an exception; if this were really all you wanted, the
\member{tp_setattr} handler should be set to \NULL.
\begin{verbatim}
static int
newdatatype_setattr(newdatatypeobject *obj, char *name, PyObject *v)
{
(void)PyErr_Format(PyExc_RuntimeError, "Read-only attribute: \%s", name);
return -1;
}
\end{verbatim}
\subsection{Object Comparison}
\begin{verbatim}
cmpfunc tp_compare;
\end{verbatim}
The \member{tp_compare} handler is called when comparisons are needed
and the object does not implement the specific rich comparison method
which matches the requested comparison. (It is always used if defined
and the \cfunction{PyObject_Compare()} or \cfunction{PyObject_Cmp()}
functions are used, or if \function{cmp()} is used from Python.)
It is analogous to the \method{__cmp__()} method. This function
should return \code{-1} if \var{obj1} is less than
\var{obj2}, \code{0} if they are equal, and \code{1} if
\var{obj1} is greater than
\var{obj2}.
(It was previously allowed to return arbitrary negative or positive
integers for less than and greater than, respectively; as of Python
2.2, this is no longer allowed. In the future, other return values
may be assigned a different meaning.)
A \member{tp_compare} handler may raise an exception. In this case it
should return a negative value. The caller has to test for the
exception using \cfunction{PyErr_Occurred()}.
Here is a sample implementation:
\begin{verbatim}
static int
newdatatype_compare(newdatatypeobject * obj1, newdatatypeobject * obj2)
{
long result;
if (obj1->obj_UnderlyingDatatypePtr->size <
obj2->obj_UnderlyingDatatypePtr->size) {
result = -1;
}
else if (obj1->obj_UnderlyingDatatypePtr->size >
obj2->obj_UnderlyingDatatypePtr->size) {
result = 1;
}
else {
result = 0;
}
return result;
}
\end{verbatim}
\subsection{Abstract Protocol Support}
Python supports a variety of \emph{abstract} `protocols;' the specific
interfaces provided to use these interfaces are documented in the
\citetitle[../api/api.html]{Python/C API Reference Manual} in the
chapter ``\ulink{Abstract Objects Layer}{../api/abstract.html}.''
A number of these abstract interfaces were defined early in the
development of the Python implementation. In particular, the number,
mapping, and sequence protocols have been part of Python since the
beginning. Other protocols have been added over time. For protocols
which depend on several handler routines from the type implementation,
the older protocols have been defined as optional blocks of handlers
referenced by the type object. For newer protocols there are
additional slots in the main type object, with a flag bit being set to
indicate that the slots are present and should be checked by the
interpreter. (The flag bit does not indicate that the slot values are
non-\NULL. The flag may be set to indicate the presense of a slot,
but a slot may still be unfilled.)
\begin{verbatim}
PyNumberMethods tp_as_number;
PySequenceMethods tp_as_sequence;
PyMappingMethods tp_as_mapping;
\end{verbatim}
If you wish your object to be able to act like a number, a sequence,
or a mapping object, then you place the address of a structure that
implements the C type \ctype{PyNumberMethods},
\ctype{PySequenceMethods}, or \ctype{PyMappingMethods}, respectively.
It is up to you to fill in this structure with appropriate values. You
can find examples of the use of each of these in the \file{Objects}
directory of the Python source distribution.
\begin{verbatim}
hashfunc tp_hash;
\end{verbatim}
This function, if you choose to provide it, should return a hash
number for an instance of your datatype. Here is a moderately
pointless example:
\begin{verbatim}
static long
newdatatype_hash(newdatatypeobject *obj)
{
long result;
result = obj->obj_UnderlyingDatatypePtr->size;
result = result * 3;
return result;
}
\end{verbatim}
\begin{verbatim}
ternaryfunc tp_call;
\end{verbatim}
This function is called when an instance of your datatype is "called",
for example, if \code{obj1} is an instance of your datatype and the Python
script contains \code{obj1('hello')}, the \member{tp_call} handler is
invoked.
This function takes three arguments:
\begin{enumerate}
\item
\var{arg1} is the instance of the datatype which is the subject of
the call. If the call is \code{obj1('hello')}, then \var{arg1} is
\code{obj1}.
\item
\var{arg2} is a tuple containing the arguments to the call. You
can use \cfunction{PyArg_ParseTuple()} to extract the arguments.
\item
\var{arg3} is a dictionary of keyword arguments that were passed.
If this is non-\NULL{} and you support keyword arguments, use
\cfunction{PyArg_ParseTupleAndKeywords()} to extract the
arguments. If you do not want to support keyword arguments and
this is non-\NULL, raise a \exception{TypeError} with a message
saying that keyword arguments are not supported.
\end{enumerate}
Here is a desultory example of the implementation of the call function.
\begin{verbatim}
/* Implement the call function.
* obj1 is the instance receiving the call.
* obj2 is a tuple containing the arguments to the call, in this
* case 3 strings.
*/
static PyObject *
newdatatype_call(newdatatypeobject *obj, PyObject *args, PyObject *other)
{
PyObject *result;
char *arg1;
char *arg2;
char *arg3;
if (!PyArg_ParseTuple(args, "sss:call", &arg1, &arg2, &arg3)) {
return NULL;
}
result = PyString_FromFormat(
"Returning -- value: [\%d] arg1: [\%s] arg2: [\%s] arg3: [\%s]\n",
obj->obj_UnderlyingDatatypePtr->size,
arg1, arg2, arg3);
printf("\%s", PyString_AS_STRING(result));
return result;
}
\end{verbatim}
XXX some fields need to be added here...
\begin{verbatim}
/* Added in release 2.2 */
/* Iterators */
getiterfunc tp_iter;
iternextfunc tp_iternext;
\end{verbatim}
These functions provide support for the iterator protocol. Any object
which wishes to support iteration over its contents (which may be
generated during iteration) must implement the \code{tp_iter}
handler. Objects which are returned by a \code{tp_iter} handler must
implement both the \code{tp_iter} and \code{tp_iternext} handlers.
Both handlers take exactly one parameter, the instance for which they
are being called, and return a new reference. In the case of an
error, they should set an exception and return \NULL.
For an object which represents an iterable collection, the
\code{tp_iter} handler must return an iterator object. The iterator
object is responsible for maintaining the state of the iteration. For
collections which can support multiple iterators which do not
interfere with each other (as lists and tuples do), a new iterator
should be created and returned. Objects which can only be iterated
over once (usually due to side effects of iteration) should implement
this handler by returning a new reference to themselves, and should
also implement the \code{tp_iternext} handler. File objects are an
example of such an iterator.
Iterator objects should implement both handlers. The \code{tp_iter}
handler should return a new reference to the iterator (this is the
same as the \code{tp_iter} handler for objects which can only be
iterated over destructively). The \code{tp_iternext} handler should
return a new reference to the next object in the iteration if there is
one. If the iteration has reached the end, it may return \NULL{}
without setting an exception or it may set \exception{StopIteration};
avoiding the exception can yield slightly better performance. If an
actual error occurs, it should set an exception and return \NULL.
\subsection{More Suggestions}
Remember that you can omit most of these functions, in which case you
provide \code{0} as a value. There are type definitions for each of
the functions you must provide. They are in \file{object.h} in the
Python include directory that comes with the source distribution of
Python.
In order to learn how to implement any specific method for your new
datatype, do the following: Download and unpack the Python source
distribution. Go the \file{Objects} directory, then search the
C source files for \code{tp_} plus the function you want (for
example, \code{tp_print} or \code{tp_compare}). You will find
examples of the function you want to implement.
When you need to verify that an object is an instance of the type
you are implementing, use the \cfunction{PyObject_TypeCheck} function.
A sample of its use might be something like the following:
\begin{verbatim}
if (! PyObject_TypeCheck(some_object, &MyType)) {
PyErr_SetString(PyExc_TypeError, "arg #1 not a mything");
return NULL;
}
\end{verbatim}