Building Mac Python from source

Note: This document is still for Python 2.0. It is wildly incorrect.

This document explains how to build MacPython from source. This is necessary if you want to make modifications to the Python core. Building Python is not something to be undertaken lightly, you need a reasonable working knowledge of the CodeWarrior development environment, a good net connection and probably quite some time too.

The information density in this file is high, so you should probably print it and read it at your leasure. Most things are explained only once (and probably in the wrong place:-).

First a warning: this information may become outdated if a new CodeWarrior is released after MacPython. The MacPython homepage will hopefully have updated instructions in that case.
I am very interested in feedback on this document, send your comments to the Mac Python Special Interest Group.

What you need.

The following things you definitely need: The MacPython project files are configured to include a plethora of optional modules, and these modules need a number of extra packages. To use the project files as-is you have to download these packages too. Python has all such modules as dynamically loaded modules, so if you don't need a certain package it suffices to just refrain from builing the extension module. Here are the locations for the various things you need:

Setting Up

Now that you have collected everything you should start with building the various parts. If you don't want to fix access paths try to set things up as follows: 
Top-level-folder:
	GUSI2
	imglibs
		jpeg
		netpbm
			libtiff
		zlib
		png
	gdbm
	Python
		Modules
		...
		Mac
			Modules
			Build
			...
	Tcl/Tk Folder
		tcl8.0
		tk8.0
		MoreFiles 1.4.3
	Waste 1.3 distribution (if you want waste)
If your setup of the libraries is exactly the same as mine (which is not very likely, unless you happen to work from the same CVS repository) you can use the project buildlibs.prj in the :Mac:Build folder to build all needed libraries in one fell swoop, otherwise you will have to build the libraries one by one.

First build GUSI. If you didn't get the python-specific GUSI you have to massage some of the Python code (missing routines) and you'll miss the functionality of "delay console".

Next, in libjpeg, pbmplus, zlib, libpng, gdbm, andlibtiff you build all projects. Usually the projects are in "mac" subfolders, sometimes they are in the main folder. Tcl/tk is a special case, see below.

Building Tcl/Tk

The Tcl/Tk 8.3.0 source distribution does not work on the Mac. I have created an archive of the sources that I used to build _tkinter for MacPython, you can obtain this from ftp://ftp.cwi.nl/pub/jack/python/mac/tcltk830src-for-python.sit. Only the libraries needed to build _tkinter for PPC have been fixed.

Note that if you use a different release of Tcl and Tk than the ones I have used you may have to adapt the Python tkresources.rsrc file. This is easiest done by building SimpleTk and copying the TEXT, ICON and CRSR resources from it to tkresources.rsrc. This allows the _tkinter module to work without an installed Tk/Tcl on your machine.

Also note that the _tkinter.ppc.slb that is normally distributed in the PlugIns folder is the one from the Imaging extension, which has some extra features needed by PIL (and which features should not hinder normal operation). Build first the Tcl library, then SimpleTcl (test it by typing ls -l in the window you get) then the Tk library, then SimpleTk (which can again be tested with ls -l). If this all worked you are all set to try building Python.

Building Waste

You do not need to build the Waste libraries, as Python includes the source modules themselves.

The organization of the Python source tree

Time for a short break, while we have a look at the organization of the Python source tree. At the top level, we find the following folders:
Demo
Demo programs that are not Mac-specific. Some of these may not work.
Extensions
Extensions to the interpreter that are not Mac-specific. Contains the img, Imaging and Numerical extensions in this distribution.
Grammar
The Python grammar. Included for reference only, you cannot build the parser on a Mac.
Include
Machine-independent header files.
Modules
Machine-independent optional modules. Not all of these will work on the Mac.
Objects
Machine-independent code for various object types. Most of these are not really optional: the interpreter will not function without them.
Parser
The Python parser (machine-independent).
Python
The core interpreter. Most files are machine-independent, some are unix-specific and not used on the Mac.
Tools
Tools for python developers. Contains modulator which builds skeleton C extension modules, bgen which generates complete interface modules from information in C header files and freeze which is used to turn Python scripts into real applications (used by MacFreeze and BuildApplication) There are some readme files, but more documentation is sorely needed.
All the mac-specific stuff lives in the Mac folder:
Build
This is where the project files live and where you build the libraries, shared libraries, executables and plugin modules. All the resulting binaries, except for intermedeate results, are deposited in the toplevel folder or the Mac:PlugIns folder (for plugin modules).
Compat
Unix-compatability routines. Most of these are not used anymore, since GUSI provides a rather complete emulation, but you may need these if you are trying to build a non-GUSI python.
Demo
Mac-specific demo programs, some of them annotated.
Include
Mac-specific but compiler-independent include files.
Lib
Mac-specific standard modules. The toolbox folder contains modules specifically needed with various MacOS toolbox interface modules.
Modules
Mac-specific builtin modules. Theoretically these are all optional, but some are rather essential (like macmodule). A lot of these modules are generated with bgen, in which case the bgen input files are included so you can attempt to regenerate them or extend them.
MPW
MPW-specific files. These have not been used or kept up-to-date for a long time, so use at your own risk.
mwerks
Mwerks-specific sources and headers. Contains glue code for Pythons shared-library architecture, a replacement for malloc and a directory with various projects for building variations on the Python interpreter. The mwerks_*.h files here are the option-setting files for the various interpreters and such, comparable to the unix command-line -D options to the compiler. Each project uses the correct option file as its "prefix file" in the "C/C++ language" settings. Disabling optional modules (for the 68K interpreter), building non-GUSI interpreters and various other things are accomplished by modifying these files (and possibly changing the list of files included in the project window, of course).
PlugIns
This is where the PPC and CFM68K dynamically-loaded plugin modules live.
Python
Mac-specific parts of the core interpreter.
Resources
Resource files needed to build the interpreter.
Scripts
A collection of various mac-specific Python scripts. Some are essential, some are useful but few are documented, so you will have to use your imagination to work them out.
Tools
A collection of tools, usually bigger than those in the scripts folder. The important ones here are the IDE and macfreeze. The IDE is built with the buildIDE.py script, which puts the resulting applet in the toplevel folder. Macfreeze is usually invoked through the BuildApplication script, but for more control over the freezing process you can run the main script here.
Unsupported
Modules that are not supported any longer but may still work with a little effort.

Building the 68K interpreter

68K Python is no longer supported, and the projects are not included in the source distirbution anymore. If you really want to build Python for the 68K your best bet is to check the sources out of the CVS repository. The latest projects (in :Mac:build:) that support 68K development are tagged as such, and are dated around August 2000. If you plan on doing this announce it on the SIG, please.

Building the PPC interpreter

First you optionally build the external libraries with buildlibs.prj. Next, the projects for interpreter, core library and applet skeleton are all linked together, so building the fat target in PythonEngine.prj will result in everything being built. The resulting applications and fat shared library are deposited in the main Python folder. Finally, you build all the plugins with the plugins.prj project. For completeness sake here is a breakdown of the projects:
PythonCore (with subproject PythonCorePPC)
The shared library that contains the bulk of the interpreter and its resources. It is a good idea to immedeately put an alias to this shared library in the Extensions folder of your system folder. Do exactly that: put an alias there, copying or moving the file will cause you grief later if you rebuild the library and forget to copy it to the extensions folder again. The InstallPython applet will also do this, along with creating the plugin aliases.
Note that the subproject looks a bit silly nowadays (with no more CFM68K support) but you will have to live with that for this release.
PythonInterpeter
The interpreter. This is basically a routine to call out to the shared library. Unlike in previous releases the same program is used for creating applets (for which formerly PythonApplet was used).

Plugin projects
Each plugin module has a separate project. The Plugins.prj project tries to build them all, but is known to be flakey. See fullbuild below for a better way to build everything.
After creating the alias to PythonCore you remove any old Python 2.0b1 Preferences file from the Preferences folder (if you had python installed on your system before) and run the interpreter once to create the correct preferences file.

Next, you have to build the extension modules. The PlugIns.ppc project has all the other projects as subprojects and builds everything (but see the gotcha above).

Finally, you must build the standard applets: EditPythonPrefs, BuildApplet, etc. This is easiest done with the fullbuild script from Mac:scripts.

Actually, the fullbuild script can be used to build everything, but you need a fully-functional interpreter before you can use it (and one that isn't rebuilt in the process: you cannot rebuild a running program). You could copy the interpreter to a different place and use that to run fullbuild. The PythonStandSmall.prj project builds an interpreter that is suited to this, and it can also come in handy if you need to debug things (which is easier in a static program).

You are all set now, and should read the release notes and ReadMe file from the Mac folder.

Rebuilding .exp files for PPC and CFM68K

Occasionally it may be necessary to rebuild your PythonCore .exp file, a file that controls which symbols are exported by your PythonCore shared library. Rebuild it if you get unexpected undefined symbols when you are building a plugin module.

Rebuilding the .exp file is done by first removing the file and removing the reference to it in the project (in the "config" section). Next, build PythonCore. This will create a new .exp file. Edit this file to remove the references to the symbols __initialize, __terminate, setjmp, longjmp, vec_longjmp, main and (for PPC) __ptmf_null or (for CFM68K) __start and dummy_init_routine. Next, add the .exp file to the project again and rebuild PythonCore.

This rather convoluted procedure is needed to ensure that plugin modules don't accidentally link with those entrypoints from PythonCore, which will not work because those routines have to be in the same code fragment as they are used from.

Using the CVS source archive

It is possible (and probably best) to access the Python sources through remote CVS. The advantage of this is that you get the very latest sources, so any bug fixed or new features will be immedeately available. This is also the disadvantage, of course: as this is the same tree as is used for development it may sometimes be a little less stable.

The CVS client of choice is Alexandre Parenteau's MacCVS. It can be obtained through the WinCVS homepage. MacCVS uses Internet Config to set file types correctly based on the filename extension. In the maccvs preferences you should also set (in the "binary files" section) "use mac encoding: applesingle" and (in the "text files" section) "use ISO latin 1 conversion".

It is also a good idea to disable Quicktime Exchange in the Quicktime control panel. Quicktime Exchange will magically map some extensions to filetypes, and this can seriously hinder you if, for instance, .bmp is not a Windows bitmap file.

The machine-independent Python sources are checked out from the main Python CVS archive on sourceforge.net, see the Source access via CVS page for details. When you check the sources out you will get something like Python:dist:src, and under that the Modules, Lib, etc hierarchy. The src folder should be renamed to Python, and is what this document refers to as the "toplevel Python folder".

Next, in a separate folder, you check out the mac-specific sources. You then move the Mac folder from this checkout (the only folder with anything in it) to the Python source folder. Note that the checking out in a separate folder and moving is necessary, due to the way cvs works. The CVS path to use for the mac stuff can be found at the MacPython homepage. Finally, you check out the external libraries needed in the parent of the toplevel Python folder. The CVS path for these libraries is also mentioned at the MacPython homepage.

Neither of the pages mentioned above contains the passwords for the CVS sites, for obvious reasons, but they do contain instructions on how to obtain the passwords.

You should end up with a folder structure as described at the top of this document.

Note that while the Mac folder is now a subfolder of your toplevel Python folder this does not mean that they "act as one" as far as CVS is concerned. To update all your sources you have to do a "cvs update" in the toplevel Python folder and another one in the Mac folder. This is again a cvs problem: it cannot deal with subpackages coming from different repositories.

Odds and ends

Some remarks that I could not fit in elsewhere: