__all__ = ( 'Stream', 'StreamMode', 'open_connection', 'start_server', 'connect', 'connect_read_pipe', 'connect_write_pipe', 'StreamServer') import enum import socket import sys import warnings import weakref if hasattr(socket, 'AF_UNIX'): __all__ += ('open_unix_connection', 'start_unix_server', 'connect_unix', 'UnixStreamServer') from . import coroutines from . import events from . import exceptions from . import format_helpers from . import protocols from .log import logger from . import tasks _DEFAULT_LIMIT = 2 ** 16 # 64 KiB class StreamMode(enum.Flag): READ = enum.auto() WRITE = enum.auto() READWRITE = READ | WRITE def _ensure_can_read(mode): if not mode & StreamMode.READ: raise RuntimeError("The stream is write-only") def _ensure_can_write(mode): if not mode & StreamMode.WRITE: raise RuntimeError("The stream is read-only") class _ContextManagerHelper: __slots__ = ('_awaitable', '_result') def __init__(self, awaitable): self._awaitable = awaitable self._result = None def __await__(self): return self._awaitable.__await__() async def __aenter__(self): ret = await self._awaitable result = await ret.__aenter__() self._result = result return result async def __aexit__(self, exc_type, exc_val, exc_tb): return await self._result.__aexit__(exc_type, exc_val, exc_tb) def connect(host=None, port=None, *, limit=_DEFAULT_LIMIT, ssl=None, family=0, proto=0, flags=0, sock=None, local_addr=None, server_hostname=None, ssl_handshake_timeout=None, happy_eyeballs_delay=None, interleave=None): # Design note: # Don't use decorator approach but exilicit non-async # function to fail fast and explicitly # if passed arguments don't match the function signature return _ContextManagerHelper(_connect(host, port, limit, ssl, family, proto, flags, sock, local_addr, server_hostname, ssl_handshake_timeout, happy_eyeballs_delay, interleave)) async def _connect(host, port, limit, ssl, family, proto, flags, sock, local_addr, server_hostname, ssl_handshake_timeout, happy_eyeballs_delay, interleave): loop = events.get_running_loop() stream = Stream(mode=StreamMode.READWRITE, limit=limit, loop=loop, _asyncio_internal=True) await loop.create_connection( lambda: _StreamProtocol(stream, loop=loop, _asyncio_internal=True), host, port, ssl=ssl, family=family, proto=proto, flags=flags, sock=sock, local_addr=local_addr, server_hostname=server_hostname, ssl_handshake_timeout=ssl_handshake_timeout, happy_eyeballs_delay=happy_eyeballs_delay, interleave=interleave) return stream def connect_read_pipe(pipe, *, limit=_DEFAULT_LIMIT): # Design note: # Don't use decorator approach but explicit non-async # function to fail fast and explicitly # if passed arguments don't match the function signature return _ContextManagerHelper(_connect_read_pipe(pipe, limit)) async def _connect_read_pipe(pipe, limit): loop = events.get_running_loop() stream = Stream(mode=StreamMode.READ, limit=limit, loop=loop, _asyncio_internal=True) await loop.connect_read_pipe( lambda: _StreamProtocol(stream, loop=loop, _asyncio_internal=True), pipe) return stream def connect_write_pipe(pipe, *, limit=_DEFAULT_LIMIT): # Design note: # Don't use decorator approach but explicit non-async # function to fail fast and explicitly # if passed arguments don't match the function signature return _ContextManagerHelper(_connect_write_pipe(pipe, limit)) async def _connect_write_pipe(pipe, limit): loop = events.get_running_loop() stream = Stream(mode=StreamMode.WRITE, limit=limit, loop=loop, _asyncio_internal=True) await loop.connect_write_pipe( lambda: _StreamProtocol(stream, loop=loop, _asyncio_internal=True), pipe) return stream async def open_connection(host=None, port=None, *, loop=None, limit=_DEFAULT_LIMIT, **kwds): """A wrapper for create_connection() returning a (reader, writer) pair. The reader returned is a StreamReader instance; the writer is a StreamWriter instance. The arguments are all the usual arguments to create_connection() except protocol_factory; most common are positional host and port, with various optional keyword arguments following. Additional optional keyword arguments are loop (to set the event loop instance to use) and limit (to set the buffer limit passed to the StreamReader). (If you want to customize the StreamReader and/or StreamReaderProtocol classes, just copy the code -- there's really nothing special here except some convenience.) """ warnings.warn("open_connection() is deprecated since Python 3.8 " "in favor of connect(), and scheduled for removal " "in Python 3.10", DeprecationWarning, stacklevel=2) if loop is None: loop = events.get_event_loop() else: warnings.warn("The loop argument is deprecated since Python 3.8, " "and scheduled for removal in Python 3.10.", DeprecationWarning, stacklevel=2) reader = StreamReader(limit=limit, loop=loop) protocol = StreamReaderProtocol(reader, loop=loop, _asyncio_internal=True) transport, _ = await loop.create_connection( lambda: protocol, host, port, **kwds) writer = StreamWriter(transport, protocol, reader, loop) return reader, writer async def start_server(client_connected_cb, host=None, port=None, *, loop=None, limit=_DEFAULT_LIMIT, **kwds): """Start a socket server, call back for each client connected. The first parameter, `client_connected_cb`, takes two parameters: client_reader, client_writer. client_reader is a StreamReader object, while client_writer is a StreamWriter object. This parameter can either be a plain callback function or a coroutine; if it is a coroutine, it will be automatically converted into a Task. The rest of the arguments are all the usual arguments to loop.create_server() except protocol_factory; most common are positional host and port, with various optional keyword arguments following. The return value is the same as loop.create_server(). Additional optional keyword arguments are loop (to set the event loop instance to use) and limit (to set the buffer limit passed to the StreamReader). The return value is the same as loop.create_server(), i.e. a Server object which can be used to stop the service. """ warnings.warn("start_server() is deprecated since Python 3.8 " "in favor of StreamServer(), and scheduled for removal " "in Python 3.10", DeprecationWarning, stacklevel=2) if loop is None: loop = events.get_event_loop() else: warnings.warn("The loop argument is deprecated since Python 3.8, " "and scheduled for removal in Python 3.10.", DeprecationWarning, stacklevel=2) def factory(): reader = StreamReader(limit=limit, loop=loop) protocol = StreamReaderProtocol(reader, client_connected_cb, loop=loop, _asyncio_internal=True) return protocol return await loop.create_server(factory, host, port, **kwds) class _BaseStreamServer: # Design notes. # StreamServer and UnixStreamServer are exposed as FINAL classes, # not function factories. # async with serve(host, port) as server: # server.start_serving() # looks ugly. # The class doesn't provide API for enumerating connected streams # It can be a subject for improvements in Python 3.9 _server_impl = None def __init__(self, client_connected_cb, /, limit=_DEFAULT_LIMIT, shutdown_timeout=60, _asyncio_internal=False): if not _asyncio_internal: raise RuntimeError("_ServerStream is a private asyncio class") self._client_connected_cb = client_connected_cb self._limit = limit self._loop = events.get_running_loop() self._streams = {} self._shutdown_timeout = shutdown_timeout def __init_subclass__(cls): if not cls.__module__.startswith('asyncio.'): raise TypeError(f"asyncio.{cls.__name__} " "class cannot be inherited from") async def bind(self): if self._server_impl is not None: return self._server_impl = await self._bind() def is_bound(self): return self._server_impl is not None @property def sockets(self): # multiple value for socket bound to both IPv4 and IPv6 families if self._server_impl is None: return () return self._server_impl.sockets def is_serving(self): if self._server_impl is None: return False return self._server_impl.is_serving() async def start_serving(self): await self.bind() await self._server_impl.start_serving() async def serve_forever(self): await self.start_serving() await self._server_impl.serve_forever() async def close(self): if self._server_impl is None: return self._server_impl.close() streams = list(self._streams.keys()) active_tasks = list(self._streams.values()) if streams: await tasks.wait([stream.close() for stream in streams]) await self._server_impl.wait_closed() self._server_impl = None await self._shutdown_active_tasks(active_tasks) async def abort(self): if self._server_impl is None: return self._server_impl.close() streams = list(self._streams.keys()) active_tasks = list(self._streams.values()) if streams: await tasks.wait([stream.abort() for stream in streams]) await self._server_impl.wait_closed() self._server_impl = None await self._shutdown_active_tasks(active_tasks) async def __aenter__(self): await self.bind() return self async def __aexit__(self, exc_type, exc_value, exc_tb): await self.close() def _attach(self, stream, task): self._streams[stream] = task def _detach(self, stream, task): del self._streams[stream] async def _shutdown_active_tasks(self, active_tasks): if not active_tasks: return # NOTE: tasks finished with exception are reported # by the Task.__del__() method. done, pending = await tasks.wait(active_tasks, timeout=self._shutdown_timeout) if not pending: return for task in pending: task.cancel() done, pending = await tasks.wait(pending, timeout=self._shutdown_timeout) for task in pending: self._loop.call_exception_handler({ "message": (f'{task!r} ignored cancellation request ' f'from a closing {self!r}'), "stream_server": self }) def __repr__(self): ret = [f'{self.__class__.__name__}'] if self.is_serving(): ret.append('serving') if self.sockets: ret.append(f'sockets={self.sockets!r}') return '<' + ' '.join(ret) + '>' def __del__(self, _warn=warnings.warn): if self._server_impl is not None: _warn(f"unclosed stream server {self!r}", ResourceWarning, source=self) self._server_impl.close() class StreamServer(_BaseStreamServer): def __init__(self, client_connected_cb, /, host=None, port=None, *, limit=_DEFAULT_LIMIT, family=socket.AF_UNSPEC, flags=socket.AI_PASSIVE, sock=None, backlog=100, ssl=None, reuse_address=None, reuse_port=None, ssl_handshake_timeout=None, shutdown_timeout=60): super().__init__(client_connected_cb, limit=limit, shutdown_timeout=shutdown_timeout, _asyncio_internal=True) self._host = host self._port = port self._family = family self._flags = flags self._sock = sock self._backlog = backlog self._ssl = ssl self._reuse_address = reuse_address self._reuse_port = reuse_port self._ssl_handshake_timeout = ssl_handshake_timeout async def _bind(self): def factory(): protocol = _ServerStreamProtocol(self, self._limit, self._client_connected_cb, loop=self._loop, _asyncio_internal=True) return protocol return await self._loop.create_server( factory, self._host, self._port, start_serving=False, family=self._family, flags=self._flags, sock=self._sock, backlog=self._backlog, ssl=self._ssl, reuse_address=self._reuse_address, reuse_port=self._reuse_port, ssl_handshake_timeout=self._ssl_handshake_timeout) if hasattr(socket, 'AF_UNIX'): # UNIX Domain Sockets are supported on this platform async def open_unix_connection(path=None, *, loop=None, limit=_DEFAULT_LIMIT, **kwds): """Similar to `open_connection` but works with UNIX Domain Sockets.""" warnings.warn("open_unix_connection() is deprecated since Python 3.8 " "in favor of connect_unix(), and scheduled for removal " "in Python 3.10", DeprecationWarning, stacklevel=2) if loop is None: loop = events.get_event_loop() else: warnings.warn("The loop argument is deprecated since Python 3.8, " "and scheduled for removal in Python 3.10.", DeprecationWarning, stacklevel=2) reader = StreamReader(limit=limit, loop=loop) protocol = StreamReaderProtocol(reader, loop=loop, _asyncio_internal=True) transport, _ = await loop.create_unix_connection( lambda: protocol, path, **kwds) writer = StreamWriter(transport, protocol, reader, loop) return reader, writer def connect_unix(path=None, *, limit=_DEFAULT_LIMIT, ssl=None, sock=None, server_hostname=None, ssl_handshake_timeout=None): """Similar to `connect()` but works with UNIX Domain Sockets.""" # Design note: # Don't use decorator approach but exilicit non-async # function to fail fast and explicitly # if passed arguments don't match the function signature return _ContextManagerHelper(_connect_unix(path, limit, ssl, sock, server_hostname, ssl_handshake_timeout)) async def _connect_unix(path, limit, ssl, sock, server_hostname, ssl_handshake_timeout): """Similar to `connect()` but works with UNIX Domain Sockets.""" loop = events.get_running_loop() stream = Stream(mode=StreamMode.READWRITE, limit=limit, loop=loop, _asyncio_internal=True) await loop.create_unix_connection( lambda: _StreamProtocol(stream, loop=loop, _asyncio_internal=True), path, ssl=ssl, sock=sock, server_hostname=server_hostname, ssl_handshake_timeout=ssl_handshake_timeout) return stream async def start_unix_server(client_connected_cb, path=None, *, loop=None, limit=_DEFAULT_LIMIT, **kwds): """Similar to `start_server` but works with UNIX Domain Sockets.""" warnings.warn("start_unix_server() is deprecated since Python 3.8 " "in favor of UnixStreamServer(), and scheduled " "for removal in Python 3.10", DeprecationWarning, stacklevel=2) if loop is None: loop = events.get_event_loop() else: warnings.warn("The loop argument is deprecated since Python 3.8, " "and scheduled for removal in Python 3.10.", DeprecationWarning, stacklevel=2) def factory(): reader = StreamReader(limit=limit, loop=loop) protocol = StreamReaderProtocol(reader, client_connected_cb, loop=loop, _asyncio_internal=True) return protocol return await loop.create_unix_server(factory, path, **kwds) class UnixStreamServer(_BaseStreamServer): def __init__(self, client_connected_cb, /, path=None, *, limit=_DEFAULT_LIMIT, sock=None, backlog=100, ssl=None, ssl_handshake_timeout=None, shutdown_timeout=60): super().__init__(client_connected_cb, limit=limit, shutdown_timeout=shutdown_timeout, _asyncio_internal=True) self._path = path self._sock = sock self._backlog = backlog self._ssl = ssl self._ssl_handshake_timeout = ssl_handshake_timeout async def _bind(self): def factory(): protocol = _ServerStreamProtocol(self, self._limit, self._client_connected_cb, loop=self._loop, _asyncio_internal=True) return protocol return await self._loop.create_unix_server( factory, self._path, start_serving=False, sock=self._sock, backlog=self._backlog, ssl=self._ssl, ssl_handshake_timeout=self._ssl_handshake_timeout) class FlowControlMixin(protocols.Protocol): """Reusable flow control logic for StreamWriter.drain(). This implements the protocol methods pause_writing(), resume_writing() and connection_lost(). If the subclass overrides these it must call the super methods. StreamWriter.drain() must wait for _drain_helper() coroutine. """ def __init__(self, loop=None, *, _asyncio_internal=False): if loop is None: self._loop = events.get_event_loop() else: self._loop = loop if not _asyncio_internal: # NOTE: # Avoid inheritance from FlowControlMixin # Copy-paste the code to your project # if you need flow control helpers warnings.warn(f"{self.__class__} should be instaniated " "by asyncio internals only, " "please avoid its creation from user code", DeprecationWarning) self._paused = False self._drain_waiter = None self._connection_lost = False def pause_writing(self): assert not self._paused self._paused = True if self._loop.get_debug(): logger.debug("%r pauses writing", self) def resume_writing(self): assert self._paused self._paused = False if self._loop.get_debug(): logger.debug("%r resumes writing", self) waiter = self._drain_waiter if waiter is not None: self._drain_waiter = None if not waiter.done(): waiter.set_result(None) def connection_lost(self, exc): self._connection_lost = True # Wake up the writer if currently paused. if not self._paused: return waiter = self._drain_waiter if waiter is None: return self._drain_waiter = None if waiter.done(): return if exc is None: waiter.set_result(None) else: waiter.set_exception(exc) async def _drain_helper(self): if self._connection_lost: raise ConnectionResetError('Connection lost') if not self._paused: return waiter = self._drain_waiter assert waiter is None or waiter.cancelled() waiter = self._loop.create_future() self._drain_waiter = waiter await waiter def _get_close_waiter(self, stream): raise NotImplementedError # begin legacy stream APIs class StreamReaderProtocol(FlowControlMixin, protocols.Protocol): """Helper class to adapt between Protocol and StreamReader. (This is a helper class instead of making StreamReader itself a Protocol subclass, because the StreamReader has other potential uses, and to prevent the user of the StreamReader to accidentally call inappropriate methods of the protocol.) """ def __init__(self, stream_reader, client_connected_cb=None, loop=None, *, _asyncio_internal=False): super().__init__(loop=loop, _asyncio_internal=_asyncio_internal) self._stream_reader = stream_reader self._stream_writer = None self._client_connected_cb = client_connected_cb self._over_ssl = False self._closed = self._loop.create_future() def connection_made(self, transport): self._stream_reader.set_transport(transport) self._over_ssl = transport.get_extra_info('sslcontext') is not None if self._client_connected_cb is not None: self._stream_writer = StreamWriter(transport, self, self._stream_reader, self._loop) res = self._client_connected_cb(self._stream_reader, self._stream_writer) if coroutines.iscoroutine(res): self._loop.create_task(res) def connection_lost(self, exc): if self._stream_reader is not None: if exc is None: self._stream_reader.feed_eof() else: self._stream_reader.set_exception(exc) if not self._closed.done(): if exc is None: self._closed.set_result(None) else: self._closed.set_exception(exc) super().connection_lost(exc) self._stream_reader = None self._stream_writer = None def data_received(self, data): self._stream_reader.feed_data(data) def eof_received(self): self._stream_reader.feed_eof() if self._over_ssl: # Prevent a warning in SSLProtocol.eof_received: # "returning true from eof_received() # has no effect when using ssl" return False return True def __del__(self): # Prevent reports about unhandled exceptions. # Better than self._closed._log_traceback = False hack closed = self._closed if closed.done() and not closed.cancelled(): closed.exception() class StreamWriter: """Wraps a Transport. This exposes write(), writelines(), [can_]write_eof(), get_extra_info() and close(). It adds drain() which returns an optional Future on which you can wait for flow control. It also adds a transport property which references the Transport directly. """ def __init__(self, transport, protocol, reader, loop): self._transport = transport self._protocol = protocol # drain() expects that the reader has an exception() method assert reader is None or isinstance(reader, StreamReader) self._reader = reader self._loop = loop def __repr__(self): info = [self.__class__.__name__, f'transport={self._transport!r}'] if self._reader is not None: info.append(f'reader={self._reader!r}') return '<{}>'.format(' '.join(info)) @property def transport(self): return self._transport def write(self, data): self._transport.write(data) def writelines(self, data): self._transport.writelines(data) def write_eof(self): return self._transport.write_eof() def can_write_eof(self): return self._transport.can_write_eof() def close(self): return self._transport.close() def is_closing(self): return self._transport.is_closing() async def wait_closed(self): await self._protocol._closed def get_extra_info(self, name, default=None): return self._transport.get_extra_info(name, default) async def drain(self): """Flush the write buffer. The intended use is to write w.write(data) await w.drain() """ if self._reader is not None: exc = self._reader.exception() if exc is not None: raise exc if self._transport.is_closing(): # Yield to the event loop so connection_lost() may be # called. Without this, _drain_helper() would return # immediately, and code that calls # write(...); await drain() # in a loop would never call connection_lost(), so it # would not see an error when the socket is closed. await tasks.sleep(0, loop=self._loop) await self._protocol._drain_helper() class StreamReader: def __init__(self, limit=_DEFAULT_LIMIT, loop=None): # The line length limit is a security feature; # it also doubles as half the buffer limit. if limit <= 0: raise ValueError('Limit cannot be <= 0') self._limit = limit if loop is None: self._loop = events.get_event_loop() else: self._loop = loop self._buffer = bytearray() self._eof = False # Whether we're done. self._waiter = None # A future used by _wait_for_data() self._exception = None self._transport = None self._paused = False def __repr__(self): info = ['StreamReader'] if self._buffer: info.append(f'{len(self._buffer)} bytes') if self._eof: info.append('eof') if self._limit != _DEFAULT_LIMIT: info.append(f'limit={self._limit}') if self._waiter: info.append(f'waiter={self._waiter!r}') if self._exception: info.append(f'exception={self._exception!r}') if self._transport: info.append(f'transport={self._transport!r}') if self._paused: info.append('paused') return '<{}>'.format(' '.join(info)) def exception(self): return self._exception def set_exception(self, exc): self._exception = exc waiter = self._waiter if waiter is not None: self._waiter = None if not waiter.cancelled(): waiter.set_exception(exc) def _wakeup_waiter(self): """Wakeup read*() functions waiting for data or EOF.""" waiter = self._waiter if waiter is not None: self._waiter = None if not waiter.cancelled(): waiter.set_result(None) def set_transport(self, transport): assert self._transport is None, 'Transport already set' self._transport = transport def _maybe_resume_transport(self): if self._paused and len(self._buffer) <= self._limit: self._paused = False self._transport.resume_reading() def feed_eof(self): self._eof = True self._wakeup_waiter() def at_eof(self): """Return True if the buffer is empty and 'feed_eof' was called.""" return self._eof and not self._buffer def feed_data(self, data): assert not self._eof, 'feed_data after feed_eof' if not data: return self._buffer.extend(data) self._wakeup_waiter() if (self._transport is not None and not self._paused and len(self._buffer) > 2 * self._limit): try: self._transport.pause_reading() except NotImplementedError: # The transport can't be paused. # We'll just have to buffer all data. # Forget the transport so we don't keep trying. self._transport = None else: self._paused = True async def _wait_for_data(self, func_name): """Wait until feed_data() or feed_eof() is called. If stream was paused, automatically resume it. """ # StreamReader uses a future to link the protocol feed_data() method # to a read coroutine. Running two read coroutines at the same time # would have an unexpected behaviour. It would not possible to know # which coroutine would get the next data. if self._waiter is not None: raise RuntimeError( f'{func_name}() called while another coroutine is ' f'already waiting for incoming data') assert not self._eof, '_wait_for_data after EOF' # Waiting for data while paused will make deadlock, so prevent it. # This is essential for readexactly(n) for case when n > self._limit. if self._paused: self._paused = False self._transport.resume_reading() self._waiter = self._loop.create_future() try: await self._waiter finally: self._waiter = None async def readline(self): """Read chunk of data from the stream until newline (b'\n') is found. On success, return chunk that ends with newline. If only partial line can be read due to EOF, return incomplete line without terminating newline. When EOF was reached while no bytes read, empty bytes object is returned. If limit is reached, ValueError will be raised. In that case, if newline was found, complete line including newline will be removed from internal buffer. Else, internal buffer will be cleared. Limit is compared against part of the line without newline. If stream was paused, this function will automatically resume it if needed. """ sep = b'\n' seplen = len(sep) try: line = await self.readuntil(sep) except exceptions.IncompleteReadError as e: return e.partial except exceptions.LimitOverrunError as e: if self._buffer.startswith(sep, e.consumed): del self._buffer[:e.consumed + seplen] else: self._buffer.clear() self._maybe_resume_transport() raise ValueError(e.args[0]) return line async def readuntil(self, separator=b'\n'): """Read data from the stream until ``separator`` is found. On success, the data and separator will be removed from the internal buffer (consumed). Returned data will include the separator at the end. Configured stream limit is used to check result. Limit sets the maximal length of data that can be returned, not counting the separator. If an EOF occurs and the complete separator is still not found, an IncompleteReadError exception will be raised, and the internal buffer will be reset. The IncompleteReadError.partial attribute may contain the separator partially. If the data cannot be read because of over limit, a LimitOverrunError exception will be raised, and the data will be left in the internal buffer, so it can be read again. """ seplen = len(separator) if seplen == 0: raise ValueError('Separator should be at least one-byte string') if self._exception is not None: raise self._exception # Consume whole buffer except last bytes, which length is # one less than seplen. Let's check corner cases with # separator='SEPARATOR': # * we have received almost complete separator (without last # byte). i.e buffer='some textSEPARATO'. In this case we # can safely consume len(separator) - 1 bytes. # * last byte of buffer is first byte of separator, i.e. # buffer='abcdefghijklmnopqrS'. We may safely consume # everything except that last byte, but this require to # analyze bytes of buffer that match partial separator. # This is slow and/or require FSM. For this case our # implementation is not optimal, since require rescanning # of data that is known to not belong to separator. In # real world, separator will not be so long to notice # performance problems. Even when reading MIME-encoded # messages :) # `offset` is the number of bytes from the beginning of the buffer # where there is no occurrence of `separator`. offset = 0 # Loop until we find `separator` in the buffer, exceed the buffer size, # or an EOF has happened. while True: buflen = len(self._buffer) # Check if we now have enough data in the buffer for `separator` to # fit. if buflen - offset >= seplen: isep = self._buffer.find(separator, offset) if isep != -1: # `separator` is in the buffer. `isep` will be used later # to retrieve the data. break # see upper comment for explanation. offset = buflen + 1 - seplen if offset > self._limit: raise exceptions.LimitOverrunError( 'Separator is not found, and chunk exceed the limit', offset) # Complete message (with full separator) may be present in buffer # even when EOF flag is set. This may happen when the last chunk # adds data which makes separator be found. That's why we check for # EOF *ater* inspecting the buffer. if self._eof: chunk = bytes(self._buffer) self._buffer.clear() raise exceptions.IncompleteReadError(chunk, None) # _wait_for_data() will resume reading if stream was paused. await self._wait_for_data('readuntil') if isep > self._limit: raise exceptions.LimitOverrunError( 'Separator is found, but chunk is longer than limit', isep) chunk = self._buffer[:isep + seplen] del self._buffer[:isep + seplen] self._maybe_resume_transport() return bytes(chunk) async def read(self, n=-1): """Read up to `n` bytes from the stream. If n is not provided, or set to -1, read until EOF and return all read bytes. If the EOF was received and the internal buffer is empty, return an empty bytes object. If n is zero, return empty bytes object immediately. If n is positive, this function try to read `n` bytes, and may return less or equal bytes than requested, but at least one byte. If EOF was received before any byte is read, this function returns empty byte object. Returned value is not limited with limit, configured at stream creation. If stream was paused, this function will automatically resume it if needed. """ if self._exception is not None: raise self._exception if n == 0: return b'' if n < 0: # This used to just loop creating a new waiter hoping to # collect everything in self._buffer, but that would # deadlock if the subprocess sends more than self.limit # bytes. So just call self.read(self._limit) until EOF. blocks = [] while True: block = await self.read(self._limit) if not block: break blocks.append(block) return b''.join(blocks) if not self._buffer and not self._eof: await self._wait_for_data('read') # This will work right even if buffer is less than n bytes data = bytes(self._buffer[:n]) del self._buffer[:n] self._maybe_resume_transport() return data async def readexactly(self, n): """Read exactly `n` bytes. Raise an IncompleteReadError if EOF is reached before `n` bytes can be read. The IncompleteReadError.partial attribute of the exception will contain the partial read bytes. if n is zero, return empty bytes object. Returned value is not limited with limit, configured at stream creation. If stream was paused, this function will automatically resume it if needed. """ if n < 0: raise ValueError('readexactly size can not be less than zero') if self._exception is not None: raise self._exception if n == 0: return b'' while len(self._buffer) < n: if self._eof: incomplete = bytes(self._buffer) self._buffer.clear() raise exceptions.IncompleteReadError(incomplete, n) await self._wait_for_data('readexactly') if len(self._buffer) == n: data = bytes(self._buffer) self._buffer.clear() else: data = bytes(self._buffer[:n]) del self._buffer[:n] self._maybe_resume_transport() return data def __aiter__(self): return self async def __anext__(self): val = await self.readline() if val == b'': raise StopAsyncIteration return val # end legacy stream APIs class _BaseStreamProtocol(FlowControlMixin, protocols.Protocol): """Helper class to adapt between Protocol and StreamReader. (This is a helper class instead of making StreamReader itself a Protocol subclass, because the StreamReader has other potential uses, and to prevent the user of the StreamReader to accidentally call inappropriate methods of the protocol.) """ _stream = None # initialized in derived classes def __init__(self, loop=None, *, _asyncio_internal=False): super().__init__(loop=loop, _asyncio_internal=_asyncio_internal) self._transport = None self._over_ssl = False self._closed = self._loop.create_future() def connection_made(self, transport): self._transport = transport self._over_ssl = transport.get_extra_info('sslcontext') is not None def connection_lost(self, exc): stream = self._stream if stream is not None: if exc is None: stream.feed_eof() else: stream.set_exception(exc) if not self._closed.done(): if exc is None: self._closed.set_result(None) else: self._closed.set_exception(exc) super().connection_lost(exc) self._transport = None def data_received(self, data): stream = self._stream if stream is not None: stream.feed_data(data) def eof_received(self): stream = self._stream if stream is not None: stream.feed_eof() if self._over_ssl: # Prevent a warning in SSLProtocol.eof_received: # "returning true from eof_received() # has no effect when using ssl" return False return True def _get_close_waiter(self, stream): return self._closed def __del__(self): # Prevent reports about unhandled exceptions. # Better than self._closed._log_traceback = False hack closed = self._get_close_waiter(self._stream) if closed.done() and not closed.cancelled(): closed.exception() class _StreamProtocol(_BaseStreamProtocol): _source_traceback = None def __init__(self, stream, loop=None, *, _asyncio_internal=False): super().__init__(loop=loop, _asyncio_internal=_asyncio_internal) self._source_traceback = stream._source_traceback self._stream_wr = weakref.ref(stream, self._on_gc) self._reject_connection = False def _on_gc(self, wr): transport = self._transport if transport is not None: # connection_made was called context = { 'message': ('An open stream object is being garbage ' 'collected; call "stream.close()" explicitly.') } if self._source_traceback: context['source_traceback'] = self._source_traceback self._loop.call_exception_handler(context) transport.abort() else: self._reject_connection = True self._stream_wr = None @property def _stream(self): if self._stream_wr is None: return None return self._stream_wr() def connection_made(self, transport): if self._reject_connection: context = { 'message': ('An open stream was garbage collected prior to ' 'establishing network connection; ' 'call "stream.close()" explicitly.') } if self._source_traceback: context['source_traceback'] = self._source_traceback self._loop.call_exception_handler(context) transport.abort() return super().connection_made(transport) stream = self._stream if stream is None: return stream.set_transport(transport) stream._protocol = self def connection_lost(self, exc): super().connection_lost(exc) self._stream_wr = None class _ServerStreamProtocol(_BaseStreamProtocol): def __init__(self, server, limit, client_connected_cb, loop=None, *, _asyncio_internal=False): super().__init__(loop=loop, _asyncio_internal=_asyncio_internal) assert self._closed self._client_connected_cb = client_connected_cb self._limit = limit self._server = server self._task = None def connection_made(self, transport): super().connection_made(transport) stream = Stream(mode=StreamMode.READWRITE, transport=transport, protocol=self, limit=self._limit, loop=self._loop, is_server_side=True, _asyncio_internal=True) self._stream = stream # If self._client_connected_cb(self._stream) fails # the exception is logged by transport self._task = self._loop.create_task( self._client_connected_cb(self._stream)) self._server._attach(stream, self._task) def connection_lost(self, exc): super().connection_lost(exc) self._server._detach(self._stream, self._task) self._stream = None class _OptionalAwait: # The class doesn't create a coroutine # if not awaited # It prevents "coroutine is never awaited" message __slots___ = ('_method',) def __init__(self, method): self._method = method def __await__(self): return self._method().__await__() class Stream: """Wraps a Transport. This exposes write(), writelines(), [can_]write_eof(), get_extra_info() and close(). It adds drain() which returns an optional Future on which you can wait for flow control. It also adds a transport property which references the Transport directly. """ _source_traceback = None def __init__(self, mode, *, transport=None, protocol=None, loop=None, limit=_DEFAULT_LIMIT, is_server_side=False, _asyncio_internal=False): if not _asyncio_internal: warnings.warn(f"{self.__class__} should be instaniated " "by asyncio internals only, " "please avoid its creation from user code", DeprecationWarning) self._mode = mode self._transport = transport self._protocol = protocol self._is_server_side = is_server_side # The line length limit is a security feature; # it also doubles as half the buffer limit. if limit <= 0: raise ValueError('Limit cannot be <= 0') self._limit = limit if loop is None: self._loop = events.get_event_loop() else: self._loop = loop self._buffer = bytearray() self._eof = False # Whether we're done. self._waiter = None # A future used by _wait_for_data() self._exception = None self._paused = False self._complete_fut = self._loop.create_future() self._complete_fut.set_result(None) if self._loop.get_debug(): self._source_traceback = format_helpers.extract_stack( sys._getframe(1)) def __repr__(self): info = [self.__class__.__name__] info.append(f'mode={self._mode}') if self._buffer: info.append(f'{len(self._buffer)} bytes') if self._eof: info.append('eof') if self._limit != _DEFAULT_LIMIT: info.append(f'limit={self._limit}') if self._waiter: info.append(f'waiter={self._waiter!r}') if self._exception: info.append(f'exception={self._exception!r}') if self._transport: info.append(f'transport={self._transport!r}') if self._paused: info.append('paused') return '<{}>'.format(' '.join(info)) @property def mode(self): return self._mode def is_server_side(self): return self._is_server_side @property def transport(self): return self._transport def write(self, data): _ensure_can_write(self._mode) self._transport.write(data) return self._fast_drain() def writelines(self, data): _ensure_can_write(self._mode) self._transport.writelines(data) return self._fast_drain() def _fast_drain(self): # The helper tries to use fast-path to return already existing # complete future object if underlying transport is not paused #and actual waiting for writing resume is not needed exc = self.exception() if exc is not None: fut = self._loop.create_future() fut.set_exception(exc) return fut if not self._transport.is_closing(): if self._protocol._connection_lost: fut = self._loop.create_future() fut.set_exception(ConnectionResetError('Connection lost')) return fut if not self._protocol._paused: # fast path, the stream is not paused # no need to wait for resume signal return self._complete_fut return _OptionalAwait(self.drain) def write_eof(self): _ensure_can_write(self._mode) return self._transport.write_eof() def can_write_eof(self): if not self._mode.is_write(): return False return self._transport.can_write_eof() def close(self): self._transport.close() return _OptionalAwait(self.wait_closed) def is_closing(self): return self._transport.is_closing() async def abort(self): self._transport.abort() await self.wait_closed() async def wait_closed(self): await self._protocol._get_close_waiter(self) def get_extra_info(self, name, default=None): return self._transport.get_extra_info(name, default) async def drain(self): """Flush the write buffer. The intended use is to write w.write(data) await w.drain() """ _ensure_can_write(self._mode) exc = self.exception() if exc is not None: raise exc if self._transport.is_closing(): # Wait for protocol.connection_lost() call # Raise connection closing error if any, # ConnectionResetError otherwise await tasks.sleep(0) await self._protocol._drain_helper() async def sendfile(self, file, offset=0, count=None, *, fallback=True): await self.drain() # check for stream mode and exceptions return await self._loop.sendfile(self._transport, file, offset, count, fallback=fallback) async def start_tls(self, sslcontext, *, server_hostname=None, ssl_handshake_timeout=None): await self.drain() # check for stream mode and exceptions transport = await self._loop.start_tls( self._transport, self._protocol, sslcontext, server_side=self._is_server_side, server_hostname=server_hostname, ssl_handshake_timeout=ssl_handshake_timeout) self._transport = transport self._protocol._transport = transport self._protocol._over_ssl = True def exception(self): return self._exception def set_exception(self, exc): self._exception = exc waiter = self._waiter if waiter is not None: self._waiter = None if not waiter.cancelled(): waiter.set_exception(exc) def _wakeup_waiter(self): """Wakeup read*() functions waiting for data or EOF.""" waiter = self._waiter if waiter is not None: self._waiter = None if not waiter.cancelled(): waiter.set_result(None) def set_transport(self, transport): if transport is self._transport: return assert self._transport is None, 'Transport already set' self._transport = transport def _maybe_resume_transport(self): if self._paused and len(self._buffer) <= self._limit: self._paused = False self._transport.resume_reading() def feed_eof(self): self._eof = True self._wakeup_waiter() def at_eof(self): """Return True if the buffer is empty and 'feed_eof' was called.""" return self._eof and not self._buffer def feed_data(self, data): _ensure_can_read(self._mode) assert not self._eof, 'feed_data after feed_eof' if not data: return self._buffer.extend(data) self._wakeup_waiter() if (self._transport is not None and not self._paused and len(self._buffer) > 2 * self._limit): try: self._transport.pause_reading() except NotImplementedError: # The transport can't be paused. # We'll just have to buffer all data. # Forget the transport so we don't keep trying. self._transport = None else: self._paused = True async def _wait_for_data(self, func_name): """Wait until feed_data() or feed_eof() is called. If stream was paused, automatically resume it. """ # StreamReader uses a future to link the protocol feed_data() method # to a read coroutine. Running two read coroutines at the same time # would have an unexpected behaviour. It would not possible to know # which coroutine would get the next data. if self._waiter is not None: raise RuntimeError( f'{func_name}() called while another coroutine is ' f'already waiting for incoming data') assert not self._eof, '_wait_for_data after EOF' # Waiting for data while paused will make deadlock, so prevent it. # This is essential for readexactly(n) for case when n > self._limit. if self._paused: self._paused = False self._transport.resume_reading() self._waiter = self._loop.create_future() try: await self._waiter finally: self._waiter = None async def readline(self): """Read chunk of data from the stream until newline (b'\n') is found. On success, return chunk that ends with newline. If only partial line can be read due to EOF, return incomplete line without terminating newline. When EOF was reached while no bytes read, empty bytes object is returned. If limit is reached, ValueError will be raised. In that case, if newline was found, complete line including newline will be removed from internal buffer. Else, internal buffer will be cleared. Limit is compared against part of the line without newline. If stream was paused, this function will automatically resume it if needed. """ _ensure_can_read(self._mode) sep = b'\n' seplen = len(sep) try: line = await self.readuntil(sep) except exceptions.IncompleteReadError as e: return e.partial except exceptions.LimitOverrunError as e: if self._buffer.startswith(sep, e.consumed): del self._buffer[:e.consumed + seplen] else: self._buffer.clear() self._maybe_resume_transport() raise ValueError(e.args[0]) return line async def readuntil(self, separator=b'\n'): """Read data from the stream until ``separator`` is found. On success, the data and separator will be removed from the internal buffer (consumed). Returned data will include the separator at the end. Configured stream limit is used to check result. Limit sets the maximal length of data that can be returned, not counting the separator. If an EOF occurs and the complete separator is still not found, an IncompleteReadError exception will be raised, and the internal buffer will be reset. The IncompleteReadError.partial attribute may contain the separator partially. If the data cannot be read because of over limit, a LimitOverrunError exception will be raised, and the data will be left in the internal buffer, so it can be read again. """ _ensure_can_read(self._mode) seplen = len(separator) if seplen == 0: raise ValueError('Separator should be at least one-byte string') if self._exception is not None: raise self._exception # Consume whole buffer except last bytes, which length is # one less than seplen. Let's check corner cases with # separator='SEPARATOR': # * we have received almost complete separator (without last # byte). i.e buffer='some textSEPARATO'. In this case we # can safely consume len(separator) - 1 bytes. # * last byte of buffer is first byte of separator, i.e. # buffer='abcdefghijklmnopqrS'. We may safely consume # everything except that last byte, but this require to # analyze bytes of buffer that match partial separator. # This is slow and/or require FSM. For this case our # implementation is not optimal, since require rescanning # of data that is known to not belong to separator. In # real world, separator will not be so long to notice # performance problems. Even when reading MIME-encoded # messages :) # `offset` is the number of bytes from the beginning of the buffer # where there is no occurrence of `separator`. offset = 0 # Loop until we find `separator` in the buffer, exceed the buffer size, # or an EOF has happened. while True: buflen = len(self._buffer) # Check if we now have enough data in the buffer for `separator` to # fit. if buflen - offset >= seplen: isep = self._buffer.find(separator, offset) if isep != -1: # `separator` is in the buffer. `isep` will be used later # to retrieve the data. break # see upper comment for explanation. offset = buflen + 1 - seplen if offset > self._limit: raise exceptions.LimitOverrunError( 'Separator is not found, and chunk exceed the limit', offset) # Complete message (with full separator) may be present in buffer # even when EOF flag is set. This may happen when the last chunk # adds data which makes separator be found. That's why we check for # EOF *ater* inspecting the buffer. if self._eof: chunk = bytes(self._buffer) self._buffer.clear() raise exceptions.IncompleteReadError(chunk, None) # _wait_for_data() will resume reading if stream was paused. await self._wait_for_data('readuntil') if isep > self._limit: raise exceptions.LimitOverrunError( 'Separator is found, but chunk is longer than limit', isep) chunk = self._buffer[:isep + seplen] del self._buffer[:isep + seplen] self._maybe_resume_transport() return bytes(chunk) async def read(self, n=-1): """Read up to `n` bytes from the stream. If n is not provided, or set to -1, read until EOF and return all read bytes. If the EOF was received and the internal buffer is empty, return an empty bytes object. If n is zero, return empty bytes object immediately. If n is positive, this function try to read `n` bytes, and may return less or equal bytes than requested, but at least one byte. If EOF was received before any byte is read, this function returns empty byte object. Returned value is not limited with limit, configured at stream creation. If stream was paused, this function will automatically resume it if needed. """ _ensure_can_read(self._mode) if self._exception is not None: raise self._exception if n == 0: return b'' if n < 0: # This used to just loop creating a new waiter hoping to # collect everything in self._buffer, but that would # deadlock if the subprocess sends more than self.limit # bytes. So just call self.read(self._limit) until EOF. blocks = [] while True: block = await self.read(self._limit) if not block: break blocks.append(block) return b''.join(blocks) if not self._buffer and not self._eof: await self._wait_for_data('read') # This will work right even if buffer is less than n bytes data = bytes(self._buffer[:n]) del self._buffer[:n] self._maybe_resume_transport() return data async def readexactly(self, n): """Read exactly `n` bytes. Raise an IncompleteReadError if EOF is reached before `n` bytes can be read. The IncompleteReadError.partial attribute of the exception will contain the partial read bytes. if n is zero, return empty bytes object. Returned value is not limited with limit, configured at stream creation. If stream was paused, this function will automatically resume it if needed. """ _ensure_can_read(self._mode) if n < 0: raise ValueError('readexactly size can not be less than zero') if self._exception is not None: raise self._exception if n == 0: return b'' while len(self._buffer) < n: if self._eof: incomplete = bytes(self._buffer) self._buffer.clear() raise exceptions.IncompleteReadError(incomplete, n) await self._wait_for_data('readexactly') if len(self._buffer) == n: data = bytes(self._buffer) self._buffer.clear() else: data = bytes(self._buffer[:n]) del self._buffer[:n] self._maybe_resume_transport() return data def __aiter__(self): _ensure_can_read(self._mode) return self async def __anext__(self): val = await self.readline() if val == b'': raise StopAsyncIteration return val async def __aenter__(self): return self async def __aexit__(self, exc_type, exc_val, exc_tb): await self.close()