.. _tut-structures: *************** Data Structures *************** This chapter describes some things you've learned about already in more detail, and adds some new things as well. .. _tut-morelists: More on Lists ============= The list data type has some more methods. Here are all of the methods of list objects: .. method:: list.append(x) :noindex: Add an item to the end of the list; equivalent to ``a[len(a):] = [x]``. .. method:: list.extend(L) :noindex: Extend the list by appending all the items in the given list; equivalent to ``a[len(a):] = L``. .. method:: list.insert(i, x) :noindex: Insert an item at a given position. The first argument is the index of the element before which to insert, so ``a.insert(0, x)`` inserts at the front of the list, and ``a.insert(len(a), x)`` is equivalent to ``a.append(x)``. .. method:: list.remove(x) :noindex: Remove the first item from the list whose value is *x*. It is an error if there is no such item. .. method:: list.pop([i]) :noindex: Remove the item at the given position in the list, and return it. If no index is specified, ``a.pop()`` removes and returns the last item in the list. (The square brackets around the *i* in the method signature denote that the parameter is optional, not that you should type square brackets at that position. You will see this notation frequently in the Python Library Reference.) .. method:: list.index(x) :noindex: Return the index in the list of the first item whose value is *x*. It is an error if there is no such item. .. method:: list.count(x) :noindex: Return the number of times *x* appears in the list. .. method:: list.sort() :noindex: Sort the items of the list, in place. .. method:: list.reverse() :noindex: Reverse the elements of the list, in place. An example that uses most of the list methods:: >>> a = [66.25, 333, 333, 1, 1234.5] >>> print a.count(333), a.count(66.25), a.count('x') 2 1 0 >>> a.insert(2, -1) >>> a.append(333) >>> a [66.25, 333, -1, 333, 1, 1234.5, 333] >>> a.index(333) 1 >>> a.remove(333) >>> a [66.25, -1, 333, 1, 1234.5, 333] >>> a.reverse() >>> a [333, 1234.5, 1, 333, -1, 66.25] >>> a.sort() >>> a [-1, 1, 66.25, 333, 333, 1234.5] .. _tut-lists-as-stacks: Using Lists as Stacks --------------------- .. sectionauthor:: Ka-Ping Yee The list methods make it very easy to use a list as a stack, where the last element added is the first element retrieved ("last-in, first-out"). To add an item to the top of the stack, use :meth:`append`. To retrieve an item from the top of the stack, use :meth:`pop` without an explicit index. For example:: >>> stack = [3, 4, 5] >>> stack.append(6) >>> stack.append(7) >>> stack [3, 4, 5, 6, 7] >>> stack.pop() 7 >>> stack [3, 4, 5, 6] >>> stack.pop() 6 >>> stack.pop() 5 >>> stack [3, 4] .. _tut-lists-as-queues: Using Lists as Queues --------------------- .. sectionauthor:: Ka-Ping Yee It is also possible to use a list as a queue, where the first element added is the first element retrieved ("first-in, first-out"); however, lists are not efficient for this purpose. While appends and pops from the end of list are fast, doing inserts or pops from the beginning of a list is slow (because all of the other elements have to be shifted by one). To implement a queue, use :class:`collections.deque` which was designed to have fast appends and pops from both ends. For example:: >>> from collections import deque >>> queue = deque(["Eric", "John", "Michael"]) >>> queue.append("Terry") # Terry arrives >>> queue.append("Graham") # Graham arrives >>> queue.popleft() # The first to arrive now leaves 'Eric' >>> queue.popleft() # The second to arrive now leaves 'John' >>> queue # Remaining queue in order of arrival deque(['Michael', 'Terry', 'Graham']) .. _tut-functional: Functional Programming Tools ---------------------------- There are three built-in functions that are very useful when used with lists: :func:`filter`, :func:`map`, and :func:`reduce`. ``filter(function, sequence)`` returns a sequence consisting of those items from the sequence for which ``function(item)`` is true. If *sequence* is a :class:`string` or :class:`tuple`, the result will be of the same type; otherwise, it is always a :class:`list`. For example, to compute a sequence of numbers not divisible by 2 or 3:: >>> def f(x): return x % 2 != 0 and x % 3 != 0 ... >>> filter(f, range(2, 25)) [5, 7, 11, 13, 17, 19, 23] ``map(function, sequence)`` calls ``function(item)`` for each of the sequence's items and returns a list of the return values. For example, to compute some cubes:: >>> def cube(x): return x*x*x ... >>> map(cube, range(1, 11)) [1, 8, 27, 64, 125, 216, 343, 512, 729, 1000] More than one sequence may be passed; the function must then have as many arguments as there are sequences and is called with the corresponding item from each sequence (or ``None`` if some sequence is shorter than another). For example:: >>> seq = range(8) >>> def add(x, y): return x+y ... >>> map(add, seq, seq) [0, 2, 4, 6, 8, 10, 12, 14] ``reduce(function, sequence)`` returns a single value constructed by calling the binary function *function* on the first two items of the sequence, then on the result and the next item, and so on. For example, to compute the sum of the numbers 1 through 10:: >>> def add(x,y): return x+y ... >>> reduce(add, range(1, 11)) 55 If there's only one item in the sequence, its value is returned; if the sequence is empty, an exception is raised. A third argument can be passed to indicate the starting value. In this case the starting value is returned for an empty sequence, and the function is first applied to the starting value and the first sequence item, then to the result and the next item, and so on. For example, :: >>> def sum(seq): ... def add(x,y): return x+y ... return reduce(add, seq, 0) ... >>> sum(range(1, 11)) 55 >>> sum([]) 0 Don't use this example's definition of :func:`sum`: since summing numbers is such a common need, a built-in function ``sum(sequence)`` is already provided, and works exactly like this. .. _tut-listcomps: List Comprehensions ------------------- List comprehensions provide a concise way to create lists. Common applications are to make new lists where each element is the result of some operations applied to each member of another sequence or iterable, or to create a subsequence of those elements that satisfy a certain condition. For example, assume we want to create a list of squares, like:: >>> squares = [] >>> for x in range(10): ... squares.append(x**2) ... >>> squares [0, 1, 4, 9, 16, 25, 36, 49, 64, 81] We can obtain the same result with:: squares = [x**2 for x in range(10)] This is also equivalent to ``squares = map(lambda x: x**2, range(10))``, but it's more concise and readable. A list comprehension consists of brackets containing an expression followed by a :keyword:`for` clause, then zero or more :keyword:`for` or :keyword:`if` clauses. The result will be a new list resulting from evaluating the expression in the context of the :keyword:`for` and :keyword:`if` clauses which follow it. For example, this listcomp combines the elements of two lists if they are not equal:: >>> [(x, y) for x in [1,2,3] for y in [3,1,4] if x != y] [(1, 3), (1, 4), (2, 3), (2, 1), (2, 4), (3, 1), (3, 4)] and it's equivalent to: >>> combs = [] >>> for x in [1,2,3]: ... for y in [3,1,4]: ... if x != y: ... combs.append((x, y)) ... >>> combs [(1, 3), (1, 4), (2, 3), (2, 1), (2, 4), (3, 1), (3, 4)] Note how the order of the :keyword:`for` and :keyword:`if` statements is the same in both these snippets. If the expression is a tuple (e.g. the ``(x, y)`` in the previous example), it must be parenthesized. :: >>> vec = [-4, -2, 0, 2, 4] >>> # create a new list with the values doubled >>> [x*2 for x in vec] [-8, -4, 0, 4, 8] >>> # filter the list to exclude negative numbers >>> [x for x in vec if x >= 0] [0, 2, 4] >>> # apply a function to all the elements >>> [abs(x) for x in vec] [4, 2, 0, 2, 4] >>> # call a method on each element >>> freshfruit = [' banana', ' loganberry ', 'passion fruit '] >>> [weapon.strip() for weapon in freshfruit] ['banana', 'loganberry', 'passion fruit'] >>> # create a list of 2-tuples like (number, square) >>> [(x, x**2) for x in range(6)] [(0, 0), (1, 1), (2, 4), (3, 9), (4, 16), (5, 25)] >>> # the tuple must be parenthesized, otherwise an error is raised >>> [x, x**2 for x in range(6)] File "", line 1 [x, x**2 for x in range(6)] ^ SyntaxError: invalid syntax >>> # flatten a list using a listcomp with two 'for' >>> vec = [[1,2,3], [4,5,6], [7,8,9]] >>> [num for elem in vec for num in elem] [1, 2, 3, 4, 5, 6, 7, 8, 9] List comprehensions can contain complex expressions and nested functions:: >>> from math import pi >>> [str(round(pi, i)) for i in range(1, 6)] ['3.1', '3.14', '3.142', '3.1416', '3.14159'] Nested List Comprehensions '''''''''''''''''''''''''' The initial expression in a list comprehension can be any arbitrary expression, including another list comprehension. Consider the following example of a 3x4 matrix implemented as a list of 3 lists of length 4:: >>> matrix = [ ... [1, 2, 3, 4], ... [5, 6, 7, 8], ... [9, 10, 11, 12], ... ] The following list comprehension will transpose rows and columns:: >>> [[row[i] for row in matrix] for i in range(4)] [[1, 5, 9], [2, 6, 10], [3, 7, 11], [4, 8, 12]] As we saw in the previous section, the nested listcomp is evaluated in the context of the :keyword:`for` that follows it, so this example is equivalent to:: >>> transposed = [] >>> for i in range(4): ... transposed.append([row[i] for row in matrix]) ... >>> transposed [[1, 5, 9], [2, 6, 10], [3, 7, 11], [4, 8, 12]] which, in turn, is the same as:: >>> transposed = [] >>> for i in range(4): ... # the following 3 lines implement the nested listcomp ... transposed_row = [] ... for row in matrix: ... transposed_row.append(row[i]) ... transposed.append(transposed_row) ... >>> transposed [[1, 5, 9], [2, 6, 10], [3, 7, 11], [4, 8, 12]] In the real world, you should prefer built-in functions to complex flow statements. The :func:`zip` function would do a great job for this use case:: >>> zip(*matrix) [(1, 5, 9), (2, 6, 10), (3, 7, 11), (4, 8, 12)] See :ref:`tut-unpacking-arguments` for details on the asterisk in this line. .. _tut-del: The :keyword:`del` statement ============================ There is a way to remove an item from a list given its index instead of its value: the :keyword:`del` statement. This differs from the :meth:`pop` method which returns a value. The :keyword:`del` statement can also be used to remove slices from a list or clear the entire list (which we did earlier by assignment of an empty list to the slice). For example:: >>> a = [-1, 1, 66.25, 333, 333, 1234.5] >>> del a[0] >>> a [1, 66.25, 333, 333, 1234.5] >>> del a[2:4] >>> a [1, 66.25, 1234.5] >>> del a[:] >>> a [] :keyword:`del` can also be used to delete entire variables:: >>> del a Referencing the name ``a`` hereafter is an error (at least until another value is assigned to it). We'll find other uses for :keyword:`del` later. .. _tut-tuples: Tuples and Sequences ==================== We saw that lists and strings have many common properties, such as indexing and slicing operations. They are two examples of *sequence* data types (see :ref:`typesseq`). Since Python is an evolving language, other sequence data types may be added. There is also another standard sequence data type: the *tuple*. A tuple consists of a number of values separated by commas, for instance:: >>> t = 12345, 54321, 'hello!' >>> t[0] 12345 >>> t (12345, 54321, 'hello!') >>> # Tuples may be nested: ... u = t, (1, 2, 3, 4, 5) >>> u ((12345, 54321, 'hello!'), (1, 2, 3, 4, 5)) >>> # Tuples are immutable: ... t[0] = 88888 Traceback (most recent call last): File "", line 1, in TypeError: 'tuple' object does not support item assignment >>> # but they can contain mutable objects: ... v = ([1, 2, 3], [3, 2, 1]) >>> v ([1, 2, 3], [3, 2, 1]) As you see, on output tuples are always enclosed in parentheses, so that nested tuples are interpreted correctly; they may be input with or without surrounding parentheses, although often parentheses are necessary anyway (if the tuple is part of a larger expression). It is not possible to assign to the individual items of a tuple, however it is possible to create tuples which contain mutable objects, such as lists. Though tuples may seem similar to lists, they are often used in different situations and for different purposes. Tuples are :term:`immutable`, and usually contain an heterogeneous sequence of elements that are accessed via unpacking (see later in this section) or indexing (or even by attribute in the case of :func:`namedtuples `). Lists are :term:`mutable`, and their elements are usually homogeneous and are accessed by iterating over the list. A special problem is the construction of tuples containing 0 or 1 items: the syntax has some extra quirks to accommodate these. Empty tuples are constructed by an empty pair of parentheses; a tuple with one item is constructed by following a value with a comma (it is not sufficient to enclose a single value in parentheses). Ugly, but effective. For example:: >>> empty = () >>> singleton = 'hello', # <-- note trailing comma >>> len(empty) 0 >>> len(singleton) 1 >>> singleton ('hello',) The statement ``t = 12345, 54321, 'hello!'`` is an example of *tuple packing*: the values ``12345``, ``54321`` and ``'hello!'`` are packed together in a tuple. The reverse operation is also possible:: >>> x, y, z = t This is called, appropriately enough, *sequence unpacking* and works for any sequence on the right-hand side. Sequence unpacking requires the list of variables on the left to have the same number of elements as the length of the sequence. Note that multiple assignment is really just a combination of tuple packing and sequence unpacking. .. _tut-sets: Sets ==== Python also includes a data type for *sets*. A set is an unordered collection with no duplicate elements. Basic uses include membership testing and eliminating duplicate entries. Set objects also support mathematical operations like union, intersection, difference, and symmetric difference. Curly braces or the :func:`set` function can be used to create sets. Note: to create an empty set you have to use ``set()``, not ``{}``; the latter creates an empty dictionary, a data structure that we discuss in the next section. Here is a brief demonstration:: >>> basket = ['apple', 'orange', 'apple', 'pear', 'orange', 'banana'] >>> fruit = set(basket) # create a set without duplicates >>> fruit set(['orange', 'pear', 'apple', 'banana']) >>> 'orange' in fruit # fast membership testing True >>> 'crabgrass' in fruit False >>> # Demonstrate set operations on unique letters from two words ... >>> a = set('abracadabra') >>> b = set('alacazam') >>> a # unique letters in a set(['a', 'r', 'b', 'c', 'd']) >>> a - b # letters in a but not in b set(['r', 'd', 'b']) >>> a | b # letters in either a or b set(['a', 'c', 'r', 'd', 'b', 'm', 'z', 'l']) >>> a & b # letters in both a and b set(['a', 'c']) >>> a ^ b # letters in a or b but not both set(['r', 'd', 'b', 'm', 'z', 'l']) Similarly to :ref:`list comprehensions `, set comprehensions are also supported:: >>> a = {x for x in 'abracadabra' if x not in 'abc'} >>> a set(['r', 'd']) .. _tut-dictionaries: Dictionaries ============ Another useful data type built into Python is the *dictionary* (see :ref:`typesmapping`). Dictionaries are sometimes found in other languages as "associative memories" or "associative arrays". Unlike sequences, which are indexed by a range of numbers, dictionaries are indexed by *keys*, which can be any immutable type; strings and numbers can always be keys. Tuples can be used as keys if they contain only strings, numbers, or tuples; if a tuple contains any mutable object either directly or indirectly, it cannot be used as a key. You can't use lists as keys, since lists can be modified in place using index assignments, slice assignments, or methods like :meth:`append` and :meth:`extend`. It is best to think of a dictionary as an unordered set of *key: value* pairs, with the requirement that the keys are unique (within one dictionary). A pair of braces creates an empty dictionary: ``{}``. Placing a comma-separated list of key:value pairs within the braces adds initial key:value pairs to the dictionary; this is also the way dictionaries are written on output. The main operations on a dictionary are storing a value with some key and extracting the value given the key. It is also possible to delete a key:value pair with ``del``. If you store using a key that is already in use, the old value associated with that key is forgotten. It is an error to extract a value using a non-existent key. The :meth:`keys` method of a dictionary object returns a list of all the keys used in the dictionary, in arbitrary order (if you want it sorted, just apply the :func:`sorted` function to it). To check whether a single key is in the dictionary, use the :keyword:`in` keyword. Here is a small example using a dictionary:: >>> tel = {'jack': 4098, 'sape': 4139} >>> tel['guido'] = 4127 >>> tel {'sape': 4139, 'guido': 4127, 'jack': 4098} >>> tel['jack'] 4098 >>> del tel['sape'] >>> tel['irv'] = 4127 >>> tel {'guido': 4127, 'irv': 4127, 'jack': 4098} >>> tel.keys() ['guido', 'irv', 'jack'] >>> 'guido' in tel True The :func:`dict` constructor builds dictionaries directly from sequences of key-value pairs:: >>> dict([('sape', 4139), ('guido', 4127), ('jack', 4098)]) {'sape': 4139, 'jack': 4098, 'guido': 4127} In addition, dict comprehensions can be used to create dictionaries from arbitrary key and value expressions:: >>> {x: x**2 for x in (2, 4, 6)} {2: 4, 4: 16, 6: 36} When the keys are simple strings, it is sometimes easier to specify pairs using keyword arguments:: >>> dict(sape=4139, guido=4127, jack=4098) {'sape': 4139, 'jack': 4098, 'guido': 4127} .. _tut-loopidioms: Looping Techniques ================== When looping through a sequence, the position index and corresponding value can be retrieved at the same time using the :func:`enumerate` function. :: >>> for i, v in enumerate(['tic', 'tac', 'toe']): ... print i, v ... 0 tic 1 tac 2 toe To loop over two or more sequences at the same time, the entries can be paired with the :func:`zip` function. :: >>> questions = ['name', 'quest', 'favorite color'] >>> answers = ['lancelot', 'the holy grail', 'blue'] >>> for q, a in zip(questions, answers): ... print 'What is your {0}? It is {1}.'.format(q, a) ... What is your name? It is lancelot. What is your quest? It is the holy grail. What is your favorite color? It is blue. To loop over a sequence in reverse, first specify the sequence in a forward direction and then call the :func:`reversed` function. :: >>> for i in reversed(xrange(1,10,2)): ... print i ... 9 7 5 3 1 To loop over a sequence in sorted order, use the :func:`sorted` function which returns a new sorted list while leaving the source unaltered. :: >>> basket = ['apple', 'orange', 'apple', 'pear', 'orange', 'banana'] >>> for f in sorted(set(basket)): ... print f ... apple banana orange pear When looping through dictionaries, the key and corresponding value can be retrieved at the same time using the :meth:`iteritems` method. :: >>> knights = {'gallahad': 'the pure', 'robin': 'the brave'} >>> for k, v in knights.iteritems(): ... print k, v ... gallahad the pure robin the brave To change a sequence you are iterating over while inside the loop (for example to duplicate certain items), it is recommended that you first make a copy. Looping over a sequence does not implicitly make a copy. The slice notation makes this especially convenient:: >>> words = ['cat', 'window', 'defenestrate'] >>> for w in words[:]: # Loop over a slice copy of the entire list. ... if len(w) > 6: ... words.insert(0, w) ... >>> words ['defenestrate', 'cat', 'window', 'defenestrate'] .. _tut-conditions: More on Conditions ================== The conditions used in ``while`` and ``if`` statements can contain any operators, not just comparisons. The comparison operators ``in`` and ``not in`` check whether a value occurs (does not occur) in a sequence. The operators ``is`` and ``is not`` compare whether two objects are really the same object; this only matters for mutable objects like lists. All comparison operators have the same priority, which is lower than that of all numerical operators. Comparisons can be chained. For example, ``a < b == c`` tests whether ``a`` is less than ``b`` and moreover ``b`` equals ``c``. Comparisons may be combined using the Boolean operators ``and`` and ``or``, and the outcome of a comparison (or of any other Boolean expression) may be negated with ``not``. These have lower priorities than comparison operators; between them, ``not`` has the highest priority and ``or`` the lowest, so that ``A and not B or C`` is equivalent to ``(A and (not B)) or C``. As always, parentheses can be used to express the desired composition. The Boolean operators ``and`` and ``or`` are so-called *short-circuit* operators: their arguments are evaluated from left to right, and evaluation stops as soon as the outcome is determined. For example, if ``A`` and ``C`` are true but ``B`` is false, ``A and B and C`` does not evaluate the expression ``C``. When used as a general value and not as a Boolean, the return value of a short-circuit operator is the last evaluated argument. It is possible to assign the result of a comparison or other Boolean expression to a variable. For example, :: >>> string1, string2, string3 = '', 'Trondheim', 'Hammer Dance' >>> non_null = string1 or string2 or string3 >>> non_null 'Trondheim' Note that in Python, unlike C, assignment cannot occur inside expressions. C programmers may grumble about this, but it avoids a common class of problems encountered in C programs: typing ``=`` in an expression when ``==`` was intended. .. _tut-comparing: Comparing Sequences and Other Types =================================== Sequence objects may be compared to other objects with the same sequence type. The comparison uses *lexicographical* ordering: first the first two items are compared, and if they differ this determines the outcome of the comparison; if they are equal, the next two items are compared, and so on, until either sequence is exhausted. If two items to be compared are themselves sequences of the same type, the lexicographical comparison is carried out recursively. If all items of two sequences compare equal, the sequences are considered equal. If one sequence is an initial sub-sequence of the other, the shorter sequence is the smaller (lesser) one. Lexicographical ordering for strings uses the ASCII ordering for individual characters. Some examples of comparisons between sequences of the same type:: (1, 2, 3) < (1, 2, 4) [1, 2, 3] < [1, 2, 4] 'ABC' < 'C' < 'Pascal' < 'Python' (1, 2, 3, 4) < (1, 2, 4) (1, 2) < (1, 2, -1) (1, 2, 3) == (1.0, 2.0, 3.0) (1, 2, ('aa', 'ab')) < (1, 2, ('abc', 'a'), 4) Note that comparing objects of different types is legal. The outcome is deterministic but arbitrary: the types are ordered by their name. Thus, a list is always smaller than a string, a string is always smaller than a tuple, etc. [#]_ Mixed numeric types are compared according to their numeric value, so 0 equals 0.0, etc. .. rubric:: Footnotes .. [#] The rules for comparing objects of different types should not be relied upon; they may change in a future version of the language.