d158b85896
This doesn't need to do nearly as much for the new conversion, so
...
simplify.
1999-08-02 14:32:46 +00:00
031e222499
A few small improvements to the conversion.
1999-08-02 14:32:11 +00:00
eac8abee4e
Ripped out the old conversion.
1999-07-29 22:42:27 +00:00
865e9ff98e
Added a few more passes through the document fragment. Not actually
...
very interesting.
1999-07-29 22:23:19 +00:00
96e4a06fa6
Massive changes.
...
Separate the Conversion class into a base and a subclass; the subclass
is pretty minimal but the separation is useful for....
NewConversion: New class that implements a somewhat different
approach to the conversion. This uses a table of
instances (rather than tuples) that have more
information than the tuples used for the older
conversion procedure. This allows a lot more control
over the conversion, and it seems to be pretty
stable.
TableEntry,
Parameter: New classes that are used to build the conversion
specification used by NewConversion.
TableParser: xmllib.XMLParser subclass that builds a conversion
specification from an XML document.
load_table(): Convenience function that loads a table from a file.
main(): Added flags --new and --old; these select which conversion is
used. The default is --new.
Several fixes have been made in the old conversion as well; these were
done before writing & switching to the new conversion, and should be
archived.
The next checkin of this file will discard the old conversion; is is
kept in this checkin to allow it to be retrieved if needed, and to
avoid lossing the bugfixes that have been made to it in the interim.
1999-07-29 22:22:13 +00:00
2394c98c05
Minor updates.
1999-07-29 22:14:09 +00:00
ada2de67b3
Use the (new) buildFragment() method of the EsisBuilder rather than
...
implementing it all here.
1999-07-29 22:13:31 +00:00
f032cdbb24
Some minor cleanup.
1999-07-29 22:03:52 +00:00
bc2285eb60
Conversion specification, used by a new path through latex2esis.py.
...
The specific markup conversion is coded here instead of an even more
cryptic table in the code of latex2esis.py.
1999-07-29 22:03:11 +00:00
478a265057
Minor update.
1999-07-29 22:01:39 +00:00
5772f33b6c
Add support for bzip2 using --bzip2.
1999-07-27 16:29:30 +00:00
8ea15f3495
Add --zip parameter; make this able to produce .zip files as well as
...
.tgz files.
1999-07-23 16:09:11 +00:00
06c5a8b52e
Make the default target xml instead of sgml.
1999-07-22 13:57:12 +00:00
7dbde51f97
Make the default target xml instead of sgml.
...
Use a temporary file to pass results from latex2esis.py to
docfixer.py; this makes for better error detection by make (if the
first pipeline stage fails, make wasn't catching it).
1999-07-22 13:56:51 +00:00
924b42de9c
When looking for things that might be modules, include *module.c from
...
the Modules/ directory. Most of the remaining undocumented modules
seem to be living there.
1999-06-17 18:49:18 +00:00
0eb7b2a659
Enhanced docstring and some comments.
...
_begin_macro_rx: Fixed RE that didn't properly allow a space after
the name of the macro. This affects the conversion
of the tutorial.
1999-05-19 17:37:37 +00:00
c4811d8208
Modify to perform "---" to "—" conversion outside of
...
verbatim-like environments. The list of verbatim-like environments is
a defined by a variable in main().
1999-05-18 17:34:51 +00:00
c41e1e5f5e
Remove the "---" to "—" conversion; this is wrong in verbatim
...
environments. Move the conversion to esis2sgml.py.
1999-05-18 17:33:01 +00:00
e779d4f03b
Lots of adjustments to deal with the document content now being stored
...
in a fragment rather than the main document object.
1999-05-10 19:36:52 +00:00
54fb7fb9d0
Some more fixes.
...
Add controls for some of the esoteric indexing macros.
1999-05-10 19:36:03 +00:00
2697694e4a
ExtendedEsisBuilder.push(): Override inherited definition. We don't
...
want to push nodes into the document, but into a document
fragment, since we're not necesarily working with something
that's well-formed.
1999-05-07 21:14:28 +00:00
f79acbdaa1
Fix some bugs introduced in the previous checkin.
1999-05-07 21:12:21 +00:00
96c00b0b5e
Define & use a Conversion object. It's still really ugly, but at
...
least there's a token object in here now! ;-)
1999-05-07 19:59:02 +00:00
a871c2e747
Make it work for "manual" documents as well as "howto" documents.
...
This still doesn't understand anything about multiple source files or
checking time dependencies.
1999-05-06 19:37:38 +00:00
4437fdf265
Make sure latex2html doesn't produce a hard link between foo/foo.html
...
and foo/index.html. Make a copy instead. (Appearantly some tar
openers on non-Unixlike systems can't handle hard links.)
1999-05-03 14:29:07 +00:00
d2d1eef025
Make sure latex2html doesn't produce a hard link from $part/$part.html
...
and $part/index.html. Make a copy instead. (Appearantly some tar
openers on non-Unixlike systems can't handle hard links.)
1999-05-03 14:27:45 +00:00
c1db512b2b
Nasty hack to add a --numeric parameter to skip the use of "logical"
...
names.
1999-04-29 18:28:48 +00:00
c4a623ebdc
Add command line flags to just list the files that contain the
...
offending lines or to include line numbers in the output.
1999-04-22 20:32:21 +00:00
693a2c6581
Script to locate uses of \module where the module referred to is not
...
the module being documented at that point in the documentation; these
are candidates for conversion to \refmodule, which produces a
hyperlink in the HTML and PDF versions of the output.
1999-04-22 13:08:09 +00:00
c260c0bcdb
Further refinement, to allow this to handle the library reference as
...
well as the other "manual" documents.
1999-04-14 13:13:32 +00:00
79d41ccdd3
Add some support for the module index, so this can be used to build
...
the .aux file for any of the "manual" class documents.
1999-04-14 05:02:06 +00:00
2e1094e4ef
Use #!/usr/bin/env python instead of #!/usr/local/bin/python.
1999-04-09 14:53:35 +00:00
e3fd1064de
Make this simpler; don't care about the paper size. Require that the
...
files exist in the current directory.
Add "Documenting Python" to the list of documents listed.
1999-03-18 14:57:53 +00:00
87a42cd61b
Add support for <platform>, some cleanup of module section after
...
creating the <moduleinfo>.
1999-03-11 17:35:12 +00:00
1acb8740eb
Oops, missed a couple of substitutions in the templates.
1999-03-04 21:33:55 +00:00
5f7832d125
Allow many more aspects of the generated page to be parameterized, and
...
add a useful usage message. Use 'mkmodindex --help' to display it.
1999-03-04 21:19:57 +00:00
aaa0d9a3a4
Record the value of $TEXINPUTS in the transcript.
...
Job.message(): New method. Takes care of writing a message to the
user and adding it to the transcript.
1999-03-03 21:57:58 +00:00
b1d839866c
Obsolete; use the Python version instead.
1999-03-03 20:28:17 +00:00
8b88093b95
Re-written mkhowto in Python; this should be at least a little more
...
portable.
Several things that had been done by running a python script are now a
matter of importing the right module and running a function with a few
parameters.
1999-03-03 20:24:30 +00:00
749f943a6b
process(): New function that contains the "orchestration" of the
...
actual work.
main(): Just handle the command line and filename determination,
calling process() to do the work.
These changes make this more import-friendly.
1999-03-03 19:36:23 +00:00
7c8754fafb
process(): New function that contains the "orchestration" of the
...
actual work.
main(): Just handle the command line and filename determination,
calling process() to do the work.
These changes make this more import-friendly.
1999-03-03 19:25:56 +00:00
7f492ad7b8
Be more flexible to support platform annotations.
1999-03-02 16:22:56 +00:00
75ab7a6fa4
Clean up *.pla files -- platform annotation information.
1999-03-02 16:22:26 +00:00
093c97a36f
ignore_from_idx(): Fixed bug in regular expression.
1999-02-24 18:39:47 +00:00
2ef38a7a42
Script to combine module index files. Given a list of files that look
...
like modindex.html, create a combined modindex.html file that lists
all the modules. Takes the same parameters as buildindex.py.
1999-02-24 17:33:07 +00:00
711fe02ac3
process_nodes(): New function.
...
main(): Moved the node processing between input and ouptut to
process_nodes().
1999-02-24 16:36:48 +00:00
b6cf9a4fc4
Script to help identify undocumented modules. Use -h or --help for
...
usage information.
1999-02-23 23:07:48 +00:00
93d762fc7a
Mark <verbatim> elements that represent interactive sessions; these
...
become <interpreter-session> elements.
1999-02-18 16:32:21 +00:00
997eec7cca
Minor adjustments to reflect esis2sgml.py changes.
...
Added "esis" target to only generate the ESIS data.
1999-02-18 16:31:05 +00:00
607aed7a2c
Some adjustments, mostly to make it more general.
1999-02-18 16:30:16 +00:00
Fred Drake