52a48e62c6
bpo-37707: Exclude expensive unit tests from PGO task (GH-15009)
...
Mark some individual tests to skip when --pgo is used. The tests
marked increase the PGO task time significantly and likely don't
help improve optimization of the final executable.
2019-07-30 11:08:18 -07:00
1561703a78
bpo-42349: Switch to test.support.unlink per review by Serhiy Storchaka (GH-8529)
...
Serhiy Storchaka pointed out that using test.support.unlink was preferable
2018-07-28 18:27:11 +01:00
6a62e1d365
bpo-34239: Convert test_bz2 to use tempfile ( #8485 )
...
* bpo-34239: Convert test_bz2 to use tempfile
test_bz2 currently uses the test.support.TESTFN functionality which creates a temporary file local to the test directory named around the pid.
This can give rise to race conditions where tests are competing with each other to delete and recreate the file.
This change converts the tests to use tempfile.mkstemp which gives a different file every time from the system's temp area
2018-07-26 22:05:00 +01:00
d019bc8319
bpo-31787: Prevent refleaks when calling __init__() more than once (GH-3995)
2018-02-13 19:28:33 +09:00
8c663fd60e
Replace KB unit with KiB ( #4293 )
...
kB (*kilo* byte) unit means 1000 bytes, whereas KiB ("kibibyte")
means 1024 bytes. KB was misused: replace kB or KB with KiB when
appropriate.
Same change for MB and GB which become MiB and GiB.
Change the output of Tools/iobench/iobench.py.
Round also the size of the documentation from 5.5 MB to 5 MiB.
2017-11-08 14:44:44 -08:00
a6a4dc816d
bpo-31370: Remove support for threads-less builds ( #3385 )
...
* Remove Setup.config
* Always define WITH_THREAD for compatibility.
2017-09-07 18:56:24 +02:00
70d28a184c
Remove unused imports.
2016-12-16 20:00:15 +02:00
e0e9d5f312
Issue #28664 : test_bz2 now works on non-Windows platforms without bunzip2
...
(e.g. on Android).
2016-11-11 17:11:33 +02:00
5adc22b330
Issue #28664 : test_bz2 now works on non-Windows platforms without bunzip2
...
(e.g. on Android).
2016-11-11 17:10:24 +02:00
8bdd4480c4
Issue #28225 : bz2 module now supports pathlib
...
Initial patch by Ethan Furman.
2016-10-02 20:07:06 +03:00
55c9239af6
Issue #28275 : Merge bz2 fix from 3.5 into 3.6
2016-10-01 03:11:04 +00:00
38317d3318
Issue #28275 : Clean up to avoid use-after-free after bzip decompress failure
2016-10-01 02:45:17 +00:00
5f1a5187f7
Use sequence repetition instead of bytes constructor with integer argument.
2016-09-11 14:41:02 +03:00
2dbc6e6bce
Issue #23529 : Limit the size of decompressed data when reading from
...
GzipFile, BZ2File or LZMAFile. This defeats denial of service attacks
using compressed bombs (i.e. compressed payloads which decompress to a huge
size).
Patch by Martin Panter and Nikolaus Rath.
2015-04-11 00:31:01 +02:00
c05e260ecb
Issue #23799 : Added test.support.start_threads() for running and cleaning up
...
multiple threads.
2015-04-01 13:06:18 +03:00
263dcd20a3
Issue #23799 : Added test.support.start_threads() for running and cleaning up
...
multiple threads.
2015-04-01 13:01:14 +03:00
e71258a0e6
Issue #15955 : Add an option to limit the output size in bz2.decompress().
...
Patch by Nikolaus Rath.
2015-02-26 13:08:07 +01:00
85c3033670
Use os.devnull instead of hardcoded '/dev/null'.
2015-02-15 13:58:23 +02:00
bad1257c96
Issue #22777 : Test pickling with all protocols.
2014-12-15 14:03:42 +02:00
8f8ec92de8
Issue #19936 : Added executable bits or shebang lines to Python scripts which
...
requires them. Disable executable bits and shebang lines in test and
benchmark files in order to prevent using a random system python, and in
source files of modules which don't provide command line interface. Fixed
shebang lines in the unittestgui and checkpip scripts.
2014-01-16 17:33:23 +02:00
b992a0e102
Issue #19936 : Added executable bits or shebang lines to Python scripts which
...
requires them. Disable executable bits and shebang lines in test and
benchmark files in order to prevent using a random system python, and in
source files of modules which don't provide command line interface. Fixed
shebang line to use python3 executable in the unittestgui script.
2014-01-16 17:15:49 +02:00
786ac7b27d
Issue #19886 : Use better estimated memory requirements for bigmem tests.
...
Incorrect requirements can cause memory swapping.
2014-01-10 13:39:27 +02:00
4847e4e1f4
Issue #19886 : Use better estimated memory requirements for bigmem tests.
...
Incorrect requirements can cause memory swapping.
2014-01-10 13:37:54 +02:00
ae02d07bc2
Closes #19839 : Fix regression in bz2 module's handling of non-bzip2 data at EOF.
...
Also fix an analogous bug (not a regression) in the lzma module.
2013-12-04 23:29:51 +01:00
1de19ac7da
#19839 : Fix regression in bz2 module's handling of non-bzip2 data at EOF.
2013-12-04 23:01:15 +01:00
e6514f533e
#19395 : Raise exception when pickling a (BZ2|LZMA)(Compressor|Decompressor).
...
The underlying C libraries provide no mechanism for serializing compressor and
decompressor objects, so actually pickling these classes is impractical.
Previously, these objects would be pickled without error, but attempting to use
a deserialized instance would segfault the interpreter.
2013-10-28 21:41:24 +01:00
3797065ac5
#19395 : Raise exception when pickling a (BZ2|LZMA)(Compressor|Decompressor).
...
The underlying C libraries provide no mechanism for serializing compressor and
decompressor objects, so actually pickling these classes is impractical.
Previously, these objects would be pickled without error, but attempting to use
a deserialized instance would segfault the interpreter.
2013-10-28 21:35:23 +01:00
8a9e99cffc
Issue #19223 : Add support for the 'x' mode to the bz2 module.
...
Patch by Tim Heaney and Vajrasky Kok.
2013-10-19 00:11:06 +02:00
b3bd624a55
Back out patch for #1159051 , which caused backwards compatibility problems.
2013-05-12 11:57:26 +02:00
cc0172c007
Issue #1159051 : GzipFile now raises EOFError when reading a corrupted file
...
with truncated header or footer.
Added tests for reading truncated gzip, bzip2, and lzma files.
2013-01-22 17:11:07 +02:00
57f9b7a124
Issue #1159051 : GzipFile now raises EOFError when reading a corrupted file
...
with truncated header or footer.
Added tests for reading truncated gzip, bzip2, and lzma files.
2013-01-22 17:07:49 +02:00
7c3922f44c
Issue #1159051 : GzipFile now raises EOFError when reading a corrupted file
...
with truncated header or footer.
Added tests for reading truncated gzip and bzip2 files.
2013-01-22 17:01:59 +02:00
ef408aea3d
Issue #16828 : Fix error incorrectly raised by bz2.compress(b'') and bz2.BZ2Compressor.compress(b'').
...
Initial patch by Martin Packman.
2013-01-02 23:13:53 +01:00
57cb81d161
Issue #16828 : Fix error incorrectly raised by bz2.compress('').
...
Initial patch by Martin Packman.
2013-01-02 23:05:56 +01:00
638fb9bbed
Issue #16828 : Fix error incorrectly raised by bz2.compress('').
...
Patch by Martin Packman.
2013-01-02 23:02:00 +01:00
f7a17b48d7
Replace IOError with OSError ( #16715 )
2012-12-25 16:47:37 +02:00
8ca705d549
Merge: Add test for BZ2Decompressor.decompress("") after end of stream.
2012-10-28 15:22:08 +01:00
6294305c2f
Merge: Add test for BZ2Decompressor.decompress("") after end of stream.
2012-10-28 15:21:37 +01:00
a1952d4120
Add test for BZ2Decompressor.decompress("") after end of stream.
2012-10-28 15:20:48 +01:00
5f8f0d6777
Issue #14398 : Fix size truncation and overflow bugs in bz2 module.
2012-10-21 21:13:27 +02:00
3b4a4f5199
Stylistic tweaks to the bz2 module to make it easier to transplant changes from
...
it to http://pypi.python.org/pypi/bz2file .
2012-10-08 19:20:49 +02:00
f01d695ccd
Closes #16135 : Removal of OS/2 support
2012-10-05 03:36:11 +02:00
10c8791978
Fix GzipFile's handling of filenames given as bytes objects.
...
Add relevant tests for GzipFile, and also for BZ2File and LZMAFile.
2012-06-20 01:48:50 +02:00
af518c198e
Add a function bz2.open(), to match gzip.open().
2012-06-04 23:32:38 +02:00
aebcdba829
Make BZ2File's fileobj support easier to use.
...
The fileobj argument was added during the 3.3 development cycle, so this change
does not break backward compatibility with 3.2.
2012-06-04 23:31:20 +02:00
ae557d767f
Fix seekable() in BZ2File and LZMAFile to check whether the underlying file supports seek().
2012-02-12 01:51:38 +02:00
72750a85f9
Issue #13809 : Make bz2 module work with threads disabled.
...
Original patch by Amaury Forgeot d'Arc.
2012-01-18 01:57:14 +02:00
44ae4a2a22
Make error handling in BZ2File.{readable,seekable,writable,fileno} consistent with TextIOWrapper.
...
Also, add tests for these methods.
2011-11-30 17:39:30 +02:00
1a3ff48c55
Start fixing test_bigmem:
...
- bigmemtest is replaced by precisionbigmemtest
- add a poor man's watchdog thread to print memory consumption
2011-10-04 10:28:37 +02:00
249ab5e8d1
BZ2File now uses the compresslevel argument given by the caller,
...
instead of ignoring it and always using a compression level of 9.
2011-09-11 22:38:11 +02:00
Neil Schemenauer
Tim Golden
Oren Milman
Victor Stinner
Antoine Pitrou
Serhiy Storchaka
Berker Peksag
Martin Panter
Antoine Pitrou
Nadeem Vawda
Georg Brandl
Andrew Svetlov
Jesus Cea