Commit Graph

363 Commits

Author SHA1 Message Date
Tim Peters 47e52ee0c5 SF patch 936813: fast modular exponentiation
This checkin is adapted from part 2 (of 3) of Trevor Perrin's patch set.

BACKWARD INCOMPATIBILITY:  SHIFT must now be divisible by 5.  AFAIK,
nobody will care.  long_pow() could be complicated to worm around that,
if necessary.

long_pow():
  - BUGFIX:  This leaked the base and power when the power was negative
    (and so the computation delegated to float pow).
  - Instead of doing right-to-left exponentiation, do left-to-right.  This
    is more efficient for small bases, which is the common case.
  - In addition, if the exponent is large (more than FIVEARY_CUTOFF
    digits), precompute [a**i % c for i in range(32)], and go left to
    right 5 bits at a time.
l_divmod():
  - The signature changed so that callers who don't want the quotient,
    or don't want the remainder, can pass NULL in the slot they don't
    want.  This saves them from having to declare a vrbl for unwanted
    stuff, and remembering to decref it.
long_mod(), long_div(), long_classic_div():
  - Adjust to new l_divmod() signature, and simplified as a result.
2004-08-30 02:44:38 +00:00
Tim Peters 0973b99e1c SF patch 936813: fast modular exponentiation
This checkin is adapted from part 1 (of 3) of Trevor Perrin's patch set.

x_mul()
  - sped a little by optimizing the C
  - sped a lot (~2X) if it's doing a square; note that long_pow() squares
    often
k_mul()
  - more cache-friendly now if it's doing a square
KARATSUBA_CUTOFF
  - boosted; gradeschool mult is quicker now, and it may have been too low
    for many platforms anyway
KARATSUBA_SQUARE_CUTOFF
  - new
  - since x_mul is a lot faster at squaring now, the point at which
    Karatsuba pays for squaring is much higher than for general mult
2004-08-29 22:16:50 +00:00
Raymond Hettinger f466793fcc SF patch 703666: Several objects don't decref tmp on failure in subtype_new
Submitted By: Christopher A. Craig

Fillin some missing decrefs.
2003-06-28 20:04:25 +00:00
Tim Peters c7bc0b98e7 SF patch 730594: assert from longobject.c, line 1215.
Some version of gcc in the "RTEMS port running on the Coldfire (m5200)
processor" generates bad code for a loop in long_from_binary_base(),
comparing the wrong half of an int to a short.  The patch changes the
decl of the short temp to be an int temp instead.  This "simplifies"
the code enough that gcc no longer blows it.
2003-05-05 20:39:43 +00:00
Jeremy Hylton fc61f9a36e Silence compiler warnings in VC 7. 2003-05-01 21:31:53 +00:00
Thomas Heller a4ea603b05 SF # 595026: support for masks in getargs.c.
New functions:
  unsigned long PyInt_AsUnsignedLongMask(PyObject *);
  unsigned PY_LONG_LONG) PyInt_AsUnsignedLongLongMask(PyObject *);
  unsigned long PyLong_AsUnsignedLongMask(PyObject *);
  unsigned PY_LONG_LONG) PyLong_AsUnsignedLongLongMask(PyObject *);

New and changed format codes:

b unsigned char 0..UCHAR_MAX
B unsigned char none **
h unsigned short 0..USHRT_MAX
H unsigned short none **
i int INT_MIN..INT_MAX
I * unsigned int 0..UINT_MAX
l long LONG_MIN..LONG_MAX
k * unsigned long none
L long long LLONG_MIN..LLONG_MAX
K * unsigned long long none

Notes:

* New format codes.

** Changed from previous "range-and-a-half" to "none"; the
range-and-a-half checking wasn't particularly useful.

New test test_getargs2.py, to verify all this.
2003-04-17 18:55:45 +00:00
Martin v. Löwis b9a0f91218 Rename LONG_LONG to PY_LONG_LONG. Fixes #710285. 2003-03-29 10:06:18 +00:00
Neal Norwitz d5a65a77cf Fix SF bug #689659, 64-bit int and long hash keys incompatible
On a 64-bit machine, a dictionary could contain duplicate int/long keys
if the value was > 2**32.
2003-02-23 23:11:41 +00:00
Guido van Rossum 004a65c9b1 _PyLong_Sign(): remove an assert that needed a variable ndigits that
wasn't used outside the assert (and hence caused a compiler warning
about an unused variable in NDEBUG mode).  The assert wasn't very
useful any more.

_PyLong_NumBits(): moved the calculation of ndigits after asserting
that v != NULL.
2003-02-03 15:28:19 +00:00
Tim Peters 1a3b19a6e9 long_from_binary_base(): Sped this a little by computing the # of bits
needed outside the first loop.
2003-02-02 17:33:53 +00:00
Tim Peters efb9625b81 Tightened a too-generous assert. 2003-02-02 08:05:32 +00:00
Tim Peters bf2674be0e long(string, base) now takes time linear in len(string) when base is a
power of 2.  Enabled the tail end of test_long() in pickletester.py
because it no longer takes forever when run from test_pickle.py.
2003-02-02 07:51:32 +00:00
Tim Peters ee1a53cbb1 cPickle.c: Full support for the new LONG1 and LONG4. Added comments.
Assorted code cleanups; e.g., sizeof(char) is 1 by definition, so there's
no need to do things like multiply by sizeof(char) in hairy malloc
arguments.  Fixed an undetected-overflow bug in readline_file().

longobject.c:  Fixed a really stupid bug in the new _PyLong_NumBits.

pickle.py:  Fixed stupid bug in save_long():  When proto is 2, it
wrote LONG1 or LONG4, but forgot to return then -- it went on to
append the proto 1 LONG opcode too.
Fixed equally stupid cancelling bugs in load_long1() and
load_long4():  they *returned* the unpickled long instead of pushing
it on the stack.  The return values were ignored.  Tests passed
before only because save_long() pickled the long twice.

Fixed bugs in encode_long().

Noted that decode_long() is quadratic-time despite our hopes,
because long(string, 16) is still quadratic-time in len(string).
It's hex() that's linear-time.  I don't know a way to make decode_long()
linear-time in Python, short of maybe transforming the 256's-complement
bytes into marshal's funky internal format, and letting marshal decode
that.  It would be more valuable to make long(string, 16) linear time.

pickletester.py:  Added a global "protocols" vector so tests can try
all the protocols in a sane way.  Changed test_ints() and test_unicode()
to do so.  Added a new test_long(), but the tail end of it is disabled
because it "takes forever" under pickle.py (but runs very quickly under
cPickle:  cPickle proto 2 for longs is linear-time).
2003-02-02 02:57:53 +00:00
Tim Peters 08a1d9cafc Squash compiler wng about signed/unsigned comparison mismatch. 2003-01-31 21:45:13 +00:00
Tim Peters 5b8132ffa3 _PyLong_NumBits(): The definition of this was too specific to the quirky
needs of pickling longs.  Backed off to a definition that's much easier
to understand.  The pickler will have to work a little harder, but other
uses are more likely to be correct <0.5 wink>.

_PyLong_Sign():  New teensy function to characterize a long, as to <0, ==0,
or >0.
2003-01-31 15:52:05 +00:00
Guido van Rossum 5d9113d8be Implement appropriate __getnewargs__ for all immutable subclassable builtin
types.  The special handling for these can now be removed from save_newobj().
Add some testing for this.

Also add support for setting the 'fast' flag on the Python Pickler class,
which suppresses use of the memo.
2003-01-29 17:58:45 +00:00
Tim Peters baefd9e552 Added new private API function _PyLong_NumBits. This will be used at the
start for the C implemention of new pickle LONG1 and LONG4 opcodes (the
linear-time way to pickle a long is to call _PyLong_AsByteArray, but
the caller has no idea how big an array to allocate, and correct
calculation is a bit subtle).
2003-01-28 20:37:45 +00:00
Neil Schemenauer 0df295889c Consolidate the int and long sequence repeat code. Before the change,
integers checked for integer overflow but longs did not.
2002-12-30 20:19:02 +00:00
Walter Dörwald f171540ab8 Change int() so that passing a string, unicode, float or long argument
that is outside the integer range no longer raises OverflowError, but
returns a long object instead.

This fixes SF bug http://www.python.org/sf/635115
2002-11-19 20:49:15 +00:00
Walter Dörwald 07e147667c Make int("...") return a long if an int would overflow.
Also remove the 512 character limitation for int(u"...") and long(u"...").

This closes SF bug #629989.
2002-11-06 16:15:14 +00:00
Skip Montanaro d581d7792b replace thread state objects' ticker and checkinterval fields with two
globals, _Py_Ticker and _Py_CheckInterval.  This also implements Jeremy's
shortcut in Py_AddPendingCall that zeroes out _Py_Ticker.  This allows the
test in the main loop to only test a single value.

The gory details are at

    http://python.org/sf/602191
2002-09-03 20:10:45 +00:00
Tim Peters 0d2d87d202 long_format(), long_lshift(): Someone on c.l.py is trying to boost
SHIFT and MASK, and widen digit.  One problem is that code of the form

    digit << small_integer

implicitly assumes that the result fits in an int or unsigned int
(platform-dependent, but "int sized" in any case), since digit is
promoted "just" to int or unsigned via the usual integer promotions.
But if digit is typedef'ed as unsigned int, this loses information.
The cure for this is just to cast digit to twodigits first.
2002-08-20 19:00:22 +00:00
Tim Peters e417de0e56 Illustrating by example one good reason not to trust a proof <wink>. 2002-08-15 20:10:45 +00:00
Tim Peters ab86c2be24 k_mul() comments: In honor of Dijkstra, made the proof that "t3 fits"
rigorous instead of hoping for testing not to turn up counterexamples.
Call me heretical, but despite that I'm wholly confident in the proof,
and have done it two different ways now, I still put more faith in
testing ...
2002-08-15 20:06:00 +00:00
Tim Peters 9973d74b2d long_mul(): Simplified exit code. In particular, k_mul() returns a
normalized result, so no point to normalizing it again.  The number
of test+branches was also excessive.
2002-08-15 19:41:06 +00:00
Tim Peters 48d52c0fcc k_mul() comments: Simplified the simplified explanation of why ah*bh and
al*bl "always fit":  it's actually trivial given what came before.
2002-08-14 17:07:32 +00:00
Tim Peters 8e966ee49a k_mul() comments: Explained why there's always enough room to subtract
ah*bh and al*bl.  This is much easier than explaining why that's true
for (ah+al)*(bh+bl), and follows directly from the simple part of the
(ah+al)*(bh+bl) explanation.
2002-08-14 16:36:23 +00:00
Tim Peters cba6e96929 Fixed error in new comment. 2002-08-13 20:42:00 +00:00
Tim Peters d6974a54ab k_mul(): The fix for (ah+al)*(bh+bl) spilling 1 bit beyond the allocated
space is no longer needed, so removed the code.  It was only possible when
a degenerate (ah->ob_size == 0) split happened, but after that fix went
in I added k_lopsided_mul(), which saves the body of k_mul() from seeing
a degenerate split.  So this removes code, and adds a honking long comment
block explaining why spilling out of bounds isn't possible anymore.  Note:
ff we end up spilling out of bounds anyway <wink>, an assert in v_iadd()
is certain to trigger.
2002-08-13 20:37:51 +00:00
Guido van Rossum d8c8048f5e Fix comment for PyLong_AsUnsignedLong() to say that the return value
is an *unsigned* long.
2002-08-13 00:24:58 +00:00
Tim Peters 1203403743 k_lopsided_mul(): This allocated more space for bslice than necessary. 2002-08-12 22:10:00 +00:00
Tim Peters 6000464d08 Added new function k_lopsided_mul(), which is much more efficient than
k_mul() when inputs have vastly different sizes, and a little more
efficient when they're close to a factor of 2 out of whack.

I consider this done now, although I'll set up some more correctness
tests to run overnight.
2002-08-12 22:01:34 +00:00
Tim Peters 547607c4bf k_mul(): Moved an assert down. In a debug build, interrupting a
multiply via Ctrl+C could cause a NULL-pointer dereference due to
the assert.
2002-08-12 19:43:49 +00:00
Tim Peters 70b041bbe7 k_mul(): Heh -- I checked in two fixes for the last problem. Only keep
the good one <wink>.  Also checked in a test-aid by mistake.
2002-08-12 19:38:01 +00:00
Tim Peters d8b2173ef9 k_mul(): White-box testing turned up that (ah+al)*(bh+bl) can, in rare
cases, overflow the allocated result object by 1 bit.  In such cases,
it would have been brought back into range if we subtracted al*bl and
ah*bh from it first, but I don't want to do that because it hurts cache
behavior.  Instead we just ignore the excess bit when it appears -- in
effect, this is forcing unsigned mod BASE**(asize + bsize) arithmetic
in a case where that doesn't happen all by itself.
2002-08-12 19:30:26 +00:00
Tim Peters 115c888b97 x_mul(): Made life easier for C optimizers in the "grade school"
algorithm.  MSVC 6 wasn't impressed <wink>.

Something odd:  the x_mul algorithm appears to get substantially worse
than quadratic time as the inputs grow larger:

bits in each input   x_mul time   k_mul time
------------------   ----------   ----------
             15360         0.01         0.00
             30720         0.04         0.01
             61440         0.16         0.04
            122880         0.64         0.14
            245760         2.56         0.40
            491520        10.76         1.23
            983040        71.28         3.69
           1966080       459.31        11.07

That is, x_mul is perfectly quadratic-time until a little burp at
2.56->10.76, and after that goes to hell in a hurry.  Under Karatsuba,
doubling the input size "should take" 3 times longer instead of 4, and
that remains the case throughout this range.  I conclude that my "be nice
to the cache" reworkings of k_mul() are paying.
2002-08-12 18:25:43 +00:00
Tim Peters d64c1def7c k_mul() and long_mul(): I'm confident that the Karatsuba algorithm is
correct now, so added some final comments, did some cleanup, and enabled
it for all long-int multiplies.  The KARAT envar no longer matters,
although I left some #if 0'ed code in there for my own use (temporary).
k_mul() is still much slower than x_mul() if the inputs have very
differenent sizes, and that still needs to be addressed.
2002-08-12 17:36:03 +00:00
Tim Peters 738eda742c k_mul: Rearranged computation for better cache use. Ignored overflow
(it's possible, but should be harmless -- this requires more thought,
and allocating enough space in advance to prevent it requires exactly
as much thought, to know exactly how much that is -- the end result
certainly fits in the allocated space -- hmm, but that's really all
the thought it needs!  borrows/carries out of the high digits really
are harmless).
2002-08-12 15:08:20 +00:00
Tim Peters 44121a6bc9 x_mul(): This failed to normalize its result.
k_mul():  This didn't allocate enough result space when one input had
more than twice as many bits as the other.  This was partly hidden by
that x_mul() didn't normalize its result.

The Karatsuba recurrence is pretty much hosed if the inputs aren't
roughly the same size.  If one has at least twice as many bits as the
other, we get a degenerate case where the "high half" of the smaller
input is 0.  Added a special case for that, for speed, but despite that
it helped, this can still be much slower than the "grade school" method.
It seems to take a really wild imbalance to trigger that; e.g., a
2**22-bit input times a 1000-bit input on my box runs about twice as slow
under k_mul than under x_mul.  This still needs to be addressed.

I'm also not sure that allocating a->ob_size + b->ob_size digits is
enough, given that this is computing k = (ah+al)*(bh+bl) instead of
k = (ah-al)*(bl-bh); i.e., it's certainly enough for the final result,
but it's vaguely possible that adding in the "artificially" large k may
overflow that temporarily.  If so, an assert will trigger in the debug
build, but we'll probably compute the right result anyway(!).
2002-08-12 06:17:58 +00:00
Tim Peters 877a212678 Introduced helper functions v_iadd and v_isub, for in-place digit-vector
addition and subtraction.  Reworked the tail end of k_mul() to use them.
This saves oodles of one-shot longobject allocations (this is a triply-
recursive routine, so saving one allocation in the body saves 3**n
allocations at depth n; we actually save 2 allocations in the body).
2002-08-12 05:09:36 +00:00
Tim Peters fc07e56844 k_mul(): Repaired another typo in another comment. 2002-08-12 02:54:10 +00:00
Tim Peters 18c15b9bbd k_mul(): Repaired typo in comment. 2002-08-12 02:43:58 +00:00
Tim Peters 5af4e6c739 Cautious introduction of a patch that started from
SF 560379:  Karatsuba multiplication.
Lots of things were changed from that.  This needs a lot more testing,
for correctness and speed, the latter especially when bit lengths are
unbalanced.  For now, the Karatsuba code gets invoked if and only if
envar KARAT exists.
2002-08-12 02:31:19 +00:00
Jeremy Hylton 938ace69a0 staticforward bites the dust.
The staticforward define was needed to support certain broken C
compilers (notably SCO ODT 3.0, perhaps early AIX as well) botched the
static keyword when it was used with a forward declaration of a static
initialized structure.  Standard C allows the forward declaration with
static, and we've decided to stop catering to broken C compilers.  (In
fact, we expect that the compilers are all fixed eight years later.)

I'm leaving staticforward and statichere defined in object.h as
static.  This is only for backwards compatibility with C extensions
that might still use it.

XXX I haven't updated the documentation.
2002-07-17 16:30:39 +00:00
Guido van Rossum b6d29b7856 Undef MIN and MAX before defining them, to avoid warnings on certain
platforms.
2002-07-13 14:31:51 +00:00
Martin v. Löwis 14f8b4cfcb Patch #568124: Add doc string macros. 2002-06-13 20:33:02 +00:00
Jeremy Hylton c4ad0bcbe5 Clarify return value of PyLong_AsLongLong().
The function is documented to return -1 on error.  If res was < 0, it
returned res.  It wasn't clear that the invariant was res < 0 iff res
== -1.
2002-04-23 20:01:20 +00:00
Neil Schemenauer aa769ae468 PyObject_Del can now be used as a function designator. 2002-04-12 02:44:10 +00:00
Martin v. Löwis c8bb9eba31 Patch #494047: removes 64-bit ?: to cope on plan9. 2002-03-09 12:02:59 +00:00
Tim Peters 5329cdb3ce _PyLong_Copy(): was creating a copy of the absolute value, but should
copy the sign too.  Added a test to test_descr to ensure that it does.

Bugfix candidate.
2002-03-02 04:18:04 +00:00
Martin v. Löwis a5854c24a2 Patch #508038: Do not use a type as a variable name. 2002-02-16 23:39:10 +00:00
Tim Peters 6f97e493e1 long_true_divide(): decref its converted arguments. test_long_future.py
run in an infinite loop no longer grows.  Thanks to Neal Norwitz for
determining that test leaked!
2001-11-04 23:09:40 +00:00
Guido van Rossum 9475a2310d Enable GC for new-style instances. This touches lots of files, since
many types were subclassable but had a xxx_dealloc function that
called PyObject_DEL(self) directly instead of deferring to
self->ob_type->tp_free(self).  It is permissible to set tp_free in the
type object directly to _PyObject_Del, for non-GC types, or to
_PyObject_GC_Del, for GC types.  Still, PyObject_DEL was a tad faster,
so I'm fearing that our pystone rating is going down again.  I'm not
sure if doing something like

void xxx_dealloc(PyObject *self)
{
	if (PyXxxCheckExact(self))
		PyObject_DEL(self);
	else
		self->ob_type->tp_free(self);
}

is any faster than always calling the else branch, so I haven't
attempted that -- however those types whose own dealloc is fancier
(int, float, unicode) do use this pattern.
2001-10-05 20:51:39 +00:00
Tim Peters d38b1c74f3 SF [#466125] PyLong_AsLongLong works for any integer.
Generalize PyLong_AsLongLong to accept int arguments too.  The real point
is so that PyArg_ParseTuple's 'L' code does too.  That code was
undocumented (AFAICT), so documented it.
2001-09-30 05:09:37 +00:00
Guido van Rossum 1952e388ca Add additional coercion support for "self subtypes" to int, long,
float (compare the recent checkin to complex).  Added tests for these.
2001-09-19 01:25:16 +00:00
Guido van Rossum 7e35d57c0c A fix for SF bug #461546 (bug in long_mul).
Both int and long multiplication are changed to be more careful in
their assumptions about when one of the arguments is a sequence: the
assumption that at least one of the arguments must be an int (or long,
respectively) is still held, but the assumption that these don't smell
like sequences is no longer true: a subtype of int or long may well
have a sequence-repeat thingie!
2001-09-15 03:14:32 +00:00
Skip Montanaro bafedecc06 based upon a suggestion in c.l.py, this slight expansion of the
OverflowError message seems reasonable.
2001-09-13 19:05:30 +00:00
Tim Peters 40c397dd56 long_invert(): tiny speed and space optimization. 2001-09-11 23:24:22 +00:00
Tim Peters 69c2de3ad6 More bug 460020. Disable a number of long optimizations for long subclasses. 2001-09-11 22:31:33 +00:00
Tim Peters 64b5ce3a69 SF bug #460020: bug or feature: unicode() and subclasses.
Given an immutable type M, and an instance I of a subclass of M, the
constructor call M(I) was just returning I as-is; but it should return a
new instance of M.  This fixes it for M in {int, long}.  Strings, floats
and tuples remain to be done.
Added new macros PyInt_CheckExact and PyLong_CheckExact, to more easily
distinguish between "is" and "is a" (i.e., only an int passes
PyInt_CheckExact, while any sublass of int passes PyInt_Check).
Added private API function _PyLong_Copy.
2001-09-10 20:52:51 +00:00
Tim Peters e56ed9ba15 long_true_divide: reliably force underflow to 0 when the denominator
has more bits than the numerator than can be counted in a C int (yes,
that's unlikely, and no, I'm not adding a test case with a 2 gigabit
long).
2001-09-06 21:59:14 +00:00
Tim Peters 4c483c4d8e Make the error msgs in our pow() implementations consistent. 2001-09-05 06:24:58 +00:00
Tim Peters 57f282a2a0 Try to recover from that glibc's ldexp apparently doesn't set errno on
overflow.  Needs testing on Linux (test_long.py and test_long_future.py
especially).
2001-09-05 05:38:10 +00:00
Tim Peters e2a600099d Change long/long true division to return as many good bits as it can;
e.g., (1L << 40000)/(1L << 40001) returns 0.5, not Inf or NaN or whatever.
2001-09-04 06:17:36 +00:00
Tim Peters 20dab9f168 Move long_true_divide next to the other division routines (for clarity!). 2001-09-04 05:31:47 +00:00
Tim Peters 9fffa3eea3 Raise OverflowError when appropriate on long->float conversion. Most of
the fiddling is simply due to that no caller of PyLong_AsDouble ever
checked for failure (so that's fixing old bugs).  PyLong_AsDouble is much
faster for big inputs now too, but that's more of a happy consequence
than a design goal.
2001-09-04 05:14:19 +00:00
Tim Peters a1c1b0f468 Introduce new private API function _PyLong_AsScaledDouble. Not used yet,
but will be the foundation for Good Things:
+ Speed PyLong_AsDouble.
+ Give PyLong_AsDouble the ability to detect overflow.
+ Make true division of long/long nearly as accurate as possible (no
  spurious infinities or NaNs).
+ Return non-insane results from math.log and math.log10 when passing a
  long that can't be approximated by a double better than HUGE_VAL.
2001-09-04 02:50:49 +00:00
Tim Peters 32f453eaa4 New restriction on pow(x, y, z): If z is not None, x and y must be of
integer types, and y must be >= 0.  See discussion at
http://sf.net/tracker/index.php?func=detail&aid=457066&group_id=5470&atid=105470
2001-09-03 08:35:41 +00:00
Guido van Rossum 393661d15f Add warning mode for classic division, almost exactly as specified in
PEP 238.  Changes:

- add a new flag variable Py_DivisionWarningFlag, declared in
  pydebug.h, defined in object.c, set in main.c, and used in
  {int,long,float,complex}object.c.  When this flag is set, the
  classic division operator issues a DeprecationWarning message.

- add a new API PyRun_SimpleStringFlags() to match
  PyRun_SimpleString().  The main() function calls this so that
  commands run with -c can also benefit from -Dnew.

- While I was at it, I changed the usage message in main() somewhat:
  alphabetized the options, split it in *four* parts to fit in under
  512 bytes (not that I still believe this is necessary -- doc strings
  elsewhere are much longer), and perhaps most visibly, don't display
  the full list of options on each command line error.  Instead, the
  full list is only displayed when -h is used, and otherwise a brief
  reminder of -h is displayed.  When -h is used, write to stdout so
  that you can do `python -h | more'.

Notes:

- I don't want to use the -W option to control whether the classic
  division warning is issued or not, because the machinery to decide
  whether to display the warning or not is very expensive (it involves
  calling into the warnings.py module).  You can use -Werror to turn
  the warnings into exceptions though.

- The -Dnew option doesn't select future division for all of the
  program -- only for the __main__ module.  I don't know if I'll ever
  change this -- it would require changes to the .pyc file magic
  number to do it right, and a more global notion of compiler flags.

- You can usefully combine -Dwarn and -Dnew: this gives the __main__
  module new division, and warns about classic division everywhere
  else.
2001-08-31 17:40:15 +00:00
Guido van Rossum 13228a6f09 Ah, the joy of writing test cases...
long_subtype_new(): fix a typo (type->ob_size instead of
tmp->ob_size).
2001-08-30 15:54:44 +00:00
Guido van Rossum bef1417f9f Make int, long and float subclassable.
This uses a slightly wimpy and wasteful approach, but it works. :-)
2001-08-29 15:47:46 +00:00
Martin v. Löwis 339d0f720e Patch #445762: Support --disable-unicode
- Do not compile unicodeobject, unicodectype, and unicodedata if Unicode is disabled
- check for Py_USING_UNICODE in all places that use Unicode functions
- disables unicode literals, and the builtin functions
- add the types.StringTypes list
- remove Unicode literals from most tests.
2001-08-17 18:39:25 +00:00
Guido van Rossum 4668b000a1 Implement PEP 238 in its (almost) full glory.
This introduces:

- A new operator // that means floor division (the kind of division
  where 1/2 is 0).

- The "future division" statement ("from __future__ import division)
  which changes the meaning of the / operator to implement "true
  division" (where 1/2 is 0.5).

- New overloadable operators __truediv__ and __floordiv__.

- New slots in the PyNumberMethods struct for true and floor division,
  new abstract APIs for them, new opcodes, and so on.

I emphasize that without the future division statement, the semantics
of / will remain unchanged until Python 3.0.

Not yet implemented are warnings (default off) when / is used with int
or long arguments.

This has been on display since 7/31 as SF patch #443474.

Flames to /dev/null.
2001-08-08 05:00:18 +00:00
Tim Peters 6d6c1a35e0 Merge of descr-branch back into trunk. 2001-08-02 04:15:00 +00:00
Tim Peters 0d5dd68692 Python.h: Don't attempt to redefine NDEBUG if it's already defined.
Others:  Remove redundant includes of assert.h.
2001-07-15 18:38:47 +00:00
Tim Peters 586b2e3f3d long_format: Simplify the overly elaborate base-is-a-power-of-2 code. 2001-07-15 09:11:14 +00:00
Tim Peters 212e614f60 divrem1 & long_format: found a clean way to factor divrem1 so that
long_format can reuse a scratch area for its repeated divisions (instead
of malloc/free for every digit produced); speeds str(long)/repr(long).
2001-07-14 12:23:19 +00:00
Tim Peters c8a6b9b6d6 long_format(): Simplify new code a bit. 2001-07-14 11:01:28 +00:00
Tim Peters fad225f1ba long_format(): Easy speedup for output bases that aren't a power of 2 (in
particular, str(long) and repr(long) use base 10, and that gets a factor
of 4 speedup).  Another factor of 2 can be gotten by refactoring divrem1 to
support in-place division, but that started getting messy so I'm leaving
that out.
2001-07-13 02:59:26 +00:00
Guido van Rossum 0ec9abaa2b On long to the negative long power, let float handle it instead of
raising an error.  This was one of the two issues that the VPython
folks were particularly problematic for their students.  (The other
one was integer division...)  This implements (my) SF patch #440487.
2001-07-12 11:21:17 +00:00
Tim Peters 70128a1ba6 PyLong_{As, From}VoidPtr: cleanup, replacing assumptions in comments with
#if/#error constructs.
2001-06-16 08:48:40 +00:00
Tim Peters cf37dfc3db Change IS_LITTLE_ENDIAN macro -- a little faster now. 2001-06-14 18:42:50 +00:00
Tim Peters ede0509111 _PyLong_AsByteArray: simplify the logic for dealing with the most-
significant digits sign bits.  Again no change in semantics.
2001-06-14 08:53:38 +00:00
Tim Peters ce9de2f79a PyLong_From{Unsigned,}Long: count the # of digits first, so no more space
is allocated than needed (used to allocate 80 bytes of digit space no
matter how small the long input).  This also runs faster, at least on 32-
bit boxes.
2001-06-14 04:56:19 +00:00
Tim Peters f251d06a66 _PyLong_FromByteArray: changed decl of "carry" to match "thisbyte". No
semantic change, but a bit clearer and may help a really stupid compiler
avoid pointless runtime length conversions.
2001-06-13 21:09:15 +00:00
Tim Peters 05607ad4fd _PyLong_AsByteArray: Don't do the "delicate overflow" check unless it's
truly needed; usually saves a little time, but no change in semantics.
2001-06-13 21:01:27 +00:00
Tim Peters 898cf85c25 _PyLong_AsByteArray: added assert that the input is normalized. This is
outside the function's control, but is crucial to correct operation.
2001-06-13 20:50:08 +00:00
Tim Peters 9cb0c38fff PyLong_As{Unsigned,}LongLong: fiddled final result casting. 2001-06-13 20:45:17 +00:00
Tim Peters d1a7da6c0d longobject.c:
Replaced PyLong_{As,From}{Unsigned,}LongLong guts with calls
    to _PyLong_{As,From}ByteArray.
_testcapimodule.c:
    Added strong tests of PyLong_{As,From}{Unsigned,}LongLong.

Fixes SF bug #432552 PyLong_AsLongLong() problems.
Possible bugfix candidate, but the fix relies on code added to longobject
to support the new q/Q structmodule format codes.
2001-06-13 00:35:57 +00:00
Tim Peters 8bc84b4391 _PyLong_{As,From}ByteArray: Minor code rearrangement aimed at improving
clarity.  Should have no effect visible to callers.
2001-06-12 19:17:03 +00:00
Tim Peters 7a3bfc3a47 Added q/Q standard (x-platform 8-byte ints) mode in struct module.
This completes the q/Q project.

longobject.c _PyLong_AsByteArray:  The original code had a gross bug:
the most-significant Python digit doesn't necessarily have SHIFT
significant bits, and you really need to count how many copies of the sign
bit it has else spurious overflow errors result.

test_struct.py:  This now does exhaustive std q/Q testing at, and on both
sides of, all relevant power-of-2 boundaries, both positive and negative.

NEWS:  Added brief dict news while I was at it.
2001-06-12 01:22:22 +00:00
Tim Peters 2a9b367385 Two new private longobject API functions,
_PyLong_FromByteArray
    _PyLong_AsByteArray
Untested and probably buggy -- they compile OK, but nothing calls them
yet.  Will soon be called by the struct module, to implement x-platform
'q' and 'Q'.
If other people have uses for them, we could move them into the public API.
See longobject.h for usage details.
2001-06-11 21:23:58 +00:00
Guido van Rossum 6fd867b04d Rich comparisons fall-out:
- Get rid of long_cmp().

- Renamed Py_TPFLAGS_NEWSTYLENUMBER to Py_TPFLAGS_CHECKTYPES.
2001-01-17 15:33:18 +00:00
Neil Schemenauer ba872e2534 Make long a new style number type. Sequence repeat is now done here
now as well.
2001-01-04 01:46:03 +00:00
Fred Drake 661ea26b3d Ka-Ping Yee <ping@lfw.org>:
Changes to error messages to increase consistency & clarity.

This (mostly) closes SourceForge patch #101839.
2000-10-24 19:57:45 +00:00
Tim Peters c54d19043a SF bug 115831 and Ping's SF patch 101751, 0.0**-2.0 returns inf rather than
raise ValueError.  Checked in the patch as far as it went, but also changed
all of ints, longs and floats to raise ZeroDivisionError instead when raising
0 to a negative number.  This is what 754-inspired stds require, as the "true
result" is an infinity obtained from finite operands, i.e. it's a singularity.
Also changed float pow to not be so timid about using its square-and-multiply
algorithm.  Note that what math.pow does is unrelated to what builtin pow
does, and will still vary by platform.
2000-10-06 00:36:09 +00:00
Guido van Rossum 8586991099 REMOVED all CWI, CNRI and BeOpen copyright markings.
This should match the situation in the 1.6b1 tree.
2000-09-01 23:29:29 +00:00
Tim Peters 39dce29365 Fix for http://sourceforge.net/bugs/?func=detailbug&bug_id=111866&group_id=5470.
This was a misleading bug -- the true "bug" was that hash(x) gave an error
return when x is an infinity.  Fixed that.  Added new Py_IS_INFINITY macro to
pyport.h.  Rearranged code to reduce growing duplication in hashing of float and
complex numbers, pushing Trent's earlier stab at that to a logical conclusion.
Fixed exceedingly rare bug where hashing of floats could return -1 even if there
wasn't an error (didn't waste time trying to construct a test case, it was simply
obvious from the code that it *could* happen).  Improved complex hash so that
hash(complex(x, y)) doesn't systematically equal hash(complex(y, x)) anymore.
2000-08-15 03:34:48 +00:00
Peter Schneider-Kamp 7e01890986 merge Include/my*.h into Include/pyport.h
marked my*.h as obsolete
2000-07-31 15:28:04 +00:00
Tim Peters 7d3a511a40 Cray J90 fixes for long ints.
This was a convenient excuse to create the pyport.h file recently
discussed!
Please use new Py_ARITHMETIC_RIGHT_SHIFT when right-shifting a
signed int and you *need* sign-extension.  This is #define'd in
pyport.h, keying off new config symbol SIGNED_RIGHT_SHIFT_ZERO_FILLS.
If you're running on a platform that needs that symbol #define'd,
the std tests never would have worked for you (in particular,
at least test_long would have failed).
The autoconfig stuff got added to Python after my Unix days, so
I don't know how that works.  Would someone please look into doing
& testing an auto-config of the SIGNED_RIGHT_SHIFT_ZERO_FILLS
symbol?  It needs to be defined if & only if, e.g., (-1) >> 3 is
not -1.
2000-07-08 04:17:21 +00:00
Tim Peters 43f04a36cf The tail end of x_sub implicitly assumed that an unsigned short
contains 16 bits.  Not true on Cray J90.
2000-07-08 02:26:47 +00:00
Tim Peters 9ace6bc7ef Got RID of redundant coercions in longobject.c (as spotted by Greg
Stein -- thanks!).  Incidentally removed all the Py_PROTO macros
from object.h, as they prevented my editor from magically finding
the definitions of the "coercion", "cmpfunc" and "reprfunc"
typedefs that were being redundantly applied in longobject.c.
2000-07-08 00:32:04 +00:00
Tim Peters 9f688bf9d2 Some cleanup of longs in prepartion for Cray J90 fixes: got
rid of Py_PROTO, switched to ANSI function decls, and did some
minor fiddling.
2000-07-07 15:53:28 +00:00
Guido van Rossum ffcc3813d8 Change copyright notice - 2nd try. 2000-06-30 23:58:06 +00:00
Guido van Rossum fd71b9e9d4 Change copyright notice. 2000-06-30 23:50:40 +00:00
Fred Drake 4c7fdfc35b Trent Mick <trentm@ActiveState.com>:
This patch correct bounds checking in PyLong_FromLongLong. Currently, it does
not check properly for negative values when checking to see if the incoming
value fits in a long or unsigned long. This results in possible silent
truncation of the value for very large negative values.
2000-06-01 18:37:36 +00:00
Guido van Rossum b18618dab7 Vladimir Marangozov's long-awaited malloc restructuring.
For more comments, read the patches@python.org archives.
For documentation read the comments in mymalloc.h and objimpl.h.

(This is not exactly what Vladimir posted to the patches list; I've
made a few changes, and Vladimir sent me a fix in private email for a
problem that only occurs in debug mode.  I'm also holding back on his
change to main.c, which seems unnecessary to me.)
2000-05-03 23:44:39 +00:00
Guido van Rossum ba71a247ac Simple optimization by Christian Tismer, who gives credit to Lenny
Kneler for reporting this issue: long_mult() is faster when the
smaller argument is on the left.  Swap the arguments accordingly.
2000-04-10 17:31:58 +00:00
Guido van Rossum 9e896b37c7 Marc-Andre's third try at this bulk patch seems to work (except that
his copy of test_contains.py seems to be broken -- the lines he
deleted were already absent).  Checkin messages:


New Unicode support for int(), float(), complex() and long().

- new APIs PyInt_FromUnicode() and PyLong_FromUnicode()
- added support for Unicode to PyFloat_FromString()
- new encoding API PyUnicode_EncodeDecimal() which converts
  Unicode to a decimal char* string (used in the above new
  APIs)
- shortcuts for calls like int(<int object>) and float(<float obj>)
- tests for all of the above

Unicode compares and contains checks:
- comparing Unicode and non-string types now works; TypeErrors
  are masked, all other errors such as ValueError during
  Unicode coercion are passed through (note that PyUnicode_Compare
  does not implement the masking -- PyObject_Compare does this)
- contains now works for non-string types too; TypeErrors are
  masked and 0 returned; all other errors are passed through

Better testing support for the standard codecs.

Misc minor enhancements, such as an alias dbcs for the mbcs codec.

Changes:
- PyLong_FromString() now applies the same error checks as
  does PyInt_FromString(): trailing garbage is reported
  as error and not longer silently ignored. The only characters
  which may be trailing the digits are 'L' and 'l' -- these
  are still silently ignored.
- string.ato?() now directly interface to int(), long() and
  float(). The error strings are now a little different, but
  the type still remains the same. These functions are now
  ready to get declared obsolete ;-)
- PyNumber_Int() now also does a check for embedded NULL chars
  in the input string; PyNumber_Long() already did this (and
  still does)

Followed by:

Looks like I've gone a step too far there... (and test_contains.py
seem to have a bug too).

I've changed back to reporting all errors in PyUnicode_Contains()
and added a few more test cases to test_contains.py (plus corrected
the join() NameError).
2000-04-05 20:11:21 +00:00
Fred Drake 121ee2722e long_format(): Now takes a third parameter, addL; iff true, a
trailing 'L' is appended to the representation,
                otherwise not.

                All existing call sites are modified to pass true for
                addL.

                Remove incorrect statement about external use of this
                function from elsewhere; it's static!

long_str():     Handler for the tp_str slot in the type object.
                Identical to long_repr(), but passes false as the addL
                parameter of long_format().
1999-12-23 15:41:28 +00:00
Guido van Rossum 2c7b8fe618 Fix PR#66. Solution: add error checking around l_divmod() calls in
long_pow().
1999-10-11 22:34:41 +00:00
Guido van Rossum 1a23c2484e Patch by Tim Peters fixing PR#89:
long(+/- infinity) returns nonsense.
1999-09-27 17:11:52 +00:00
Barry Warsaw b5cebfe164 PyLong_FromString(): Nailed a small memory leak. In the str==start
test, we forgot that z is still pointing to a real live object.
DECREF() it before returning.
1999-01-27 17:48:27 +00:00
Guido van Rossum cdd9ae00ba Changes for long file support by Steve Clift.
(Really: moved a bunch of defs to longobject.h.)
1999-01-06 18:50:37 +00:00
Guido van Rossum 3886026bed Remove unreachable code. (Sjoerd) 1998-10-09 13:27:19 +00:00
Guido van Rossum 78694d970f Patches from Greg Stein to support 'P' format in struct module's
native format, as void* (translated to Python int or long).
Also adds PyLong_FromVoidPtr and PyLong_AsVoidPtr to longobject.c.
1998-09-18 14:14:13 +00:00
Guido van Rossum 065ce5a4b7 Undo victim of careless global substitute ("long long_hash" was
changed to "LONG_LONG_hash" in the list of forward decls).  Discovered
by Jason Harper.
1998-09-13 15:37:20 +00:00
Guido van Rossum 3293b07df5 Patch by Mark Hammond to support 64-bit ints on MS platforms.
The MS compiler doesn't call it 'long long', it uses __int64,
so a new #define, LONG_LONG, has been added and all occurrences
of 'long long' are replaced with it.
1998-08-25 16:07:15 +00:00
Guido van Rossum bd3a527f93 Two patches by Jason Harper:
- Faster conversion to string for binary bases: linear instead of quadratic!

- Allocate smaller result for certain masking ops, e.g. (1L<<30000) & 1.
1998-08-11 15:04:47 +00:00
Guido van Rossum 1a8791e0b8 Changes for BeOS, QNX and long long, by Chris Herborth. 1998-08-04 22:46:29 +00:00
Guido van Rossum ac6a37ae55 Fix a potential problem in PyLong_FromString(): could fall through the
for loop with z==NULL but continue to reference z later.
1998-08-04 15:04:06 +00:00
Guido van Rossum e67629774f Add check in long-to-int conversion for at least one digit. 1998-06-22 03:54:46 +00:00
Guido van Rossum f753181272 Subject: Buglet in PyLong_AsLong
From: "Tim Peters" <tim_one@email.msn.com>
To: "Guido van Rossum" <guido@CNRI.Reston.VA.US>
Date: Sat, 23 May 1998 21:45:53 -0400

Guido, the overflow checking in PyLong_AsLong is off a little:

1) If the C in use sign-extends right shifts on signed longs, there's a
spurious overflow error when converting the most-negative int:

Python 1.5.1 (#0, Apr 13 1998, 20:22:04) [MSC 32 bit (Intel)] on win32
Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam
>>> x = -1L << 31
>>> x
-2147483648L
>>> int(x)
Traceback (innermost last):
  File "<stdin>", line 1, in ?
OverflowError: long int too long to convert
>>>

2) If C does not sign-extend, some genuine overflows won't be caught.

The attached should repair both, and, because I installed a new disk and a C
compiler today, it's even been compiled this time <wink>.

Python 1.5.1 (#0, May 23 1998, 20:24:58) [MSC 32 bit (Intel)] on win32
Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam
>>> x = -1L << 31
>>> x
-2147483648L
>>> int(x)
-2147483648
>>> int(-x)
Traceback (innermost last):
  File "<stdin>", line 1, in ?
OverflowError: long int too long to convert
>>> int(-x-1)
2147483647
>>> int(x-1)
Traceback (innermost last):
  File "<stdin>", line 1, in ?
OverflowError: long int too long to convert
>>>

end-casing-ly y'rs  - tim
1998-05-26 14:33:37 +00:00
Guido van Rossum 1109fbca76 Make new gcc -Wall happy 1998-04-10 22:16:39 +00:00
Guido van Rossum c0b618a2cc Quickly renamed the last directory. 1997-05-02 03:12:38 +00:00
Guido van Rossum 2095d24842 Tweaks to keep the Microsoft compiler quiet. 1997-04-09 19:41:24 +00:00
Guido van Rossum f2e499b1d7 New long_lshift, without restriction on size of shift count, by Tim Peters.
This makes it possible to write 1L<<1000000, memory permitting.
1997-03-16 00:37:59 +00:00
Guido van Rossum 45b83915f8 New form of PyFPE_END_PROTECT macro. 1997-03-14 04:32:50 +00:00
Guido van Rossum 09e6ad0c1e Changes for Lee Busby's SIGFPE patch set.
Surround various f.p. operations with  PyFPE_{START,END}_PROTECT macros.
1997-02-14 22:54:21 +00:00
Guido van Rossum 53756b1097 Added PyLong_FromUnsignedLong() and PyLong_AsUnsignedLong(). 1997-01-03 17:14:46 +00:00
Guido van Rossum 472c04f18f Fix newlongobject so it will work for 64-bit as well as 32-bit hardware
(although for 32-bit hardware it's a bit slower than it was).

Make gcc -Wall happy.
1996-12-05 21:57:21 +00:00
Guido van Rossum d266eb460e New permission notice, includes CNRI. 1996-10-25 14:44:06 +00:00
Guido van Rossum 687ec1892b changes for MPW 1995-03-04 22:43:47 +00:00
Guido van Rossum 9fa2c11613 use Py_CHARMASK; and don't check for neg. float to the float power here 1995-02-10 17:00:37 +00:00
Guido van Rossum 3535f6e0a1 long_scan is no longer used 1995-01-17 16:34:13 +00:00
Guido van Rossum c206c766dd fix memory leak and null pointer dereference 1995-01-10 15:23:19 +00:00
Guido van Rossum 6610ad9d6b Added 1995 to copyright message.
floatobject.c: fix hash().
methodobject.c: support METH_FREENAME flag bit.
1995-01-04 19:07:38 +00:00
Guido van Rossum d7047b395e Lots of minor changes. Note for mappingobject.c: the hash table pointer
can now be NULL.
1995-01-02 19:07:15 +00:00
Guido van Rossum 03093a248d * Include/classobject.h, Objects/classobject.c, Python/ceval.c:
entirely redone operator overloading.  The rules for class
	instances are now much more relaxed than for other built-in types
	(whose coerce must still return two objects of the same type)

	* Objects/floatobject.c: add overflow check when converting float
	to int and implement truncation towards zero using ceil/float

	* Objects/longobject.c: change ValueError to OverflowError when
	converting to int

	* Objects/rangeobject.c: modernized

	* Objects/stringobject.c: use HAVE_LIMITS instead of __STDC__

	* Objects/xxobject.c: changed to use new style (not finished?)
1994-09-28 15:51:32 +00:00
Guido van Rossum eb1fafcec1 New patches by Andrew to fix various problems
Add cast for Lance
1994-08-29 12:47:19 +00:00
Guido van Rossum b73cc04e62 * ceval.c, longobject.c, methodobject.c, listnode.c, arraymodule.c,
pythonrun.c: added static forward declarations
* pythonrun.h, ceval.h, longobject.h, node.h: removed declarations of
  static routines
1993-11-01 16:28:59 +00:00
Guido van Rossum 234f942aef * Added gmtime/localtime/mktime and SYSV timezone globals to timemodule.c.
Added $(SYSDEF) to its build rule in Makefile.
* cgensupport.[ch], modsupport.[ch]: removed some old stuff.  Also
  changed files that still used it...  And made several things static
  that weren't but should have been...  And other minor cleanups...
* listobject.[ch]: add external interfaces {set,get}listslice
* socketmodule.c: fix bugs in new send() argument parsing.
* sunaudiodevmodule.c: added flush() and close().
1993-06-17 12:35:49 +00:00
Guido van Rossum 9bfef44d97 * Changed all copyright messages to include 1993.
* Stubs for faster implementation of local variables (not yet finished)
* Added function name to code object.  Print it for code and function
  objects.  THIS MAKES THE .PYC FILE FORMAT INCOMPATIBLE (the version
  number has changed accordingly)
* Print address of self for built-in methods
* New internal functions getattro and setattro (getattr/setattr with
  string object arg)
* Replaced "dictobject" with more powerful "mappingobject"
* New per-type functio tp_hash to implement arbitrary object hashing,
  and hashobject() to interface to it
* Added built-in functions hash(v) and hasattr(v, 'name')
* classobject: made some functions static that accidentally weren't;
  added __hash__ special instance method to implement hash()
* Added proper comparison for built-in methods and functions
1993-03-29 10:43:31 +00:00
Guido van Rossum e537240c25 * Changed many files to use mkvalue() instead of newtupleobject().
* Fixcprt.py: added [-y file] option, do only files younger than file.
* modsupport.[ch]: added vmkvalue().
* intobject.c: use mkvalue().
* stringobject.c: added "formatstring"; renamed string* to string_*;
  ceval.c: call formatstring for string % value.
* longobject.c: close memory leak in divmod.
* parsetok.c: set result node to NULL when returning an error.
1993-03-16 12:15:04 +00:00
Guido van Rossum 34679b7661 * Added Fixcprt.py: script to fix copyright message.
* various modules: added 1993 to copyright.
* thread.c: added copyright notice.
* ceval.c: minor change to error message for "+"
* stdwinmodule.c: check for error from wfetchcolor
* config.c: MS-DOS fixes (define PYTHONPATH, use DELIM, use osdefs.h)
* Add declaration of inittab to import.h
* sysmodule.c: added sys.builtin_module_names
* xxmodule.c, xxobject.c: fix minor errors
1993-01-26 13:33:44 +00:00
Guido van Rossum 0b0db8e3a0 Added separate main program for the Mac: macmain.c
stdwinmodule.c: wsetfont can now return an error
Makefile: add CL_USE and CL_LIB*S; config.c: move CL part around
New things in imgfile; also in Makefile.
longobject.c: fix comparison of negative long ints...  [REAL BUG!]
marshal.c: add dumps() and loads() to read/write strings
timemodule.c: make sure there's always a floatsleep()
posixmodule.c: rationalize struct returned by times()
Makefile: add test target, disable imgfile by default
thread.c: Improved coexistance with dl module (sjoerd)
stdwinmodule.c: Change include stdwin.h if macintosh
rotormodule.c: added missing last argument to RTR_?_region calls
confic.c: merged with configmac.c, added 1993 to copyright message
fileobject.c: int compared to NULL in writestring(); change fopenRF ifdef
timemodule.c: simplify times() using mkvalue; include myselect.h
  earlier (for sequent).
posixmodule: for sequent, include unistd.h instead of explicit
  extern definitions and don't define rename()
Makefile: change misleading/wrong MD5 comments
1993-01-21 16:07:51 +00:00
Guido van Rossum 7066dd75c5 * Makefile: added IMGFILE; moved some stuff around.
* flmodule.c: added some missing functions; changed readonly flags of
  some data members based upon FORMS documentation.
* listobject.c: fixed int/long arg lint bug (bites PC compilers).
* several: removed redundant print methods (repr is good enough).
* posixmodule.c: added (still experimental) process group functions.
1992-09-17 17:54:56 +00:00
Guido van Rossum 1899c2e055 Made builtins int(), long(), float(), oct() and hex() more generic. 1992-09-12 11:09:23 +00:00
Guido van Rossum 2c475427c2 oct(0) should return '0', not '00' 1992-08-14 15:13:07 +00:00
Guido van Rossum e6eefc2231 * classobject.[ch], {float,long,int}object.c, bltinmodule.c:
coercion is now completely generic.
* ceval.c: for instances, don't coerce for + and *; * reverses
  arguments if left one is non-instance numeric and right one sequence.
1992-08-14 12:06:52 +00:00
Guido van Rossum bab9d03855 Copyright for 1992 added 1992-04-05 14:26:55 +00:00
Guido van Rossum 8b27d929a6 Lint stuff (involves casts, yuck!) 1992-03-27 17:27:05 +00:00
Guido van Rossum e32e014c7e Add prototypes.
Change / and % to match divmod.
1992-01-19 16:31:05 +00:00
Guido van Rossum 4c260ff2a5 Changed to 2's complement bitwise ops. Got rid of ZABS etc. 1992-01-14 18:36:43 +00:00
Guido van Rossum afbb8db8e6 Fixed bug in long masking ops. 1991-12-31 13:14:13 +00:00
Guido van Rossum 87e7ea72a6 Use new exceptions. 1991-12-10 14:00:03 +00:00
Guido van Rossum c6913e7da2 Made the sign use one's complement; implemented shifting and masking operators. 1991-11-19 20:26:46 +00:00
Guido van Rossum 3d3037d51a Changed convert to add '0' or '0x' prefix for oct/hex.
Added NULL function pointers for shift and mask ops.
1991-10-24 14:55:57 +00:00
Guido van Rossum 909336104b printobject now returns an error code 1991-06-07 16:10:43 +00:00
Guido van Rossum 149e9ea24c Added dnewlongobject(), function to convert double to long int. 1991-06-03 10:58:24 +00:00
Guido van Rossum c7ec9c98e2 Fix off-by-one error in long_repr.
Implement long_pow.
1991-05-28 21:58:16 +00:00
Guido van Rossum 23d6f0e8e7 Many small changes 1991-05-14 12:06:49 +00:00
Guido van Rossum edcc38aac5 Initial revision 1991-05-05 20:09:44 +00:00