raised by the compiler.
XXX For now, text entered into the interactive intepreter is not
printed in the traceback.
Inspired by a patch from Roman Sulzhyk
compile.c:
Add helper fetch_program_text() that opens a file and reads until it
finds the specified line number. The code is a near duplicate of
similar code in traceback.c.
Modify com_error() to pass two arguments to SyntaxError constructor,
where the second argument contains the offending text when possible.
Modify set_error_location(), now used only by the symtable pass, to
set the text attribute on existing exceptions.
pythonrun.c:
Change parse_syntax_error() to continue of the offset attribute of a
SyntaxError is None. In this case, it sets offset to -1.
Move code from PyErr_PrintEx() into helper function
print_error_text(). In the helper, only print the caret for a
SyntaxError if offset > 0.
Bug was introduced by tricks played to make .pyc files executable
via cmdline arg. Then again, -x worked via a trick to begin with.
If anyone can think of a portable way to test -x, be my guest!
symtable.h, so that they can be used by external module.
Improve error handling in symtable_enter_scope(), which return an
error code that went unchecked by most callers. XXX The error handling
in symtable code is sloppy in general.
Modify symtable to record the line number that begins each scope.
This can help to identify which code block is being referred to when
multiple blocks are bound to the same name.
Add st_scopes dict that is used to preserve scope info when
PyNode_CompileSymtable() is called. Otherwise, this information is
tossed as soon as it is no longer needed.
Add Py_SymtableString() to pythonrun; analogous to Py_CompileString().
They're named as if public, so I did a Bad Thing by changing
PyMarshal_ReadObjectFromFile() to suck up the remainder of the file in one
gulp: anyone who counted on that leaving the file pointer merely at the
end of the next object would be screwed. So restored
PyMarshal_ReadObjectFromFile() to its earlier state, renamed the new greedy
code to PyMarshal_ReadLastObjectFromFile(), and changed Python internals to
call the latter instead.
pythonrun.c: In Py_Finalize, don't reset the initialized flag until after
the exit funcs have run.
atexit.py: in _run_exitfuncs, mutate the list of pending calls in a
threadsafe way. This wasn't a contributor to bug 128475, it just burned
my eyeballs when looking at that bug.
PyRun_FileEx(). These are the same as their non-Ex counterparts but
have an extra argument, a flag telling them to close the file when
done.
Then this is used by Py_Main() and execfile() to close the file after
it is parsed but before it is executed.
Adding APIs seems strange given the feature freeze but it's the only
way I see to close the bug report without incompatible changes.
[ Bug #110616 ] source file stays open after parsing is done (PR#209)
filename and lineno attributes, but do not mask the SyntaxError if we
fail.
This is part of what is needed to close SoruceForge bug #110628
(Jitterbug PR#278).
comments, docstrings or error messages. I fixed two minor things in
test_winreg.py ("didn't" -> "Didn't" and "Didnt" -> "Didn't").
There is a minor style issue involved: Guido seems to have preferred English
grammar (behaviour, honour) in a couple places. This patch changes that to
American, which is the more prominent style in the source. I prefer English
myself, so if English is preferred, I'd be happy to supply a patch myself ;)
used for indentation related errors. This patch includes Ping's
improvements for indentation-related error messages.
Closes SourceForge patches #100734 and #100856.
the number of children of a node exceeds the max possible value for
the short that is used to count them. The Python runtime converts
this parser error into the SyntaxError "expression too long."
need two phase init or fini of the builtin module. Change the call of
_PyBuiltin_Init_1() to _PyBuiltin_Init(). Add a call to
init_exceptions().
Py_Finalize(): Don't call _PyBuiltin_Fini_1(). Instead call
fini_exceptions() but move this to before the thread state is
cleared.
For more comments, read the patches@python.org archives.
For documentation read the comments in mymalloc.h and objimpl.h.
(This is not exactly what Vladimir posted to the patches list; I've
made a few changes, and Vladimir sent me a fix in private email for a
problem that only occurs in debug mode. I'm also holding back on his
change to main.c, which seems unnecessary to me.)
remaining object references if the environment variable PYTHONDUMPREFS
exists. The default behaviour caused problems for background or
otherwise invisible processes that use the debug build of Python.
v temporary variable was never decref'd. Test this by starting up the
interpreter, hitting C-c, then immediately exiting.
Same potential leak can occur if error is E_NOMEM, since the return is
done in the case block. Added Py_XDECREF(v); to both blocks, just
before the return.
think we have our own DOS box (i.e. we're not started from a command
line shell), we print a message and wait for the user to hit a key
before the DOS box is closed.
The hacky heuristic for determining whether we have our *own* DOS box
(due to Mark Hammond) is to test whether we're on line zero...
- Add Py_FrozenFlag, intended to suppress error messages fron
getpath.c in frozen binaries.
- Add Py_GetPythonHome() and Py_SetPythonHome(), intended to allow
embedders to force a different PYTHONHOME.
- Add new interface PyErr_PrintEx(flag); same as PyErr_Print() but
flag determines whether sys.last_* are set or not. PyErr_Print()
now simply calls PyErr_PrintEx(1).
1) The __builtins__ variable in the __main__ module is set to the
__builtin__ module instead of its __dict__.
2) Get rid of the SIGHUP and SIGTERM handlers. They can't be made to
work reliably when threads may be in use, they are Unix specific, and
Python programmers can now program this functionality is a safer way
using the signal module.
Setting interp->builtins to the __builtin__ module instead of to its
dictionary had the unfortunate side effect of always running in
restricted execution mode :-(
I will check in a different way of setting __main__.__builtins__ to
the __builtin__ module later.
Also, there was a typo -- a comment was unfinished, and as a result
some finalizations were not being executed.
In Bart Simpson style,
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
I Will Not Check In Untested Changes.
- The interp->builtins variable (and hence, __main__.__builtins__) is
once again initialized to the built-in *module* instead of its
dictionary.
- The finalization order is once again changed. Signals are finalized
relatively early, because (1) it DECREF's the signal handlers, and if
a signal handler happens to be a bound method, deleting it could cause
problems when there's no current thread around, and (2) we don't want
to risk executing signal handlers during finalization.
- Changed semantics for initialized flag (again); forget the ref
counting, forget the fatal errors -- redundant calls to
Py_Initialize() or Py_Finalize() calls are simply ignored.
- Automatically import site.py on initialization, unless a flag is set
not to do this by main().
the -X command line option.
Py_Initialize(): Handle the two phase initialization of the built-in
module.
Py_Finalize(): Handle the two phase finalization of the built-in
module.
parse_syntax_error(): New function which parses syntax errors that
PyErr_Print() will catch. This correctly parses such errors
regardless of whether PyExc_SyntaxError is an old-style string
exception or new-fangled class exception.
PyErr_Print(): Many changes:
1. Normalize the exception.
2. Handle SystemExit exceptions which might be class based. Digs
the exit code out of the "code" attribute. String based
SystemExit is handled the same as before.
3. Handle SyntaxError exceptions which might be class based. Digs
the various information bits out of the instance's attributes
(see parse_syntax_error() for details). String based
SyntaxError still works too.
4. Don't write the `:' after the exception if the exception is
class based and has an empty string str() value.
for more!).
- The global flags that can be set from environment variables are now
set in Py_Initialize (except the silly Py_SuppressPrint, which no
longer exists). This saves duplicate code in frozenmain.c and main.c.
- Py_GetProgramName() is now here; added Py_SetProgramName(). An
embedding program should no longer provide Py_GetProgramName(),
instead it should call Py_SetProgramName() *before* calling
Py_Initialize().
Py_FdIsInteractive(). The flag is supposed to be set by the -i
command line option. The function is supposed to be called instead of
isatty(). This is used for Lee Busby's wish #1, to have an option
that pretends stdin is interactive even when it really isn't.
- Assume files of types 'PYC ' and 'APPL' are compiled python code
- For mwerks, show status line when program has terminated while
keeping window open.
Jeremy Hylton
Tim Peters
Guido van Rossum
Martin v. Löwis
Fred Drake
Fredrik Lundh
Marc-André Lemburg
Thomas Wouters
Jack Jansen
Barry Warsaw