Setting `-D_XOPEN_SOURCE=700` on HP-UX causes system functions such as chroot to be undefined. This change stops `_XOPEN_SOURCE` begin set on HP-UX
Co-authored-by: Benjamin Peterson <benjamin@python.org>
(cherry picked from commit a9edf44a2d)
Co-authored-by: Ian Norton <inorton@gmail.com>
Fix stdatomic.h header check for ICC compiler: the ICC implementation
lacks atomic_uintptr_t type which is needed by Python.
Test:
* atomic_int and atomic_uintptr_t types
* atomic_load_explicit() and atomic_store_explicit()
* memory_order_relaxed and memory_order_seq_cst constants
But don't test ATOMIC_VAR_INIT(): it's not used in Python.
(cherry picked from commit 028f7349a0)
Co-authored-by: Victor Stinner <vstinner@python.org>
Use fdwalk() on platforms that support it to implement os.closerange().
(cherry picked from commit e20134f889)
Co-authored-by: Jakub Kulík <Kulikjak@gmail.com>
This changeset increases the default size of the stack
for threads on macOS to the size of the stack
of the main thread and reenables the relevant
recursion test.
(cherry picked from commit 1a057bab0f)
Co-authored-by: Ronald Oussoren <ronaldoussoren@mac.com>
Reduce the number of unit tests run for the PGO generation task. This
speeds up the task by a factor of about 15x. Running the full unit test
suite is slow. This change may result in a slightly less optimized build
since not as many code branches will be executed. If you are willing to
wait for the much slower build, the old behavior can be restored using
'./configure [..] PROFILE_TASK="-m test --pgo-extended"'. We make no
guarantees as to which PGO task set produces a faster build. Users who
care should run their own relevant benchmarks as results can depend on
the environment, workload, and compiler tool chain.
(cherry picked from commit 4e16a4a311)
Co-authored-by: Neil Schemenauer <nas-github@arctrix.com>
Under some conditions the earlier fix for bpo-18075, "Infinite recursion
tests triggering a segfault on Mac OS X", now causes failures on macOS
when attempting to change stack limit with resource.setrlimit
resource.RLIMIT_STACK, like regrtest does when running the test suite.
The reverted change had specified a non-default stack size when linking
the python executable on macOS. As of macOS 10.14.4, the previous
code causes a hard failure when running tests, although similar
failures had been seen under some conditions under some earlier
systems. Reverting the change to the interpreter stack size at link
time helped for release builds but caused some tests to fail when
built --with-pydebug. Try the opposite approach: continue to build
the interpreter with an increased stack size on macOS and remove
the failing setrlimit call in regrtest initialization. This will
definitely avoid the resource.RLIMIT_STACK error and should have
no, or fewer, side effects.
(cherry picked from commit 5bbbc733e6)
Co-authored-by: Ned Deily <nad@python.org>
* bpo-26836: Add os.memfd_create()
* Use the glibc wrapper for memfd_create()
Co-Authored-By: Christian Heimes <christian@python.org>
* Fix deletions caused by autoreconf.
* Use MFD_CLOEXEC as the default value for *flags*.
* Add memset_s to configure.ac.
* Revert memset_s changes.
* Apply the requested changes.
* Tweak the docs.
It is also possible to link against a library or executable with a
statically linked libpython, but not both with the same DLL. In fact
building a statically linked python is currently broken on Cygwin
for other (related) reasons.
The same problem applies to other POSIX-like layers over Windows
(MinGW, MSYS) but Python's build system does not seem to attempt
to support those platforms at the moment.
To embed Python into an application, a new --embed option must be
passed to "python3-config --libs --embed" to get "-lpython3.8" (link
the application to libpython). To support both 3.8 and older, try
"python3-config --libs --embed" first and fallback to "python3-config
--libs" (without --embed) if the previous command fails.
Add a pkg-config "python-3.8-embed" module to embed Python into an
application: "pkg-config python-3.8-embed --libs" includes
"-lpython3.8". To support both 3.8 and older, try "pkg-config
python-X.Y-embed --libs" first and fallback to "pkg-config python-X.Y
--libs" (without --embed) if the previous command fails (replace
"X.Y" with the Python version).
On the other hand, "pkg-config python3.8 --libs" no longer contains
"-lpython3.8". C extensions must not be linked to libpython (except
on Android, case handled by the script); this change is backward
incompatible on purpose.
"make install" now also installs "python-3.8-embed.pc".
Under some conditions the earlier fix for bpo-18075, "Infinite recursion
tests triggering a segfault on Mac OS X", now causes failures on macOS
when attempting to change stack limit with resource.setrlimit
resource.RLIMIT_STACK, like regrtest does when running the test suite.
The reverted change had specified a non-default stack size when linking
the python executable on macOS. As of macOS 10.14.4, the previous
code causes a hard failure when running tests, although similar
failures had been seen under some conditions under some earlier
systems. For now, revert the original change and resume using
the default stack size when linking the interpreter.
Release build and debug build are now ABI compatible: the Py_DEBUG
define no longer implies Py_TRACE_REFS define which introduces the
only ABI incompatibility.
A new "./configure --with-trace-refs" build option is now required to
get Py_TRACE_REFS define which adds sys.getobjects() function and
PYTHONDUMPREFS environment variable.
Changes:
* Add ./configure --with-trace-refs
* Py_DEBUG no longer implies Py_TRACE_REFS
"./configure --with-pymalloc" no longer adds the "m" flag to SOABI
(sys.implementation.cache_tag).
Enabling or disabling pymalloc has no impact on the ABI.
Add -fmax-type-align=8 to CFLAGS when clang compiler is detected.
The pymalloc memory allocator aligns memory on 8 bytes. On x86-64,
clang expects alignment on 16 bytes by default and so uses MOVAPS
instruction which can lead to segmentation fault. Instruct clang that
Python is limited to alignemnt on 8 bytes to use MOVUPS instruction
instead: slower but don't trigger a SIGSEGV if the memory is not
aligned on 16 bytes.
Sadly, the flag must be expected to CFLAGS and not just
CFLAGS_NODIST, since third party C extensions can have the same
issue.
On AIX, sys.platform doesn't contain the major version anymore.
Always return 'aix', instead of 'aix3' .. 'aix7'. Since
older Python versions include the version number, it is recommended to
always use sys.platform.startswith('aix').
Use autoconfig to probe for shm_open() and shm_unlink(). Set SHM_NEEDS_LIBRT if we must
link with librt to get the shm_* functions. Change setup.py to use the autoconfig defines. These
changes should make it more likely that _multiprocessing/posixshmem.c gets built correctly on
different platforms.
Use crypt_r() when available instead of crypt() in the crypt module.
As a nice side effect: This also avoids a memory sanitizer flake as clang msan doesn't know about crypt's internal libc allocated buffer.
When compiling 3rd party C extensions, the linker flags used by the
compiler for the interpreter and the stdlib modules, will get
leaked into distutils. In order to avoid that, the PY_CORE_LDFLAGS
and PY_LDFLAGS_NODIST are introduced to keep those flags separated.
When using link time optimizations, the -flto flag is passed to
BASECFLAGS, which makes it propagate to distutils. Those flags
should be reserved for the interpreter and the stdlib extension
modules only, thus moving those flags to CFLAGS_NODIST.
Adds configure flags for msan and ubsan builds to make it easier to enable.
These also encode the detail that address sanitizer and memory sanitizer
should disable pymalloc.
Define MEMORY_SANITIZER when appropriate at build time and adds workarounds
to existing code to mark things as initialized where the sanitizer is otherwise unable to
determine that. This lets our build succeed under the memory sanitizer. not all tests
pass without sanitizer failures yet but we're in pretty good shape after this.
.o generated by clang in LTO mode actually are LLVM bitcode files, which
leads to a few errors during configure/build step:
- add lto flags to the BASECFLAGS instead of CFLAGS, as CFLAGS are used
to build autoconf test case, and some are not compatible with clang LTO
(they assume binary in the .o, not bitcode)
- force llvm-ar instead of ar, as ar is not aware of .o files generated
by clang -flto
It is unused.
<!--
Thanks for your contribution!
Please read this comment in its entirety. It's quite important.
# Pull Request title
It should be in the following format:
```
bpo-NNNN: Summary of the changes made
```
Where: bpo-NNNN refers to the issue number in the https://bugs.python.org.
Most PRs will require an issue number. Trivial changes, like fixing a typo, do not need an issue.
# Backport Pull Request title
If this is a backport PR (PR made against branches other than `master`),
please ensure that the PR title is in the following format:
```
[X.Y] <title from the original PR> (GH-NNNN)
```
Where: [X.Y] is the branch name, e.g. [3.6].
GH-NNNN refers to the PR number from `master`.
-->
Stefan Krah
Miss Islington (bot)
Pablo Galindo
Inada Naoki
Zackery Spytz
E. M. Bray
David Carlier
Victor Stinner
pxinwr
Ned Deily
xdegaye
Michael Felt
Benjamin Peterson
Inada Naoki
Neil Schemenauer
Jakub Kulík
Joannah Nanjekye
Gregory P. Smith
stratakis
serge-sans-paille
Bjorn Andersson