Commit Graph

327 Commits

Author SHA1 Message Date
Victor Stinner 472f794a33
bpo-18748: test_io: silence destructor errors (GH-12805) 2019-04-12 21:58:24 +02:00
Victor Stinner 44235041f3
bpo-18748: io.IOBase destructor now logs close() errors in dev mode (GH-12786)
In development mode (-X dev) and in debug build, the io.IOBase
destructor now logs close() exceptions. These exceptions are silent
by default in release mode.
2019-04-12 17:06:47 +02:00
Gregory P. Smith e5796c42c6
bpo-35214: Skip test_io tests that'd cause a huge malloc under msan (#11385)
* skip test_constructor under msan.

* fix the others as well.

* reuse existing related news entry.

* typo fix
2018-12-30 20:17:57 -08:00
Victor Stinner 05c9d31eb6
bpo-31731: Fix test_io.check_interrupted_write() (GH-11225)
Fix a race condition in check_interrupted_write() of test_io:
create directly the thread with SIGALRM signal blocked,
rather than blocking the signal later from the thread. Previously, it
was possible that the thread gets the signal before the signal is
blocked.
2018-12-18 23:52:39 +01:00
Zackery Spytz 842acaab13 bpo-35504: Fix segfaults and SystemErrors when deleting certain attrs. (GH-11175) 2018-12-17 16:52:45 +02:00
Christopher Thorne ac22f6aa98 bpo-33578: Add getstate/setstate for CJK codec (GH-6984)
This implements getstate and setstate for the cjkcodecs multibyte incremental encoders/decoders, primarily to fix issues with seek/tell.

The encoder getstate/setstate is slightly tricky as the "state" is pending bytes + MultibyteCodec_State but only an integer can be returned. The approach I've taken is to encode this data into a long, similar to how .tell() encodes a "cookie_type" as a long.


https://bugs.python.org/issue33578
2018-11-01 03:48:49 -07:00
Xiang Zhang b08746bfdf
bpo-35062: Fix parsing _io.IncrementalNewlineDecoder's *translate* argument. (GH-10217)
_io.IncrementalNewlineDecoder's initializer possibly assigns out-of-range
value to the bitwise struct field.
2018-10-31 19:49:16 +08:00
Alexey Izbyshev a2670565d8 bpo-32236: open() emits RuntimeWarning if buffering=1 for binary mode (GH-4842)
If buffering=1 is specified for open() in binary mode, it is silently
treated as buffering=-1 (i.e., the default buffer size).
Coupled with the fact that line buffering is always supported in Python 2,
such behavior caused several issues (e.g., bpo-10344, bpo-21332).

Warn that line buffering is not supported if open() is called with
binary mode and buffering=1.
2018-10-20 02:22:31 +02:00
Zackery Spytz 28f07364f0 bpo-34068: _io__IOBase_close_impl could call _PyObject_SetAttrId with an exception set (GH-8282) 2018-07-17 09:31:44 +03:00
Zackery Spytz 23db935bcf bpo-25862: Fix assertion failures in io.TextIOWrapper.tell(). (GH-3918) 2018-06-29 13:14:58 +03:00
Victor Stinner 937ee9e745
Revert "bpo-33671: Add support.MS_WINDOWS and support.MACOS (GH-7800)" (GH-7919)
This reverts commit 8fbbdf0c31.
2018-06-26 02:11:06 +02:00
Victor Stinner 8fbbdf0c31
bpo-33671: Add support.MS_WINDOWS and support.MACOS (GH-7800)
* Add support.MS_WINDOWS: True if Python is running on Microsoft Windows.
* Add support.MACOS: True if Python is running on Apple macOS.
* Replace support.is_android with support.ANDROID
* Replace support.is_jython with support.JYTHON
* Cleanup code to initialize unix_shell
2018-06-22 19:25:44 +02:00
Serhiy Storchaka e36837cb71 bpo-33760: Fix file leaks in test_io. (GH-7361) 2018-06-03 22:53:56 -04:00
Serhiy Storchaka b21d155f57
bpo-32964: Reuse a testing implementation of the path protocol in tests. (#5930) 2018-03-02 11:53:51 +02:00
Nitish Chandra 059f58ce93 bpo-32228: Reset raw_pos after unwinding the raw stream (#4858)
Ensure that ``truncate()`` preserves the file position (as reported by ``tell()``) after writes longer than the buffer size.
2018-01-28 17:00:09 +01:00
Victor Stinner 13ff24582c
bpo-32593: Drop FreeBSD 9 and older support (#5232)
Drop support of FreeBSD 9 and older.
2018-01-22 18:32:50 +01:00
INADA Naoki 507434fd50
bpo-15216: io: TextIOWrapper.reconfigure() accepts encoding, errors and newline (GH-2343) 2017-12-21 09:59:53 +09:00
Mike 53f7a7c281 bpo-32297: Few misspellings found in Python source code comments. (#4803)
* Fix multiple typos in code comments

* Add spacing in comments (test_logging.py, test_math.py)

* Fix spaces at the beginning of comments in test_logging.py
2017-12-14 13:04:53 +02:00
Victor Stinner 91106cd9ff
bpo-29240: PEP 540: Add a new UTF-8 Mode (#855)
* Add -X utf8 command line option, PYTHONUTF8 environment variable
  and a new sys.flags.utf8_mode flag.
* If the LC_CTYPE locale is "C" at startup: enable automatically the
  UTF-8 mode.
* Add _winapi.GetACP(). encodings._alias_mbcs() now calls
  _winapi.GetACP() to get the ANSI code page
* locale.getpreferredencoding() now returns 'UTF-8' in the UTF-8
  mode. As a side effect, open() now uses the UTF-8 encoding by
  default in this mode.
* Py_DecodeLocale() and Py_EncodeLocale() now use the UTF-8 encoding
  in the UTF-8 Mode.
* Update subprocess._args_from_interpreter_flags() to handle -X utf8
* Skip some tests relying on the current locale if the UTF-8 mode is
  enabled.
* Add test_utf8mode.py.
* _Py_DecodeUTF8_surrogateescape() gets a new optional parameter to
  return also the length (number of wide characters).
* pymain_get_global_config() and pymain_set_global_config() now
  always copy flag values, rather than only copying if the new value
  is greater than the old value.
2017-12-13 12:29:09 +01:00
Sanyam Khurana 1b74f9b77a bpo-22671: Clarify and test default read method implementations (#4568)
Original patch written by Martin Panter, enhanced by Sanyam Khurana.
2017-12-11 14:42:09 +01:00
benfogle 9703f092ab bpo-31976: Fix race condition when flushing a file is slow. (#4331) 2017-11-10 22:03:40 +01:00
Victor Stinner 8c663fd60e
Replace KB unit with KiB (#4293)
kB (*kilo* byte) unit means 1000 bytes, whereas KiB ("kibibyte")
means 1024 bytes. KB was misused: replace kB or KB with KiB when
appropriate.

Same change for MB and GB which become MiB and GiB.

Change the output of Tools/iobench/iobench.py.

Round also the size of the documentation from 5.5 MB to 5 MiB.
2017-11-08 14:44:44 -08:00
Victor Stinner 9abee722d4 bpo-31479: Always reset the signal alarm in tests (#3588)
* bpo-31479: Always reset the signal alarm in tests

Use "try: ... finally: signal.signal(0)" pattern to make sure that
tests don't "leak" a pending fatal signal alarm.

* Move two more alarm() calls into the try block

Fix also typo: replace signal.signal(0) with signal.alarm(0)

* Move another signal.alarm() into the try block
2017-09-19 09:36:54 -07:00
Antoine Pitrou a6a4dc816d bpo-31370: Remove support for threads-less builds (#3385)
* Remove Setup.config
* Always define WITH_THREAD for compatibility.
2017-09-07 18:56:24 +02:00
Oren Milman ba7d736521 bpo-31243: Fixed PyArg_ParseTuple failure checks. (#3171) 2017-08-29 11:58:27 +03:00
Oren Milman a5b4ea15b6 bpo-31271: Fix an assertion failure in io.TextIOWrapper.write. (#3201) 2017-08-25 21:14:54 +03:00
Oren Milman 1d1d3e9db8 bpo-28261: Fixed err msgs where PyArg_ParseTuple is used to parse normal tuples. (#3119) 2017-08-20 18:35:36 +03:00
Antoine Pitrou 3c2817b688 Fix bpo-30526: Add TextIOWrapper.reconfigure() and a TextIOWrapper.write_through attribute (#1922)
* Fix bpo-30526: Add TextIOWrapper.reconfigure()

* Apply Nick's improved wording

* Update Misc/NEWS
2017-06-03 12:32:28 +02:00
Victor Stinner 2a1aed04b0 bpo-30107: don't dump core on expected test_io crash (#1235)
test_io has two unit tests which trigger a deadlock:

* test_daemon_threads_shutdown_stdout_deadlock()
* test_daemon_threads_shutdown_stderr_deadlock()

These tests call Py_FatalError() if the expected bug is triggered
which calls abort(). Use test.support.SuppressCrashReport to prevent
the creation on a core dump, to fix the warning:

Warning -- files was modified by test_io
  Before: []
  After:  ['python.core']
2017-04-21 17:59:23 +02:00
Serhiy Storchaka bf623ae884 bpo-30061: Check if PyObject_Size()/PySequence_Size()/PyMapping_Size() (#1096)
raised an error.

Replace them with using concrete types API that never fails if appropriate.
2017-04-19 20:03:52 +03:00
Xiang Zhang 026435ce49 bpo-30068: add missing iter(self) in _io._IOBase.readlines when hint is present (#1130) 2017-04-15 12:47:28 +08:00
Serhiy Storchaka a5af6e1af7 bpo-25455: Fixed crashes in repr of recursive buffered file-like objects. (#514) 2017-03-19 19:25:29 +02:00
Xavier de Gaye ac05f88582 Issue #26926: Merge 3.6 2016-11-17 09:22:43 +01:00
Xavier de Gaye 877f036950 Issue #26926: Skip some test_io tests on platforms without large file support 2016-11-17 09:20:28 +01:00
Martin Panter ccb2c0e310 Issue #23214: Implement optional BufferedReader, BytesIO read1() argument 2016-10-20 23:48:14 +00:00
Serhiy Storchaka 5f1a5187f7 Use sequence repetition instead of bytes constructor with integer argument. 2016-09-11 14:41:02 +03:00
Steve Dower 6d5cf8a73e Fixes expected error when getting encoding while shutting down. 2016-09-09 09:21:01 -07:00
Steve Dower 4cf7e482a0 Fix expected error message in PyTextIOWrapperTest 2016-09-07 17:51:30 -07:00
Steve Dower fe8f4c9e87 Issue #27959: Prevent ImportError from escaping codec search function 2016-09-07 09:31:52 -07:00
Benjamin Peterson e2ffe29738 new and exciting shutdown error on windows 2016-09-07 08:54:35 -07:00
Serhiy Storchaka bae75cf3fe Issue #19527: Fixed tests with defined COUNT_ALLOCS. 2016-07-03 22:30:49 +03:00
Serhiy Storchaka a793037d80 Issue #19527: Fixed tests with defined COUNT_ALLOCS. 2016-07-03 22:27:26 +03:00
Brett Cannon c78ca1e044 Issue #27186: Update os.fspath()/PyOS_FSPath() to check the return
type of __fspath__().

As part of this change, also make sure that the pure Python
implementation of os.fspath() is tested.
2016-06-24 12:03:43 -07:00
Barry Warsaw 118598a072 Issue #27066: Fixed SystemError if a custom opener (for open()) returns a
negative number without setting an exception.
2016-06-08 17:54:43 -04:00
Barry Warsaw 480e28538d Issue #27066: Fixed SystemError if a custom opener (for open()) returns
a negative number without setting an exception.
2016-06-08 17:47:26 -04:00
Ethan Furman d62548afed issue27186: add open/io.open; patch by Jelle Zijlstra 2016-06-04 14:38:43 -07:00
Martin Panter c249221dfd Issue #20699: Merge io bytes-like fixes from 3.5 2016-05-28 01:07:08 +00:00
Martin Panter 6bb91f3b6e Issue #20699: Document that “io” methods accept bytes-like objects
This matches the usage of ZipFile and BufferedWriter. This still requires
return values to be bytes() objects.

Also document and test that the write() methods should only access their
argument before they return.
2016-05-28 00:41:57 +00:00
Martin Panter 0fc03186f7 Issue #22854: Merge test fix from 3.5 2016-03-31 21:06:06 +00:00
Martin Panter 3ee147ffbb Issue #22854: Fix logic for skipping test 2016-03-31 21:05:31 +00:00