On failure, _PyBytes_Resize() will deallocate the bytes object and set
"result" to NULL.
https://bugs.python.org/issue34824
(cherry picked from commit 365ad2ead5)
Co-authored-by: Zackery Spytz <zspytz@gmail.com>
Add SSLContext.post_handshake_auth and
SSLSocket.verify_client_post_handshake for TLS 1.3 post-handshake
authentication.
Signed-off-by: Christian Heimes <christian@python.org>q
https://bugs.python.org/issue34670.
(cherry picked from commit 9fb051f032)
Co-authored-by: Christian Heimes <christian@python.org>
https://bugs.python.org/issue34670
OpenSSL follows the convention that whenever you call a function, it
returns an error indicator value; and if this value is negative, then
you need to go look at the actual error code to see what happened.
Commit c6fd1c1c3a introduced a small mistake in
_ssl__SSLSocket_shutdown_impl: instead of checking whether the error
indicator was negative, it started checking whether the actual error
code was negative, and it turns out that the error codes are never
negative. So the effect was that 'unwrap()' lost the ability to raise
SSL errors.
https://bugs.python.org/issue34759
(cherry picked from commit c0da582b22)
Co-authored-by: Nathaniel J. Smith <njs@pobox.com>
Include ``openssl/dh.h`` header file to fix implicit function declaration of ``DH_free()``.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
(cherry picked from commit b3a271fc0c)
Co-authored-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The documentation for CERT_NONE, CERT_OPTIONAL, and CERT_REQUIRED were
misleading and partly wrong. It fails to explain that OpenSSL behaves
differently in client and server mode. Also OpenSSL does validate the
cert chain everytime. With SSL_VERIFY_NONE a validation error is not
fatal in client mode and does not request a client cert in server mode.
Also discourage people from using CERT_OPTIONAL in client mode.
(cherry picked from commit ef24b6c54d)
Co-authored-by: Christian Heimes <christian@python.org>
The ssl module now contains OP_NO_RENEGOTIATION constant, available with
OpenSSL 1.1.0h or 1.1.1.
Note, OpenSSL 1.1.0h hasn't been released yet.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 67c4801663)
Co-authored-by: Christian Heimes <christian@python.org>
Harden ssl module against LibreSSL CVE-2018-8970.
X509_VERIFY_PARAM_set1_host() is called with an explicit namelen. A new test
ensures that NULL bytes are not allowed.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit d02ac25ab0)
Co-authored-by: Christian Heimes <christian@python.org>
LibreSSL 2.7 introduced OpenSSL 1.1.0 API. The ssl module now detects
LibreSSL 2.7 and only provides API shims for OpenSSL < 1.1.0 and
LibreSSL < 2.7.
Documentation updates and fixes for failing tests will be provided in
another patch set.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 4ca0739c9d)
Co-authored-by: Christian Heimes <christian@python.org>
OpenSSL 1.1 has introduced a new API to set the minimum and maximum
supported protocol version. The API is easier to use than the old
OP_NO_TLS1 option flags, too.
Since OpenSSL has no call to set minimum version to highest supported,
the implementation emulate maximum_version = MINIMUM_SUPPORTED and
minimum_version = MAXIMUM_SUPPORTED by figuring out the minumum and
maximum supported version at compile time.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 698dde16f6)
Co-authored-by: Christian Heimes <christian@python.org>
* bpo-32947: OpenSSL 1.1.1-pre1 / TLS 1.3 fixes
Misc fixes and workarounds for compatibility with OpenSSL 1.1.1-pre1 and
TLS 1.3 support. With OpenSSL 1.1.1, Python negotiates TLS 1.3 by
default. Some test cases only apply to TLS 1.2. Other tests currently
fail because the threaded or async test servers stop after failure.
I'm going to address these issues when OpenSSL 1.1.1 reaches beta.
OpenSSL 1.1.1 has added a new option OP_ENABLE_MIDDLEBOX_COMPAT for TLS
1.3. The feature is enabled by default for maximum compatibility with
broken middle boxes. Users should be able to disable the hack and CPython's test suite needs
it to verify default options.
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 05d9fe32a1)
Co-authored-by: Christian Heimes <christian@python.org>
The ssl module now detects missing NPN support in LibreSSL.
Co-Authored-By: Bernard Spil <brnrd@FreeBSD.org>
Signed-off-by: Christian Heimes <christian@python.org>
(cherry picked from commit 6cdb7954b0)
Co-authored-by: Christian Heimes <christian@python.org>
* The SSLSocket is no longer implemented on top of SSLObject to
avoid an extra level of indirection.
* Owner and session are now handled in the internal constructor.
* _ssl._SSLSocket now uses the same method names as SSLSocket and
SSLObject.
* Channel binding type check is now handled in C code. Channel binding
is always available.
The patch also changes the signature of SSLObject.__init__(). In my
opinion it's fine. A SSLObject is not a user-constructable object.
SSLContext.wrap_bio() is the only valid factory.
(cherry picked from commit 141c5e8c24)
Co-authored-by: Christian Heimes <christian@python.org>
Previously, the ssl module stored international domain names (IDNs)
as U-labels. This is problematic for a number of reasons -- for
example, it made it impossible for users to use a different version
of IDNA than the one built into Python.
After this change, we always convert to A-labels as soon as possible,
and use them for all internal processing. In particular, server_hostname
attribute is now an A-label, and on the server side there's a new
sni_callback that receives the SNI servername as an A-label rather than
a U-label.
(cherry picked from commit 11a1493bc4)
Co-authored-by: Christian Heimes <christian@python.org>
Until now Python used a hard coded white list of default TLS cipher
suites. The old approach has multiple downsides. OpenSSL's default
selection was completely overruled. Python did neither benefit from new
cipher suites (ChaCha20, TLS 1.3 suites) nor blacklisted cipher suites.
For example we used to re-enable 3DES.
Python now defaults to OpenSSL DEFAULT cipher suite selection and black
lists all unwanted ciphers. Downstream vendors can override the default
cipher list with --with-ssl-default-suites.
Signed-off-by: Christian Heimes <christian@python.org>
bpo-31399: Let OpenSSL verify hostname and IP
The ssl module now uses OpenSSL's X509_VERIFY_PARAM_set1_host() and
X509_VERIFY_PARAM_set1_ip() API to verify hostname and IP addresses.
* Remove match_hostname calls
* Check for libssl with set1_host, libssl must provide X509_VERIFY_PARAM_set1_host()
* Add documentation for OpenSSL 1.0.2 requirement
* Don't support OpenSSL special mode with a leading dot, e.g. ".example.org" matches "www.example.org". It's not standard conform.
* Add hostname_checks_common_name
Signed-off-by: Christian Heimes <christian@python.org>
Add https://www.gnu.org/software/autoconf-archive/ax_check_openssl.html
to auto-detect compiler flags, linker flags and libraries to compile
OpenSSL extensions. The M4 macro uses pkg-config and falls back to
manual detection.
Add autoconf magic to detect usable X509_VERIFY_PARAM_set1_host()
and related functions.
Refactor setup.py to use new config vars to compile _ssl and _hashlib
modules.
Signed-off-by: Christian Heimes <christian@python.org>
Cast Py_buffer.len (Py_ssize_t, signed) to size_t (unsigned) to
prevent the following warning:
Modules/_ssl.c:3089:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
The SSL module now raises SSLCertVerificationError when OpenSSL fails to
verify the peer's certificate. The exception contains more information about
the error.
Original patch by Chi Hsuan Yen
Signed-off-by: Christian Heimes <christian@python.org>
* bpo-29136: Add TLS 1.3 support
TLS 1.3 introduces a new, distinct set of cipher suites. The TLS 1.3
cipher suites don't overlap with cipher suites from TLS 1.2 and earlier.
Since Python sets its own set of permitted ciphers, TLS 1.3 handshake
will fail as soon as OpenSSL 1.1.1 is released. Let's enable the common
AES-GCM and ChaCha20 suites.
Additionally the flag OP_NO_TLSv1_3 is added. It defaults to 0 (no op) with
OpenSSL prior to 1.1.1. This allows applications to opt-out from TLS 1.3
now.
Signed-off-by: Christian Heimes <christian@python.org>
SSLObject.version() now correctly returns None when handshake over BIO has
not been performed yet.
Signed-off-by: Christian Heimes <christian@python.org>
The ssl and hashlib modules now call OPENSSL_add_all_algorithms_noconf() on
OpenSSL < 1.1.0. The function detects CPU features and enables optimizations
on some CPU architectures such as POWER8. Patch is based on research from
Gustavo Serra Scalet.
Signed-off-by: Christian Heimes <christian@python.org>
* Change NPN detection:
Version breakdown, support disabled (pre-patch/post-patch):
- pre-1.0.1: OPENSSL_NPN_NEGOTIATED will not be defined -> False/False
- 1.0.1 and 1.0.2: OPENSSL_NPN_NEGOTIATED will not be defined ->
False/False
- 1.1.0+: OPENSSL_NPN_NEGOTIATED will be defined and
OPENSSL_NO_NEXTPROTONEG will be defined -> True/False
Version breakdown support enabled (pre-patch/post-patch):
- pre-1.0.1: OPENSSL_NPN_NEGOTIATED will not be defined -> False/False
- 1.0.1 and 1.0.2: OPENSSL_NPN_NEGOTIATED will be defined and
OPENSSL_NO_NEXTPROTONEG will not be defined -> True/True
- 1.1.0+: OPENSSL_NPN_NEGOTIATED will be defined and
OPENSSL_NO_NEXTPROTONEG will not be defined -> True/True
* Refine NPN guard:
- If NPN is disabled, but ALPN is available we need our callback
- Make clinic's ssl behave the same way
This created a working ssl module for me, with NPN disabled and ALPN
enabled for OpenSSL 1.1.0f.
Concerns to address:
The initial commit for NPN support into OpenSSL [1], had the
OPENSSL_NPN_* variables defined inside the OPENSSL_NO_NEXTPROTONEG
guard. The question is if that ever made it into a release.
This would need an ugly hack, something like:
#if defined(OPENSSL_NO_NEXTPROTONEG) && \
!defined(OPENSSL_NPN_NEGOTIATED)
# define OPENSSL_NPN_UNSUPPORTED 0
# define OPENSSL_NPN_NEGOTIATED 1
# define OPENSSL_NPN_NO_OVERLAP 2
#endif
[1] https://github.com/openssl/openssl/commit/68b33cc5c7
If pass a server_hostname= that fails IDNA decoding to SSLContext.wrap_socket or SSLContext.wrap_bio, then the SSLContext object had a spurious Py_DECREF called on it, eventually leading to segfaults.
* Simplify X.509 extension handling code
The previous implementation had grown organically over time, as OpenSSL's API evolved.
* Delete even more code
Drop handshake_done and peer_cert members from PySSLSocket struct. The
peer certificate can be acquired from *SSL directly.
SSL_get_peer_certificate() does not trigger any network activity.
Instead of manually tracking the handshake state, simply use
SSL_is_init_finished().
In combination these changes fix auto-handshake for non-blocking
MemoryBIO connections.
Signed-off-by: Christian Heimes <christian@python.org>
* Remove conditional on free of `dps`, since `dps` is now allocated for
all versions of OpenSSL
* Remove call to `x509_check_ca` since it was only used to cache
the `crldp` field of the certificate
CRL_DIST_POINTS_free is available in all supported versions of OpenSSL
(recent 0.9.8+) and LibreSSL.
* bpo-6532: Make the thread id an unsigned integer.
From C API side the type of results of PyThread_start_new_thread() and
PyThread_get_thread_ident(), the id parameter of
PyThreadState_SetAsyncExc(), and the thread_id field of PyThreadState
changed from "long" to "unsigned long".
* Restore a check in thread_get_ident().
Issue #28858: The change b9c9691c72c5 introduced a regression. It seems like
_PyObject_CallArg1() uses more stack memory than
PyObject_CallFunctionObjArgs().
Miss Islington (bot)
Christian Heimes
Semen Zhydenko
Victor Stinner
Steve Dower
Antoine Pitrou
Serhiy Storchaka
Melvyn Sopacua
INADA Naoki
Segev Finer
Chandan Kumar
Nathaniel J. Smith
Alex Gaynor
Olivier Vielpeau
Donald Stufft