* bpo-39040: Fix parsing of email headers with encoded-words inside a quoted string.
It is fairly common to find malformed mime headers (especially content-disposition
headers) where the parameter values, instead of being encoded to RFC
standards, are "encoded" by doing RFC 2047 "encoded word" encoding, and
then enclosing the whole thing in quotes. The processing of these malformed
headers was incorrectly leaving the spaces between encoded words in the decoded
text (whitespace between adjacent encoded words is supposed to be stripped on
decoding). This changeset fixes the encoded word processing inside quoted strings
(bare-quoted-string) to do correct RFC 2047 decoding by stripping that
whitespace.
(cherry picked from commit 21017ed904)
Co-authored-by: Abhilash Raj <maxking@users.noreply.github.com>
raw_data_manager (default for EmailPolicy, EmailMessage)
does correct wrapping of 'text' parts as long as the message contains
characters outside of 7bit US-ASCII set: base64 or qp
Content-Transfer-Encoding is applied if the lines would be too long
without it. It did not, however, do this for ascii-only text,
which could result in lines that were longer than
policy.max_line_length or even the rfc 998 maximum.
This changeset fixes the heuristic so that if lines are longer than
policy.max_line_length, it will always apply a
content-transfer-encoding so that the lines are wrapped correctly.
parse_message_id() was improperly using a token defined inside an exception
handler, which was raising `UnboundLocalError` on parsing an invalid value.
https://bugs.python.org/issue38698
* Check intersection of two sets explicitly
Comparing ``len(a) > ``len(a - b)`` is essentially looking for an
intersection between the two sets. If set ``b`` does not intersect ``a``
then ``len(a - b)`` will be equal to ``len(a)``. This logic is more
clearly expressed as ``a & b``.
* Change while/pop to a for-loop
Copying the list, then repeatedly popping the first element was
unnecessarily slow. I also cleaned up a couple other inefficiencies.
There's no need to unpack a tuple, then re-pack and append it. The list
can be created with the first element instead of empty. Secondly, the
``endswith`` method returns a bool, so there's no need for an if-
statement to set ``encoding`` to True or False.
* Use set.intersection to check for intersections
``a.intersection(b)`` method is more clear of purpose than ``not
a.isdisjoint(b)`` and avoids an unnecessary set construction that ``a &
set(b)`` performs.
* Use not isdisjoint instead of intersection
While it reads slightly worse, the isdisjoint method will stop when it
finds a counterexample and returns a bool, rather than looping over the
entire iterable and constructing a new set.
Fixes a case in which email._header_value_parser.get_unstructured hangs the system for some invalid headers. This covers the cases in which the header contains either:
- a case without trailing whitespace
- an invalid encoded word
https://bugs.python.org/issue37764
This fix should also be backported to 3.7 and 3.8
https://bugs.python.org/issue37764
Special characters in email address header display names are normally
put within double quotes. However, encoded words (=?charset?x?...?=) are
not allowed withing double quotes. When the header contains a word with
special characters and another word that must be encoded, the first one
must also be encoded.
In the next example, the display name in the From header is quoted and
therefore the comma is allowed; in the To header, the comma is not
within quotes and not encoded, which is not allowed and therefore
rejected by some mail servers.
From: "Foo Bar, France" <foo@example.com>
To: Foo Bar, =?utf-8?q?Espa=C3=B1a?= <foo@example.com>
https://bugs.python.org/issue37482
This should fix the IndexError trying to retrieve `DisplayName.display_name` and `DisplayName.value` when the `value` is basically an empty string.
https://bugs.python.org/issue32178
* bpo-37461: Fix infinite loop in parsing of specially crafted email headers.
Some crafted email header would cause the get_parameter method to run in an
infinite loop causing a DoS attack surface when parsing those headers. This
patch fixes that by making sure the DQUOTE character is handled to prevent
going into an infinite loop.
As far as I can tell, this infinite loop would be triggered if:
1. The value being folded contains a single word (no spaces) longer than
max_line_length
2. The max_line_length is shorter than the encoding's name + 9
characters.
bpo-36564: https://bugs.python.org/issue36564
* patched string index out of range error in get_word function of _header_value_parser.py and created tests in test__header_value_parser.py for CFWS.
* Raise HeaderParseError instead of continuing when parsing a word.
* bpo-33972: Fix EmailMessage.iter_attachments raising AttributeError.
When certain malformed messages have content-type set to 'mulitpart/*' but
still have a single part body, iter_attachments can raise AttributeError. This
patch fixes it by returning a None value instead when the body is single part.
* bpo-36520: reset the encoded word offset when starting a new
line during an email header folding operation
* 📜🤖 Added by blurb_it.
* bpo-36520: add an additional test case, and provide descriptive
comments for the test_folding_with_utf8_encoding_* tests
* bpo-36520: fix whitespace issue
* bpo-36520: changes per reviewer request -- remove extraneous
backslashes; add whitespace between terminating quotes and
line-continuation backslashes; use "bpo-" instead of
"issue #" in comments
* bpo-21315: Fix parsing of encoded words with missing leading ws.
Because of missing leading whitespace, encoded word would get parsed as
unstructured token. This patch fixes that by looking for encoded words when
splitting tokens with whitespace.
Missing trailing whitespace around encoded word now register a defect
instead.
Original patch suggestion by David R. Murray on bpo-21315.
* bpo-30835: email: Fix AttributeError when parsing invalid Content-Transfer-Encoding
Parsing an email containing a multipart Content-Type, along with a
Content-Transfer-Encoding containing an invalid (non-ASCII-decodable) byte
will fail. email.feedparser.FeedParser._parsegen() gets the header and
attempts to convert it to lowercase before comparing it with the accepted
encodings, but as the header contains an invalid byte, it's returned as a
Header object rather than a str.
Cast the Content-Transfer-Encoding header to a str to avoid this.
Found using the AFL fuzzer.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Donnellan <andrew@donnellan.id.au>
* Add email and NEWS entry for the bugfix.
* bpo-35805: Add parser for Message-ID header.
This parser is based on the definition of Identification Fields from RFC 5322
Sec 3.6.4.
This should also prevent folding of Message-ID header using RFC 2047 encoded
words and hence fix bpo-35805.
* Prevent folding of non-ascii message-id headers.
* Add fold method to MsgID token to prevent folding.
Two kind of mistakes:
1. Missed space. After concatenating there is no space between words.
2. Missed comma. Causes unintentional concatenating in a list of strings.
When attempting to base64-decode a payload of invalid length (1 mod 4),
properly recognize and handle it. The given data will be returned as-is,
i.e. not decoded, along with a new defect, InvalidBase64LengthDefect.
* Fix multiple typos in code comments
* Add spacing in comments (test_logging.py, test_math.py)
* Fix spaces at the beginning of comments in test_logging.py
The original algorithm tried to delegate the folding to the tokens so
that those tokens whose folding rules differed could specify the
differences. However, this resulted in a lot of duplicated code because
most of the rules were the same.
The new algorithm moves all folding logic into a set of functions
external to the token classes, but puts the information about which
tokens can be folded in which ways on the tokens...with the exception of
mime-parameters, which are a special case (which was not even
implemented in the old folder).
This algorithm can still probably be improved and hopefully simplified
somewhat.
Note that some of the test expectations are changed. I believe the
changes are toward more desirable and consistent behavior: in general
when (re) folding a line the canonical version of the tokens is
generated, rather than preserving errors or extra whitespace.
While there is not real bug in this case, using re.IGNORECASE without re.ASCII
leads unexpected behavior.
Instead of adding re.ASCII, this commit removes re.IGNORECASE flag because
it's easier and simpler.
This commit removes dead copy of the pattern in email.util module too.
While the pattern is same, it is compiled separately because it had different flags.
Leading whitespace was incorrectly dropped during folding of certain lines in the _header_value_parser's folding algorithm. This makes the whitespace handling code consistent.
It turns out we can't depend on email.message getting imported every place
message_factory is needed, so to avoid a circular import we need to special
case Policy.message_factory=None in the parser instead of using monkey
patching. I had a feeling that was a bad idea when I did it.
Miss Islington (bot)
Arkadiusz Hiler
Ashwin Ramaswami
Abhilash Raj
Claudiu Popa
Andrei Troie
Michael Selik
bsiem
Serhiy Storchaka
Min ho Kim
jpic
Paul Ganssle
websurfer5
Xtreak
Batuhan Taşkaya
Krzysztof Wojcik
Jens Troeger
Inada Naoki
Dong-hee Na
Tal Einat
Leo Arias
jayyyin
Mike
R. David Murray
Rohit Balasubramanian
Joel Hillacre
mircea-cosbuc
delirious-lettuce
Jon Dufresne
Steve Dower