Special characters in email address header display names are normally
put within double quotes. However, encoded words (=?charset?x?...?=) are
not allowed withing double quotes. When the header contains a word with
special characters and another word that must be encoded, the first one
must also be encoded.
In the next example, the display name in the From header is quoted and
therefore the comma is allowed; in the To header, the comma is not
within quotes and not encoded, which is not allowed and therefore
rejected by some mail servers.
From: "Foo Bar, France" <foo@example.com>
To: Foo Bar, =?utf-8?q?Espa=C3=B1a?= <foo@example.com>
https://bugs.python.org/issue37482
bpo-37834: Normalise handling of reparse points on Windows
* ntpath.realpath() and nt.stat() will traverse all supported reparse points (previously was mixed)
* nt.lstat() will let the OS traverse reparse points that are not name surrogates (previously would not traverse any reparse point)
* nt.[l]stat() will only set S_IFLNK for symlinks (previous behaviour)
* nt.readlink() will read destinations for symlinks and junction points only
bpo-1311: os.path.exists('nul') now returns True on Windows
* nt.stat('nul').st_mode is now S_IFCHR (previously was an error)
* Write a message when killing a worker process
* Put a timeout on the second popen.communicate() call
(after killing the process)
* Put a timeout on popen.wait() call
* Catch popen.kill() and popen.wait() exceptions
There are plenty of legitimate scripts in the tree that begin with a
`#!`, but also a few that seem to be marked executable by mistake.
Found them with this command -- it gets executable files known to Git,
filters to the ones that don't start with a `#!`, and then unmarks
them as executable:
$ git ls-files --stage \
| perl -lane 'print $F[3] if (!/^100644/)' \
| while read f; do
head -c2 "$f" | grep -qxF '#!' \
|| chmod a-x "$f"; \
done
Looking at the list by hand confirms that we didn't sweep up any
files that should have the executable bit after all. In particular
* The `.psd` files are images from Photoshop.
* The `.bat` files sure look like things that can be run.
But we have lots of other `.bat` files, and they don't have
this bit set, so it must not be needed for them.
Automerge-Triggered-By: @benjaminp
If this service had thoroughly vanished, we could just ignore the
test until someone gets around to either recreating such a service
or redesigning the test to somehow work locally. The
`support.transient_internet` mechanism catches the failure to
resolve the domain name, and skips the test.
But in fact the domain snakebite.net does still exist, as do its
nameservers -- and they can be quite slow to reply. As a result
this test can easily take 20-30s before it gets auto-skipped.
So, skip the test explicitly up front.
The fact that keyword names are strings is now part of the vectorcall and `METH_FASTCALL` protocols. The biggest concrete change is that `_PyStack_UnpackDict` now checks that and raises `TypeError` if not.
CC @markshannon @vstinner
https://bugs.python.org/issue37540
The documented definition was much broader than the real one:
there are tons of characters with general category "Other",
and we don't (and shouldn't) treat most of them as whitespace.
Rewrite the definition to agree with the comment on
_PyUnicode_IsWhitespace, and with the logic in makeunicodedata.py,
which is what generates that function and so ultimately governs.
Add suitable breadcrumbs so that a reader who wants to pin down
exactly what this definition means (what's a "bidirectional class"
of "B"?) can do so. The `unicodedata` module documentation is an
appropriate central place for our references to Unicode's own copious
documentation, so point there.
Also add to the isspace() test a thorough check that the
implementation agrees with the intended definition.
This file started life as a script, before conversion to a
`unittest` test file. Clear out some legacies of that conversion
that are a bit confusing about how it works.
Most notably, it's unlikely there's still a good reason to try
to recover from `unicodedata` failing to import -- as there was
when that logic was first added, when the module was very new.
So take that out entirely. Keep `self.db` working, though, to
avoid a noisy diff.
This should fix the IndexError trying to retrieve `DisplayName.display_name` and `DisplayName.value` when the `value` is basically an empty string.
https://bugs.python.org/issue32178
DeprecationWarning will continue to be emitted for invalid escape
sequences in string and bytes literals just as it did in 3.7.
SyntaxWarning may be emitted in the future. But per mailing list
discussion, we don't yet know when because we haven't settled on how to
do so in a non-disruptive manner.
(Applies 4c5b6bac24 to the master branch).
(This is https://github.com/python/cpython/pull/15142 for master/3.9)
https://bugs.python.org/issue32912
Automerge-Triggered-By: @gpshead
This fixes an inconsistency between the Python and C implementations of
the datetime module. The pure python version of the code was not
accepting offsets greater than 23:59 but less than 24:00. This is an
accidental legacy of the original implementation, which was put in place
before tzinfo allowed sub-minute time zone offsets.
GH-14878
Use warnings.filterwarnings() when importing the deprecated parser
module.
@pablogsal
https://bugs.python.org/issue37268
Automerge-Triggered-By: @pablogsal
There was a discrepancy between the Python and C implementations.
Add singletons ALWAYS_EQ, LARGEST and SMALLEST in test.support
to test mixed type comparison.
Imports now raise `TypeError` instead of `ValueError` for relative import failures. This makes things consistent between `builtins.__import__` and `importlib.__import__` as well as using a more natural import for the failure.
https://bugs.python.org/issue37444
Automerge-Triggered-By: @brettcannon
Previously pdb checked the $HOME environmental variable
to find the user .pdbrc. If $HOME is not set, the user
.pdbrc would not be found.
Change pdb to use `os.path.expanduser('~')` to determine
the user's home directory. Thus, if $HOME is not set (as
in tox or on Windows), os.path.expanduser('~') falls
back on other techniques for locating the user's home
directory.
This follows pip's implementation for loading .piprc.
Co-authored-by: Dan Lidral-Porter <dlp@aperiodic.org>
Support for RFCOMM, L2CAP, HCI, SCO is based on the BTPROTO_* macros
being defined. Winsock only supports RFCOMM, even though it has a
BTHPROTO_L2CAP macro. L2CAP support would build on windows, but not
necessarily work.
This also adds some basic unittests for constants (all of which existed
prior to this commit, just not on windows) and creating sockets.
pair: Nate Duarte <slacknate@gmail.com>
* bpo-37742: Return the root logger when logging.getLogger('root') is called.
* Added type check guard on logger name in logging.getLogger() and refined a test.
BPO -16970: Adding error message for invalid args
Applied the patch argparse-v2 patch issue 16970, ran patch check and the test suite, test_argparse with 0 errors
https://bugs.python.org/issue16970
This changeset increases the default size of the stack
for threads on macOS to the size of the stack
of the main thread and reenables the relevant
recursion test.
Expose the CAN_BCM SocketCAN constants used in the bcm_msg_head struct
flags (provided by <linux/can/bcm.h>) under the socket library.
This adds the following constants with a CAN_BCM prefix:
* SETTIMER
* STARTTIMER
* TX_COUNTEVT
* TX_ANNOUNCE
* TX_CP_CAN_ID
* RX_FILTER_ID
* RX_CHECK_DLC
* RX_NO_AUTOTIMER
* RX_ANNOUNCE_RESUME
* TX_RESET_MULTI_IDX
* RX_RTR_FRAME
* CAN_FD_FRAME
The CAN_FD_FRAME flag was introduced in the 4.8 kernel, while the other
ones were present since SocketCAN drivers were mainlined in 2.6.25. As
such, it is probably unnecessary to guard against these constants being
missing.
Mark some individual tests to skip when --pgo is used. The tests
marked increase the PGO task time significantly and likely don't
help improve optimization of the final executable.
Deprecate the parser module and add a deprecation warning triggered on import and a warning block in the documentation.
https://bugs.python.org/issue37268
Automerge-Triggered-By: @pablogsal
Steve Dower
bsiem
Anthony Sottile
Victor Stinner
Greg Price
Joannah Nanjekye
Eric V. Smith
Jeroen Demeyer
shireenrao
Hai Shi
Dong-hee Na
Raymond Hettinger
Abhilash Raj
Gregory P. Smith
Ngalim Siregar
Paul Monson
Pablo Galindo
Zackery Spytz
Serhiy Storchaka
aiudirog
Timothy Hopper
Greg Bowser
Vinay Sajip
tmblweed
Ronald Oussoren
karl ding
Min ho Kim
Neil Schemenauer
Jason R. Coombs