diff --git a/Doc/myformat.sty b/Doc/myformat.sty index 30be8a8696e..745ac4710d5 100644 --- a/Doc/myformat.sty +++ b/Doc/myformat.sty @@ -26,6 +26,10 @@ \parindent = 0mm \parskip = 2mm +\pagestyle{empty} % start this way; change for +\pagenumbering{roman} % ToC & chapters +\setcounter{secnumdepth}{1} + % old code font selections: \let\codefont=\tt \let\sectcodefont=\tt @@ -36,26 +40,59 @@ % Variable used by begin code command \newlength{\codewidth} +\newcommand{\examplevspace}{2mm} +\newcommand{\exampleindent}{1cm} % Command to start a code block (follow this by \begin{verbatim}) -\newcommand{\bcode}{ - % Calculate the text width for the minipage: - \setlength{\codewidth}{\linewidth} - \addtolength{\codewidth}{-\parindent} - % - \par - \vspace{3mm} - \indent - \begin{minipage}[t]{\codewidth} +\newcommand{\b@code}{% + \begingroup% + \setlength{\parindent}\exampleindent% + % Calculate the text width for the minipage: + \setlength{\codewidth}{\linewidth}% + \addtolength{\codewidth}{-\parindent}% + % + \par% + \vspace\examplevspace% + \indent% + \begin{minipage}[t]{\codewidth}% + \small% } % Command to end a code block (precede this by \end{verbatim}) -\newcommand{\ecode}{ - \end{minipage} - \vspace{3mm} - \par - \noindent +\newcommand{\e@code}{% + \end{minipage}% + \endgroup% } +\let\OldVerbatim=\verbatim +\let\OldEndVerbatim=\endverbatim +\renewcommand{\verbatim}{\b@code\OldVerbatim} +\renewcommand{\endverbatim}{\OldEndVerbatim\e@code} + +% Augment the sectioning commands used to get our own font family in +% place: +\newcommand{\HeaderFamily}{\sffamily} +\renewcommand{\section}{\@startsection {section}{1}{\z@}% + {-3.5ex \@plus -1ex \@minus -.2ex}% + {2.3ex \@plus.2ex}% + {\reset@font\Large\HeaderFamily}} +\renewcommand{\subsection}{\@startsection{subsection}{2}{\z@}% + {-3.25ex\@plus -1ex \@minus -.2ex}% + {1.5ex \@plus .2ex}% + {\reset@font\large\HeaderFamily}} +\renewcommand{\subsubsection}{\@startsection{subsubsection}{3}{\z@}% + {-3.25ex\@plus -1ex \@minus -.2ex}% + {1.5ex \@plus .2ex}% + {\reset@font\normalsize\HeaderFamily}} +\renewcommand{\paragraph}{\@startsection{paragraph}{4}{\z@}% + {3.25ex \@plus1ex \@minus.2ex}% + {-1em}% + {\reset@font\normalsize\HeaderFamily}} +\renewcommand{\subparagraph}{\@startsection{subparagraph}{5}{\parindent}% + {3.25ex \@plus1ex \@minus .2ex}% + {-1em}% + {\reset@font\normalsize\HeaderFamily}} + + % Underscore hack (only act like subscript operator if in math mode) % % The following is due to Mark Wooding (the old version didn't work with @@ -72,20 +109,23 @@ \expandafter\endgroup\next % -% This is the old hack, which didn't work with 2e. -% If you're still using Latex 2.09, you can give it a try if the above fails. +% This is the old hack, which didn't work with 2e. +% You should not need this since the rest of the documentation is now +% LaTeX2e-only. % %\def\_{\ifnum\fam=\ttfamily \char'137\else{\tt\char'137}\fi} %\catcode`\_=12 %\catcode`\_=\active\def_{\ifnum\fam=\ttfamily \char'137 \else{\tt\char'137}\fi} + %% Lots of index-entry generation support. -% Command to wrap around stuff that refers to function/module/attribute names -% in the index. Default behavior: like \code{}. To just keep the index -% entries in the roman font, uncomment the second definition to use instead; -% it matches O'Reilly style more. +% Command to wrap around stuff that refers to function / module / +% attribute names in the index. Default behavior: like \code{}. To +% just keep the index entries in the roman font, uncomment the second +% definition to use instead; it matches O'Reilly style more. +% \newcommand{\idxcode}[1]{\codefont{#1}} %\renewcommand{\idxcode}[1]{#1} @@ -103,7 +143,8 @@ \index{#4!#1 #2 #3} } -% Command to generate a reference to a function, statement, keyword, operator +% Command to generate a reference to a function, statement, keyword, +% operator. \newcommand{\stindex}[1]{\indexii{statement}{#1@{\idxcode{#1}}}} \newcommand{\opindex}[1]{\indexii{operator}{#1@{\idxcode{#1}}}} \newcommand{\exindex}[1]{\indexii{exception}{#1@{\idxcode{#1}}}} @@ -129,9 +170,9 @@ \newcommand{\stmodindex}[1]{\defmodindex{#1}{standard }} % Additional string for an index entry -\newcommand{\indexsubitem}{} -\newcommand{\setindexsubitem}[1]{\renewcommand{\indexsubitem}{#1}} -\newcommand{\ttindex}[1]{\index{#1@{\idxcode{#1}} \indexsubitem}} +\newcommand{\index@subitem}{} +\newcommand{\setindexsubitem}[1]{\renewcommand{\index@subitem}{#1}} +\newcommand{\ttindex}[1]{\index{#1@{\idxcode{#1}} \index@subitem}} % from user-level, fulllineitems should be called as an environment @@ -146,46 +187,46 @@ % \begin{cfuncdesc}{type}{name}{arglist} % ... description ... % \end{cfuncdesc} -\newcommand{\cfuncline}[3]{\item[\code{#1 #2(\varvars{#3})}]\ttindex{#2}} +\newcommand{\cfuncline}[3]{\item[\code{#1 \bfcode{#2}(\varvars{#3})}]\ttindex{#2}} \newcommand{\cfuncdesc}[3]{\fulllineitems\cfuncline{#1}{#2}{#3}} \let\endcfuncdesc\endfulllineitems -\newcommand{\cvarline}[2]{\item[\code{#1 #2}]\ttindex{#2}} +\newcommand{\cvarline}[2]{\item[\code{#1 \bfcode{#2}}]\ttindex{#2}} \newcommand{\cvardesc}[2]{\fulllineitems\cvarline{#1}{#2}} \let\endcvardesc\endfulllineitems -\newcommand{\ctypeline}[1]{\item[\code{#1}]\ttindex{#1}} +\newcommand{\ctypeline}[1]{\item[\bfcode{#1}]\ttindex{#1}} \newcommand{\ctypedesc}[1]{\fulllineitems\ctypeline{#1}} \let\endctypedesc\endfulllineitems % funcdesc should be called as an \begin{funcdesc} ... \end{funcdesc} -\newcommand{\funcline}[2]{\item[\code{#1(\varvars{#2})}]\ttindex{#1}} +\newcommand{\funcline}[2]{\item[\code{\bfcode{#1}(\varvars{#2})}]\ttindex{#1}} \newcommand{\funcdesc}[2]{\fulllineitems\funcline{#1}{#2}} \let\endfuncdesc\endfulllineitems -\newcommand{\optional}[1]{{\textnormal{\Large[}}{#1}\hspace{0.5mm}{\textnormal{\Large]}} } +\newcommand{\optional}[1]{{\textnormal{\Large[}}{#1}\hspace{0.5mm}{\textnormal{\Large]}}} % same for excdesc -\newcommand{\excline}[1]{\item[\code{#1}]\ttindex{#1}} +\newcommand{\excline}[1]{\item[\bfcode{#1}]\ttindex{#1}} \newcommand{\excdesc}[1]{\fulllineitems\excline{#1}} \let\endexcdesc\endfulllineitems % same for datadesc -\newcommand{\dataline}[1]{\item[\code{#1}]\ttindex{#1}} +\newcommand{\dataline}[1]{\item[\bfcode{#1}]\ttindex{#1}} \newcommand{\datadesc}[1]{\fulllineitems\dataline{#1}} \let\enddatadesc\endfulllineitems % opcodedesc should be called as an \begin{opcodedesc} ... \end{opcodedesc} -\newcommand{\opcodeline}[2]{\item[\code{#1\quad\varvars{#2}}]\ttindex{#1}} +\newcommand{\opcodeline}[2]{\item[\bfcode{#1}\quad\var{#2}]} \newcommand{\opcodedesc}[2]{\fulllineitems\opcodeline{#1}{#2}} \let\endopcodedesc\endfulllineitems \let\nodename=\label -%% For these commands, use \command{} to get the typography right, not -%% {\command}. This works better with the texinfo translation. +% For these commands, use \command{} to get the typography right, not +% {\command}. This works better with the texinfo translation. \newcommand{\ABC}{{\sc abc}} \newcommand{\UNIX}{{\sc Unix}} \newcommand{\POSIX}{POSIX} @@ -199,29 +240,33 @@ \newcommand{\code}[1]{{\@vobeyspaces\@noligs\def\{{\char`\{}\def\}{\char`\}}\def\~{\char`\~}\def\^{\char`\^}\def\e{\char`\\}\def\${\char`\$}\def\#{\char`\#}\def\&{\char`\&}\def\%{\char`\%}% \mbox{\codefont{#1}}}} +\newcommand{\bfcode}[1]{\code{\bfseries#1}} %bold-faced code font \newcommand{\kbd}[1]{\mbox{\tt #1}} \newcommand{\key}[1]{\mbox{\tt #1}} \newcommand{\samp}[1]{\mbox{`\code{#1}'}} -% This weird definition of \var{} allows it to always appear in roman italics, -% and won't get funky in code fragments when we play around with fonts. -\newcommand{\var}[1]{\mbox{\textrm{\textit{#1\/}}}} +% This weird definition of \var{} allows it to always appear in roman +% italics, and won't get funky in code fragments when we play around +% with fonts. +\newcommand{\var}[1]{\mbox{\normalsize\textrm{\textit{#1\/}}}} \newcommand{\dfn}[1]{{\em #1\/}} \renewcommand{\emph}[1]{{\em #1\/}} \newcommand{\strong}[1]{{\bf #1}} % let's experiment with a new font: -\newcommand{\file}[1]{\mbox{`\textsf{#1}'}} +\newcommand{\file}[1]{\mbox{`\small\textsf{#1}'}} +\newcommand{\url}[1]{\mbox{\small\textsf{#1}}} +\let\email=\url \newcommand{\varvars}[1]{{\def\,{\/{\char`\,}}\var{#1}}} \newif\iftexi\texifalse \newif\iflatex\latextrue -% Proposed new macros: These should be used for all references to identifiers -% which are used to refer to instances of specific language constructs. See -% the names for specific semantic assignments. +% These should be used for all references to identifiers which are +% used to refer to instances of specific language constructs. See the +% names for specific semantic assignments. % -% For now, don't do anything really fancy with them; just use them as logical -% markup. This might change in the future. +% For now, don't do anything really fancy with them; just use them as +% logical markup. This might change in the future. % \let\module=\code \let\keyword=\code @@ -236,8 +281,7 @@ \newcommand{\manpage}[2]{{\emph{#1}(#2)}} \newcommand{\rfc}[1]{RFC #1\index{RFC!RFC #1}} -\let\email=\code -\let\url=\code +\newcommand{\program}[1]{\strong{#1}} \newenvironment{tableii}[4]{\begin{center}\def\lineii##1##2{\csname#2\endcsname{##1}&##2\\}\begin{tabular}{#1}\hline#3\\ @@ -255,16 +299,16 @@ % Sample usage: % \begin{seealso} % \seemodule{rand}{Uniform random number generator}; % Module xref -% \seetext{{\em Encyclopedia Britannica}}. % Ref to a book +% \seetext{\emph{Encyclopedia Britannica}}. % Ref to a book % \end{seealso} -\newenvironment{seealso}[0]{{\bf See Also:}\par}{\par} +\newenvironment{seealso}[0]{\strong{See Also:}\par}{\par} \newcommand{\seemodule}[2]{\ref{module-#1}: \module{#1}\quad(#2)} \newcommand{\seetext}[1]{\par{#1}} -% Fix the theindex environment to add an entry to the Table of Contents; -% this is much nicer than just having to jump to the end of the book and -% flip around, especially with multiple indexes. +% Fix the theindex environment to add an entry to the Table of +% Contents; this is much nicer than just having to jump to the end of +% the book and flip around, especially with multiple indexes. % \let\OldTheindex=\theindex \renewcommand{\theindex}{% @@ -287,8 +331,8 @@ \OldEndAbstract } -% \mytableofcontents wraps the \tableofcontents macro with all the magic to -% get the spacing right and have the right number of pages if the 'openright' +% This wraps the \tableofcontents macro with all the magic to get the +% spacing right and have the right number of pages if the 'openright' % option has been used. This eliminates a fair amount of crud in the % individual document files. % @@ -308,36 +352,40 @@ \fi% }% \pagebreak% + \pagenumbering{arabic}% } -% Allow the release number to be specified independently of the \date{}. This -% allows the date to reflect the document's date and release to specify the -% Python release that is documented. +% Allow the release number to be specified independently of the +% \date{}. This allows the date to reflect the document's date and +% release to specify the Python release that is documented. +% \newcommand{\@release}{} \newcommand{\version}{} \newcommand{\releasename}{Release} \newcommand{\release}[1]{% \renewcommand{\@release}{\releasename\space\version}% - \renewcommand{\version}{#1}% -} + \renewcommand{\version}{#1}} -% Allow specification of the author's address separately from the author's -% name. This can be used to format them differently, which is a good thing. +% Allow specification of the author's address separately from the +% author's name. This can be used to format them differently, which +% is a good thing. +% \newcommand{\@authoraddress}{} \newcommand{\authoraddress}[1]{\renewcommand{\@authoraddress}{#1}} -% Change the title page to look a bit better, and fit in with the fncychap -% ``Bjarne'' style a bit better. +% Change the title page to look a bit better, and fit in with the +% fncychap ``Bjarne'' style a bit better. +% \renewcommand{\maketitle}{\begin{titlepage}% \let\footnotesize\small \let\footnoterule\relax \@ifundefined{ChTitleVar}{}{% \mghrulefill{\RW}}% \begin{flushright}% - {\huge \@title \par}% - {\em\LARGE \@release \par} + {\rm\Huge\HeaderFamily \@title \par}% + {\em\LARGE\HeaderFamily \@release \par} \vfill - {\LARGE \@author \par} + {\LARGE\HeaderFamily \@author \par} \vfill\vfill {\large \@date \par @@ -352,12 +400,17 @@ \gdef\@thanks{}\gdef\@author{}\gdef\@title{} } -% ``minitoc'' support; works fairly well but not all chapters do well with it. -% Has some weird side effects that I haven't tracked down; don't use it for -% real at this time. +% ``minitoc'' support; works fairly well but not all chapters do well +% with it. Has some weird side effects that I haven't tracked down; +% don't use it for real at this time. % -% To enable, uncomment the following line only: +% To enable, uncomment the following line only (don't do it!): %\RequirePackage{minitoc} +% +% Maybe this should all be removed. But I think something like this +% would be really nice if it can be integrated with the ``list of +% modules'' at the top of module-documentation chapters. But it might +% require a completely new environment, perhaps based on {list}. % Leave the rest as-is: \newif\if@minitocprinted @@ -401,12 +454,14 @@ \typeout{Including mini Tables of Contents in each chapter.} } -% This sets up the fancy chapter headings that make the documents look at -% least a little better than the usual LaTeX output. +% This sets up the fancy chapter headings that make the documents look +% at least a little better than the usual LaTeX output. % \RequirePackage[Bjarne]{fncychap} \@ifundefined{ChTitleVar}{}{ - \ChTitleVar{\raggedleft \rm\Huge} + \ChNameVar{\raggedleft\normalsize\HeaderFamily} + \ChNumVar{\raggedleft \bfseries\Large\HeaderFamily} + \ChTitleVar{\raggedleft \rm\Huge\HeaderFamily} % This creates chapter heads without the leading \vspace*{}: \def\@makechapterhead#1{% {\parindent \z@ \raggedright \normalfont