diff --git a/Doc/library/os.rst b/Doc/library/os.rst index 9cb34deb042..b8f57f55eb4 100644 --- a/Doc/library/os.rst +++ b/Doc/library/os.rst @@ -1102,6 +1102,45 @@ or `the MSDN `_ on Windo .. versionadded:: 3.3 +.. function:: pwritev(fd, buffers, offset, flags=0) + + Combines the functionality of :func:`os.writev` and :func:`os.pwrite`. It + writes the contents of *buffers* to file descriptor *fd* at offset *offset*. + *buffers* must be a sequence of :term:`bytes-like objects `. + Buffers are processed in array order. Entire contents of first buffer is written + before proceeding to second, and so on. The operating system may set a limit + (sysconf() value SC_IOV_MAX) on the number of buffers that can be used. + :func:`~os.pwritev` writes the contents of each object to the file descriptor + and returns the total number of bytes written. + + The *flags* argument contains a bitwise OR of zero or more of the following + flags: + + - RWF_DSYNC + - RWF_SYNC + + Using non-zero flags requires Linux 4.7 or newer. + + Availability: Linux (version 2.6.30), FreeBSD 6.0 and newer, + OpenBSD (version 2.7 and newer). + + .. versionadded:: 3.7 + +.. data:: RWF_DSYNC (since Linux 4.7) + Provide a per-write equivalent of the O_DSYNC open(2) flag. This flag + is meaningful only for pwritev2(), and its effect applies only to the + data range written by the system call. + + .. versionadded:: 3.7 + +.. data:: RWF_SYNC (since Linux 4.7) + Provide a per-write equivalent of the O_SYNC open(2) flag. This flag is + meaningful only for pwritev2(), and its effect applies only to the data + range written by the system call. + + .. versionadded:: 3.7 + + .. function:: read(fd, n) Read at most *n* bytes from file descriptor *fd*. Return a bytestring containing the @@ -1196,6 +1235,51 @@ or `the MSDN `_ on Windo .. versionadded:: 3.3 +.. function:: preadv(fd, buffers, offset, flags=0) + + Combines the functionality of :func:`os.readv` and :func:`os.pread`. It + reads from a file descriptor *fd* into a number of mutable :term:`bytes-like + objects ` *buffers*. As :func:`os.readv`, it will transfer + data into each buffer until it is full and then move on to the next buffer in + the sequence to hold the rest of the data. Its fourth argument, *offset*, + specifies the file offset at which the input operation is to be performed. + :func:`~os.preadv` return the total number of bytes read (which can be less than + the total capacity of all the objects). + + The flags argument contains a bitwise OR of zero or more of the following + flags: + + - RWF_HIPRI + - RWF_NOWAIT + + Using non-zero flags requires Linux 4.6 or newer. + + Availability: Linux (version 2.6.30), FreeBSD 6.0 and newer, + OpenBSD (version 2.7 and newer). + + .. versionadded:: 3.7 + + +.. data:: RWF_HIPRI (since Linux 4.6) + High priority read/write. Allows block-based filesystems to use polling + of the device, which provides lower latency, but may use additional + resources. (Currently, this feature is usable only on a file descriptor + opened using the O_DIRECT flag.) + + .. versionadded:: 3.7 + + +.. data:: RWF_NOWAIT (since Linux 4.14) + Do not wait for data which is not immediately available. If this flag + is specified, the preadv2() system call will return instantly + if it would have to read data from the backing storage or wait for a lock. + If some data was successfully read, it will return the number of bytes + read. If no bytes were read, it will return -1 and set errno to EAGAIN. + Currently, this flag is meaningful only for preadv2(). + + .. versionadded:: 3.7 + + .. function:: tcgetpgrp(fd) Return the process group associated with the terminal given by *fd* (an open diff --git a/Lib/test/test_posix.py b/Lib/test/test_posix.py index 6c504063179..a7f3d34f66d 100644 --- a/Lib/test/test_posix.py +++ b/Lib/test/test_posix.py @@ -272,6 +272,28 @@ class PosixTester(unittest.TestCase): finally: os.close(fd) + @unittest.skipUnless(hasattr(posix, 'preadv'), "test needs posix.preadv()") + def test_preadv(self): + fd = os.open(support.TESTFN, os.O_RDWR | os.O_CREAT) + try: + os.write(fd, b'test1tt2t3t5t6t6t8') + buf = [bytearray(i) for i in [5, 3, 2]] + self.assertEqual(posix.preadv(fd, buf, 3), 10) + self.assertEqual([b't1tt2', b't3t', b'5t'], list(buf)) + finally: + os.close(fd) + + @unittest.skipUnless(hasattr(posix, 'RWF_HIPRI'), "test needs posix.RWF_HIPRI") + def test_preadv_flags(self): + fd = os.open(support.TESTFN, os.O_RDWR | os.O_CREAT) + try: + os.write(fd, b'test1tt2t3t5t6t6t8') + buf = [bytearray(i) for i in [5, 3, 2]] + self.assertEqual(posix.preadv(fd, buf, 3, os.RWF_HIPRI), 10) + self.assertEqual([b't1tt2', b't3t', b'5t'], list(buf)) + finally: + os.close(fd) + @unittest.skipUnless(hasattr(posix, 'pwrite'), "test needs posix.pwrite()") def test_pwrite(self): fd = os.open(support.TESTFN, os.O_RDWR | os.O_CREAT) @@ -283,6 +305,34 @@ class PosixTester(unittest.TestCase): finally: os.close(fd) + @unittest.skipUnless(hasattr(posix, 'pwritev'), "test needs posix.pwritev()") + def test_pwritev(self): + fd = os.open(support.TESTFN, os.O_RDWR | os.O_CREAT) + try: + os.write(fd, b"xx") + os.lseek(fd, 0, os.SEEK_SET) + n = os.pwritev(fd, [b'test1', b'tt2', b't3'], 2) + self.assertEqual(n, 10) + + os.lseek(fd, 0, os.SEEK_SET) + self.assertEqual(b'xxtest1tt2t3', posix.read(fd, 100)) + finally: + os.close(fd) + + @unittest.skipUnless(hasattr(posix, 'os.RWF_SYNC'), "test needs os.RWF_SYNC") + def test_pwritev_flags(self): + fd = os.open(support.TESTFN, os.O_RDWR | os.O_CREAT) + try: + os.write(fd,b"xx") + os.lseek(fd, 0, os.SEEK_SET) + n = os.pwritev(fd, [b'test1', b'tt2', b't3'], 2, os.RWF_SYNC) + self.assertEqual(n, 10) + + os.lseek(fd, 0, os.SEEK_SET) + self.assertEqual(b'xxtest1tt2', posix.read(fd, 100)) + finally: + os.close(fd) + @unittest.skipUnless(hasattr(posix, 'posix_fallocate'), "test needs posix.posix_fallocate()") def test_posix_fallocate(self): diff --git a/Misc/NEWS.d/next/Core and Builtins/2018-01-19-01-54-22.bpo-31368.kzKqUR.rst b/Misc/NEWS.d/next/Core and Builtins/2018-01-19-01-54-22.bpo-31368.kzKqUR.rst new file mode 100644 index 00000000000..e13a58bb2c2 --- /dev/null +++ b/Misc/NEWS.d/next/Core and Builtins/2018-01-19-01-54-22.bpo-31368.kzKqUR.rst @@ -0,0 +1 @@ +Expose preadv and pwritev system calls in the os module. Patch by Pablo Galindo diff --git a/Modules/clinic/posixmodule.c.h b/Modules/clinic/posixmodule.c.h index 6f4c028e7ef..f432437e99e 100644 --- a/Modules/clinic/posixmodule.c.h +++ b/Modules/clinic/posixmodule.c.h @@ -3705,6 +3705,61 @@ exit: #endif /* defined(HAVE_PREAD) */ +#if (defined(HAVE_PREADV) || defined (HAVE_PREADV2)) + +PyDoc_STRVAR(os_preadv__doc__, +"preadv($module, fd, buffers, offset, flags=0, /)\n" +"--\n" +"\n" +"Reads from a file descriptor into a number of mutable bytes-like objects.\n" +"\n" +"Combines the functionality of readv() and pread(). As readv(), it will\n" +"transfer data into each buffer until it is full and then move on to the next\n" +"buffer in the sequence to hold the rest of the data. Its fourth argument,\n" +"specifies the file offset at which the input operation is to be performed. It\n" +"will return the total number of bytes read (which can be less than the total\n" +"capacity of all the objects).\n" +"\n" +"The flags argument contains a bitwise OR of zero or more of the following flags:\n" +"\n" +"- RWF_HIPRI\n" +"- RWF_NOWAIT\n" +"\n" +"Using non-zero flags requires Linux 4.6 or newer."); + +#define OS_PREADV_METHODDEF \ + {"preadv", (PyCFunction)os_preadv, METH_FASTCALL, os_preadv__doc__}, + +static Py_ssize_t +os_preadv_impl(PyObject *module, int fd, PyObject *buffers, Py_off_t offset, + int flags); + +static PyObject * +os_preadv(PyObject *module, PyObject *const *args, Py_ssize_t nargs) +{ + PyObject *return_value = NULL; + int fd; + PyObject *buffers; + Py_off_t offset; + int flags = 0; + Py_ssize_t _return_value; + + if (!_PyArg_ParseStack(args, nargs, "iOO&|i:preadv", + &fd, &buffers, Py_off_t_converter, &offset, &flags)) { + goto exit; + } + _return_value = os_preadv_impl(module, fd, buffers, offset, flags); + if ((_return_value == -1) && PyErr_Occurred()) { + goto exit; + } + return_value = PyLong_FromSsize_t(_return_value); + +exit: + return return_value; +} + +#endif /* (defined(HAVE_PREADV) || defined (HAVE_PREADV2)) */ + PyDoc_STRVAR(os_write__doc__, "write($module, fd, data, /)\n" "--\n" @@ -3963,6 +4018,61 @@ exit: #endif /* defined(HAVE_PWRITE) */ +#if (defined(HAVE_PWRITEV) || defined (HAVE_PWRITEV2)) + +PyDoc_STRVAR(os_pwritev__doc__, +"pwritev($module, fd, buffers, offset, flags=0, /)\n" +"--\n" +"\n" +"Writes the contents of bytes-like objects to a file descriptor at a given offset.\n" +"\n" +"Combines the functionality of writev() and pwrite(). All buffers must be a sequence\n" +"of bytes-like objects. Buffers are processed in array order. Entire contents of first\n" +"buffer is written before proceeding to second, and so on. The operating system may\n" +"set a limit (sysconf() value SC_IOV_MAX) on the number of buffers that can be used.\n" +"This function writes the contents of each object to the file descriptor and returns\n" +"the total number of bytes written.\n" +"\n" +"The flags argument contains a bitwise OR of zero or more of the following flags:\n" +"\n" +"- RWF_DSYNC\n" +"- RWF_SYNC\n" +"\n" +"Using non-zero flags requires Linux 4.7 or newer."); + +#define OS_PWRITEV_METHODDEF \ + {"pwritev", (PyCFunction)os_pwritev, METH_FASTCALL, os_pwritev__doc__}, + +static Py_ssize_t +os_pwritev_impl(PyObject *module, int fd, PyObject *buffers, Py_off_t offset, + int flags); + +static PyObject * +os_pwritev(PyObject *module, PyObject *const *args, Py_ssize_t nargs) +{ + PyObject *return_value = NULL; + int fd; + PyObject *buffers; + Py_off_t offset; + int flags = 0; + Py_ssize_t _return_value; + + if (!_PyArg_ParseStack(args, nargs, "iOO&|i:pwritev", + &fd, &buffers, Py_off_t_converter, &offset, &flags)) { + goto exit; + } + _return_value = os_pwritev_impl(module, fd, buffers, offset, flags); + if ((_return_value == -1) && PyErr_Occurred()) { + goto exit; + } + return_value = PyLong_FromSsize_t(_return_value); + +exit: + return return_value; +} + +#endif /* (defined(HAVE_PWRITEV) || defined (HAVE_PWRITEV2)) */ + #if defined(HAVE_MKFIFO) PyDoc_STRVAR(os_mkfifo__doc__, @@ -6239,6 +6349,10 @@ exit: #define OS_PREAD_METHODDEF #endif /* !defined(OS_PREAD_METHODDEF) */ +#ifndef OS_PREADV_METHODDEF + #define OS_PREADV_METHODDEF +#endif /* !defined(OS_PREADV_METHODDEF) */ + #ifndef OS_PIPE_METHODDEF #define OS_PIPE_METHODDEF #endif /* !defined(OS_PIPE_METHODDEF) */ @@ -6255,6 +6369,10 @@ exit: #define OS_PWRITE_METHODDEF #endif /* !defined(OS_PWRITE_METHODDEF) */ +#ifndef OS_PWRITEV_METHODDEF + #define OS_PWRITEV_METHODDEF +#endif /* !defined(OS_PWRITEV_METHODDEF) */ + #ifndef OS_MKFIFO_METHODDEF #define OS_MKFIFO_METHODDEF #endif /* !defined(OS_MKFIFO_METHODDEF) */ @@ -6410,4 +6528,4 @@ exit: #ifndef OS_GETRANDOM_METHODDEF #define OS_GETRANDOM_METHODDEF #endif /* !defined(OS_GETRANDOM_METHODDEF) */ -/*[clinic end generated code: output=6345053cd5992caf input=a9049054013a1b77]*/ +/*[clinic end generated code: output=06ace805893aa10c input=a9049054013a1b77]*/ diff --git a/Modules/posixmodule.c b/Modules/posixmodule.c index b0e48dabbd5..a1a38ebda38 100644 --- a/Modules/posixmodule.c +++ b/Modules/posixmodule.c @@ -8163,6 +8163,94 @@ os_pread_impl(PyObject *module, int fd, int length, Py_off_t offset) } #endif /* HAVE_PREAD */ +#if defined(HAVE_PREADV) || defined (HAVE_PREADV2) +/*[clinic input] +os.preadv -> Py_ssize_t + + fd: int + buffers: object + offset: Py_off_t + flags: int = 0 + / + +Reads from a file descriptor into a number of mutable bytes-like objects. + +Combines the functionality of readv() and pread(). As readv(), it will +transfer data into each buffer until it is full and then move on to the next +buffer in the sequence to hold the rest of the data. Its fourth argument, +specifies the file offset at which the input operation is to be performed. It +will return the total number of bytes read (which can be less than the total +capacity of all the objects). + +The flags argument contains a bitwise OR of zero or more of the following flags: + +- RWF_HIPRI +- RWF_NOWAIT + +Using non-zero flags requires Linux 4.6 or newer. +[clinic start generated code]*/ + +static Py_ssize_t +os_preadv_impl(PyObject *module, int fd, PyObject *buffers, Py_off_t offset, + int flags) +/*[clinic end generated code: output=26fc9c6e58e7ada5 input=4173919dc1f7ed99]*/ +{ + Py_ssize_t cnt, n; + int async_err = 0; + struct iovec *iov; + Py_buffer *buf; + + if (!PySequence_Check(buffers)) { + PyErr_SetString(PyExc_TypeError, + "preadv2() arg 2 must be a sequence"); + return -1; + } + + cnt = PySequence_Size(buffers); + if (cnt < 0) { + return -1; + } + +#ifndef HAVE_PREADV2 + if(flags != 0) { + argument_unavailable_error("preadv2", "flags"); + return -1; + } +#endif + + if (iov_setup(&iov, &buf, buffers, cnt, PyBUF_WRITABLE) < 0) { + return -1; + } +#ifdef HAVE_PREADV2 + do { + Py_BEGIN_ALLOW_THREADS + _Py_BEGIN_SUPPRESS_IPH + n = preadv2(fd, iov, cnt, offset, flags); + _Py_END_SUPPRESS_IPH + Py_END_ALLOW_THREADS + } while (n < 0 && errno == EINTR && !(async_err = PyErr_CheckSignals())); +#else + do { + Py_BEGIN_ALLOW_THREADS + _Py_BEGIN_SUPPRESS_IPH + n = preadv(fd, iov, cnt, offset); + _Py_END_SUPPRESS_IPH + Py_END_ALLOW_THREADS + } while (n < 0 && errno == EINTR && !(async_err = PyErr_CheckSignals())); +#endif + + iov_cleanup(iov, buf, cnt); + if (n < 0) { + if (!async_err) { + posix_error(); + } + return -1; + } + + return n; +} +#endif /* HAVE_PREADV */ + /*[clinic input] os.write -> Py_ssize_t @@ -8613,6 +8701,97 @@ os_pwrite_impl(PyObject *module, int fd, Py_buffer *buffer, Py_off_t offset) } #endif /* HAVE_PWRITE */ +#if defined(HAVE_PWRITEV) || defined (HAVE_PWRITEV2) +/*[clinic input] +os.pwritev -> Py_ssize_t + + fd: int + buffers: object + offset: Py_off_t + flags: int = 0 + / + +Writes the contents of bytes-like objects to a file descriptor at a given offset. + +Combines the functionality of writev() and pwrite(). All buffers must be a sequence +of bytes-like objects. Buffers are processed in array order. Entire contents of first +buffer is written before proceeding to second, and so on. The operating system may +set a limit (sysconf() value SC_IOV_MAX) on the number of buffers that can be used. +This function writes the contents of each object to the file descriptor and returns +the total number of bytes written. + +The flags argument contains a bitwise OR of zero or more of the following flags: + +- RWF_DSYNC +- RWF_SYNC + +Using non-zero flags requires Linux 4.7 or newer. +[clinic start generated code]*/ + +static Py_ssize_t +os_pwritev_impl(PyObject *module, int fd, PyObject *buffers, Py_off_t offset, + int flags) +/*[clinic end generated code: output=e3dd3e9d11a6a5c7 input=803dc5ddbf0cfd3b]*/ +{ + Py_ssize_t cnt; + Py_ssize_t result; + int async_err = 0; + struct iovec *iov; + Py_buffer *buf; + + if (!PySequence_Check(buffers)) { + PyErr_SetString(PyExc_TypeError, + "pwritev() arg 2 must be a sequence"); + return -1; + } + + cnt = PySequence_Size(buffers); + if (cnt < 0) { + return -1; + } + +#ifndef HAVE_PWRITEV2 + if(flags != 0) { + argument_unavailable_error("pwritev2", "flags"); + return -1; + } +#endif + + if (iov_setup(&iov, &buf, buffers, cnt, PyBUF_SIMPLE) < 0) { + return -1; + } +#ifdef HAVE_PWRITEV2 + do { + Py_BEGIN_ALLOW_THREADS + _Py_BEGIN_SUPPRESS_IPH + result = pwritev2(fd, iov, cnt, offset, flags); + _Py_END_SUPPRESS_IPH + Py_END_ALLOW_THREADS + } while (result < 0 && errno == EINTR && !(async_err = PyErr_CheckSignals())); +#else + do { + Py_BEGIN_ALLOW_THREADS + _Py_BEGIN_SUPPRESS_IPH + result = pwritev(fd, iov, cnt, offset); + _Py_END_SUPPRESS_IPH + Py_END_ALLOW_THREADS + } while (result < 0 && errno == EINTR && !(async_err = PyErr_CheckSignals())); +#endif + + iov_cleanup(iov, buf, cnt); + if (result < 0) { + if (!async_err) { + posix_error(); + } + return -1; + } + + return result; +} +#endif /* HAVE_PWRITEV */ + + + #ifdef HAVE_MKFIFO /*[clinic input] @@ -12506,9 +12685,11 @@ static PyMethodDef posix_methods[] = { OS_READ_METHODDEF OS_READV_METHODDEF OS_PREAD_METHODDEF + OS_PREADV_METHODDEF OS_WRITE_METHODDEF OS_WRITEV_METHODDEF OS_PWRITE_METHODDEF + OS_PWRITEV_METHODDEF #ifdef HAVE_SENDFILE {"sendfile", (PyCFunction)posix_sendfile, METH_VARARGS | METH_KEYWORDS, posix_sendfile__doc__}, @@ -12953,6 +13134,19 @@ all_ins(PyObject *m) if (PyModule_AddIntMacro(m, F_TEST)) return -1; #endif +#ifdef RWF_DSYNC + if (PyModule_AddIntConstant(m, "RWF_DSYNC", RWF_DSYNC)) return -1; +#endif +#ifdef RWF_HIPRI + if (PyModule_AddIntConstant(m, "RWF_HIPRI", RWF_HIPRI)) return -1; +#endif +#ifdef RWF_SYNC + if (PyModule_AddIntConstant(m, "RWF_SYNC", RWF_SYNC)) return -1; +#endif +#ifdef RWF_NOWAIT + if (PyModule_AddIntConstant(m, "RWF_NOWAIT", RWF_NOWAIT)) return -1; +#endif + #ifdef HAVE_SPAWNV if (PyModule_AddIntConstant(m, "P_WAIT", _P_WAIT)) return -1; if (PyModule_AddIntConstant(m, "P_NOWAIT", _P_NOWAIT)) return -1; diff --git a/aclocal.m4 b/aclocal.m4 index 09694962914..8ed232fb515 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -13,7 +13,7 @@ m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 11 (pkg-config-0.29.1) +# serial 12 (pkg-config-0.29.2) dnl Copyright © 2004 Scott James Remnant . dnl Copyright © 2012-2015 Dan Nicholson @@ -55,7 +55,7 @@ dnl dnl See the "Since" comment for each macro you use to see what version dnl of the macros you require. m4_defun([PKG_PREREQ], -[m4_define([PKG_MACROS_VERSION], [0.29.1]) +[m4_define([PKG_MACROS_VERSION], [0.29.2]) m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) ])dnl PKG_PREREQ @@ -156,7 +156,7 @@ AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no -AC_MSG_CHECKING([for $1]) +AC_MSG_CHECKING([for $2]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) @@ -166,11 +166,11 @@ and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then - AC_MSG_RESULT([no]) + AC_MSG_RESULT([no]) _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` - else + else $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` fi # Put the nasty error message in config.log where it belongs @@ -187,7 +187,7 @@ installed software in a non-standard prefix. _PKG_TEXT])[]dnl ]) elif test $pkg_failed = untried; then - AC_MSG_RESULT([no]) + AC_MSG_RESULT([no]) m4_default([$4], [AC_MSG_FAILURE( [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full @@ -288,72 +288,4 @@ AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl ])dnl PKG_CHECK_VAR -dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND], -dnl [DESCRIPTION], [DEFAULT]) -dnl ------------------------------------------ -dnl -dnl Prepare a "--with-" configure option using the lowercase -dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and -dnl PKG_CHECK_MODULES in a single macro. -AC_DEFUN([PKG_WITH_MODULES], -[ -m4_pushdef([with_arg], m4_tolower([$1])) - -m4_pushdef([description], - [m4_default([$5], [build with ]with_arg[ support])]) - -m4_pushdef([def_arg], [m4_default([$6], [auto])]) -m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes]) -m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no]) - -m4_case(def_arg, - [yes],[m4_pushdef([with_without], [--without-]with_arg)], - [m4_pushdef([with_without],[--with-]with_arg)]) - -AC_ARG_WITH(with_arg, - AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),, - [AS_TR_SH([with_]with_arg)=def_arg]) - -AS_CASE([$AS_TR_SH([with_]with_arg)], - [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)], - [auto],[PKG_CHECK_MODULES([$1],[$2], - [m4_n([def_action_if_found]) $3], - [m4_n([def_action_if_not_found]) $4])]) - -m4_popdef([with_arg]) -m4_popdef([description]) -m4_popdef([def_arg]) - -])dnl PKG_WITH_MODULES - -dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [DESCRIPTION], [DEFAULT]) -dnl ----------------------------------------------- -dnl -dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES -dnl check._[VARIABLE-PREFIX] is exported as make variable. -AC_DEFUN([PKG_HAVE_WITH_MODULES], -[ -PKG_WITH_MODULES([$1],[$2],,,[$3],[$4]) - -AM_CONDITIONAL([HAVE_][$1], - [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"]) -])dnl PKG_HAVE_WITH_MODULES - -dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES, -dnl [DESCRIPTION], [DEFAULT]) -dnl ------------------------------------------------------ -dnl -dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after -dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make -dnl and preprocessor variable. -AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES], -[ -PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4]) - -AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], - [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])]) -])dnl PKG_HAVE_DEFINE_WITH_MODULES - m4_include([m4/ax_check_openssl.m4]) diff --git a/configure b/configure index 5904b54c3ed..6ce0728af11 100755 --- a/configure +++ b/configure @@ -11197,8 +11197,8 @@ for ac_func in alarm accept4 setitimer getitimer bind_textdomain_codeset chown \ initgroups kill killpg lchmod lchown lockf linkat lstat lutimes mmap \ memrchr mbrtowc mkdirat mkfifo \ mkfifoat mknod mknodat mktime mremap nice openat pathconf pause pipe2 plock poll \ - posix_fallocate posix_fadvise pread \ - pthread_init pthread_kill putenv pwrite readlink readlinkat readv realpath renameat \ + posix_fallocate posix_fadvise pread preadv preadv2 \ + pthread_init pthread_kill putenv pwrite pwritev pwritev2 readlink readlinkat readv realpath renameat \ sem_open sem_timedwait sem_getvalue sem_unlink sendfile setegid seteuid \ setgid sethostname \ setlocale setregid setreuid setresuid setresgid setsid setpgid setpgrp setpriority setuid setvbuf \ diff --git a/configure.ac b/configure.ac index 15ef872a53a..b901f807657 100644 --- a/configure.ac +++ b/configure.ac @@ -3431,8 +3431,8 @@ AC_CHECK_FUNCS(alarm accept4 setitimer getitimer bind_textdomain_codeset chown \ initgroups kill killpg lchmod lchown lockf linkat lstat lutimes mmap \ memrchr mbrtowc mkdirat mkfifo \ mkfifoat mknod mknodat mktime mremap nice openat pathconf pause pipe2 plock poll \ - posix_fallocate posix_fadvise pread \ - pthread_init pthread_kill putenv pwrite readlink readlinkat readv realpath renameat \ + posix_fallocate posix_fadvise pread preadv preadv2 \ + pthread_init pthread_kill putenv pwrite pwritev pwritev2 readlink readlinkat readv realpath renameat \ sem_open sem_timedwait sem_getvalue sem_unlink sendfile setegid seteuid \ setgid sethostname \ setlocale setregid setreuid setresuid setresgid setsid setpgid setpgrp setpriority setuid setvbuf \ diff --git a/pyconfig.h.in b/pyconfig.h.in index fd5a0c38d89..27fe136a976 100644 --- a/pyconfig.h.in +++ b/pyconfig.h.in @@ -710,6 +710,12 @@ /* Define to 1 if you have the `pread' function. */ #undef HAVE_PREAD +/* Define to 1 if you have the `preadv' function. */ +#undef HAVE_PREADV + +/* Define to 1 if you have the `preadv2' function. */ +#undef HAVE_PREADV2 + /* Define if you have the 'prlimit' functions. */ #undef HAVE_PRLIMIT @@ -746,6 +752,12 @@ /* Define to 1 if you have the `pwrite' function. */ #undef HAVE_PWRITE +/* Define to 1 if you have the `pwritev' function. */ +#undef HAVE_PWRITEV + +/* Define to 1 if you have the `pwritev2' function. */ +#undef HAVE_PWRITEV2 + /* Define to 1 if you have the `readlink' function. */ #undef HAVE_READLINK