forked from rrcarlosr/Jetpack
260 lines
6.8 KiB
C
260 lines
6.8 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Developed for DENX Software Engineering GmbH.
|
|
*
|
|
* Author: Pavel Kolesnikov <concord@emcraft.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* define DEBUG for debugging output (obviously ;-)) */
|
|
#if 0
|
|
#define DEBUG
|
|
#endif
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
|
|
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
|
|
#include <post.h>
|
|
|
|
#if CONFIG_POST & CONFIG_SYS_POST_ECC
|
|
|
|
/*
|
|
* MEMORY ECC test
|
|
*
|
|
* This test performs the checks ECC facility of memory.
|
|
*/
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ppc440.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
const static uint8_t syndrome_codes[] = {
|
|
0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3,
|
|
0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB,
|
|
0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2,
|
|
0X9D, 0X9B, 0X98, 0X97, 0X94, 0X92, 0X8F, 0X8A,
|
|
0x75, 0x70, 0X6D, 0X6B, 0X68, 0X67, 0X64, 0X62,
|
|
0X5E, 0X5B, 0X58, 0X57, 0X54, 0X52, 0X4F, 0X4A,
|
|
0x34, 0x31, 0X2C, 0X2A, 0X29, 0X26, 0X25, 0X23,
|
|
0X1C, 0X1A, 0X19, 0X16, 0X15, 0X13, 0X0E, 0X0B,
|
|
0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01
|
|
};
|
|
|
|
#define ECC_START_ADDR 0x10
|
|
#define ECC_STOP_ADDR 0x2000
|
|
#define ECC_PATTERN 0x01010101
|
|
#define ECC_PATTERN_CORR 0x11010101
|
|
#define ECC_PATTERN_UNCORR 0x61010101
|
|
|
|
inline static void disable_ecc(void)
|
|
{
|
|
uint32_t value;
|
|
|
|
sync(); /* Wait for any pending memory accesses to complete. */
|
|
mfsdram(DDR0_22, value);
|
|
mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
|
|
| DDR0_22_CTRL_RAW_ECC_DISABLE);
|
|
}
|
|
|
|
inline static void clear_and_enable_ecc(void)
|
|
{
|
|
uint32_t value;
|
|
|
|
sync(); /* Wait for any pending memory accesses to complete. */
|
|
mfsdram(DDR0_00, value);
|
|
mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
|
|
mfsdram(DDR0_22, value);
|
|
mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
|
|
| DDR0_22_CTRL_RAW_ECC_ENABLE);
|
|
}
|
|
|
|
static uint32_t get_ecc_status(void)
|
|
{
|
|
uint32_t int_status;
|
|
#if defined(DEBUG)
|
|
uint8_t syndrome;
|
|
uint32_t hdata, ldata, haddr, laddr;
|
|
uint32_t value;
|
|
#endif
|
|
|
|
mfsdram(DDR0_00, int_status);
|
|
int_status &= DDR0_00_INT_STATUS_MASK;
|
|
|
|
#if defined(DEBUG)
|
|
if (int_status & (DDR0_00_INT_STATUS_BIT0 | DDR0_00_INT_STATUS_BIT1)) {
|
|
mfsdram(DDR0_32, laddr);
|
|
mfsdram(DDR0_33, haddr);
|
|
haddr &= 0x00000001;
|
|
if (int_status & DDR0_00_INT_STATUS_BIT1)
|
|
debug("Multiple accesses");
|
|
else
|
|
debug("A single access");
|
|
|
|
debug(" outside the defined physical memory space detected\n"
|
|
" addr = 0x%01x%08x\n", haddr, laddr);
|
|
}
|
|
if (int_status & (DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT3)) {
|
|
unsigned int bit;
|
|
|
|
mfsdram(DDR0_23, value);
|
|
syndrome = (value >> 16) & 0xff;
|
|
for (bit = 0; bit < sizeof(syndrome_codes); bit++)
|
|
if (syndrome_codes[bit] == syndrome)
|
|
break;
|
|
|
|
mfsdram(DDR0_38, laddr);
|
|
mfsdram(DDR0_39, haddr);
|
|
haddr &= 0x00000001;
|
|
mfsdram(DDR0_40, ldata);
|
|
mfsdram(DDR0_41, hdata);
|
|
if (int_status & DDR0_00_INT_STATUS_BIT3)
|
|
debug("Multiple correctable ECC events");
|
|
else
|
|
debug("Single correctable ECC event");
|
|
|
|
debug(" detected\n 0x%01x%08x - 0x%08x%08x, bit - %d\n",
|
|
haddr, laddr, hdata, ldata, bit);
|
|
}
|
|
if (int_status & (DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT5)) {
|
|
mfsdram(DDR0_23, value);
|
|
syndrome = (value >> 8) & 0xff;
|
|
mfsdram(DDR0_34, laddr);
|
|
mfsdram(DDR0_35, haddr);
|
|
haddr &= 0x00000001;
|
|
mfsdram(DDR0_36, ldata);
|
|
mfsdram(DDR0_37, hdata);
|
|
if (int_status & DDR0_00_INT_STATUS_BIT5)
|
|
debug("Multiple uncorrectable ECC events");
|
|
else
|
|
debug("Single uncorrectable ECC event");
|
|
|
|
debug(" detected\n 0x%01x%08x - 0x%08x%08x, "
|
|
"syndrome - 0x%02x\n",
|
|
haddr, laddr, hdata, ldata, syndrome);
|
|
}
|
|
if (int_status & DDR0_00_INT_STATUS_BIT6)
|
|
debug("DRAM initialization complete\n");
|
|
#endif /* defined(DEBUG) */
|
|
|
|
return int_status;
|
|
}
|
|
|
|
static int test_ecc(uint32_t ecc_addr)
|
|
{
|
|
uint32_t value;
|
|
volatile uint32_t *const ecc_mem = (volatile uint32_t *)ecc_addr;
|
|
int ret = 0;
|
|
|
|
WATCHDOG_RESET();
|
|
|
|
debug("Entering test_ecc(0x%08x)\n", ecc_addr);
|
|
/* Set up correct ECC in memory */
|
|
disable_ecc();
|
|
clear_and_enable_ecc();
|
|
out_be32(ecc_mem, ECC_PATTERN);
|
|
out_be32(ecc_mem + 1, ECC_PATTERN);
|
|
ppcDcbf((u32)ecc_mem);
|
|
|
|
/* Verify no ECC error reading back */
|
|
value = in_be32(ecc_mem);
|
|
disable_ecc();
|
|
if (ECC_PATTERN != value) {
|
|
debug("Data read error (no-error case): "
|
|
"expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
|
|
ret = 1;
|
|
}
|
|
value = get_ecc_status();
|
|
if (0x00000000 != value) {
|
|
/* Expected no ECC status reported */
|
|
debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
|
|
0x00000000, value);
|
|
ret = 1;
|
|
}
|
|
|
|
/* Test for correctable error by creating a one-bit error */
|
|
out_be32(ecc_mem, ECC_PATTERN_CORR);
|
|
ppcDcbf((u32)ecc_mem);
|
|
clear_and_enable_ecc();
|
|
value = in_be32(ecc_mem);
|
|
disable_ecc();
|
|
/* Test that the corrected data was read */
|
|
if (ECC_PATTERN != value) {
|
|
debug("Data read error (correctable-error case): "
|
|
"expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
|
|
ret = 1;
|
|
}
|
|
value = get_ecc_status();
|
|
if ((DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT7) != value) {
|
|
/* Expected a single correctable error reported */
|
|
debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
|
|
DDR0_00_INT_STATUS_BIT2, value);
|
|
ret = 1;
|
|
}
|
|
|
|
/* Test for uncorrectable error by creating a two-bit error */
|
|
out_be32(ecc_mem, ECC_PATTERN_UNCORR);
|
|
ppcDcbf((u32)ecc_mem);
|
|
clear_and_enable_ecc();
|
|
value = in_be32(ecc_mem);
|
|
disable_ecc();
|
|
/* Test that the corrected data was read */
|
|
if (ECC_PATTERN_UNCORR != value) {
|
|
debug("Data read error (uncorrectable-error case): "
|
|
"expected 0x%08x, read 0x%08x\n", ECC_PATTERN_UNCORR,
|
|
value);
|
|
ret = 1;
|
|
}
|
|
value = get_ecc_status();
|
|
if ((DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT7) != value) {
|
|
/* Expected a single uncorrectable error reported */
|
|
debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
|
|
DDR0_00_INT_STATUS_BIT4, value);
|
|
ret = 1;
|
|
}
|
|
|
|
/* Remove error from SDRAM and enable ECC. */
|
|
out_be32(ecc_mem, ECC_PATTERN);
|
|
ppcDcbf((u32)ecc_mem);
|
|
clear_and_enable_ecc();
|
|
|
|
return ret;
|
|
}
|
|
|
|
int ecc_post_test(int flags)
|
|
{
|
|
int ret = 0;
|
|
uint32_t value;
|
|
uint32_t iaddr;
|
|
|
|
mfsdram(DDR0_22, value);
|
|
if (0x3 != DDR0_22_CTRL_RAW_DECODE(value)) {
|
|
debug("SDRAM ECC not enabled, skipping ECC POST.\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Mask all interrupts. */
|
|
mfsdram(DDR0_01, value);
|
|
mtsdram(DDR0_01, (value & ~DDR0_01_INT_MASK_MASK)
|
|
| DDR0_01_INT_MASK_ALL_OFF);
|
|
|
|
for (iaddr = ECC_START_ADDR; iaddr <= ECC_STOP_ADDR; iaddr += iaddr) {
|
|
ret = test_ecc(iaddr);
|
|
if (ret)
|
|
break;
|
|
}
|
|
/*
|
|
* Clear possible errors resulting from ECC testing. (If not done, we
|
|
* we could get an interrupt later on when exceptions are enabled.)
|
|
*/
|
|
set_mcsr(get_mcsr());
|
|
debug("ecc_post_test() returning %d\n", ret);
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_POST & CONFIG_SYS_POST_ECC */
|
|
#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
|