menu "ARM architecture" depends on ARM config SYS_ARCH default "arm" config ARM64 bool if ARM64 config POSITION_INDEPENDENT bool "Generate position-independent pre-relocation code" help U-Boot expects to be linked to a specific hard-coded address, and to be loaded to and run from that address. This option lifts that restriction, thus allowing the code to be loaded to and executed from almost any address. This logic relies on the relocation information that is embedded into the binary to support U-Boot relocating itself to the top-of-RAM later during execution. config SYS_INIT_SP_BSS_OFFSET int help U-Boot typically uses a hard-coded value for the stack pointer before relocation. Define this option to instead calculate the initial SP at run-time. This is useful to avoid hard-coding addresses into U-Boot, so that can be loaded and executed at arbitrary addresses and thus avoid using arbitrary addresses at runtime. This option's value is the offset added to &_bss_start in order to calculate the stack pointer. This offset should be large enough so that the early malloc region, global data (gd), and early stack usage do not overlap any appended DTB. config LINUX_KERNEL_IMAGE_HEADER bool help Place a Linux kernel image header at the start of the U-Boot binary. The format of the header is described in the Linux kernel source at Documentation/arm64/booting.txt. This feature is useful since the image header reports the amount of memory (BSS and similar) that U-Boot needs to use, but which isn't part of the binary. if LINUX_KERNEL_IMAGE_HEADER config LNX_KRNL_IMG_TEXT_OFFSET_BASE hex help The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the TEXT_OFFSET value written in to the Linux kernel image header. endif endif config STATIC_RELA bool default y if ARM64 && !POSITION_INDEPENDENT config DMA_ADDR_T_64BIT bool default y if ARM64 config HAS_VBAR bool config HAS_THUMB2 bool config CPU_ARM720T bool config CPU_ARM920T bool config CPU_ARM926EJS bool config CPU_ARM946ES bool config CPU_ARM1136 bool config CPU_ARM1176 bool select HAS_VBAR config CPU_V7 bool select HAS_VBAR select HAS_THUMB2 config CPU_V7M bool select HAS_THUMB2 config CPU_PXA bool config CPU_SA1100 bool config SYS_CPU default "arm720t" if CPU_ARM720T default "arm920t" if CPU_ARM920T default "arm926ejs" if CPU_ARM926EJS default "arm946es" if CPU_ARM946ES default "arm1136" if CPU_ARM1136 default "arm1176" if CPU_ARM1176 default "armv7" if CPU_V7 default "armv7m" if CPU_V7M default "pxa" if CPU_PXA default "sa1100" if CPU_SA1100 default "armv8" if ARM64 config SYS_ARM_ARCH int default 4 if CPU_ARM720T default 4 if CPU_ARM920T default 5 if CPU_ARM926EJS default 5 if CPU_ARM946ES default 6 if CPU_ARM1136 default 6 if CPU_ARM1176 default 7 if CPU_V7 default 7 if CPU_V7M default 5 if CPU_PXA default 4 if CPU_SA1100 default 8 if ARM64 config SEMIHOSTING bool "support boot from semihosting" help In emulated environments, semihosting is a way for the hosted environment to call out to the emulator to retrieve files from the host machine. config SYS_L2CACHE_OFF bool "L2cache off" help If SoC does not support L2CACHE or one do not want to enable L2CACHE, choose this option. config ENABLE_ARM_SOC_BOOT0_HOOK bool "prepare BOOT0 header" help If the SoC's BOOT0 requires a header area filled with (magic) values, then choose this option, and create a define called ARM_SOC_BOOT0_HOOK which contains the required assembler preprocessor code. choice prompt "Target select" default TARGET_HIKEY config ARCH_AT91 bool "Atmel AT91" config TARGET_EDB93XX bool "Support edb93xx" select CPU_ARM920T config TARGET_VCMA9 bool "Support VCMA9" select CPU_ARM920T config TARGET_SMDK2410 bool "Support smdk2410" select CPU_ARM920T config TARGET_ASPENITE bool "Support aspenite" select CPU_ARM926EJS config TARGET_GPLUGD bool "Support gplugd" select CPU_ARM926EJS config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926EJS help Support for TI's DaVinci platform. config KIRKWOOD bool "Marvell Kirkwood" select CPU_ARM926EJS config ARCH_MVEBU bool "Marvell MVEBU family (Armada XP/375/38x)" select CPU_V7 select SUPPORT_SPL select OF_CONTROL select OF_SEPARATE select DM select DM_ETH select DM_SERIAL select DM_SPI select DM_SPI_FLASH select SPL_DM select SPL_DM_SEQ_ALIAS select SPL_OF_CONTROL select SPL_SIMPLE_BUS config TARGET_DEVKIT3250 bool "Support devkit3250" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_WORK_92105 bool "Support work_92105" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_MX25PDK bool "Support mx25pdk" select CPU_ARM926EJS config TARGET_ZMX25 bool "Support zmx25" select CPU_ARM926EJS config TARGET_APF27 bool "Support apf27" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_APX4DEVKIT bool "Support apx4devkit" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_XFI3 bool "Support xfi3" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_M28EVK bool "Support m28evk" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_MX23EVK bool "Support mx23evk" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_MX28EVK bool "Support mx28evk" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_MX23_OLINUXINO bool "Support mx23_olinuxino" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_BG0900 bool "Support bg0900" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_SANSA_FUZE_PLUS bool "Support sansa_fuze_plus" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_SC_SPS_1 bool "Support sc_sps_1" select CPU_ARM926EJS select SUPPORT_SPL config ORION5X bool "Marvell Orion" select CPU_ARM926EJS config TARGET_SPEAR300 bool "Support spear300" select CPU_ARM926EJS config TARGET_SPEAR310 bool "Support spear310" select CPU_ARM926EJS config TARGET_SPEAR320 bool "Support spear320" select CPU_ARM926EJS config TARGET_SPEAR600 bool "Support spear600" select CPU_ARM926EJS config TARGET_STV0991 bool "Support stv0991" select CPU_V7 select DM select DM_SERIAL select DM_SPI select DM_SPI_FLASH select SPI_FLASH config TARGET_X600 bool "Support x600" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_IMX31_PHYCORE bool "Support imx31_phycore" select CPU_ARM1136 config TARGET_MX31ADS bool "Support mx31ads" select CPU_ARM1136 config TARGET_MX31PDK bool "Support mx31pdk" select CPU_ARM1136 select SUPPORT_SPL config TARGET_WOODBURN bool "Support woodburn" select CPU_ARM1136 config TARGET_WOODBURN_SD bool "Support woodburn_sd" select CPU_ARM1136 select SUPPORT_SPL config TARGET_FLEA3 bool "Support flea3" select CPU_ARM1136 config TARGET_MX35PDK bool "Support mx35pdk" select CPU_ARM1136 config ARCH_BCM283X bool "Broadcom BCM283X family" select DM select DM_SERIAL select DM_GPIO config TARGET_VEXPRESS_CA15_TC2 bool "Support vexpress_ca15_tc2" select CPU_V7 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT config TARGET_VEXPRESS_CA5X2 bool "Support vexpress_ca5x2" select CPU_V7 config TARGET_VEXPRESS_CA9X4 bool "Support vexpress_ca9x4" select CPU_V7 config TARGET_BRXRE1 bool "Support BRXRE1" select CPU_V7 select SUPPORT_SPL config TARGET_BRPPT1 bool "Support BRPPT1" select CPU_V7 select SUPPORT_SPL config TARGET_CM_T335 bool "Support cm_t335" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_PEPPER bool "Support pepper" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_AM335X_IGEP0033 bool "Support am335x_igep0033" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_PCM051 bool "Support pcm051" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_DRACO bool "Support draco" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_THUBAN bool "Support thuban" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_RASTABAN bool "Support rastaban" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_ETAMIN bool "Support etamin" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_PXM2 bool "Support pxm2" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_RUT bool "Support rut" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_PENGWYN bool "Support pengwyn" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_AM335X_BALTOS bool "Support am335x_baltos" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_AM335X_EVM bool "Support am335x_evm" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO select TI_I2C_BOARD_DETECT config TARGET_AM335X_SHC bool "Support am335x based shc board from bosch" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL select DM_GPIO config TARGET_AM335X_SL50 bool "Support am335x_sl50" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL config TARGET_BAV335X bool "Support bav335x" select CPU_V7 select SUPPORT_SPL select DM select DM_SERIAL help The BAV335x OEM Network Processor integrates all the functions of an embedded network computer in a small, easy to use SODIMM module which incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8 processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit ethernet with simple connection to external connectors. For more information, visit: http://birdland.com/oem config TARGET_TI814X_EVM bool "Support ti814x_evm" select CPU_V7 select SUPPORT_SPL config TARGET_TI816X_EVM bool "Support ti816x_evm" select CPU_V7 select SUPPORT_SPL config TARGET_BCM23550_W1D bool "Support bcm23550_w1d" select CPU_V7 config TARGET_BCM28155_AP bool "Support bcm28155_ap" select CPU_V7 config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7 config TARGET_BCMNSP bool "Support bcmnsp" select CPU_V7 config ARCH_EXYNOS bool "Samsung EXYNOS" select DM select DM_SPI_FLASH select DM_SERIAL select DM_SPI select DM_GPIO select DM_KEYBOARD config ARCH_S5PC1XX bool "Samsung S5PC1XX" select CPU_V7 select DM select DM_SERIAL select DM_GPIO config ARCH_HIGHBANK bool "Calxeda Highbank" select CPU_V7 config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select DM select DM_SERIAL config ARCH_KEYSTONE bool "TI Keystone" select CPU_V7 select SUPPORT_SPL select CMD_POWEROFF config ARCH_MESON bool "Amlogic Meson" help Support for the Meson SoC family developed by Amlogic Inc., targeted at media players and tablet computers. We currently support the S905 (GXBaby) 64-bit SoC. config ARCH_MX7 bool "Freescale MX7" select CPU_V7 config ARCH_MX6 bool "Freescale MX6" select CPU_V7 config ARCH_MX5 bool "Freescale MX5" select CPU_V7 config TARGET_M53EVK bool "Support m53evk" select CPU_V7 select SUPPORT_SPL config TARGET_MX51EVK bool "Support mx51evk" select CPU_V7 config TARGET_MX53ARD bool "Support mx53ard" select CPU_V7 config TARGET_MX53EVK bool "Support mx53evk" select CPU_V7 config TARGET_MX53LOCO bool "Support mx53loco" select CPU_V7 config TARGET_MX53SMD bool "Support mx53smd" select CPU_V7 config OMAP34XX bool "OMAP34XX SoC" select CPU_V7 config OMAP44XX bool "OMAP44XX SoC" select CPU_V7 select SUPPORT_SPL config OMAP54XX bool "OMAP54XX SoC" select CPU_V7 select SUPPORT_SPL config AM43XX bool "AM43XX SoC" select CPU_V7 select SUPPORT_SPL help Support for AM43xx SOC from Texas Instruments. The AM43xx high performance SOC features a Cortex-A9 ARM core, a quad core PRU-ICSS for industrial Ethernet protocols, dual camera support, optional 3D graphics and an optional customer programmable secure boot. config RMOBILE bool "Renesas ARM SoCs" select CPU_V7 config TARGET_S32V234EVB bool "Support s32v234evb" select ARM64 config ARCH_SNAPDRAGON bool "Qualcomm Snapdragon SoCs" select ARM64 select DM select DM_GPIO select DM_SERIAL select SPMI select OF_CONTROL select OF_SEPARATE config ARCH_SOCFPGA bool "Altera SOCFPGA family" select CPU_V7 select SUPPORT_SPL select OF_CONTROL select SPL_OF_CONTROL select DM select DM_SPI_FLASH select DM_SPI config TARGET_CM_T43 bool "Support cm_t43" select CPU_V7 select SUPPORT_SPL config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" select CMD_GPIO select CMD_MMC if MMC select CMD_USB select DM select DM_ETH select DM_GPIO select DM_KEYBOARD select DM_SERIAL select DM_USB select OF_BOARD_SETUP select OF_CONTROL select OF_SEPARATE select SPL_STACK_R if SUPPORT_SPL select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL select SYS_NS16550 select USB select USB_STORAGE select USB_KEYBOARD select USE_TINY_PRINTF config TARGET_TS4800 bool "Support TS4800" select CPU_V7 config TARGET_VF610TWR bool "Support vf610twr" select CPU_V7 config TARGET_COLIBRI_VF bool "Support Colibri VF50/61" select CPU_V7 config TARGET_PCM052 bool "Support pcm-052" select CPU_V7 config ARCH_ZYNQ bool "Xilinx Zynq Platform" select CPU_V7 select SUPPORT_SPL select OF_CONTROL select SPL_OF_CONTROL if SPL select DM select DM_ETH select DM_GPIO select SPL_DM if SPL select DM_MMC select DM_SPI select DM_SERIAL select DM_SPI_FLASH select SPL_SEPARATE_BSS if SPL config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" select ARM64 select DM select OF_CONTROL select DM_SERIAL select SUPPORT_SPL config TEGRA bool "NVIDIA Tegra" config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" select ARM64 config TARGET_VEXPRESS64_BASE_FVP bool "Support Versatile Express ARMv8a FVP BASE model" select ARM64 select SEMIHOSTING config TARGET_VEXPRESS64_BASE_FVP_DRAM bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" select ARM64 help This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides the default config to allow the user to load the images directly into DRAM using model parameters rather than by using semi-hosting to load the files from the host filesystem. config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 config TARGET_LS2080A_EMU bool "Support ls2080a_emu" select ARM64 select ARMV8_MULTIENTRY help Support for Freescale LS2080A_EMU platform The LS2080A Development System (EMULATOR) is a pre silicon development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2080A_SIMU bool "Support ls2080a_simu" select ARM64 select ARMV8_MULTIENTRY help Support for Freescale LS2080A_SIMU platform The LS2080A Development System (QDS) is a pre silicon development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2080AQDS bool "Support ls2080aqds" select ARM64 select ARMV8_MULTIENTRY select SUPPORT_SPL help Support for Freescale LS2080AQDS platform The LS2080A Development System (QDS) is a high-performance development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2080ARDB bool "Support ls2080ardb" select ARM64 select ARMV8_MULTIENTRY select SUPPORT_SPL help Support for Freescale LS2080ARDB platform. The LS2080A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_HIKEY bool "Support HiKey 96boards Consumer Edition Platform" select ARM64 select DM select DM_GPIO select DM_SERIAL select OF_CONTROL help Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. config TARGET_LS1012AQDS bool "Support ls1012aqds" select ARM64 help Support for Freescale LS1012AQDS platform. The LS1012A Development System (QDS) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1012ARDB bool "Support ls1012ardb" select ARM64 help Support for Freescale LS1012ARDB platform. The LS1012A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1012AFRDM bool "Support ls1012afrdm" select ARM64 help Support for Freescale LS1012AFRDM platform. The LS1012A Freedom board (FRDM) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1021AQDS bool "Support ls1021aqds" select CPU_V7 select SUPPORT_SPL config TARGET_LS1021ATWR bool "Support ls1021atwr" select CPU_V7 select SUPPORT_SPL config TARGET_LS1043AQDS bool "Support ls1043aqds" select ARM64 select ARMV8_MULTIENTRY select SUPPORT_SPL help Support for Freescale LS1043AQDS platform. config TARGET_LS1043ARDB bool "Support ls1043ardb" select ARM64 select ARMV8_MULTIENTRY select SUPPORT_SPL help Support for Freescale LS1043ARDB platform. config TARGET_H2200 bool "Support h2200" select CPU_PXA config TARGET_ZIPITZ2 bool "Support zipitz2" select CPU_PXA config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" select CLK_UNIPHIER select SUPPORT_SPL select SPL select OF_CONTROL select SPL_OF_CONTROL select OF_LIBFDT select DM select SPL_DM select DM_GPIO select DM_SERIAL select DM_I2C select DM_MMC help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) config STM32 bool "Support STM32" select CPU_V7M select DM select DM_SERIAL config ARCH_ROCKCHIP bool "Support Rockchip SoCs" select SUPPORT_SPL select SPL select OF_CONTROL select CPU_V7 select DM config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" select ARM64 select OF_CONTROL endchoice source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-integrator/Kconfig" source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/cpu/armv7/mx7/Kconfig" source "arch/arm/cpu/armv7/mx6/Kconfig" source "arch/arm/cpu/armv7/mx5/Kconfig" source "arch/arm/cpu/armv7/omap-common/Kconfig" source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/cpu/armv7/rmobile/Kconfig" source "arch/arm/mach-meson/Kconfig" source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-s5pc1xx/Kconfig" source "arch/arm/mach-snapdragon/Kconfig" source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-stm32/Kconfig" source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-uniphier/Kconfig" source "arch/arm/mach-zynq/Kconfig" source "arch/arm/cpu/armv7/Kconfig" source "arch/arm/cpu/armv8/zynqmp/Kconfig" source "arch/arm/cpu/armv8/Kconfig" source "arch/arm/imx-common/Kconfig" source "board/bosch/shc/Kconfig" source "board/BuR/brxre1/Kconfig" source "board/BuR/brppt1/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/armadeus/apf27/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/bluegiga/apx4devkit/Kconfig" source "board/broadcom/bcm23550_w1d/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/cirrus/edb93xx/Kconfig" source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t43/Kconfig" source "board/creative/xfi3/Kconfig" source "board/denx/m28evk/Kconfig" source "board/denx/m53evk/Kconfig" source "board/freescale/ls2080a/Kconfig" source "board/freescale/ls2080aqds/Kconfig" source "board/freescale/ls2080ardb/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1043aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" source "board/freescale/ls1043ardb/Kconfig" source "board/freescale/ls1012aqds/Kconfig" source "board/freescale/ls1012ardb/Kconfig" source "board/freescale/ls1012afrdm/Kconfig" source "board/freescale/mx23evk/Kconfig" source "board/freescale/mx25pdk/Kconfig" source "board/freescale/mx28evk/Kconfig" source "board/freescale/mx31ads/Kconfig" source "board/freescale/mx31pdk/Kconfig" source "board/freescale/mx35pdk/Kconfig" source "board/freescale/mx51evk/Kconfig" source "board/freescale/mx53ard/Kconfig" source "board/freescale/mx53evk/Kconfig" source "board/freescale/mx53loco/Kconfig" source "board/freescale/mx53smd/Kconfig" source "board/freescale/s32v234evb/Kconfig" source "board/freescale/vf610twr/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" source "board/mpl/vcma9/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/phytec/pcm052/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/samsung/smdk2410/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" source "board/siemens/rut/Kconfig" source "board/silica/pengwyn/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" source "board/syteco/zmx25/Kconfig" source "board/tcl/sl50/Kconfig" source "board/ti/am335x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/birdland/bav335x/Kconfig" source "board/ti/ti814x/Kconfig" source "board/ti/ti816x/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/toradex/colibri_vf/Kconfig" source "board/technologic/ts4800/Kconfig" source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig" source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" endmenu