/* * (C) Copyright 2020 * NVIDIA Corporation * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include #include "../p2571/max77620_init.h" #define ETH_ALEN 6 void pin_mux_mmc(void) { struct udevice *dev; uchar val; int ret; /* Turn on MAX77620 LDO2 to 3.3V for SD card power */ debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__); ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev); if (ret) { printf("%s: Cannot find MAX77620 I2C chip\n", __func__); return; } /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ val = 0xF2; ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1); if (ret) printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret); /* Disable LDO4 discharge */ ret = dm_i2c_read(dev, MAX77620_CNFG2_L4_REG, &val, 1); if (ret) { printf("i2c_read 0 0x3c 0x2c failed: %d\n", ret); } else { val &= ~BIT(1); /* ADE */ ret = dm_i2c_write(dev, MAX77620_CNFG2_L4_REG, &val, 1); if (ret) printf("i2c_write 0 0x3c 0x2c failed: %d\n", ret); } /* Set MBLPD */ ret = dm_i2c_read(dev, MAX77620_CNFGGLBL1_REG, &val, 1); if (ret) { printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret); } else { val |= BIT(6); /* MBLPD */ ret = dm_i2c_write(dev, MAX77620_CNFGGLBL1_REG, &val, 1); if (ret) printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret); } } #ifdef CONFIG_PCI_TEGRA int tegra_pcie_board_init(void) { struct udevice *dev; uchar val; int ret; /* Turn on MAX77620 LDO1 to 1.05V for PEX power */ debug("%s: Set LDO1 for PEX power to 1.05V\n", __func__); ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev); if (ret) { printf("%s: Cannot find MAX77620 I2C chip\n", __func__); return -1; } /* 0xCA for 1.05v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ val = 0xCA; ret = dm_i2c_write(dev, MAX77620_CNFG1_L1_REG, &val, 1); if (ret) printf("i2c_write 0 0x3c 0x25 failed: %d\n", ret); return 0; } #endif /* PCI */ /* * Attempt to use /chosen/nvidia,ethernet-mac in the cboot DTB as U-Boot's * ethaddr environment variable if possible. */ int set_ethaddr_from_cboot(const void *fdt) { int node, len, err; const uchar *mac; /* Already a valid address in the environment? If so, keep it */ if (getenv("ethaddr")) return 0; node = fdt_path_offset(fdt, "/chosen"); if (node < 0) { printf("Can't find /chosen node in CBoot DTB\n"); return node; } mac = fdt_getprop(fdt, node, "nvidia,ethernet-mac", &len); if (!mac) { printf("Can't find nvidia,ethernet-mac property in CBoot DTB\n"); return -ENOENT; } debug("%s: MAC address: %s\n", __func__, mac); /* Set MAC address */ err = setenv("ethaddr", (void *)mac); if (err) { printf("Failed to set ethaddr from CBoot DTB: %d\n", err); return err; } return 0; } int ft_board_setup(void *fdt, bd_t *bd) { uchar mac[ETH_ALEN]; int node, err; node = fdt_path_offset(fdt, "/pcie@1003000/pci@2,0/ethernet@0,0"); if (node < 0) return 0; debug("PCI ethernet device tree node found\n"); if (eth_getenv_enetaddr("ethaddr", mac)) { err = fdt_setprop(fdt, node, "mac-address", mac, ETH_ALEN); if (err < 0) return 0; debug("MAC address set: %02x:%02x:%02x:%02x:%02x:%02x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); } return 0; }