px4-firmware/misc/buildroot/toolchain/gcc/gcc-nuttx-3.x.mk

227 lines
7.4 KiB
Makefile

# Makefile for to build a gcc/nuttx toolchain
#
# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
# Without sysroot support. Sysroot toolchain is gcc-uclibc-4.x.mk
ifneq ($(BR2_GCC_SUPPORTS_SYSROOT),y)
GCC_OFFICIAL_VER:=$(GCC_VERSION)
GCC_SITE:=http://ftp.gnu.org/gnu/gcc/gcc-$(GCC_VERSION)
GCC_SOURCE:=gcc-$(GCC_OFFICIAL_VER).tar.bz2
GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_OFFICIAL_VER)
GCC_CAT:=$(BZCAT)
GCC_STRIP_HOST_BINARIES:=true
#############################################################
#
# Setup some initial stuff
#
#############################################################
GCC_TARGET_LANGUAGES:=c
GCC_TARGET_PREREQ=
GCC_STAGING_PREREQ=
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),c++
endif
ifeq ($(BR2_INSTALL_LIBGCJ),y)
GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),java
endif
ifeq ($(BR2_INSTALL_OBJC),y)
GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),objc
endif
ifeq ($(BR2_INSTALL_FORTRAN),y)
GCC_TARGET_LANGUAGES:=$(GCC_TARGET_LANGUAGES),fortran
endif
GCC_SHARED_LIBGCC:=--disable-shared
ifneq ($(BR2_ENABLE_LOCALE),y)
GCC_ENABLE_CLOCALE:=--disable-clocale
endif
#############################################################
#
# build the gcc compiler
#
#############################################################
GCC_BUILD_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)-build
$(DL_DIR)/$(GCC_SOURCE):
mkdir -p $(DL_DIR)
$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
gcc-unpacked: $(GCC_DIR)/.unpacked
$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
mkdir -p $(TOOL_BUILD_DIR)
$(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) $(TAR_OPTIONS) -
$(CONFIG_UPDATE) $(GCC_DIR)
touch $@
gcc-patched: $(GCC_DIR)/.patched
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
# Apply any files named gcc-*.patch from the source directory to gcc
toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) \*.patch
# Note: The soft float situation has improved considerably with gcc 3.4.x.
# We can dispense with the custom spec files, as well as libfloat for the arm case.
# However, we still need a patch for arm. There's a similar patch for gcc 3.3.x
# which needs to be integrated so we can kill of libfloat for good, except for
# anyone (?) who might still be using gcc 2.95. mjn3
ifeq ($(BR2_SOFT_FLOAT),y)
ifeq ("$(strip $(ARCH))","arm")
toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) arm-softfloat.patch.conditional
endif
ifeq ("$(strip $(ARCH))","armeb")
toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc/$(GCC_VERSION) arm-softfloat.patch.conditional
endif
# Not yet updated to 3.4.1.
#ifeq ("$(strip $(ARCH))","i386")
#toolchain/patch-kernel.sh $(GCC_DIR) toolchain/gcc i386-gcc-soft-float.patch
#endif
endif
touch $@
$(GCC_BUILD_DIR)/.configured: $(GCC_DIR)/.patched $(GCC_STAGING_PREREQ)
mkdir -p $(GCC_BUILD_DIR)
# Important! Required for limits.h to be fixed.
ln -snf ../include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
(cd $(GCC_BUILD_DIR); rm -rf config.cache; PATH=$(TARGET_PATH) \
CC="$(HOSTCC)" \
$(GCC_DIR)/configure \
--prefix=$(STAGING_DIR) \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_HOST_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=$(GCC_TARGET_LANGUAGES) \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(GCC_SHARED_LIBGCC) \
$(DISABLE_NLS) \
$(THREADS) \
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
$(GCC_WITH_ARCH) $(GCC_WITH_TUNE) $(GCC_WITH_MODE) \
$(GCC_USE_SJLJ_EXCEPTIONS) \
$(DISABLE_LARGEFILE) \
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $@
$(GCC_BUILD_DIR)/.compiled: $(GCC_BUILD_DIR)/.configured
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR) all
touch $@
$(GCC_BUILD_DIR)/.installed: $(GCC_BUILD_DIR)/.compiled
PATH=$(TARGET_PATH) $(MAKE) -C $(GCC_BUILD_DIR) install
if [ -d "$(STAGING_DIR)/lib64" ] ; then \
if [ ! -e "$(STAGING_DIR)/lib" ] ; then \
mkdir "$(STAGING_DIR)/lib" ; \
fi ; \
mv "$(STAGING_DIR)/lib64/"* "$(STAGING_DIR)/lib/" ; \
rmdir "$(STAGING_DIR)/lib64" ; \
fi
# Strip the host binaries
ifeq ($(GCC_STRIP_HOST_BINARIES),true)
-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
endif
# Make sure we have 'cc'.
if [ ! -e $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-cc ] ; then \
ln -snf $(REAL_GNU_TARGET_NAME)-gcc \
$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-cc ; \
fi;
if [ ! -e $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin/cc ] ; then \
ln -snf gcc $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin/cc ; \
fi;
# Set up the symlinks to enable lying about target name.
set -e; \
(cd $(STAGING_DIR); \
if [ "$(REAL_GNU_TARGET_NAME)" != "$(GNU_TARGET_NAME)" ]; then \
ln -snf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
cd bin; \
for app in $(REAL_GNU_TARGET_NAME)-* ; do \
ln -snf $${app} \
$(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
done; \
fi; \
);
#
# Now for the ugly 3.3.x soft float hack...
#
ifeq ($(BR2_SOFT_FLOAT),y)
ifeq ($(findstring 3.3.,$(GCC_VERSION)),3.3.)
# Make sure we have a soft float specs file for this arch
if [ ! -f toolchain/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float ] ; then \
echo soft float configured but no specs file for this arch ; \
/bin/false ; \
fi;
# Replace specs file with one that defaults to soft float mode.
if [ ! -f $(STAGING_DIR)/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
echo staging dir specs file is missing ; \
/bin/false ; \
fi;
cp toolchain/gcc/$(GCC_VERSION)/specs-$(ARCH)-soft-float $(STAGING_DIR)/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
endif
endif
#
# Ok... that's enough of that.
#
touch $@
$(GCC_BUILD_DIR)/.libs_installed: $(GCC_BUILD_DIR)/.installed
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
# We have disabled building of libstdc++ for NuttX
#-cp -dpf $(STAGING_DIR)/lib/libstdc++.so* $(TARGET_DIR)/lib/
endif
ifeq ($(BR2_INSTALL_LIBGCJ),y)
-cp -dpf $(STAGING_DIR)/lib/libgcj.so* $(TARGET_DIR)/lib/
-cp -dpf $(STAGING_DIR)/lib/lib-org-w3c-dom.so* $(TARGET_DIR)/lib/
-cp -dpf $(STAGING_DIR)/lib/lib-org-xml-sax.so* $(TARGET_DIR)/lib/
-mkdir -p $(TARGET_DIR)/usr/lib/security
-cp -dpf $(STAGING_DIR)/usr/lib/security/libgcj.security $(TARGET_DIR)/usr/lib/security/
-cp -dpf $(STAGING_DIR)/usr/lib/security/classpath.security $(TARGET_DIR)/usr/lib/security/
endif
touch $@
gcc: binutils $(LIBFLOAT_TARGET) \
$(GCC_BUILD_DIR)/.installed $(GCC_BUILD_DIR)/.libs_installed \
$(GCC_TARGETS)
gcc-source: $(DL_DIR)/$(GCC_SOURCE)
gcc-clean:
rm -rf $(GCC_BUILD_DIR)
for prog in cpp gcc gcc-[0-9]* protoize unprotoize gcov gccbug cc; do \
rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-$$prog \
rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-$$prog; \
done
gcc-dirclean:
rm -rf $(GCC_BUILD_DIR)
ifeq ($(strip $(BR2_PACKAGE_GCC)),y)
TARGETS += gcc
endif
endif