# # For a description of the syntax of this configuration file, # see misc/tools/kconfig-language.txt. # config NSH_BUILTIN_APPS bool "Enable built-in applications" default y ---help--- Support external registered, "named" applications that can be executed from the NSH command line (see apps/README.txt for more information). menu "Disable Commands" config NSH_DISABLE_CAT bool "Disable cat" default n config NSH_DISABLE_CD bool "Disable cd" default n config NSH_DISABLE_CP bool "Disable cp" default n config NSH_DISABLE_DD bool "Disable dd" default n config NSH_DISABLE_ECHO bool "Disable echo" default n config NSH_DISABLE_EXEC bool "Disable exec" default n config NSH_DISABLE_EXIT bool "Disable exit" default n config NSH_DISABLE_FREE bool "Disable free" default n config NSH_DISABLE_GET bool "Disable get" default n config NSH_DISABLE_HELP bool "Disable help" default n config NSH_DISABLE_IFCONFIG bool "Disable ifconfig" default n config NSH_DISABLE_KILL bool "Disable kill" default n config NSH_DISABLE_LOSETUP bool "Disable losetup" default n config NSH_DISABLE_LS bool "Disable ls" default n config NSH_DISABLE_MB bool "Disable mb" default n config NSH_DISABLE_MKDIR bool "Disable mkdir" default n config NSH_DISABLE_MKFATFS bool "Disable mkfatfs" default n config NSH_DISABLE_MKFIFO bool "Disable mkfifo" default n config NSH_DISABLE_MKRD bool "Disable mkrd" default n config NSH_DISABLE_MH bool "Disable mh" default n config NSH_DISABLE_MOUNT bool "Disable mount" default n config NSH_DISABLE_MW bool "Disable mw" default n config NSH_DISABLE_PS bool "Disable ps" default n config NSH_DISABLE_PING bool "Disable ping" default n config NSH_DISABLE_PUT bool "Disable put" default n config NSH_DISABLE_PWD bool "Disable pwd" default n config NSH_DISABLE_RM bool "Disable rm" default n config NSH_DISABLE_RMDIR bool "Disable rmdir" default n config NSH_DISABLE_SET bool "Disable set" default n config NSH_DISABLE_SH bool "Disable sh" default n config NSH_DISABLE_SLEEP bool "Disable sleep" default n config NSH_DISABLE_TEST bool "Disable test" default n config NSH_DISABLE_UMOUNT bool "Disable umount" default n config NSH_DISABLE_UNSET bool "Disable unset" default n config NSH_DISABLE_USLEEP bool "Disable usleep" default n config NSH_DISABLE_WGET bool "Disable wget" default n config NSH_DISABLE_XD bool "Disable xd" default n endmenu config NSH_FILEIOSIZE int "NSH I/O buffer size" default 1024 ---help--- Size of a static I/O buffer used for file access (ignored if there is no filesystem). Default is 1024. config NSH_STRERROR bool "Use strerror()" default n ---help--- strerror(errno) makes more readable output but strerror() is very large and will not be used unless this setting is 'y' config NSH_LINELEN int "Max command line length" default 80 ---help--- The maximum length of one command line and of one output line. Default: 80 config NSH_NESTDEPTH int "Maximum command nesting" default 3 ---help--- The maximum number of nested if-then[-else]-fi sequences that are permissable. Default: 3 config NSH_DISABLESCRIPT bool "Disable script support" default n ---help--- This can be set to 'y' to suppress support for scripting. This setting disables the 'sh', 'test', and '[' commands and the if-then[-else]-fi construct. This would only be set on systems where a minimal footprint is a necessity and scripting is not. config NSH_DISABLEBG bool "Disable background commands" default n ---help--- This can be set to 'y' to suppress support for background commands. This setting disables the 'nice' command prefix and the '&' command suffix. This would only be set on systems where a minimal footprint is a necessity and background command execution is not. config NSH_MMCSDMINOR int "MMC/SD minor device number" default 0 ---help--- If the architecture supports an MMC/SD slot and if the NSH architecture specific logic is present, this option will provide the MMC/SD minor number, i.e., the MMC/SD block driver will be registered as /dev/mmcsdN where N is the minor number. Default is zero. config NSH_ROMFSETC bool "Support ROMFS start-up script" default n ---help--- Mount a ROMFS filesystem at /etc and provide a startup script at /etc/init.d/rcS. The default startup script will mount a FAT FS RAMDISK at /tmp but the logic is easily extensible. if NSH_ROMFSETC config NSH_ROMFSMOUNTPT string "ROMFS mount point" default "/etc" ---help--- The default mountpoint for the ROMFS volume is /etc, but that can be changed with this setting. This must be a absolute path beginning with '/'. config NSH_INITSCRIPT string "Relative path to startup script" default "init.d/rcS" ---help--- This is the relative path to the startup script within the mountpoint. The default is init.d/rcS. This is a relative path and must not start with '/'. config NSH_ROMFSDEVNO int "ROMFS block device minor number" default 0 ---help--- This is the minor number of the ROMFS block device. The default is '0' corresponding to /dev/ram0. config NSH_ROMFSSECTSIZE int "ROMFS sector size" default 64 ---help--- This is the sector size to use with the ROMFS volume. Since the default volume is very small, this defaults to 64 but should be increased if the ROMFS volume were to be become large. Any value selected must be a power of 2. config NSH_FATDEVNO int "FAT block device minor number" default 0 ---help--- When the default rcS file used when NSH_ROMFSETC is selected, it will mount a FAT FS under /tmp. This is the minor number of the FAT FS block device. The default is '1' corresponding to /dev/ram1. config NSH_FATSECTSIZE int "FAT sector size" default 512 ---help--- When the default rcS file used when NSH_ROMFSETC is selected, it will mount a FAT FS under /tmp. This is the sector size use with the FAT FS. Default is 512. config NSH_FATNSECTORS int "FAT number of sectors" default 1024 ---help--- When the default rcS file used when NSH_ROMFSETC is selected, it will mount a FAT FS under /tmp. This is the number of sectors to use with the FAT FS. Defualt is 1024. The amount of memory used by the FAT FS will be NSH_FATSECTSIZE * NSH_FATNSECTORS bytes. config NSH_FATMOUNTPT string "FAT mount point" default 512 ---help--- When the default rcS file used when NSH_ROMFSETC is selected, it will mount a FAT FS under /tmp. This is the location where the FAT FS will be mounted. Default is /tmp. endif config NSH_CONSOLE bool "Use console" default y ---help--- If NSH_CONSOLE is set to 'y', then a character driver console front-end is selected (/dev/console). Normally, the serial console device is a UART and RS-232 interface. However, if CONFIG_USBDEV is defined, then a USB serial device may, instead, be used if the one of the following are defined: CONFIG_PL2303 and CONFIG_PL2303_CONSOLE - Sets up the Prolifics PL2303 emulation as a console device at /dev/console. CONFIG_CDCACM and CONFIG_CDCACM_CONSOLE - Sets up the CDC/ACM serial device as a console device at dev/console. config NSH_CONDEV bool "Default console device" default "/dev/console" depends on NSH_CONSOLE ---help--- If NSH_CONSOLE is set to 'y', then NSH_CONDEV may also be set to select the serial device used to support the NSH console. This should be set to the quoted name of a readable/write-able character driver such as: NSH_CONDEV="/dev/ttyS1". This is useful, for example, to separate the NSH command line from the system console when the system console is used to provide debug output. Default: stdin and stdout (probably "/dev/console") NOTE: When any other device other than /dev/console is used for a user interface, (1) linefeeds (\n) will not be expanded to carriage return / linefeeds (\r\n). You will need to set your terminal program to account for this. And (2) input is not automatically echoed so you will have to turn local echo on. config NSH_ARCHINIT bool "Have architecture-specific initialization" default n ---help--- Set if your board provides architecture specific initialization via the board-specific function nsh_archinitialize(). This function will be called early in NSH initialization to allow board logic to do such things as configure MMC/SD slots. config NSH_TELNET bool "Use Telnet console" default n depends on NET && NET_TCP ---help--- If NSH_TELNET is set to 'y', then a TELENET server front-end is selected. When this option is provided, you may log into NuttX remotely using telnet in order to access NSH. if NSH_TELNET config NSH_TELNETD_PORT int "Telnet port number" default 23 ---help--- The telnet daemon will listen on this TCP port number for connections. Default: 23 config NSH_TELNETD_DAEMONPRIO int "Telnet daemon priority" default 100 ---help--- Priority of the Telnet daemon. Default: 100 config NSH_TELNETD_DAEMONSTACKSIZE int "Telnet daemon stack size" default 2048 ---help--- Stack size allocated for the Telnet daemon. Default: 2048 config NSH_TELNETD_CLIENTPRIO int "Telnet client priority" default 100 ---help--- Priority of the Telnet client. Default: 100 config NSH_TELNETD_CLIENTSTACKSIZE int "Telnet client stack size" default 2048 ---help--- Stack size allocated for the Telnet client. Default: 2048 config NSH_IOBUFFER_SIZE int "Telnet I/O buffer size" default 512 ---help--- Determines the size of the I/O buffer to use for sending/ receiving TELNET commands/reponses. Default: 512 endif config NSH_DHCPC bool "Use DHCP to get IP address" default n depends on NET && NET_UDP && NET_BROADCAST ---help--- Obtain the IP address via DHCP. Per RFC2131 (p. 9), the DHCP client must be prepared to receive DHCP messages of up to 576 bytes (excluding Ethernet, IP, or UDP headers and FCS). if !NSH_DHCPC config NSH_IPADDR hex "Target IP address" default 0x10000002 ---help--- If NSH_DHCPC is NOT set, then the static IP address must be provided. This is a 32-bit integer value in host order. So, as an example, 0x10000002 would be 10.0.0.2. config NSH_DRIPADDR hex "Router IP address" default 0x10000001 ---help--- Default router IP address (aka, Gateway). This is a 32-bit integer value in host order. So, as an example, 0x10000001 would be 10.0.0.1. config NSH_NETMASK hex "Network mask" default 0xffffff00 ---help--- Network mask. This is a 32-bit integer value in host order. So, as an example, 0xffffff00 would be 255.255.255.0. endif config NSH_NOMAC bool "Hardware has no MAC address" default n depends on NET ---help--- Set if your ethernet hardware has no built-in MAC address. If set, a bogus MAC will be assigned.