############################################################################ # sim/nx/defconfig # # Copyright (C) 2008-2010, 2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # 3. Neither the name NuttX nor the names of its contributors may be # used to endorse or promote products derived from this software # without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS # OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # ############################################################################ # # Architecture selection # # CONFIG_ARCH - identifies the arch subdirectory and, hence, the # processor architecture. # CONFIG_ARCH_name - for use in C code. This identifies the particular # processor architecture (CONFIG_ARCH_SIM). # CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, # the board that supports the particular chip or SoC. # CONFIG_ARCH_BOARD_name - for use in C code # CONFIG_ENDIAN_BIG - define if big endian (default is little endian) # CONFIG_ARCH=sim CONFIG_ARCH_SIM=y CONFIG_ARCH_BOARD=sim CONFIG_ARCH_BOARD_SIM=y # # Simulated framebuffer configuration # CONFIG_SIM_X11FB=n CONFIG_SIM_FBWIDTH=480 CONFIG_SIM_FBHEIGHT=240 CONFIG_SIM_FBBPP=8 # # General OS setup # # CONFIG_APPS_DIR - Identifies the relative path to the directory # that builds the application to link with NuttX. Default: ../apps # CONFIG_DEBUG - enables built-in debug options # CONFIG_DEBUG_VERBOSE - enables verbose debug output # CONFIG_DEBUG_SYMBOLS - build without optimization and with # debug symbols (needed for use with a debugger). # CONFIG_HAVE_CXX - Enable support for C++ # CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support # for initialization of static C++ instances for this architecture # and for the selected toolchain (via up_cxxinitialize()). # CONFIG_MM_REGIONS - If the architecture includes multiple # regions of memory to allocate from, this specifies the # number of memory regions that the memory manager must # handle and enables the API mm_addregion(start, end); # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot # time console output # CONFIG_MSEC_PER_TICK - The default system timer is 100Hz # or MSEC_PER_TICK=10. This setting may be defined to # inform NuttX that the processor hardware is providing # system timer interrupts at some interrupt interval other # than 10 msec. # CONFIG_RR_INTERVAL - The round robin timeslice will be set # this number of milliseconds; Round robin scheduling can # be disabled by setting this value to zero. # CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in # scheduler to monitor system performance # CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a # task name to save in the TCB. Useful if scheduler # instrumentation is selected. Set to zero to disable. # CONFIG_JULIAN_TIME - Enables Julian time conversions # CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - # Used to initialize the internal time logic. # CONFIG_DEV_CONSOLE - Set if architecture-specific logic # provides /dev/console. Enables stdout, stderr, stdin. # CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console # driver (minimul support) # CONFIG_MUTEX_TYPES: Set to enable support for recursive and # errorcheck mutexes. Enables pthread_mutexattr_settype(). # CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority # inheritance on mutexes and semaphores. # CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority # inheritance is enabled. It defines the maximum number of # different threads (minus one) that can take counts on a # semaphore with priority inheritance support. This may be # set to zero if priority inheritance is disabled OR if you # are only using semaphores as mutexes (only one holder) OR # if no more than two threads participate using a counting # semaphore. # CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, # then this setting is the maximum number of higher priority # threads (minus 1) than can be waiting for another thread # to release a count on a semaphore. This value may be set # to zero if no more than one thread is expected to wait for # a semaphore. # CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors # by task_create() when a new task is started. If set, all # files/drivers will appear to be closed in the new task. # CONFIG_FDCLONE_STDIO. Disable cloning of all but the first # three file descriptors (stdin, stdout, stderr) by task_create() # when a new task is started. If set, all files/drivers will # appear to be closed in the new task except for stdin, stdout, # and stderr. # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. # #CONFIG_APPS_DIR= CONFIG_DEBUG=y CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_SYMBOLS=n CONFIG_DEBUG_GRAPHICS=y CONFIG_HAVE_CXX=n CONFIG_HAVE_CXXINITIALIZE=n CONFIG_MM_REGIONS=1 CONFIG_ARCH_LOWPUTC=y CONFIG_RR_INTERVAL=0 CONFIG_SCHED_INSTRUMENTATION=n CONFIG_TASK_NAME_SIZE=32 CONFIG_START_YEAR=2008 CONFIG_START_MONTH=11 CONFIG_START_DAY=28 CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y CONFIG_DEV_LOWCONSOLE=n CONFIG_MUTEX_TYPES=n CONFIG_PRIORITY_INHERITANCE=n CONFIG_SEM_PREALLOCHOLDERS=0 CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y # # The following can be used to disable categories of # APIs supported by the OS. If the compiler supports # weak functions, then it should not be necessary to # disable functions unless you want to restrict usage # of those APIs. # # There are certain dependency relationships in these # features. # # o mq_notify logic depends on signals to awaken tasks # waiting for queues to become full or empty. # o pthread_condtimedwait() depends on signals to wake # up waiting tasks. # CONFIG_DISABLE_CLOCK=n CONFIG_DISABLE_POSIX_TIMERS=y CONFIG_DISABLE_PTHREAD=n CONFIG_DISABLE_SIGNALS=n CONFIG_DISABLE_MQUEUE=n CONFIG_DISABLE_MOUNTPOINT=y CONFIG_DISABLE_ENVIRON=y CONFIG_DISABLE_POLL=y # # Misc libc settings # # CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a # little smaller if we do not support fieldwidthes # CONFIG_NOPRINTF_FIELDWIDTH=n # # Allow for architecture optimized implementations # # The architecture can provide optimized versions of the # following to improve sysem performance # CONFIG_ARCH_MEMCPY=n CONFIG_ARCH_MEMCMP=n CONFIG_ARCH_MEMMOVE=n CONFIG_ARCH_MEMSET=n CONFIG_ARCH_STRCMP=n CONFIG_ARCH_STRCPY=n CONFIG_ARCH_STRNCPY=n CONFIG_ARCH_STRLEN=n CONFIG_ARCH_STRNLEN=n CONFIG_ARCH_BZERO=n # # General build options # # CONFIG_RRLOAD_BINARY - make the rrload binary format used with # BSPs from www.ridgerun.com using the tools/mkimage.sh script # CONFIG_INTELHEX_BINARY - make the Intel HEX binary format # used with many different loaders using the GNU objcopy program # Should not be selected if you are not using the GNU toolchain. # CONFIG_RAW_BINARY - make a raw binary format file used with many # different loaders using the GNU objcopy program. This option # should not be selected if you are not using the GNU toolchain. # CONFIG_HAVE_LIBM - toolchain supports libm.a # CONFIG_RRLOAD_BINARY=n CONFIG_INTELHEX_BINARY=n CONFIG_RAW_BINARY=n CONFIG_HAVE_LIBM=y # # Sizes of configurable things (0 disables) # # CONFIG_MAX_TASKS - The maximum number of simultaneously # active tasks. This value must be a power of two. # CONFIG_MAX_TASK_ARGS - This controls the maximum number of # of parameters that a task may receive (i.e., maxmum value # of 'argc') # CONFIG_NPTHREAD_KEYS - The number of items of thread- # specific data that can be retained # CONFIG_NFILE_DESCRIPTORS - The maximum number of file # descriptors (one for each open) # CONFIG_NFILE_STREAMS - The maximum number of streams that # can be fopen'ed # CONFIG_NAME_MAX - The maximum size of a file name. # CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate # on fopen. (Only if CONFIG_NFILE_STREAMS > 0) # CONFIG_NUNGET_CHARS - Number of characters that can be # buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) # CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message # structures. The system manages a pool of preallocated # message structures to minimize dynamic allocations # CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with # a fixed payload size given by this settin (does not include # other message structure overhead. # CONFIG_MAX_WDOGPARMS - Maximum number of parameters that # can be passed to a watchdog handler # CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog # structures. The system manages a pool of preallocated # watchdog structures to minimize dynamic allocations # CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX # timer structures. The system manages a pool of preallocated # timer structures to minimize dynamic allocations. Set to # zero for all dynamic allocations. # CONFIG_MAX_TASKS=16 CONFIG_MAX_TASK_ARGS=4 CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=16 CONFIG_NFILE_STREAMS=16 CONFIG_NAME_MAX=32 CONFIG_STDIO_BUFFER_SIZE=1024 CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=32 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=4 CONFIG_PREALLOC_WDOGS=32 CONFIG_PREALLOC_TIMERS=8 # # Framebuffer driver options # CONFIG_FB_CMAP=n CONFIG_FB_HWCURSOR=n CONFIG_FB_HWCURSORIMAGE=n #CONFIG_FB_HWCURSORSIZE #CONFIG_FB_TRANSPARENCY # # FAT filesystem configuration # # CONFIG_FS_FAT - Enable FAT filesystem support # CONFIG_FAT_SECTORSIZE - Max supported sector size # CONFIG_FS_ROMFS - Enable ROMFS filesystem support # CONFIG_FS_FAT=n CONFIG_FS_ROMFS=n # # TCP/IP and UDP support via uIP # # CONFIG_NET - Enable or disable all network features # CONFIG_NET_IPv6 - Build in support for IPv6 # CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. # CONFIG_NET_SOCKOPTS - Enable or disable support for socket options # CONFIG_NET_BUFSIZE - uIP buffer size # CONFIG_NET_TCP - TCP support on or off # CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) # CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers # CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) # CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until # accept() is called. The size of the backlog is selected when listen() is called. # CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) # CONFIG_NET_UDP - UDP support on or off # CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off # CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections # CONFIG_NET_ICMP - ICMP ping response support on or off # CONFIG_NET_ICMP_PING - ICMP ping request support on or off # CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address # CONFIG_NET_STATISTICS - uIP statistics on or off # CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window # CONFIG_NET_ARPTAB_SIZE - The size of the ARP table # CONFIG_NET_BROADCAST - Broadcast support # CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates # CONFIG_NET=n CONFIG_NET_IPv6=n CONFIG_NSOCKET_DESCRIPTORS=0 CONFIG_NET_SOCKOPTS=y CONFIG_NET_BUFSIZE=420 CONFIG_NET_TCP=n CONFIG_NET_TCP_CONNS=40 CONFIG_NET_MAX_LISTENPORTS=40 CONFIG_NET_UDP=n CONFIG_NET_UDP_CHECKSUMS=y #CONFIG_NET_UDP_CONNS=10 CONFIG_NET_ICMP=n CONFIG_NET_ICMP_PING=n #CONFIG_NET_PINGADDRCONF=0 CONFIG_NET_STATISTICS=y #CONFIG_NET_RECEIVE_WINDOW= #CONFIG_NET_ARPTAB_SIZE=8 CONFIG_NET_BROADCAST=n #CONFIG_NET_FWCACHE_SIZE=2 # # UIP Network Utilities # # CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP # CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries # CONFIG_NET_DHCP_LIGHT=n CONFIG_NET_RESOLV_ENTRIES=4 # # Graphics related configuration settings # # CONFIG_NX # Enables overall support for graphics library and NX # CONFIG_NX_MULTIUSER # Configures NX in multi-user mode # CONFIG_NX_NPLANES # Some YUV color formats requires support for multiple planes, # one for each color component. Unless you have such special # hardware, this value should be undefined or set to 1 # CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP, # CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP, # CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and # CONFIG_NX_DISABLE_32BPP # NX supports a variety of pixel depths. You can save some # memory by disabling support for unused color depths. # CONFIG_NX_PACKEDMSFIRST # If a pixel depth of less than 8-bits is used, then NX needs # to know if the pixels pack from the MS to LS or from LS to MS # CONFIG_NX_MOUSE # Build in support for mouse input # CONFIG_NX_KBD # Build in support of keypad/keyboard input # CONFIG_NXTK_BORDERWIDTH # Specifies with with of the border (in pixels) used with # framed windows. The default is 4. # CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2 # Specify the colors of the border used with framed windows. # CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so # is normally darker. The default is medium and dark grey, # respectively # CONFIG_NXTK_AUTORAISE # If set, a window will be raised to the top if the mouse position # is over a visible portion of the window. Default: A mouse # button must be clicked over a visible portion of the window. # CONFIG_NXFONTS_CHARBITS # The number of bits in the character set. Current options are # only 7 and 8. The default is 7. # CONFIG_NXFONT_SANS23X27 # At present, there is only one font. But if there were were more, # then this option would select the sans serif font. # # NX Multi-user only options: # # CONFIG_NX_BLOCKING # Open the client message queues in blocking mode. In this case, # nx_eventhandler() will not return until a message is received and processed. # CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS # Specifies the maximum number of messages that can fit in # the message queues. No additional resources are allocated, but # this can be set to prevent flooding of the client or server with # too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many # messages are pre-allocated). # CONFIG_NX=y CONFIG_NX_MULTIUSER=n CONFIG_NX_NPLANES=1 CONFIG_NX_DISABLE_1BPP=y CONFIG_NX_DISABLE_2BPP=y CONFIG_NX_DISABLE_4BPP=y CONFIG_NX_DISABLE_8BPP=n CONFIG_NX_DISABLE_16BPP=y CONFIG_NX_DISABLE_24BPP=y CONFIG_NX_DISABLE_32BPP=y CONFIG_NX_PACKEDMSFIRST=n CONFIG_NX_MOUSE=y CONFIG_NX_KBD=y #CONFIG_NXTK_BORDERWIDTH=4 #CONFIG_NXTK_BORDERCOLOR1 #CONFIG_NXTK_BORDERCOLOR2 CONFIG_NXTK_AUTORAISE=n CONFIG_NXFONT_SANS23X27=y CONFIG_NXFONTS_CHARBITS=7 CONFIG_NX_BLOCKING=y CONFIG_NX_MXSERVERMSGS=32 CONFIG_NX_MXCLIENTMSGS=16 # # NxConsole Configuration Settings: # # CONFIG_NXCONSOLE # Enables building of the NxConsole driver. # CONFIG_NXCONSOLE_BPP # Currently, NxConsole supports only a single pixel depth. This # configuration setting must be provided to support that single pixel depth. # Default: The smallest enabled pixel depth. (see CONFIG_NX_DISABLE_*BPP) # CONFIG_NXCONSOLE_NOGETRUN # NxConsole needs to know if it can read from the LCD or not. If reading # from the LCD is supported, then NxConsole can do more efficient # scrolling. Default: Supported # CONFIG_NXCONSOLE_MXCHARS # NxConsole needs to remember every character written to the console so # that it can redraw the window. This setting determines the size of some # internal memory allocations used to hold the character data. Default: 128. # CONFIG_NXCONSOLE_CACHESIZE # NxConsole supports caching of rendered fonts. This font caching is required # for two reasons: (1) First, it improves text performance, but more # importantly (2) it preserves the font memory. Since the NX server runs on # a separate server thread, it requires that the rendered font memory persist # until the server has a chance to render the font. (NOTE: There is still # inherently a race condition in this!). Unfortunately, the font cache would # be quite large if all fonts were saved. The CONFIG_NXCONSOLE_CACHESIZE setting # will control the size of the font cache (in number of glyphs). Only that # number of the most recently used glyphs will be retained. Default: 16. # CONFIG_NXCONSOLE_LINESEPARATION # This the space (in rows) between each row of test. Default: 2 # CONFIG_NXCONSOLE_NOWRAP # By default, lines will wrap when the test reaches the right hand side # of the window. This setting can be defining to change this behavior so # that the text is simply truncated until a new line is encountered. # CONFIG_NXCONSOLE=n CONFIG_NXCONSOLE_BPP=8 # CONFIG_NXCONSOLE_NOGETRUN CONFIG_NXCONSOLE_MXCHARS=256 # CONFIG_NXCONSOLE_CACHESIZE # CONFIG_NXCONSOLE_LINESEPARATION # CONFIG_NXCONSOLE_NOWRAP # # Settings for examples/uip # CONFIG_EXAMPLE_UIP_IPADDR=(192<<24|168<<16|0<<8|128) CONFIG_EXAMPLE_UIP_DRIPADDR=(192<<24|168<<16|0<<8|1) CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_EXAMPLE_UIP_DHCPC=n # # Settings for examples/nettest # CONFIG_EXAMPLE_NETTEST_SERVER=n CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n CONFIG_EXAMPLE_NETTEST_NOMAC=n CONFIG_EXAMPLE_NETTEST_IPADDR=(192<<24|168<<16|0<<8|128) CONFIG_EXAMPLE_NETTEST_DRIPADDR=(192<<24|168<<16|0<<8|1) CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_EXAMPLE_NETTEST_CLIENTIP=(192<<24|168<<16|0<<8|106) # # Settings for examples/ostest # CONFIG_EXAMPLES_OSTEST_LOOPS=100 CONFIG_EXAMPLES_OSTEST_STACKSIZE=8192 # # Settings for apps/nshlib # # CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer # CONFIG_NSH_STRERROR - Use strerror(errno) # CONFIG_NSH_LINELEN - Maximum length of one command line # CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi # CONFIG_NSH_DISABLESCRIPT - Disable scripting support # CONFIG_NSH_DISABLEBG - Disable background commands # CONFIG_NSH_ROMFSETC - Use startup script in /etc # CONFIG_NSH_CONSOLE - Use serial console front end # CONFIG_NSH_TELNET - Use telnetd console front end # # If CONFIG_NSH_TELNET is selected: # CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size # CONFIG_NSH_DHCPC - Obtain address using DHCP # CONFIG_NSH_IPADDR - Provides static IP address # CONFIG_NSH_DRIPADDR - Provides static router IP address # CONFIG_NSH_NETMASK - Provides static network mask # CONFIG_NSH_NOMAC - Use a bogus MAC address # # If CONFIG_NSH_ROMFSETC is selected: # CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint # CONFIG_NSH_INITSCRIPT - Relative path to init script # CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor # CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size # CONFIG_NSH_FATDEVNO - FAT FS RAM device minor # CONFIG_NSH_FATSECTSIZE - FAT FS sector size # CONFIG_NSH_FATNSECTORS - FAT FS number of sectors # CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint # CONFIG_NSH_FILEIOSIZE=1024 CONFIG_NSH_STRERROR=n CONFIG_NSH_LINELEN=80 CONFIG_NSH_NESTDEPTH=3 CONFIG_NSH_DISABLESCRIPT=n CONFIG_NSH_DISABLEBG=n CONFIG_NSH_ROMFSETC=y CONFIG_NSH_CONSOLE=y CONFIG_NSH_TELNET=n CONFIG_NSH_IOBUFFER_SIZE=512 CONFIG_NSH_DHCPC=n CONFIG_NSH_NOMAC=n CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) CONFIG_NSH_ROMFSMOUNTPT="/etc" CONFIG_NSH_INITSCRIPT="init.d/rcS" CONFIG_NSH_ROMFSDEVNO=1 CONFIG_NSH_ROMFSSECTSIZE=64 CONFIG_NSH_FATDEVNO=2 CONFIG_NSH_FATSECTSIZE=512 CONFIG_NSH_FATNSECTORS=1024 CONFIG_NSH_FATMOUNTPT=/tmp # # Settings for examples/nx # # CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame- # buffer driver for use in the test. Default: 0 # CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on # CONFIG_EXAMPLES_NX_BPP. # CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on # CONFIG_EXAMPLES_NX_BPP. # CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on # CONFIG_EXAMPLES_NX_BPP. # CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on # CONFIG_EXAMPLES_NX_BPP. # CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on # CONFIG_EXAMPLES_NX_BPP. # CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options # include 2, 4, 8, 16, 24, and 32. Default is 32. # CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to # use pretty, framed NXTK windows with toolbars. # CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating # the NX server. Default 2048 # CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 80 # CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120 # CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with # nx_eventnotify(). Default: 4 CONFIG_EXAMPLES_NX_VPLANE=0 #CONFIG_EXAMPLES_NX_BGCOLOR #CONFIG_EXAMPLES_NX_COLOR1 #CONFIG_EXAMPLES_NX_COLOR2 #CONFIG_EXAMPLES_NX_TBCOLOR #CONFIG_EXAMPLES_NX_FONTCOLOR CONFIG_EXAMPLES_NX_BPP=CONFIG_SIM_FBBPP CONFIG_EXAMPLES_NX_RAWWINDOWS=n CONFIG_EXAMPLES_NX_STACKSIZE=8192 CONFIG_EXAMPLES_NX_CLIENTPRIO=80 CONFIG_EXAMPLES_NX_SERVERPRIO=120 CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4 # # Settings for examples/nxlines # # CONFIG_EXAMPLES_NXLINES_BUILTIN -- Build the NXLINES example as a "built-in" # that can be executed from the NSH command line # CONFIG_EXAMPLES_NXLINES_VPLANE -- The plane to select from the frame- # buffer driver for use in the test. Default: 0 # CONFIG_EXAMPLES_NXLINES_DEVNO - The LCD device to select from the LCD # driver for use in the test: Default: 0 # CONFIG_EXAMPLES_NXLINES_BGCOLOR -- The color of the background. Default # depends on CONFIG_EXAMPLES_NXLINES_BPP. # CONFIG_EXAMPLES_NXLINES_LINEWIDTH - Selects the width of the lines in # pixels (default: 16) # CONFIG_EXAMPLES_NXLINES_LINECOLOR -- The color of the central lines drawn # in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP # (there really is no meaningful default). # CONFIG_EXAMPLES_NXLINES_BORDERWIDTH -- The width of the circular border # drawn in the background window. (default: 4). # CONFIG_EXAMPLES_NXLINES_BORDERCOLOR -- The color of the circular border # drawn in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP # (there really is no meaningful default). # CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR -- The color of the circular region # filled in the background window. Default depends on CONFIG_EXAMPLES_NXLINES_BPP # (there really is no meaningful default). # CONFIG_EXAMPLES_NXLINES_BPP -- Pixels per pixel to use. Valid options # include 2, 4, 8, 16, 24, and 32. Default is 16. # CONFIG_EXAMPLES_NXLINES_EXTERNINIT - The driver for the graphics device on # this platform requires some unusual initialization. This is the # for, for example, SPI LCD/OLED devices. If this configuration is # selected, then the platform code must provide an LCD initialization # function. # CONFIG_EXAMPLES_NXLINES_BUILTIN=n CONFIG_EXAMPLES_NXLINES_VPLANE=0 CONFIG_EXAMPLES_NXLINES_DEVNO=0 #CONFIG_EXAMPLES_NXLINES_BGCOLOR= CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16 #CONFIG_EXAMPLES_NXLINES_LINECOLOR= CONFIG_EXAMPLES_NXLINES_BPP=CONFIG_SIM_FBBPP CONFIG_EXAMPLES_NXLINES_EXTERNINIT=n # # Settings for examples/mount # CONFIG_EXAMPLES_MOUNT_DEVNAME="/dev/ram0" #CONFIG_EXAMPLES_MOUNT_NSECTORS=2048 #CONFIG_EXAMPLES_MOUNT_SECTORSIZE=512 #CONFIG_EXAMPLES_MOUNT_RAMDEVNO=1 # # Stack and heap information # # CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP # operation from FLASH but must copy initialized .data sections to RAM. # CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH # but copy themselves entirely into RAM for better performance. # CONFIG_CUSTOM_STACK - The up_ implementation will handle # all stack operations outside of the nuttx model. # CONFIG_STACK_POINTER - The initial stack pointer # CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. # This is the thread that (1) performs the inital boot of the system up # to the point where user_start() is spawned, and (2) there after is the # IDLE thread that executes only when there is no other thread ready to # run. # CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate # for the main user thread that begins at the user_start() entry point. # CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size # CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size # CONFIG_HEAP_BASE - The beginning of the heap # CONFIG_HEAP_SIZE - The size of the heap # CONFIG_BOOT_RUNFROMFLASH=n CONFIG_BOOT_COPYTORAM=n CONFIG_CUSTOM_STACK=n CONFIG_IDLETHREAD_STACKSIZE=4096 CONFIG_USERMAIN_STACKSIZE=4096 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=8192 CONFIG_HEAP_BASE= CONFIG_HEAP_SIZE=