# Main state, i.e. what user wants. Controlled by RC or from ground station via telemetry link. uint8 MAIN_STATE_MANUAL = 0 uint8 MAIN_STATE_ALTCTL = 1 uint8 MAIN_STATE_POSCTL = 2 uint8 MAIN_STATE_AUTO_MISSION = 3 uint8 MAIN_STATE_AUTO_LOITER = 4 uint8 MAIN_STATE_AUTO_RTL = 5 uint8 MAIN_STATE_ACRO = 6 uint8 MAIN_STATE_OFFBOARD = 7 uint8 MAIN_STATE_STAB = 8 uint8 MAIN_STATE_MAX = 9 # If you change the order, add or remove arming_state_t states make sure to update the arrays # in state_machine_helper.cpp as well. uint8 ARMING_STATE_INIT = 0 uint8 ARMING_STATE_STANDBY = 1 uint8 ARMING_STATE_ARMED = 2 uint8 ARMING_STATE_ARMED_ERROR = 3 uint8 ARMING_STATE_STANDBY_ERROR = 4 uint8 ARMING_STATE_REBOOT = 5 uint8 ARMING_STATE_IN_AIR_RESTORE = 6 uint8 ARMING_STATE_MAX = 7 uint8 HIL_STATE_OFF = 0 uint8 HIL_STATE_ON = 1 # Navigation state, i.e. "what should vehicle do". uint8 NAVIGATION_STATE_MANUAL = 0 # Manual mode uint8 NAVIGATION_STATE_ALTCTL = 1 # Altitude control mode uint8 NAVIGATION_STATE_POSCTL = 2 # Position control mode uint8 NAVIGATION_STATE_AUTO_MISSION = 3 # Auto mission mode uint8 NAVIGATION_STATE_AUTO_LOITER = 4 # Auto loiter mode uint8 NAVIGATION_STATE_AUTO_RTL = 5 # Auto return to launch mode uint8 NAVIGATION_STATE_AUTO_RCRECOVER = 6 # RC recover mode uint8 NAVIGATION_STATE_AUTO_RTGS = 7 # Auto return to groundstation on data link loss uint8 NAVIGATION_STATE_AUTO_LANDENGFAIL = 8 # Auto land on engine failure uint8 NAVIGATION_STATE_AUTO_LANDGPSFAIL = 9 # Auto land on gps failure (e.g. open loop loiter down) uint8 NAVIGATION_STATE_ACRO = 10 # Acro mode uint8 NAVIGATION_STATE_LAND = 11 # Land mode uint8 NAVIGATION_STATE_DESCEND = 12 # Descend mode (no position control) uint8 NAVIGATION_STATE_TERMINATION = 13 # Termination mode uint8 NAVIGATION_STATE_OFFBOARD = 14 uint8 NAVIGATION_STATE_STAB = 15 # Stabilized mode uint8 NAVIGATION_STATE_MAX = 16 # VEHICLE_MODE_FLAG, same as MAV_MODE_FLAG of MAVLink 1.0 protocol uint8 VEHICLE_MODE_FLAG_SAFETY_ARMED = 128 uint8 VEHICLE_MODE_FLAG_MANUAL_INPUT_ENABLED = 64 uint8 VEHICLE_MODE_FLAG_HIL_ENABLED = 32 uint8 VEHICLE_MODE_FLAG_STABILIZED_ENABLED = 16 uint8 VEHICLE_MODE_FLAG_GUIDED_ENABLED = 8 uint8 VEHICLE_MODE_FLAG_AUTO_ENABLED = 4 uint8 VEHICLE_MODE_FLAG_TEST_ENABLED = 2 uint8 VEHICLE_MODE_FLAG_CUSTOM_MODE_ENABLED = 1 # VEHICLE_TYPE, should match 1:1 MAVLink's MAV_TYPE ENUM uint8 VEHICLE_TYPE_GENERIC = 0 # Generic micro air vehicle. uint8 VEHICLE_TYPE_FIXED_WING = 1 # Fixed wing aircraft. uint8 VEHICLE_TYPE_QUADROTOR = 2 # Quadrotor uint8 VEHICLE_TYPE_COAXIAL = 3 # Coaxial helicopter uint8 VEHICLE_TYPE_HELICOPTER = 4 # Normal helicopter with tail rotor. uint8 VEHICLE_TYPE_ANTENNA_TRACKER = 5 # Ground installation uint8 VEHICLE_TYPE_GCS = 6 # Operator control unit / ground control station uint8 VEHICLE_TYPE_AIRSHIP = 7 # Airship, controlled uint8 VEHICLE_TYPE_FREE_BALLOON = 8 # Free balloon, uncontrolled uint8 VEHICLE_TYPE_ROCKET = 9 # Rocket uint8 VEHICLE_TYPE_GROUND_ROVER = 10 # Ground rover uint8 VEHICLE_TYPE_SURFACE_BOAT = 11 # Surface vessel, boat, ship uint8 VEHICLE_TYPE_SUBMARINE = 12 # Submarine uint8 VEHICLE_TYPE_HEXAROTOR = 13 # Hexarotor uint8 VEHICLE_TYPE_OCTOROTOR = 14 # Octorotor uint8 VEHICLE_TYPE_TRICOPTER = 15 # Octorotor uint8 VEHICLE_TYPE_FLAPPING_WING = 16 # Flapping wing uint8 VEHICLE_TYPE_KITE = 17 # Kite uint8 VEHICLE_TYPE_ONBOARD_CONTROLLER=18 # Onboard companion controller uint8 VEHICLE_TYPE_VTOL_DUOROTOR = 19 # Vtol with two engines uint8 VEHICLE_TYPE_VTOL_QUADROTOR = 20 # Vtol with four engines uint8 VEHICLE_TYPE_VTOL_HEXAROTOR = 21 # Vtol with six engines uint8 VEHICLE_TYPE_VTOL_OCTOROTOR = 22 # Vtol with eight engines uint8 VEHICLE_TYPE_ENUM_END = 23 # VEHICLE_VTOL_STATE, should match 1:1 MAVLinks's MAV_VTOL_STATE uint8 VEHICLE_VTOL_STATE_UNDEFINED = 0 uint8 VEHICLE_VTOL_STATE_TRANSITION_TO_FW = 1 uint8 VEHICLE_VTOL_STATE_TRANSITION_TO_MC = 2 uint8 VEHICLE_VTOL_STATE_MC = 3 uint8 VEHICLE_VTOL_STATE_FW = 4 uint8 VEHICLE_BATTERY_WARNING_NONE = 0 # no battery low voltage warning active uint8 VEHICLE_BATTERY_WARNING_LOW = 1 # warning of low voltage uint8 VEHICLE_BATTERY_WARNING_CRITICAL = 2 # alerting of critical voltage uint8 RC_IN_MODE_DEFAULT = 0 uint8 RC_IN_MODE_OFF = 1 uint8 RC_IN_MODE_GENERATED = 2 # state machine / state of vehicle. # Encodes the complete system state and is set by the commander app. uint16 counter # incremented by the writing thread everytime new data is stored uint64 timestamp # in microseconds since system start, is set whenever the writing thread stores new data uint8 main_state # main state machine uint8 nav_state # set navigation state machine to specified value uint8 arming_state # current arming state uint8 hil_state # current hil state bool failsafe # true if system is in failsafe state bool calibration_enabled # true if current calibrating parts of the system. Also sets the system to ARMING_STATE_INIT. int32 system_type # system type, inspired by MAVLink's VEHICLE_TYPE enum uint32 system_id # system id, inspired by MAVLink's system ID field uint32 component_id # subsystem / component id, inspired by MAVLink's component ID field bool is_rotary_wing # True if system is in rotary wing configuration, so for a VTOL this is only true while flying as a multicopter bool is_vtol # True if the system is VTOL capable bool vtol_fw_permanent_stab # True if vtol should stabilize attitude for fw in manual mode bool in_transition_mode bool condition_battery_voltage_valid bool condition_system_in_air_restore # true if we can restore in mid air bool condition_system_sensors_initialized bool condition_system_returned_to_home bool condition_auto_mission_available bool condition_global_position_valid # set to true by the commander app if the quality of the position estimate is good enough to use it for navigation bool condition_launch_position_valid # indicates a valid launch position bool condition_home_position_valid # indicates a valid home position (a valid home position is not always a valid launch) bool condition_local_position_valid bool condition_local_altitude_valid bool condition_airspeed_valid # set to true by the commander app if there is a valid airspeed measurement available bool condition_landed # true if vehicle is landed, always true if disarmed bool condition_power_input_valid # set if input power is valid float32 avionics_power_rail_voltage # voltage of the avionics power rail bool usb_connected # status of the USB power supply bool rc_signal_found_once bool rc_signal_lost # true if RC reception lost uint64 rc_signal_lost_timestamp # Time at which the RC reception was lost bool rc_signal_lost_cmd # true if RC lost mode is commanded bool rc_input_blocked # set if RC input should be ignored temporarily uint8 rc_input_mode # set to 1 to disable the RC input, 2 to enable manual control to RC in mapping. bool data_link_lost # datalink to GCS lost bool data_link_lost_cmd # datalink to GCS lost mode commanded uint8 data_link_lost_counter # counts unique data link lost events bool engine_failure # Set to true if an engine failure is detected bool engine_failure_cmd # Set to true if an engine failure mode is commanded bool gps_failure # Set to true if a gps failure is detected bool gps_failure_cmd # Set to true if a gps failure mode is commanded bool barometer_failure # Set to true if a barometer failure is detected bool offboard_control_signal_found_once bool offboard_control_signal_lost bool offboard_control_signal_weak uint64 offboard_control_signal_lost_interval # interval in microseconds without an offboard control message bool offboard_control_set_by_command # true if the offboard mode was set by a mavlink command and should not be overridden by RC # see SYS_STATUS mavlink message for the following uint32 onboard_control_sensors_present uint32 onboard_control_sensors_enabled uint32 onboard_control_sensors_health float32 load # processor load from 0 to 1 float32 battery_voltage float32 battery_current float32 battery_remaining float32 battery_discharged_mah uint32 battery_cell_count uint8 battery_warning # current battery warning mode, as defined by VEHICLE_BATTERY_WARNING enum uint16 drop_rate_comm uint16 errors_comm uint16 errors_count1 uint16 errors_count2 uint16 errors_count3 uint16 errors_count4 bool circuit_breaker_engaged_power_check bool circuit_breaker_engaged_airspd_check bool circuit_breaker_engaged_enginefailure_check bool circuit_breaker_engaged_gpsfailure_check