From c1b6fcbb772559f90fc3e01e0244edde9f3b4e2c Mon Sep 17 00:00:00 2001 From: Lorenz Meier Date: Mon, 14 Dec 2015 16:36:42 +0000 Subject: [PATCH] IO config: Revert stack management changes as we saw stack smashing --- nuttx-configs/px4io-v2/nsh/defconfig | 1162 +++++++++++--------------- 1 file changed, 492 insertions(+), 670 deletions(-) diff --git a/nuttx-configs/px4io-v2/nsh/defconfig b/nuttx-configs/px4io-v2/nsh/defconfig index 56892e3f93..a9b8477948 100755 --- a/nuttx-configs/px4io-v2/nsh/defconfig +++ b/nuttx-configs/px4io-v2/nsh/defconfig @@ -1,705 +1,198 @@ +############################################################################ +# configs/px4io/nsh/defconfig # -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration +# Copyright (C) 2012 PX4 Development Team. All rights reserved. +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt # -CONFIG_NUTTX_NEWCONFIG=y - +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: # -# Build Setup +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. # -# CONFIG_EXPERIMENTAL is not set -CONFIG_HOST_LINUX=y -# CONFIG_HOST_OSX is not set -# CONFIG_HOST_WINDOWS is not set -# CONFIG_HOST_OTHER is not set - +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. # -# Build Configuration +############################################################################ # -CONFIG_APPS_DIR="../apps" -# CONFIG_BUILD_2PASS is not set - +# architecture selection # -# Binary Output Formats +# CONFIG_ARCH - identifies the arch subdirectory and, hence, the +# processor architecture. +# CONFIG_ARCH_family - for use in C code. This identifies the +# particular chip family that the architecture is implemented +# in. +# CONFIG_ARCH_architecture - for use in C code. This identifies the +# specific architecture within the chip family. +# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory +# CONFIG_ARCH_CHIP_name - For use in C code +# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, +# the board that supports the particular chip or SoC. +# CONFIG_ARCH_BOARD_name - for use in C code +# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) +# CONFIG_BOARD_LOOPSPERMSEC - for delay loops +# CONFIG_DRAM_SIZE - Describes the installed DRAM. +# CONFIG_DRAM_START - The start address of DRAM (physical) +# CONFIG_ARCH_IRQPRIO - The ST32F100CB supports interrupt prioritization +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. +# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions +# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. +# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. +# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. +# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that +# cause a 100 second delay during boot-up. This 100 second delay +# serves no purpose other than it allows you to calibrate +# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until +# the delay actually is 100 seconds. +# CONFIG_ARCH_DMA - Support DMA initialization # -# CONFIG_RRLOAD_BINARY is not set -# CONFIG_INTELHEX_BINARY is not set -# CONFIG_MOTOROLA_SREC is not set -CONFIG_RAW_BINARY=y - -# -# Customize Header Files -# -# CONFIG_ARCH_STDBOOL_H is not set -CONFIG_ARCH_MATH_H=y -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG is not set -CONFIG_DEBUG_SYMBOLS=y -# -# System Type -# -# CONFIG_ARCH_8051 is not set -CONFIG_ARCH_ARM=y -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RGMP is not set -# CONFIG_ARCH_SH is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set CONFIG_ARCH="arm" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_C5471 is not set -# CONFIG_ARCH_CHIP_CALYPSO is not set -# CONFIG_ARCH_CHIP_DM320 is not set -# CONFIG_ARCH_CHIP_IMX is not set -# CONFIG_ARCH_CHIP_KINETIS is not set -# CONFIG_ARCH_CHIP_KL is not set -# CONFIG_ARCH_CHIP_LM is not set -# CONFIG_ARCH_CHIP_LPC17XX is not set -# CONFIG_ARCH_CHIP_LPC214X is not set -# CONFIG_ARCH_CHIP_LPC2378 is not set -# CONFIG_ARCH_CHIP_LPC31XX is not set -# CONFIG_ARCH_CHIP_LPC43XX is not set -# CONFIG_ARCH_CHIP_NUC1XX is not set -# CONFIG_ARCH_CHIP_SAM34 is not set -CONFIG_ARCH_CHIP_STM32=y -# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_ARM=y CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_FAMILY="armv7-m" CONFIG_ARCH_CHIP="stm32" -# CONFIG_ARMV7M_USEBASEPRI is not set -CONFIG_ARCH_HAVE_CMNVECTOR=y -CONFIG_ARMV7M_CMNVECTOR=y -# CONFIG_ARCH_HAVE_FPU is not set -CONFIG_ARCH_HAVE_MPU=y -# CONFIG_ARMV7M_MPU is not set - -# -# ARMV7M Configuration Options -# -# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set -# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set -# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set -CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y -# CONFIG_ARMV7M_STACKCHECK is not set -CONFIG_SERIAL_TERMIOS=y - -# -# STM32 Configuration Options -# -# CONFIG_ARCH_CHIP_STM32L151C6 is not set -# CONFIG_ARCH_CHIP_STM32L151C8 is not set -# CONFIG_ARCH_CHIP_STM32L151CB is not set -# CONFIG_ARCH_CHIP_STM32L151R6 is not set -# CONFIG_ARCH_CHIP_STM32L151R8 is not set -# CONFIG_ARCH_CHIP_STM32L151RB is not set -# CONFIG_ARCH_CHIP_STM32L151V6 is not set -# CONFIG_ARCH_CHIP_STM32L151V8 is not set -# CONFIG_ARCH_CHIP_STM32L151VB is not set -# CONFIG_ARCH_CHIP_STM32L152C6 is not set -# CONFIG_ARCH_CHIP_STM32L152C8 is not set -# CONFIG_ARCH_CHIP_STM32L152CB is not set -# CONFIG_ARCH_CHIP_STM32L152R6 is not set -# CONFIG_ARCH_CHIP_STM32L152R8 is not set -# CONFIG_ARCH_CHIP_STM32L152RB is not set -# CONFIG_ARCH_CHIP_STM32L152V6 is not set -# CONFIG_ARCH_CHIP_STM32L152V8 is not set -# CONFIG_ARCH_CHIP_STM32L152VB is not set CONFIG_ARCH_CHIP_STM32F100C8=y -# CONFIG_ARCH_CHIP_STM32F100CB is not set -# CONFIG_ARCH_CHIP_STM32F100R8 is not set -# CONFIG_ARCH_CHIP_STM32F100RB is not set -# CONFIG_ARCH_CHIP_STM32F100RC is not set -# CONFIG_ARCH_CHIP_STM32F100RD is not set -# CONFIG_ARCH_CHIP_STM32F100RE is not set -# CONFIG_ARCH_CHIP_STM32F100V8 is not set -# CONFIG_ARCH_CHIP_STM32F100VB is not set -# CONFIG_ARCH_CHIP_STM32F100VC is not set -# CONFIG_ARCH_CHIP_STM32F100VD is not set -# CONFIG_ARCH_CHIP_STM32F100VE is not set -# CONFIG_ARCH_CHIP_STM32F102CB is not set -# CONFIG_ARCH_CHIP_STM32F103C4 is not set -# CONFIG_ARCH_CHIP_STM32F103C8 is not set -# CONFIG_ARCH_CHIP_STM32F103RET6 is not set -# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set -# CONFIG_ARCH_CHIP_STM32F103VET6 is not set -# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set -# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set -# CONFIG_ARCH_CHIP_STM32F107VC is not set -# CONFIG_ARCH_CHIP_STM32F207IG is not set -# CONFIG_ARCH_CHIP_STM32F302CB is not set -# CONFIG_ARCH_CHIP_STM32F302CC is not set -# CONFIG_ARCH_CHIP_STM32F302RB is not set -# CONFIG_ARCH_CHIP_STM32F302RC is not set -# CONFIG_ARCH_CHIP_STM32F302VB is not set -# CONFIG_ARCH_CHIP_STM32F302VC is not set -# CONFIG_ARCH_CHIP_STM32F303CB is not set -# CONFIG_ARCH_CHIP_STM32F303CC is not set -# CONFIG_ARCH_CHIP_STM32F303RB is not set -# CONFIG_ARCH_CHIP_STM32F303RC is not set -# CONFIG_ARCH_CHIP_STM32F303VB is not set -# CONFIG_ARCH_CHIP_STM32F303VC is not set -# CONFIG_ARCH_CHIP_STM32F405RG is not set -# CONFIG_ARCH_CHIP_STM32F405VG is not set -# CONFIG_ARCH_CHIP_STM32F405ZG is not set -# CONFIG_ARCH_CHIP_STM32F407VE is not set -# CONFIG_ARCH_CHIP_STM32F407VG is not set -# CONFIG_ARCH_CHIP_STM32F407ZE is not set -# CONFIG_ARCH_CHIP_STM32F407ZG is not set -# CONFIG_ARCH_CHIP_STM32F407IE is not set -# CONFIG_ARCH_CHIP_STM32F407IG is not set -# CONFIG_ARCH_CHIP_STM32F427V is not set -# CONFIG_ARCH_CHIP_STM32F427Z is not set -# CONFIG_ARCH_CHIP_STM32F427I is not set -# CONFIG_STM32_STM32L15XX is not set -# CONFIG_STM32_ENERGYLITE is not set -CONFIG_STM32_STM32F10XX=y -CONFIG_STM32_VALUELINE=y -# CONFIG_STM32_CONNECTIVITYLINE is not set -# CONFIG_STM32_PERFORMANCELINE is not set -# CONFIG_STM32_HIGHDENSITY is not set -# CONFIG_STM32_MEDIUMDENSITY is not set -# CONFIG_STM32_LOWDENSITY is not set -# CONFIG_STM32_STM32F20XX is not set -# CONFIG_STM32_STM32F30XX is not set -# CONFIG_STM32_STM32F40XX is not set - -# -# STM32 Peripheral Support -# -CONFIG_STM32_ADC1=y -# CONFIG_STM32_BKP is not set -# CONFIG_STM32_CEC is not set -# CONFIG_STM32_CRC is not set -CONFIG_STM32_DMA1=y -# CONFIG_STM32_DAC1 is not set -# CONFIG_STM32_DAC2 is not set -# CONFIG_STM32_I2C1 is not set -# CONFIG_STM32_I2C2 is not set -# CONFIG_STM32_PWR is not set -# CONFIG_STM32_SPI1 is not set -# CONFIG_STM32_TIM1 is not set -# CONFIG_STM32_TIM2 is not set -# CONFIG_STM32_TIM3 is not set -# CONFIG_STM32_TIM4 is not set -# CONFIG_STM32_TIM5 is not set -# CONFIG_STM32_TIM6 is not set -# CONFIG_STM32_TIM7 is not set -# CONFIG_STM32_TIM12 is not set -# CONFIG_STM32_TIM13 is not set -# CONFIG_STM32_TIM14 is not set -# CONFIG_STM32_TIM15 is not set -# CONFIG_STM32_TIM16 is not set -# CONFIG_STM32_TIM17 is not set -CONFIG_STM32_USART1=y -CONFIG_STM32_USART2=y -CONFIG_STM32_USART3=y -# CONFIG_STM32_UART4 is not set -# CONFIG_STM32_UART5 is not set -# CONFIG_STM32_IWDG is not set -# CONFIG_STM32_WWDG is not set -CONFIG_STM32_ADC=y - -# -# Alternate Pin Mapping -# -# CONFIG_STM32_USART1_REMAP is not set -# CONFIG_STM32_USART2_REMAP is not set -CONFIG_STM32_USART3_NO_REMAP=y -# CONFIG_STM32_USART3_FULL_REMAP is not set -# CONFIG_STM32_USART3_PARTIAL_REMAP is not set -# CONFIG_STM32_JTAG_DISABLE is not set -# CONFIG_STM32_JTAG_FULL_ENABLE is not set -# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set -CONFIG_STM32_JTAG_SW_ENABLE=y -# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set -# CONFIG_STM32_FORCEPOWER is not set -# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set -# CONFIG_STM32_DMACAPABLE is not set -CONFIG_STM32_USART=y - -# -# U[S]ART Configuration -# -# CONFIG_USART1_RS485 is not set -# CONFIG_USART2_RS485 is not set -# CONFIG_USART2_RXDMA is not set -# CONFIG_USART3_RS485 is not set -CONFIG_USART3_RXDMA=y -# CONFIG_SERIAL_DISABLE_REORDERING is not set -# CONFIG_STM32_USART_SINGLEWIRE is not set - -# -# USB Host Configuration -# - -# -# USB Device Configuration -# - -# -# External Memory Configuration -# - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -CONFIG_ARCH_DMA=y -CONFIG_ARCH_IRQPRIO=y -# CONFIG_CUSTOM_STACK is not set -# CONFIG_ADDRENV is not set -CONFIG_ARCH_HAVE_VFORK=y -CONFIG_ARCH_STACKDUMP=y -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -CONFIG_ARCH_HAVE_RAMVECTORS=y -# CONFIG_ARCH_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=2000 -# CONFIG_ARCH_CALIBRATION is not set -CONFIG_DRAM_START=0x20000000 -CONFIG_DRAM_SIZE=0x2000 -CONFIG_ARCH_HAVE_INTERRUPTSTACK=y -CONFIG_ARCH_INTERRUPTSTACK=500 - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Board Selection -# CONFIG_ARCH_BOARD="px4io-v2" CONFIG_ARCH_BOARD_PX4IO_V2=y +CONFIG_BOARD_LOOPSPERMSEC=2000 +CONFIG_DRAM_SIZE=0x00002000 +CONFIG_DRAM_START=0x20000000 +CONFIG_ARCH_INTERRUPTSTACK=n +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARCH_BOOTLOADER=n +CONFIG_ARCH_LEDS=n +CONFIG_ARCH_BUTTONS=n +CONFIG_ARCH_CALIBRATION=n +CONFIG_ARCH_DMA=y +CONFIG_ARCH_MATH_H=y + +CONFIG_ARMV7M_CMNVECTOR=y +CONFIG_ARMV7M_STACKCHECK=n +# +# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): +# +# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG +# +# JTAG Enable options: +# +# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) +# but without JNTRST. +# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled +# +CONFIG_STM32_DFU=n +CONFIG_STM32_JTAG_FULL_ENABLE=n +CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n +CONFIG_STM32_JTAG_SW_ENABLE=y # -# Common Board Options +# Individual subsystems can be enabled: # +# AHB: +CONFIG_STM32_DMA1=y +CONFIG_STM32_DMA2=n +CONFIG_STM32_CRC=n +# APB1: +# Timers 2,3 and 4 are owned by the PWM driver +CONFIG_STM32_TIM2=n +CONFIG_STM32_TIM3=n +CONFIG_STM32_TIM4=n +CONFIG_STM32_TIM5=n +CONFIG_STM32_TIM6=n +CONFIG_STM32_TIM7=n +CONFIG_STM32_WWDG=n +CONFIG_STM32_SPI2=n +CONFIG_STM32_USART2=y +CONFIG_STM32_USART3=y +CONFIG_STM32_I2C1=n +CONFIG_STM32_I2C2=n +CONFIG_STM32_BKP=n +CONFIG_STM32_PWR=n +CONFIG_STM32_DAC=n +# APB2: +# We use our own ADC driver, but leave this on for clocking purposes. +CONFIG_STM32_ADC1=y +CONFIG_STM32_ADC2=n +# TIM1 is owned by the HRT +CONFIG_STM32_TIM1=n +CONFIG_STM32_SPI1=n +CONFIG_STM32_TIM8=n +CONFIG_STM32_USART1=y +CONFIG_STM32_ADC3=n + # -# Board-Specific Options +# STM32F100 specific serial device driver settings # - +# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the +# console and ttys0 (default is the USART1). +# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. +# This specific the size of the receive buffer +# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before +# being sent. This specific the size of the transmit buffer +# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be +# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. +# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_USARTn_2STOP - Two stop bits # -# RTOS Features -# -# CONFIG_BOARD_INITIALIZE is not set -CONFIG_MSEC_PER_TICK=1 -CONFIG_RR_INTERVAL=0 -# CONFIG_SCHED_INSTRUMENTATION is not set -CONFIG_TASK_NAME_SIZE=8 -# CONFIG_SCHED_HAVE_PARENT is not set -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=1970 -CONFIG_START_MONTH=1 -CONFIG_START_DAY=1 -CONFIG_DEV_CONSOLE=y -# CONFIG_MUTEX_TYPES is not set -# CONFIG_PRIORITY_INHERITANCE is not set -CONFIG_FDCLONE_DISABLE=y -CONFIG_FDCLONE_STDIO=y -CONFIG_SDCLONE_DISABLE=y -# CONFIG_SCHED_WAITPID is not set -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set -CONFIG_USER_ENTRYPOINT="user_start" -CONFIG_DISABLE_OS_API=y -# CONFIG_DISABLE_CLOCK is not set -CONFIG_DISABLE_POSIX_TIMERS=y -CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=y -CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_ENVIRON=y - -# -# Sizes of configurable things (0 disables) -# -CONFIG_MAX_TASKS=4 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=2 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=0 -CONFIG_NAME_MAX=12 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=0 - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=290 -CONFIG_USERMAIN_STACKSIZE=800 -CONFIG_PTHREAD_STACK_MIN=512 -CONFIG_PTHREAD_STACK_DEFAULT=1024 - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -CONFIG_DEV_NULL=y -# CONFIG_DEV_ZERO is not set -# CONFIG_LOOP is not set -# CONFIG_RAMDISK is not set -# CONFIG_CAN is not set -# CONFIG_PWM is not set -# CONFIG_I2C is not set -CONFIG_ARCH_HAVE_I2CRESET=y -# CONFIG_SPI is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -# CONFIG_ANALOG is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_BCH is not set -# CONFIG_INPUT is not set -# CONFIG_LCD is not set -# CONFIG_MMCSD is not set -# CONFIG_MTD is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -CONFIG_SERIAL=y -# CONFIG_DEV_LOWCONSOLE is not set -# CONFIG_16550_UART is not set -CONFIG_ARCH_HAVE_USART1=y -CONFIG_ARCH_HAVE_USART2=y -CONFIG_ARCH_HAVE_USART3=y -CONFIG_MCU_SERIAL=y +CONFIG_SERIAL_TERMIOS=y CONFIG_STANDARD_SERIAL=y + CONFIG_USART1_SERIAL_CONSOLE=y -# CONFIG_USART2_SERIAL_CONSOLE is not set -# CONFIG_USART3_SERIAL_CONSOLE is not set -# CONFIG_NO_SERIAL_CONSOLE is not set +CONFIG_USART2_SERIAL_CONSOLE=n +CONFIG_USART3_SERIAL_CONSOLE=n -# -# USART1 Configuration -# -CONFIG_USART1_RXBUFSIZE=64 CONFIG_USART1_TXBUFSIZE=64 -CONFIG_USART1_BAUD=115200 -CONFIG_USART1_BITS=8 -CONFIG_USART1_PARITY=0 -CONFIG_USART1_2STOP=0 -# CONFIG_USART1_IFLOWCONTROL is not set -# CONFIG_USART1_OFLOWCONTROL is not set - -# -# USART2 Configuration -# -CONFIG_USART2_RXBUFSIZE=64 CONFIG_USART2_TXBUFSIZE=64 -CONFIG_USART2_BAUD=115200 -CONFIG_USART2_BITS=8 -CONFIG_USART2_PARITY=0 -CONFIG_USART2_2STOP=0 -# CONFIG_USART2_IFLOWCONTROL is not set -# CONFIG_USART2_OFLOWCONTROL is not set - -# -# USART3 Configuration -# -CONFIG_USART3_RXBUFSIZE=64 CONFIG_USART3_TXBUFSIZE=64 + +CONFIG_USART1_RXBUFSIZE=64 +CONFIG_USART2_RXBUFSIZE=64 +CONFIG_USART3_RXBUFSIZE=64 + +CONFIG_USART1_BAUD=115200 +CONFIG_USART2_BAUD=115200 CONFIG_USART3_BAUD=115200 + +CONFIG_USART1_BITS=8 +CONFIG_USART2_BITS=8 CONFIG_USART3_BITS=8 + +CONFIG_USART1_PARITY=0 +CONFIG_USART2_PARITY=0 CONFIG_USART3_PARITY=0 + +CONFIG_USART1_2STOP=0 +CONFIG_USART2_2STOP=0 CONFIG_USART3_2STOP=0 -# CONFIG_USART3_IFLOWCONTROL is not set -# CONFIG_USART3_OFLOWCONTROL is not set -# CONFIG_SERIAL_IFLOWCONTROL is not set -# CONFIG_SERIAL_OFLOWCONTROL is not set -# CONFIG_USBDEV is not set -# CONFIG_USBHOST is not set -# CONFIG_WIRELESS is not set -# -# System Logging Device Options -# - -# -# System Logging -# -# CONFIG_RAMLOG is not set - -# -# Networking Support -# -# CONFIG_NET is not set - -# -# File Systems -# - -# -# File system configuration -# -CONFIG_DISABLE_MOUNTPOINT=y -# CONFIG_FS_RAMMAP is not set - -# -# System Logging -# -# CONFIG_SYSLOG_ENABLE is not set -# CONFIG_SYSLOG is not set - -# -# Graphics Support -# -# CONFIG_NX is not set - -# -# Memory Management -# -# CONFIG_MM_MULTIHEAP is not set -CONFIG_MM_SMALL=y -CONFIG_MM_REGIONS=1 -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Binary Formats -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -CONFIG_BUILTIN=y -# CONFIG_PIC is not set -# CONFIG_SYMTAB_ORDEREDBYNAME is not set - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=32 -# CONFIG_STDIO_LINEBUFFER is not set -CONFIG_NUNGET_CHARS=2 -# CONFIG_NOPRINTF_FIELDWIDTH is not set -# CONFIG_LIBC_FLOATINGPOINT is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set - -# -# Non-standard Library Support -# -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -CONFIG_HAVE_CXX=y -CONFIG_HAVE_CXXINITIALIZE=y -# CONFIG_CXX_NEWLONG is not set - -# -# uClibc++ Standard C++ Library -# -# CONFIG_UCLIBCXX is not set - -# -# Application Configuration -# - -# -# Built-In Applications -# - -# -# Examples -# -# CONFIG_EXAMPLES_BUTTONS is not set -# CONFIG_EXAMPLES_CAN is not set -# CONFIG_EXAMPLES_COMPOSITE is not set -# CONFIG_EXAMPLES_CXXTEST is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HELLOXX is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_LCDRW is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -# CONFIG_EXAMPLES_NSH is not set -# CONFIG_EXAMPLES_NULL is not set -# CONFIG_EXAMPLES_NX is not set -# CONFIG_EXAMPLES_NXCONSOLE is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXFLAT is not set -# CONFIG_EXAMPLES_NXHELLO is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTEXT is not set -# CONFIG_EXAMPLES_OSTEST is not set -# CONFIG_EXAMPLES_PASHELLO is not set -# CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_POLL is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_QENCODER is not set -# CONFIG_EXAMPLES_RGMP is not set -# CONFIG_EXAMPLES_ROMFS is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_THTTPD is not set -# CONFIG_EXAMPLES_TIFF is not set -# CONFIG_EXAMPLES_TOUCHSCREEN is not set -# CONFIG_EXAMPLES_UDP is not set -# CONFIG_EXAMPLES_UIP is not set -# CONFIG_EXAMPLES_USBSERIAL is not set -# CONFIG_EXAMPLES_USBMSC is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set - -# -# Graphics Support -# -# CONFIG_TIFF is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_PCODE is not set - -# -# Network Utilities -# - -# -# Networking Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_DHCPC is not set -# CONFIG_NETUTILS_DHCPD is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_FTPD is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_RESOLV is not set -# CONFIG_NETUTILS_SMTP is not set -# CONFIG_NETUTILS_TELNETD is not set -# CONFIG_NETUTILS_TFTPC is not set -# CONFIG_NETUTILS_THTTPD is not set -# CONFIG_NETUTILS_UIPLIB is not set -# CONFIG_NETUTILS_WEBCLIENT is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# NSH Library -# -# CONFIG_NSH_LIBRARY is not set - -# -# NxWidgets/NxWM -# - -# -# System NSH Add-Ons -# - -# -# Custom Free Memory Command -# -# CONFIG_SYSTEM_FREE is not set - -# -# I2C tool -# - -# -# FLASH Program Installation -# -# CONFIG_SYSTEM_INSTALL is not set - -# -# FLASH Erase-all Command -# - -# -# readline() -# -# CONFIG_SYSTEM_READLINE is not set - -# -# Power Off -# -# CONFIG_SYSTEM_POWEROFF is not set - -# -# RAMTRON -# -# CONFIG_SYSTEM_RAMTRON is not set - -# -# SD Card -# -# CONFIG_SYSTEM_SDCARD is not set - -# -# Sysinfo -# -# CONFIG_SYSTEM_SYSINFO is not set - -# -# USB Monitor -# +CONFIG_USART1_RXDMA=y +SERIAL_HAVE_CONSOLE_DMA=y +# Conflicts with I2C1 DMA +CONFIG_USART2_RXDMA=n +CONFIG_USART3_RXDMA=y # # PX4IO specific driver settings @@ -723,3 +216,332 @@ CONFIG_HAVE_CXXINITIALIZE=y CONFIG_HRT_TIMER=y CONFIG_HRT_PPM=y +# +# General build options +# +# CONFIG_RRLOAD_BINARY - make the rrload binary format used with +# BSPs from www.ridgerun.com using the tools/mkimage.sh script +# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_RAW_BINARY - make a raw binary format file used with many +# different loaders using the GNU objcopy program. This option +# should not be selected if you are not using the GNU toolchain. +# CONFIG_HAVE_LIBM - toolchain supports libm.a +# +CONFIG_RRLOAD_BINARY=n +CONFIG_INTELHEX_BINARY=n +CONFIG_MOTOROLA_SREC=n +CONFIG_RAW_BINARY=y +CONFIG_HAVE_LIBM=n + +# +# General OS setup +# +# CONFIG_APPS_DIR - Identifies the relative path to the directory +# that builds the application to link with NuttX. Default: ../apps +# CONFIG_DEBUG - enables built-in debug options +# CONFIG_DEBUG_VERBOSE - enables verbose debug output +# CONFIG_DEBUG_SYMBOLS - build without optimization and with +# debug symbols (needed for use with a debugger). +# CONFIG_HAVE_CXX - Enable support for C++ +# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support +# for initialization of static C++ instances for this architecture +# and for the selected toolchain (via up_cxxinitialize()). +# CONFIG_MM_REGIONS - If the architecture includes multiple +# regions of memory to allocate from, this specifies the +# number of memory regions that the memory manager must +# handle and enables the API mm_addregion(start, end); +# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot +# time console output +# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz +# or MSEC_PER_TICK=10. This setting may be defined to +# inform NuttX that the processor hardware is providing +# system timer interrupts at some interrupt interval other +# than 10 msec. +# CONFIG_RR_INTERVAL - The round robin timeslice will be set +# this number of milliseconds; Round robin scheduling can +# be disabled by setting this value to zero. +# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in +# scheduler to monitor system performance +# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a +# task name to save in the TCB. Useful if scheduler +# instrumentation is selected. Set to zero to disable. +# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - +# Used to initialize the internal time logic. +# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. +# You would only need this if you are concerned about accurate +# time conversions in the past or in the distant future. +# CONFIG_JULIAN_TIME - Enables Julian time conversions. You +# would only need this if you are concerned about accurate +# time conversion in the distand past. You must also define +# CONFIG_GREGORIAN_TIME in order to use Julian time. +# CONFIG_DEV_CONSOLE - Set if architecture-specific logic +# provides /dev/console. Enables stdout, stderr, stdin. +# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console +# driver (minimul support) +# CONFIG_MUTEX_TYPES: Set to enable support for recursive and +# errorcheck mutexes. Enables pthread_mutexattr_settype(). +# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority +# inheritance on mutexes and semaphores. +# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority +# inheritance is enabled. It defines the maximum number of +# different threads (minus one) that can take counts on a +# semaphore with priority inheritance support. This may be +# set to zero if priority inheritance is disabled OR if you +# are only using semaphores as mutexes (only one holder) OR +# if no more than two threads participate using a counting +# semaphore. +# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, +# then this setting is the maximum number of higher priority +# threads (minus 1) than can be waiting for another thread +# to release a count on a semaphore. This value may be set +# to zero if no more than one thread is expected to wait for +# a semaphore. +# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors +# by task_create() when a new task is started. If set, all +# files/drivers will appear to be closed in the new task. +# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first +# three file descriptors (stdin, stdout, stderr) by task_create() +# when a new task is started. If set, all files/drivers will +# appear to be closed in the new task except for stdin, stdout, +# and stderr. +# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket +# desciptors by task_create() when a new task is started. If +# set, all sockets will appear to be closed in the new task. +# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to +# handle delayed processing from interrupt handlers. This feature +# is required for some drivers but, if there are not complaints, +# can be safely disabled. The worker thread also performs +# garbage collection -- completing any delayed memory deallocations +# from interrupt handlers. If the worker thread is disabled, +# then that clean will be performed by the IDLE thread instead +# (which runs at the lowest of priority and may not be appropriate +# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE +# is enabled, then the following options can also be used: +# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker +# thread. Default: 50 +# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for +# work in units of microseconds. Default: 50*1000 (50 MS). +# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker +# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. +# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up +# the worker thread. Default: 4 +# CONFIG_SCHED_WAITPID - Enable the waitpid() API +# CONFIG_SCHED_ATEXIT - Enabled the atexit() API +# +CONFIG_USER_ENTRYPOINT="user_start" +#CONFIG_APPS_DIR= +CONFIG_DEBUG=n +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_SYMBOLS=y +CONFIG_DEBUG_FS=n +CONFIG_DEBUG_GRAPHICS=n +CONFIG_DEBUG_LCD=n +CONFIG_DEBUG_USB=n +CONFIG_DEBUG_NET=n +CONFIG_DEBUG_RTC=n +CONFIG_DEBUG_ANALOG=n +CONFIG_DEBUG_PWM=n +CONFIG_DEBUG_CAN=n +CONFIG_DEBUG_I2C=n +CONFIG_DEBUG_INPUT=n + +CONFIG_MSEC_PER_TICK=1 +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_MM_REGIONS=1 +CONFIG_MM_SMALL=y +CONFIG_ARCH_LOWPUTC=y +CONFIG_RR_INTERVAL=0 +CONFIG_SCHED_INSTRUMENTATION=n +CONFIG_TASK_NAME_SIZE=8 +CONFIG_START_YEAR=1970 +CONFIG_START_MONTH=1 +CONFIG_START_DAY=1 +CONFIG_GREGORIAN_TIME=n +CONFIG_JULIAN_TIME=n +# this eats ~1KiB of RAM ... work out why +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=n +CONFIG_MUTEX_TYPES=n +CONFIG_PRIORITY_INHERITANCE=n +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=0 +CONFIG_FDCLONE_DISABLE=y +CONFIG_FDCLONE_STDIO=y +CONFIG_SDCLONE_DISABLE=y +CONFIG_SCHED_WORKQUEUE=n +CONFIG_SCHED_WORKPRIORITY=50 +CONFIG_SCHED_WORKPERIOD=50000 +CONFIG_SCHED_WORKSTACKSIZE=1024 +CONFIG_SIG_SIGWORK=4 +CONFIG_SCHED_WAITPID=n +CONFIG_SCHED_ATEXIT=n + +# +# The following can be used to disable categories of +# APIs supported by the OS. If the compiler supports +# weak functions, then it should not be necessary to +# disable functions unless you want to restrict usage +# of those APIs. +# +# There are certain dependency relationships in these +# features. +# +# o mq_notify logic depends on signals to awaken tasks +# waiting for queues to become full or empty. +# o pthread_condtimedwait() depends on signals to wake +# up waiting tasks. +# +CONFIG_DISABLE_CLOCK=n +CONFIG_DISABLE_POSIX_TIMERS=y +CONFIG_DISABLE_PTHREAD=y +CONFIG_DISABLE_SIGNALS=y +CONFIG_DISABLE_MQUEUE=y +CONFIG_DISABLE_MOUNTPOINT=y +CONFIG_DISABLE_ENVIRON=y +CONFIG_DISABLE_POLL=y + +# +# Misc libc settings +# +# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a +# little smaller if we do not support fieldwidthes +# +CONFIG_NOPRINTF_FIELDWIDTH=n + +# +# Allow for architecture optimized implementations +# +# The architecture can provide optimized versions of the +# following to improve system performance +# +CONFIG_ARCH_MEMCPY=n +CONFIG_ARCH_MEMCMP=n +CONFIG_ARCH_MEMMOVE=n +CONFIG_ARCH_MEMSET=n +CONFIG_ARCH_STRCMP=n +CONFIG_ARCH_STRCPY=n +CONFIG_ARCH_STRNCPY=n +CONFIG_ARCH_STRLEN=n +CONFIG_ARCH_STRNLEN=n +CONFIG_ARCH_BZERO=n + +# +# Sizes of configurable things (0 disables) +# +# CONFIG_MAX_TASKS - The maximum number of simultaneously +# active tasks. This value must be a power of two. +# CONFIG_MAX_TASK_ARGS - This controls the maximum number of +# of parameters that a task may receive (i.e., maxmum value +# of 'argc') +# CONFIG_NPTHREAD_KEYS - The number of items of thread- +# specific data that can be retained +# CONFIG_NFILE_DESCRIPTORS - The maximum number of file +# descriptors (one for each open) +# CONFIG_NFILE_STREAMS - The maximum number of streams that +# can be fopen'ed +# CONFIG_NAME_MAX - The maximum size of a file name. +# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate +# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled +# (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added +# to force automatic, line-oriented flushing the output buffer +# for putc(), fputc(), putchar(), puts(), fputs(), printf(), +# fprintf(), and vfprintf(). When a newline is encountered in +# the output string, the output buffer will be flushed. This +# (slightly) increases the NuttX footprint but supports the kind +# of behavior that people expect for printf(). +# CONFIG_NUNGET_CHARS - Number of characters that can be +# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message +# structures. The system manages a pool of preallocated +# message structures to minimize dynamic allocations +# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with +# a fixed payload size given by this settin (does not include +# other message structure overhead. +# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that +# can be passed to a watchdog handler +# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog +# structures. The system manages a pool of preallocated +# watchdog structures to minimize dynamic allocations +# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX +# timer structures. The system manages a pool of preallocated +# timer structures to minimize dynamic allocations. Set to +# zero for all dynamic allocations. +# +CONFIG_MAX_TASKS=4 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=2 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=0 +CONFIG_NAME_MAX=12 +CONFIG_STDIO_BUFFER_SIZE=32 +CONFIG_STDIO_LINEBUFFER=n +CONFIG_NUNGET_CHARS=2 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=0 + + +# +# Settings for apps/nshlib +# +# CONFIG_NSH_BUILTIN_APPS - Support external registered, +# "named" applications that can be executed from the NSH +# command line (see apps/README.txt for more information). +# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer +# CONFIG_NSH_STRERROR - Use strerror(errno) +# CONFIG_NSH_LINELEN - Maximum length of one command line +# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi +# CONFIG_NSH_DISABLESCRIPT - Disable scripting support +# CONFIG_NSH_DISABLEBG - Disable background commands +# CONFIG_NSH_ROMFSETC - Use startup script in /etc +# CONFIG_NSH_CONSOLE - Use serial console front end +# CONFIG_NSH_TELNET - Use telnetd console front end +# CONFIG_NSH_ARCHINIT - Platform provides architecture +# specific initialization (nsh_archinitialize()). +# + +# Disable NSH completely +CONFIG_NSH_CONSOLE=n + +# +# Stack and heap information +# +# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP +# operation from FLASH but must copy initialized .data sections to RAM. +# (should also be =n for the STM3210E-EVAL which always runs from flash) +# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH +# but copy themselves entirely into RAM for better performance. +# CONFIG_CUSTOM_STACK - The up_ implementation will handle +# all stack operations outside of the nuttx model. +# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) +# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. +# This is the thread that (1) performs the inital boot of the system up +# to the point where user_start() is spawned, and (2) there after is the +# IDLE thread that executes only when there is no other thread ready to +# run. +# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate +# for the main user thread that begins at the user_start() entry point. +# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size +# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size +# CONFIG_HEAP_BASE - The beginning of the heap +# CONFIG_HEAP_SIZE - The size of the heap +# +CONFIG_BOOT_RUNFROMFLASH=n +CONFIG_BOOT_COPYTORAM=n +CONFIG_CUSTOM_STACK=n +CONFIG_STACK_POINTER= +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=1200 +CONFIG_PTHREAD_STACK_MIN=512 +CONFIG_PTHREAD_STACK_DEFAULT=1024 +CONFIG_HEAP_BASE= +CONFIG_HEAP_SIZE=