diff --git a/apps/hott_telemetry/hott_telemetry_main.c b/apps/hott_telemetry/hott_telemetry_main.c
index 00b8f8d665..ba08aa3c5e 100644
--- a/apps/hott_telemetry/hott_telemetry_main.c
+++ b/apps/hott_telemetry/hott_telemetry_main.c
@@ -82,8 +82,8 @@ __EXPORT int hott_telemetry_main(int argc, char *argv[]);
  */
 int hott_telemetry_thread_main(int argc, char *argv[]);
 
-static int read_data(int uart);
-static int send_data(int uart, const struct eam_module_msg *msg);
+static int read_data(int uart, int *id);
+static int send_data(int uart, char *buffer, int size);
 static void uart_disable_rx(void);
 static void uart_disable_tx(void);
 static uint32_t get_uart_address(const char *device);
@@ -135,7 +135,7 @@ static int open_uart(const char *uart_name, struct termios *uart_config_original
 	return uart;
 }
 
-int read_data(int uart)
+int read_data(int uart, int *id)
 {
         uart_disable_tx();
 
@@ -148,12 +148,11 @@ int read_data(int uart)
 		read(uart, &mode, 1);
 		
 		/* read the poll ID (device ID being targetted) */
-		char id;
-		read(uart, &id, 1);
+		read(uart, id, 1);
 
-		/* if we have a binary mode request for our sensor ID let's run with it. */
-		if (mode != BINARY_MODE_REQUEST_ID || id != ELECTRIC_AIR_MODULE) {
-			return ERROR;	// not really an error, rather uninteresting.
+		/* if we have a binary mode request */
+		if (mode != BINARY_MODE_REQUEST_ID) {
+			return ERROR;
 		}
 	} else {
 		printf("Timeout\n");
@@ -162,18 +161,13 @@ int read_data(int uart)
 	return OK;
 }
 
-int send_data(int uart, const struct eam_module_msg *msg)
+int send_data(int uart, char *buffer, int size)
 {
 	usleep(POST_READ_DELAY_IN_USECS);
 
 	uart_disable_rx();
 
 	uint16_t checksum = 0;
-  	int size = sizeof(*msg);
-  	char buffer[size];
-
-	memcpy(buffer, msg, size);
-
 	for(int i = 0; i < size; i++) {
 		if (i == size - 1) {
 			/* Set the checksum: the first uint8_t is taken as the checksum. */
@@ -260,11 +254,19 @@ int hott_telemetry_thread_main(int argc, char *argv[])
 
 	messages_init();
 
-	struct eam_module_msg msg;
+	char *buffer;
+	int size = 0;
+	int id = 0;
 	while (!thread_should_exit) {
-		build_eam_response(&msg);
-		if (read_data(uart) == OK) {
-			send_data(uart, &msg);
+		if (read_data(uart, &id) == OK) {
+			switch(id) {
+				case ELECTRIC_AIR_MODULE:
+					build_eam_response(&buffer, &size);
+					break;
+				default:
+					continue;	// Not a module we support.
+			}
+			send_data(uart, buffer, size);
 		}
 	}
 
diff --git a/apps/hott_telemetry/messages.c b/apps/hott_telemetry/messages.c
index eee78a01e8..1ce103b125 100644
--- a/apps/hott_telemetry/messages.c
+++ b/apps/hott_telemetry/messages.c
@@ -51,25 +51,32 @@ void messages_init(void)
 	sensor_sub = orb_subscribe(ORB_ID(sensor_combined));
 }
 
-void build_eam_response(struct eam_module_msg *msg)
+void build_eam_response(char **buffer, int *size)
 {
 	/* get a local copy of the current sensor values */
 	struct sensor_combined_s raw;
 	memset(&raw, 0, sizeof(raw));
 	orb_copy(ORB_ID(sensor_combined), sensor_sub, &raw);
 	
-	memset(msg, 0, sizeof(*msg));	
+	struct eam_module_msg msg;
+	*size = sizeof(msg);
+	memset(&msg, 0, *size);	
 
-	msg->start = START_BYTE;
-	msg->eam_sensor_id = ELECTRIC_AIR_MODULE;
-	msg->sensor_id = EAM_SENSOR_ID;
-	msg->temperature1 = (uint8_t)(raw.baro_temp_celcius + 20);
-	msg->temperature2 = TEMP_ZERO_CELSIUS;
-	msg->main_voltage_L = (uint8_t)(raw.battery_voltage_v * 10);
+	msg.start = START_BYTE;
+	msg.eam_sensor_id = ELECTRIC_AIR_MODULE;
+	msg.sensor_id = EAM_SENSOR_ID;
+	msg.temperature1 = (uint8_t)(raw.baro_temp_celcius + 20);
+	msg.temperature2 = TEMP_ZERO_CELSIUS;
+	msg.main_voltage_L = (uint8_t)(raw.battery_voltage_v * 10);
 
 	uint16_t alt = (uint16_t)(raw.baro_alt_meter + 500);
-	msg->altitude_L = (uint8_t)alt & 0xff;
-	msg->altitude_H = (uint8_t)(alt >> 8) & 0xff;
+	msg.altitude_L = (uint8_t)alt & 0xff;
+	msg.altitude_H = (uint8_t)(alt >> 8) & 0xff;
 	
-	msg->stop = STOP_BYTE;
+	msg.stop = STOP_BYTE;
+
+	//*chunk = malloc( sizeof(char) * length);
+	//char tmp_buffer[*size];
+	*buffer = malloc(sizeof(char) * *size);
+	memcpy(*buffer, &msg, *size);
 }
\ No newline at end of file
diff --git a/apps/hott_telemetry/messages.h b/apps/hott_telemetry/messages.h
index fb305cd8d2..51217a23b9 100644
--- a/apps/hott_telemetry/messages.h
+++ b/apps/hott_telemetry/messages.h
@@ -35,7 +35,7 @@
 /**
  * @file messages.h
  *
- * Graupner HoTT Telemetry message generator.
+ * Graupner HoTT Telemetry message generation.
  *
  */
 #ifndef MESSAGES_H_
@@ -109,6 +109,6 @@ struct eam_module_msg {
 };
 
 void messages_init(void);
-void build_eam_response(struct eam_module_msg *msg);
+void build_eam_response(char **buffer, int *size);
 
 #endif /* MESSAGES_H_ */