diff --git a/nuttx/Documentation/NuttxPortingGuide.html b/nuttx/Documentation/NuttxPortingGuide.html index f24517503b..b0a7a243c8 100644 --- a/nuttx/Documentation/NuttxPortingGuide.html +++ b/nuttx/Documentation/NuttxPortingGuide.html @@ -775,11 +775,6 @@ is code complete but has not yet been verified. -
  • configs/detron: - This is a NuttX port to the Detron LPC1768 board from Decio Renno - (Detron Electronica) -
    • -
  • configs/ea3131: Embedded Artists EA3131 Development bard. This board is based on the an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain. diff --git a/nuttx/Documentation/README.html b/nuttx/Documentation/README.html index 38ebe0f65e..5cb9e0d3e9 100644 --- a/nuttx/Documentation/README.html +++ b/nuttx/Documentation/README.html @@ -60,8 +60,6 @@ | | | `- README.txt | | |- demo9s12ne64/ | | | `- README.txt - | | |- detron/ - | | | `- README.txt | | |- ea3131/ | | | `- README.txt | | |- ea3152/ diff --git a/nuttx/README.txt b/nuttx/README.txt index 87f870d963..5e8b42787e 100755 --- a/nuttx/README.txt +++ b/nuttx/README.txt @@ -519,8 +519,6 @@ nuttx | | `- README.txt | |- demo0s12ne64/ | | `- README.txt - | |- detron/ - | | `- README.txt | |- ea3131/ | | `- README.txt | |- ea3152/ diff --git a/nuttx/configs/README.txt b/nuttx/configs/README.txt index 6bec1ca1c3..ecbaaf51be 100644 --- a/nuttx/configs/README.txt +++ b/nuttx/configs/README.txt @@ -1224,10 +1224,6 @@ configs/demo9s12ne64 port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it is code complete but has not yet been verified. -configs/detron - This is a port of NuttX port to the Detron LPC1768 board from Decio Renno - (http://www.detroneletronica.com.br/) - configs/ea3131 Embedded Artists EA3131 Development bard. This board is based on the an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain*. diff --git a/nuttx/configs/detron/README.txt b/nuttx/configs/detron/README.txt deleted file mode 100755 index 7a45a2ac1f..0000000000 --- a/nuttx/configs/detron/README.txt +++ /dev/null @@ -1,404 +0,0 @@ -README -^^^^^^ - -README for NuttX port to the Detron LPC1768 board from Decio Renno -(http://www.detroneletronica.com.br/) - -Contents -^^^^^^^^ - - Internet Radio Detron Board - Development Environment - GNU Toolchain Options - IDEs - NuttX buildroot Toolchain - Detron Configuration Options - USB Host Configuration - Configurations - -Internet Radio Detron Board -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - Graphic display - - Pin Port Function - 58 P0(20) DI - 59 P0(19) RW - 49 P0(11) ENABLE - 78 P0(7) D0 - 79 P0(6) D1 - 78 P0(5) D2 - 81 P0(4) D3 - 94 P1(1) D4 - 95 P1(0) D5 - 47 P0(1) D6 - 46 P0(0) D7 - - VS1003 - - Pin Port Function - 65 P2(8) xreset - 85 P4(29) dreq - 82 P4(28) xdcs - 63 P0(16) xcs - 62 P0(15) sclk - 60 P0(18) si - 61 P0(17) so - - USB - - Pin Port Function - 29 D+ - 30 D- - -Development Environment -^^^^^^^^^^^^^^^^^^^^^^^ - - Either Linux or Cygwin on Windows can be used for the development environment. - The source has been built only using the GNU toolchain (see below). Other - toolchains will likely cause problems. Testing was performed using the Cygwin - environment. - -GNU Toolchain Options -^^^^^^^^^^^^^^^^^^^^^ - - The NuttX make system has been modified to support the following different - toolchain options. - - 1. The CodeSourcery GNU toolchain, - 2. The devkitARM GNU toolchain, - 3. The NuttX buildroot Toolchain (see below). - - All testing has been conducted using the NuttX buildroot toolchain. However, - the make system is setup to default to use the devkitARM toolchain. To use - the CodeSourcery or devkitARM toolchain, you simply need add one of the - following configuration options to your .config (or defconfig) file: - - CONFIG_LPC17_CODESOURCERYW=y : CodeSourcery under Windows - CONFIG_LPC17_CODESOURCERYL=y : CodeSourcery under Linux - CONFIG_LPC17_DEVKITARM=y : devkitARM under Windows - CONFIG_LPC17_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default) - - If you are not using CONFIG_LPC17_BUILDROOT, then you may also have to modify - the PATH in the setenv.h file if your make cannot find the tools. - - NOTE: the CodeSourcery (for Windows)and devkitARM are Windows native toolchains. - The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or - Linux native toolchains. There are several limitations to using a Windows based - toolchain in a Cygwin environment. The three biggest are: - - 1. The Windows toolchain cannot follow Cygwin paths. Path conversions are - performed automatically in the Cygwin makefiles using the 'cygpath' utility - but you might easily find some new path problems. If so, check out 'cygpath -w' - - 2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links - are used in Nuttx (e.g., include/arch). The make system works around these - problems for the Windows tools by copying directories instead of linking them. - But this can also cause some confusion for you: For example, you may edit - a file in a "linked" directory and find that your changes had no effect. - That is because you are building the copy of the file in the "fake" symbolic - directory. If you use a Windows toolchain, you should get in the habit of - making like this: - - make clean_context all - - An alias in your .bashrc file might make that less painful. - - 3. Dependencies are not made when using Windows versions of the GCC. This is - because the dependencies are generated using Windows pathes which do not - work with the Cygwin make. - - Support has been added for making dependencies with the windows-native toolchains. - That support can be enabled by modifying your Make.defs file as follows: - - - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - + MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)" - - If you have problems with the dependency build (for example, if you are not - building on C:), then you may need to modify tools/mkdeps.sh - - NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization - level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with - -Os. - - NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that - the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM - path or will get the wrong version of make. - -IDEs -^^^^ - - NuttX is built using command-line make. It can be used with an IDE, but some - effort will be required to create the project (There is a simple RIDE project - in the RIDE subdirectory). - - Makefile Build - -------------- - Under Eclipse, it is pretty easy to set up an "empty makefile project" and - simply use the NuttX makefile to build the system. That is almost for free - under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty - makefile project in order to work with Windows (Google for "Eclipse Cygwin" - - there is a lot of help on the internet). - - Native Build - ------------ - Here are a few tips before you start that effort: - - 1) Select the toolchain that you will be using in your .config file - 2) Start the NuttX build at least one time from the Cygwin command line - before trying to create your project. This is necessary to create - certain auto-generated files and directories that will be needed. - 3) Set up include pathes: You will need include/, arch/arm/src/lpc17xx, - arch/arm/src/common, arch/arm/src/armv7-m, and sched/. - 4) All assembly files need to have the definition option -D __ASSEMBLY__ - on the command line. - - Startup files will probably cause you some headaches. The NuttX startup file - is arch/arm/src/lpc17x/lpc17_vectors.S. - -NuttX buildroot Toolchain -^^^^^^^^^^^^^^^^^^^^^^^^^ - - A GNU GCC-based toolchain is assumed. The files */setenv.sh should - be modified to point to the correct path to the Cortex-M3 GCC toolchain (if - different from the default in your PATH variable). - - If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX - SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573). - This GNU toolchain builds and executes in the Linux or Cygwin environment. - - 1. You must have already configured Nuttx in /nuttx. - - cd tools - ./configure.sh detron/ - - 2. Download the latest buildroot package into - - 3. unpack the buildroot tarball. The resulting directory may - have versioning information on it like buildroot-x.y.z. If so, - rename /buildroot-x.y.z to /buildroot. - - 4. cd /buildroot - - 5. cp configs/cortexm3-defconfig-4.3.3 .config - - 6. make oldconfig - - 7. make - - 8. Edit setenv.h, if necessary, so that the PATH variable includes - the path to the newly built binaries. - - See the file configs/README.txt in the buildroot source tree. That has more - detailed PLUS some special instructions that you will need to follow if you - are building a Cortex-M3 toolchain for Cygwin under Windows. - - NOTE: This is an OABI toolchain. - -Detron Configuration Options -^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - CONFIG_ARCH - Identifies the arch/ subdirectory. This should - be set to: - - CONFIG_ARCH=arm - - CONFIG_ARCH_family - For use in C code: - - CONFIG_ARCH_ARM=y - - CONFIG_ARCH_architecture - For use in C code: - - CONFIG_ARCH_CORTEXM3=y - - CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory - - CONFIG_ARCH_CHIP=lpc17xx - - CONFIG_ARCH_CHIP_name - For use in C code to identify the exact - chip: - - CONFIG_ARCH_CHIP_LPC1768=y - - CONFIG_ARCH_BOARD - Identifies the configs subdirectory and - hence, the board that supports the particular chip or SoC. - - CONFIG_ARCH_BOARD=detron (for the Detron board) - - CONFIG_ARCH_BOARD_name - For use in C code - - CONFIG_ARCH_BOARD_DETRON=y - - CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation - of delay loops - - CONFIG_ENDIAN_BIG - define if big endian (default is little - endian) - - CONFIG_DRAM_SIZE - Describes the installed DRAM (CPU SRAM in this case): - - CONFIG_DRAM_SIZE=(32*1024) (32Kb) - - There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1. - - CONFIG_DRAM_START - The start address of installed DRAM - - CONFIG_DRAM_START=0x10000000 - - CONFIG_DRAM_END - Last address+1 of installed RAM - - CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) - - CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization - - CONFIG_ARCH_IRQPRIO=y - - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that - have LEDs - - CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt - stack. If defined, this symbol is the size of the interrupt - stack in bytes. If not defined, the user task stacks will be - used during interrupt handling. - - CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions - - CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. - - CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that - cause a 100 second delay during boot-up. This 100 second delay - serves no purpose other than it allows you to calibratre - CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure - the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until - the delay actually is 100 seconds. - - Individual subsystems can be enabled: - CONFIG_LPC17_MAINOSC=y - CONFIG_LPC17_PLL0=y - CONFIG_LPC17_PLL1=n - CONFIG_LPC17_ETHERNET=n - CONFIG_LPC17_USBHOST=n - CONFIG_LPC17_USBOTG=n - CONFIG_LPC17_USBDEV=n - CONFIG_LPC17_UART0=y - CONFIG_LPC17_UART1=n - CONFIG_LPC17_UART2=n - CONFIG_LPC17_UART3=n - CONFIG_LPC17_CAN1=n - CONFIG_LPC17_CAN2=n - CONFIG_LPC17_SPI=n - CONFIG_LPC17_SSP0=n - CONFIG_LPC17_SSP1=n - CONFIG_LPC17_I2C0=n - CONFIG_LPC17_I2C1=n - CONFIG_LPC17_I2S=n - CONFIG_LPC17_TMR0=n - CONFIG_LPC17_TMR1=n - CONFIG_LPC17_TMR2=n - CONFIG_LPC17_TMR3=n - CONFIG_LPC17_RIT=n - CONFIG_LPC17_PWM=n - CONFIG_LPC17_MCPWM=n - CONFIG_LPC17_QEI=n - CONFIG_LPC17_RTC=n - CONFIG_LPC17_WDT=n - CONFIG_LPC17_ADC=n - CONFIG_LPC17_DAC=n - CONFIG_LPC17_GPDMA=n - CONFIG_LPC17_FLASH=n - - LPC17xx specific device driver settings - - CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the - console and ttys0 (default is the UART0). - CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. - This specific the size of the receive buffer - CONFIG_UARTn_TXBUFSIZE - Characters are buffered before - being sent. This specific the size of the transmit buffer - CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be - CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. - CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity - CONFIG_UARTn_2STOP - Two stop bits - - LPC17xx specific PHY/Ethernet device driver settings. These setting - also require CONFIG_NET and CONFIG_LPC17_ETHERNET. - - CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY - CONFIG_PHY_AUTONEG - Enable auto-negotion - CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. - CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex - - CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb - CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 - CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 - CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is - the higest priority. - CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). - CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs - CONFIG_DEBUG. - CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets. - Also needs CONFIG_DEBUG. - CONFIG_NET_HASH - Enable receipt of near-perfect match frames. - CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. - Automatically set if CONFIG_NET_IGMP is selected. - - LPC17xx USB Device Configuration - - CONFIG_LPC17_USBDEV_FRAME_INTERRUPT - Handle USB Start-Of-Frame events. - Enable reading SOF from interrupt handler vs. simply reading on demand. - Probably a bad idea... Unless there is some issue with sampling the SOF - from hardware asynchronously. - CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT - Enable high priority interrupts. I have no idea why you might want to - do that - CONFIG_LPC17_USBDEV_NDMADESCRIPTORS - Number of DMA descriptors to allocate in SRAM. - CONFIG_LPC17_USBDEV_DMA - Enable lpc17xx-specific DMA support - CONFIG_LPC17_USBDEV_NOVBUS - Define if the hardware implementation does not support the VBUS signal - CONFIG_LPC17_USBDEV_NOLED - Define if the hardware implementation does not support the LED output - - LPC17xx USB Host Configuration - - CONFIG_USBHOST_OHCIRAM_SIZE - Total size of OHCI RAM (in AHB SRAM Bank 1) - CONFIG_USBHOST_NEDS - Number of endpoint descriptors - CONFIG_USBHOST_NTDS - Number of transfer descriptors - CONFIG_USBHOST_TDBUFFERS - Number of transfer descriptor buffers - CONFIG_USBHOST_TDBUFSIZE - Size of one transfer descriptor buffer - CONFIG_USBHOST_IOBUFSIZE - Size of one end-user I/O buffer. This can be zero if the - application can guarantee that all end-user I/O buffers - reside in AHB SRAM. - -Configurations -^^^^^^^^^^^^^^ - -Each Detron configuration is maintained in a sudirectory and can be -selected as follow: - - cd tools - ./configure.sh detron/ - cd - - . ./setenv.sh - -Where is one of the following: - - hidkbd: - This configuration directory, performs a simple test of the USB host - HID keyboard class driver using the test logic in examples/hidkbd. - - nsh: - Configures the NuttShell (nsh) located at examples/nsh. The - Configuration enables only the serial NSH interfaces. - - ostest: - This configuration directory, performs a simple OS test using - examples/ostest. diff --git a/nuttx/configs/detron/hidkbd/Make.defs b/nuttx/configs/detron/hidkbd/Make.defs deleted file mode 100755 index d5470a6857..0000000000 --- a/nuttx/configs/detron/hidkbd/Make.defs +++ /dev/null @@ -1,163 +0,0 @@ -############################################################################ -# configs/detron/hidkbd/Make.defs -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Authors: Gregory Nutt -# Rafael Noronha -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config - -# Setup for the selected toolchain - -ifeq ($(CONFIG_LPC17_CODESOURCERYW),y) - # CodeSourcery under Windows - CROSSDEV = arm-none-eabi- - WINTOOL = y - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -endif -ifeq ($(CONFIG_LPC17_CODESOURCERYL),y) - # CodeSourcery under Linux - CROSSDEV = arm-none-eabi- - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft - MAXOPTIMIZATION = -O2 -endif -ifeq ($(CONFIG_LPC17_DEVKITARM),y) - # devkitARM under Windows - CROSSDEV = arm-eabi- - WINTOOL = y - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -endif -ifeq ($(CONFIG_LPC17_BUILDROOT),y) - # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft - MAXOPTIMIZATION = -Os -endif - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/winlink.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/hidkbd/ld.script}" - MAXOPTIMIZATION = -O2 -else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/hidkbd/ld.script -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") - ARCHOPTIMIZATION = -g -else - ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - -define PREPROCESS - @echo "CPP: $1->$2" - @$(CPP) $(CPPFLAGS) $1 -o $2 -endef - -define COMPILE - @echo "CC: $1" - @$(CC) -c $(CFLAGS) $1 -o $2 -endef - -define COMPILEXX - @echo "CXX: $1" - @$(CXX) -c $(CXXFLAGS) $1 -o $2 -endef - -define ASSEMBLE - @echo "AS: $1" - @$(CC) -c $(AFLAGS) $1 -o $2 -endef - -define ARCHIVE - echo "AR: $2"; \ - $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; } -endef - -define CLEAN - @rm -f *.o *.a -endef - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/nuttx/configs/detron/hidkbd/appconfig b/nuttx/configs/detron/hidkbd/appconfig deleted file mode 100644 index ee9ea1277e..0000000000 --- a/nuttx/configs/detron/hidkbd/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/detron/hidkbd/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/hidkbd - diff --git a/nuttx/configs/detron/hidkbd/defconfig b/nuttx/configs/detron/hidkbd/defconfig deleted file mode 100755 index 00b6503f95..0000000000 --- a/nuttx/configs/detron/hidkbd/defconfig +++ /dev/null @@ -1,894 +0,0 @@ -############################################################################ -# configs/detron/hidkbd/defconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Authors: Gregory Nutt -# Rafael Noronha -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip familyl. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_DRAM_SIZE - Describes the installed DRAM. -# CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM -# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. -# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. -# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that -# cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until -# the delay actually is 100 seconds. -# CONFIG_ARCH_DMA - Support DMA initialization -# -CONFIG_ARCH=arm -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP=lpc17xx -CONFIG_ARCH_CHIP_LPC1768=y -CONFIG_ARCH_BOARD=detron -CONFIG_ARCH_BOARD_DETRON=y -CONFIG_BOARD_LOOPSPERMSEC=7982 -CONFIG_DRAM_SIZE=(32*1024) -CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=n -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=n -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n - -# -# Identify toolchain and linker options -# -CONFIG_LPC17_CODESOURCERYW=n -CONFIG_LPC17_CODESOURCERYL=n -CONFIG_LPC17_DEVKITARM=n -CONFIG_LPC17_BUILDROOT=y - -# -# Individual subsystems can be enabled: -# -# Individual subsystems can be enabled: -# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h) -# -CONFIG_LPC17_ETHERNET=n -CONFIG_LPC17_USBHOST=y -CONFIG_LPC17_USBOTG=n -CONFIG_LPC17_USBDEV=n -CONFIG_LPC17_UART0=y -CONFIG_LPC17_UART1=n -CONFIG_LPC17_UART2=n -CONFIG_LPC17_UART3=n -CONFIG_LPC17_CAN1=n -CONFIG_LPC17_CAN2=n -CONFIG_LPC17_SPI=n -CONFIG_LPC17_SSP0=n -CONFIG_LPC17_SSP1=n -CONFIG_LPC17_I2C0=n -CONFIG_LPC17_I2C1=n -CONFIG_LPC17_I2S=n -CONFIG_LPC17_TMR0=n -CONFIG_LPC17_TMR1=n -CONFIG_LPC17_TMR2=n -CONFIG_LPC17_TMR3=n -CONFIG_LPC17_RIT=n -CONFIG_LPC17_PWM=n -CONFIG_LPC17_MCPWM=n -CONFIG_LPC17_QEI=n -CONFIG_LPC17_RTC=n -CONFIG_LPC17_WDT=n -CONFIG_LPC17_ADC=n -CONFIG_LPC17_DAC=n -CONFIG_LPC17_GPDMA=n - -# -# LPC17xx specific serial device driver settings -# -# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the -# console and ttys0 (default is the UART1). -# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_UARTn_2STOP - Two stop bits -# -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART3_SERIAL_CONSOLE=n - -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART3_TXBUFSIZE=256 - -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART3_RXBUFSIZE=256 - -CONFIG_UART0_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART3_BAUD=115200 -CONFIG_UART1_BAUD=115200 - -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART3_BITS=8 - -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART3_PARITY=0 - -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 -CONFIG_UART3_2STOP=0 - -# -# LPC17xx specific PHY/Ethernet device driver settings -# -# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY -# CONFIG_PHY_AUTONEG - Enable auto-negotion -# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. -# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex -# CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb -# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 -# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 -# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is -# the higest priority. -# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). -# CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets. -# Also needs CONFIG_DEBUG. -# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs -# CONFIG_DEBUG. -# CONFIG_NET_HASH - Enable receipt of near-perfect match frames. -# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. -# Automatically set if CONFIG_NET_IGMP is selected. -# -CONFIG_PHY_KS8721=y -CONFIG_PHY_AUTONEG=y -CONFIG_PHY_SPEED100=n -CONFIG_PHY_FDUPLEX=y - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. -# You would only need this if you are concerned about accurate -# time conversions in the past or in the distant future. -# CONFIG_JULIAN_TIME - Enables Julian time conversions. You -# would only need this if you are concerned about accurate -# time conversion in the distand past. You must also define -# CONFIG_GREGORIAN_TIME in order to use Julian time. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. -# This format will support execution of NuttX binaries located -# in a ROMFS filesystem (see examples/nxflat). -# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to -# handle delayed processing from interrupt handlers. This feature -# is required for some drivers but, if there are not complaints, -# can be safely disabled. The worker thread also performs -# garbage collection -- completing any delayed memory deallocations -# from interrupt handlers. If the worker thread is disabled, -# then that clean will be performed by the IDLE thread instead -# (which runs at the lowest of priority and may not be appropriate -# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE -# is enabled, then the following options can also be used: -# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker -# thread. Default: 50 -# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for -# work in units of microseconds. Default: 50*1000 (50 MS). -# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker -# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. -# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up -# the worker thread. Default: 4 -# -#CONFIG_APPS_DIR= -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_USB=n -CONFIG_MM_REGIONS=2 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2010 -CONFIG_START_MONTH=12 -CONFIG_START_DAY=22 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=y -CONFIG_SCHED_WORKPRIORITY=50 -CONFIG_SCHED_WORKPERIOD=(50*1000) -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=4 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=n - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 - -# -# Filesystem configuration -# -# CONFIG_FS_FAT - Enable FAT filesystem support -# CONFIG_FAT_SECTORSIZE - Max supported sector size -# CONFIG_FS_ROMFS - Enable ROMFS filesystem support -# -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n - -# -# SPI-based MMC/SD driver -# -# CONFIG_MMCSD_NSLOTS -# Number of MMC/SD slots supported by the driver -# CONFIG_MMCSD_READONLY -# Provide read-only access (default is read/write) -# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. -# Default is 20MHz. -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# Block driver buffering -# -# CONFIG_FS_READAHEAD -# Enable read-ahead buffering -# CONFIG_FS_WRITEBUFFER -# Enable write buffering -# -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n - -# -# SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until -# accept() is called. The size of the backlog is selected when listen() is called. -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates -# -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n -#CONFIG_NET_FWCACHE_SIZE=2 - -# -# UIP Network Utilities -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# USB Device Configuration -# -# CONFIG_USBDEV -# Enables USB device support -# CONFIG_USBDEV_ISOCHRONOUS -# Build in extra support for isochronous endpoints -# CONFIG_USBDEV_DUALSPEED -# Hardware handles high and full speed operation (USB 2.0) -# CONFIG_USBDEV_SELFPOWERED -# Will cause USB features to indicate that the device is -# self-powered -# CONFIG_USBDEV_MAXPOWER -# Maximum power consumption in mA -# CONFIG_USBDEV_TRACE -# Enables USB tracing for debug -# CONFIG_USBDEV_TRACE_NRECORDS -# Number of trace entries to remember -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# USB Host Configuration -# -# CONFIG_USBHOST -# Enables USB host support -# CONFIG_USBHOST_NPREALLOC -# Number of pre-allocated class instances -# CONFIG_USBHOST_BULK_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling bulk endpoint support -# CONFIG_USBHOST_INT_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling interrupt endpoint support -# CONFIG_USBHOST_ISOC_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling isochronous endpoint support -# -CONFIG_USBHOST=y -CONFIG_USBHOST_NPREALLOC=0 -CONFIG_USBHOST_BULK_DISABLE=y -CONFIG_USBHOST_INT_DISABLE=n -CONFIG_USBHOST_ISOC_DISABLE=y - -# -# LPC17xx USB Device Configuration -# -# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT -# Handle USB Start-Of-Frame events. -# Enable reading SOF from interrupt handler vs. simply reading on demand. -# Probably a bad idea... Unless there is some issue with sampling the SOF -# from hardware asynchronously. -# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT -# Enable high priority interrupts. I have no idea why you might want to -# do that -# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS -# Number of DMA descriptors to allocate in SRAM. -# CONFIG_LPC17_USBDEV_DMA -# Enable lpc17xx-specific DMA support -# -CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n -CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n -CONFIG_LPC17_USBDEV_DMA=n -CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0 -CONFIG_LPC17_USBDEV_DMAINTMASK=0 - -# -# LPC17xx USB Host Configuration -# -# OHCI RAM layout: -# CONFIG_USBHOST_OHCIRAM_SIZE -# Total size of OHCI RAM (in AHB SRAM Bank 1) -# CONFIG_USBHOST_NEDS -# Number of endpoint descriptors -# CONFIG_USBHOST_NTDS -# Number of transfer descriptors -# CONFIG_USBHOST_TDBUFFERS -# Number of transfer descriptor buffers -# CONFIG_USBHOST_TDBUFSIZE -# Size of one transfer descriptor buffer -# CONFIG_USBHOST_IOBUFSIZE -# Size of one end-user I/O buffer -# -CONFIG_USBHOST_OHCIRAM_SIZE=1536 -CONFIG_USBHOST_NEDS=2 -CONFIG_USBHOST_NTDS=2 -CONFIG_USBHOST_TDBUFFERS=3 -CONFIG_USBHOST_TDBUFSIZE=128 -CONFIG_USBHOST_IOBUFSIZE=512 - -# -# USB Serial Device Configuration -# -# CONFIG_USBSER -# Enable compilation of the USB serial driver -# CONFIG_USBSER_EPINTIN -# The logical 7-bit address of a hardware endpoint that supports -# interrupt IN operation -# CONFIG_USBSER_EPBULKOUT -# The logical 7-bit address of a hardware endpoint that supports -# bulk OUT operation -# CONFIG_USBSER_EPBULKIN -# The logical 7-bit address of a hardware endpoint that supports -# bulk IN operation -# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE -# Size of the serial receive/transmit buffers -# -CONFIG_USBSER=n -CONFIG_USBSER_EPINTIN=1 -CONFIG_USBSER_EPBULKOUT=2 -CONFIG_USBSER_EPBULKIN=5 -CONFIG_USBSER_NWRREQS=4 -CONFIG_USBSER_NRDREQS=4 -CONFIG_USBSER_VENDORID=0x067b -CONFIG_USBSER_PRODUCTID=0x2303 -CONFIG_USBSER_VENDORSTR="Nuttx" -CONFIG_USBSER_PRODUCTSTR="USBdev Serial" -CONFIG_USBSER_RXBUFSIZE=512 -CONFIG_USBSER_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -# CONFIG_USBSTRG -# Enable compilation of the USB storage driver -# CONFIG_USBSTRG_EP0MAXPACKET -# Max packet size for endpoint 0 -# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN -# The logical 7-bit address of a hardware endpoints that support -# bulk OUT and IN operations -# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN -# The size of the buffer in each write/read request. This -# value needs to be at least as large as the endpoint -# maxpacket and ideally as large as a block device sector. -# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSTRG_REMOVABLE -# Select if the media is removable -# -CONFIG_USBSTRG=n -CONFIG_USBSTRG_EP0MAXPACKET=64 -CONFIG_USBSTRG_EPBULKOUT=2 -CONFIG_USBSTRG_EPBULKIN=5 -CONFIG_USBSTRG_NRDREQS=2 -CONFIG_USBSTRG_NWRREQS=2 -CONFIG_USBSTRG_BULKINREQLEN=256 -CONFIG_USBSTRG_BULKOUTREQLEN=256 -CONFIG_USBSTRG_VENDORID=0x584e -CONFIG_USBSTRG_VENDORSTR="NuttX" -CONFIG_USBSTRG_PRODUCTID=0x5342 -CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage" -CONFIG_USBSTRG_VERSIONNO=0x0399 -CONFIG_USBSTRG_REMOVABLE=y - -# -# Settings for examples/uip -# -CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_UIP_DHCPC=n - -# -# Settings for examples/nettest -# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act -# as either the client side or server side of the test -# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the -# client side simply receives messages forever, allowing -# measurement of throughput -# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has -# no MAC address; one will be assigned -# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address -# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address -# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask -# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the -# client side of the test (may be target or host) -# -CONFIG_EXAMPLE_NETTEST_SERVER=n -CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLE_NETTEST_NOMAC=n -CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_STACKSIZE - Stack size to use for new threads. -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# CONFIG_NSH_ARCHINIT - Platform provides architecture -# specific initialization (nsh_archinitialize()). -# -# If CONFIG_NSH_TELNET is selected: -# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_NSH_DHCPC - Obtain address using DHCP -# CONFIG_NSH_IPADDR - Provides static IP address -# CONFIG_NSH_DRIPADDR - Provides static router IP address -# CONFIG_NSH_NETMASK - Provides static network mask -# CONFIG_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_NSH_ROMFSETC is selected: -# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_NSH_INITSCRIPT - Relative path to init script -# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_STACKSIZE=2048 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=y -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT=/tmp - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# Settings for examples/usbserial -# -# CONFIG_EXAMPLES_USBSERIAL_INONLY -# Only verify IN (device-to-host) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_OUTONLY -# Only verify OUT (host-to-device) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL -# Send only small, single packet messages. Default: Send large and small. -# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG -# Send only large, multi-packet messages. Default: Send large and small. -# -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - -# -# Settings for internet_radio by Decio -# -CONFIG_INTERNETRADIO_ARCHINIT=n - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# (should also be =n for the LPC17xx which always runs from flash) -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/detron/hidkbd/ld.script b/nuttx/configs/detron/hidkbd/ld.script deleted file mode 100755 index 92963f09bd..0000000000 --- a/nuttx/configs/detron/hidkbd/ld.script +++ /dev/null @@ -1,110 +0,0 @@ -/**************************************************************************** - * configs/detron/hidkbd/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Authors: Gregory Nutt - * Rafael Noronha - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .ARM.exidx : { - __exidx_start = ABSOLUTE(.); - *(.ARM.exidx*) - __exidx_end = ABSOLUTE(.); - } >sram - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/detron/hidkbd/setenv.sh b/nuttx/configs/detron/hidkbd/setenv.sh deleted file mode 100755 index 1464c414dc..0000000000 --- a/nuttx/configs/detron/hidkbd/setenv.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -# configs/detron/hidkbd/setenv.sh -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Authors: Gregory Nutt -# Rafael Noronha -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" -export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/nuttx/configs/detron/include/board.h b/nuttx/configs/detron/include/board.h deleted file mode 100755 index 0b8df9e5d3..0000000000 --- a/nuttx/configs/detron/include/board.h +++ /dev/null @@ -1,207 +0,0 @@ -/************************************************************************************ - * configs/detron/include/board.h - * include/arch/board/board.h - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Authors: - * Decio Renno - * Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -#ifndef __ARCH_BOARD_BOARD_H -#define __ARCH_BOARD_BOARD_H - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include -#include //GPIO IRQ -#include - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/* Clocking *************************************************************************/ -/* NOTE: The following definitions require lpc17_syscon.h. It is not included here - * because the including C file may not have that file in its include path. - */ - -#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */ -#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */ -#define BOARD_RTCCLK_FREQUENCY (32000) /* RTC oscillator frequency */ -#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */ - -/* This is the clock setup we configure for: - * - * SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for source - * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1 - * CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6 - */ - -#define LPC17_CCLK 80000000 /* 80Mhz */ - -/* Select the main oscillator as the frequency source. SYSCLK is then the frequency - * of the main oscillator. - */ - -#undef CONFIG_LPC17_MAINOSC -#define CONFIG_LPC17_MAINOSC 1 -#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN - -/* Select the main oscillator and CCLK divider. The output of the divider is CCLK. - * The input to the divider (PLLCLK) will be determined by the PLL output. - */ - -#define BOARD_CCLKCFG_DIVIDER 6 -#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT) - -/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK). - * - * Source clock: Main oscillator - * PLL0 Multiplier value (M): 20 - * PLL0 Pre-divider value (N): 1 - * - * PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz - */ - -#undef CONFIG_LPC17_PLL0 -#define CONFIG_LPC17_PLL0 1 -#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN - -#define BOARD_PLL0CFG_MSEL 20 -#define BOARD_PLL0CFG_NSEL 1 -#define BOARD_PLL0CFG_VALUE \ - (((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \ - ((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT)) - -/* PLL1 -- Not used. */ - -#undef CONFIG_LPC17_PLL1 -#define BOARD_PLL1CFG_MSEL 36 -#define BOARD_PLL1CFG_NSEL 1 -#define BOARD_PLL1CFG_VALUE \ - (((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \ - ((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT)) - -/* USB divider. This divider is used when PLL1 is not enabled to get the - * USB clock from PLL0: - * - * USBCLK = PLL0CLK / 10 = 48MHz - */ - -#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10 - -/* FLASH Configuration */ - -#undef CONFIG_LP17_FLASH -#define CONFIG_LP17_FLASH 1 -#define BOARD_FLASHCFG_VALUE 0x0000303a - - -/* Button definitions ***************************************************************/ - -#define panel_pulse_up 1 /* Bit 0: painel_pulsada_up */ -#define panel_pulse_down 2 /* Bit 1: painel_pulsada_down */ -#define panel_center 4 /* Bit 2: painel_pulsada_centro */ - -/************************************************************************************ - * Public Types - ************************************************************************************/ - -#ifndef __ASSEMBLY__ - -/************************************************************************************ - * Public Data - ************************************************************************************/ - -#undef EXTERN -#if defined(__cplusplus) -#define EXTERN extern "C" -extern "C" { -#else -#define EXTERN extern -#endif - -/************************************************************************************ - * Public Function Prototypes - ************************************************************************************/ -/************************************************************************************ - * Name: lpc17_boardinitialize - * - * Description: - * All LPC17xx architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured - * and mapped but before any devices have been initialized. - * - ************************************************************************************/ - -EXTERN void lpc17_boardinitialize(void); - - -EXTERN void up_buttoninit(void); - -/************************************************************************************ - * Name: up_buttons - * - * Description: - * After up_buttoninit() has been called, up_buttons() may be called to collect - * the state of all buttons. up_buttons() returns an 8-bit bit set with each bit - * associated with a button. See the BUTTON* definitions above for the meaning of - * each bit in the returned value. - * - ************************************************************************************/ - -EXTERN uint8_t up_buttons(void); - -/************************************************************************************ - * Name: up_up_irq_pin_panel_pulse_up/down/center - * - * Description: - * These functions may be called to register an interrupt handler that will be - * called when BUTTON UP/DOWN/CENTER is depressed. The previous interrupt handler value is - * returned (so that it may restored, if so desired). - * - ************************************************************************************/ - - -EXTERN xcpt_t up_irq_pin_panel_pulse_up(xcpt_t irqhandler); -EXTERN xcpt_t up_irq_pin_panel_pulse_down(xcpt_t irqhandler); -EXTERN xcpt_t up_irq_pin_panel_center(xcpt_t irqhandler); - -#undef EXTERN -#if defined(__cplusplus) -} -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* __ARCH_BOARD_BOARD_H */ diff --git a/nuttx/configs/detron/nsh/Make.defs b/nuttx/configs/detron/nsh/Make.defs deleted file mode 100755 index 9e25b4dc44..0000000000 --- a/nuttx/configs/detron/nsh/Make.defs +++ /dev/null @@ -1,162 +0,0 @@ -############################################################################ -# configs/detron/nsh/Make.defs -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config - -# Setup for the selected toolchain - -ifeq ($(CONFIG_LPC17_CODESOURCERYW),y) - # CodeSourcery under Windows - CROSSDEV = arm-none-eabi- - WINTOOL = y - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -endif -ifeq ($(CONFIG_LPC17_CODESOURCERYL),y) - # CodeSourcery under Linux - CROSSDEV = arm-none-eabi- - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft - MAXOPTIMIZATION = -O2 -endif -ifeq ($(CONFIG_LPC17_DEVKITARM),y) - # devkitARM under Windows - CROSSDEV = arm-eabi- - WINTOOL = y - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -endif -ifeq ($(CONFIG_LPC17_BUILDROOT),y) - # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft - MAXOPTIMIZATION = -Os -endif - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/winlink.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}" - MAXOPTIMIZATION = -O2 -else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") - ARCHOPTIMIZATION = -g -else - ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - -define PREPROCESS - @echo "CPP: $1->$2" - @$(CPP) $(CPPFLAGS) $1 -o $2 -endef - -define COMPILE - @echo "CC: $1" - @$(CC) -c $(CFLAGS) $1 -o $2 -endef - -define COMPILEXX - @echo "CXX: $1" - @$(CXX) -c $(CXXFLAGS) $1 -o $2 -endef - -define ASSEMBLE - @echo "AS: $1" - @$(CC) -c $(AFLAGS) $1 -o $2 -endef - -define ARCHIVE - echo "AR: $2"; \ - $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; } -endef - -define CLEAN - @rm -f *.o *.a -endef - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/nuttx/configs/detron/nsh/appconfig b/nuttx/configs/detron/nsh/appconfig deleted file mode 100644 index 37b8a87fae..0000000000 --- a/nuttx/configs/detron/nsh/appconfig +++ /dev/null @@ -1,54 +0,0 @@ -############################################################################ -# configs/detron/nsh/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nsh - -# NSH library - -CONFIGURED_APPS += nshlib - -# Networking support - -ifeq ($(CONFIG_NET),y) -CONFIGURED_APPS += netutils/uiplib -CONFIGURED_APPS += netutils/dhcpc -CONFIGURED_APPS += netutils/resolv -CONFIGURED_APPS += netutils/tftpc -CONFIGURED_APPS += netutils/webclient -endif - - diff --git a/nuttx/configs/detron/nsh/defconfig b/nuttx/configs/detron/nsh/defconfig deleted file mode 100755 index dc09521989..0000000000 --- a/nuttx/configs/detron/nsh/defconfig +++ /dev/null @@ -1,907 +0,0 @@ -############################################################################ -# configs/detron/nsh/defconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Authors: -# Decio Renno -# Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip familyl. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_DRAM_SIZE - Describes the installed DRAM. -# CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM -# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. -# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. -# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that -# cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until -# the delay actually is 100 seconds. -# CONFIG_ARCH_DMA - Support DMA initialization -# -CONFIG_ARCH=arm -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP=lpc17xx -CONFIG_ARCH_CHIP_LPC1768=y -CONFIG_ARCH_BOARD=detron -CONFIG_ARCH_BOARD_DETRON=y -CONFIG_BOARD_LOOPSPERMSEC=7982 -CONFIG_DRAM_SIZE=(32*1024) -CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=n -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=n -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n - -# -# Identify toolchain and linker options -# -CONFIG_LPC17_CODESOURCERYW=n -CONFIG_LPC17_CODESOURCERYL=n -CONFIG_LPC17_DEVKITARM=n -CONFIG_LPC17_BUILDROOT=y - -# -# Individual subsystems can be enabled: -# -# Individual subsystems can be enabled: -# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h) -# -CONFIG_LPC17_ETHERNET=n -CONFIG_LPC17_USBHOST=y -CONFIG_LPC17_USBOTG=n -CONFIG_LPC17_USBDEV=n -CONFIG_LPC17_UART0=y -CONFIG_LPC17_UART1=n -CONFIG_LPC17_UART2=n -CONFIG_LPC17_UART3=n -CONFIG_LPC17_CAN1=n -CONFIG_LPC17_CAN2=n -CONFIG_LPC17_SPI=n -CONFIG_LPC17_SSP0=n -CONFIG_LPC17_SSP1=n -CONFIG_LPC17_I2C0=n -CONFIG_LPC17_I2C1=n -CONFIG_LPC17_I2S=n -CONFIG_LPC17_TMR0=n -CONFIG_LPC17_TMR1=n -CONFIG_LPC17_TMR2=n -CONFIG_LPC17_TMR3=n -CONFIG_LPC17_RIT=n -CONFIG_LPC17_PWM=n -CONFIG_LPC17_MCPWM=n -CONFIG_LPC17_QEI=n -CONFIG_LPC17_RTC=n -CONFIG_LPC17_WDT=n -CONFIG_LPC17_ADC=n -CONFIG_LPC17_DAC=n -CONFIG_LPC17_GPDMA=n - -# -# LPC17xx specific serial device driver settings -# -# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the -# console and ttys0 (default is the UART1). -# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_UARTn_2STOP - Two stop bits -# -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART3_SERIAL_CONSOLE=n - -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART3_TXBUFSIZE=256 - -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART3_RXBUFSIZE=256 - -CONFIG_UART0_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART3_BAUD=115200 -CONFIG_UART1_BAUD=115200 - -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART3_BITS=8 - -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART3_PARITY=0 - -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 -CONFIG_UART3_2STOP=0 - -# -# LPC17xx specific PHY/Ethernet device driver settings -# -# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY -# CONFIG_PHY_AUTONEG - Enable auto-negotion -# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. -# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex -# CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb -# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 -# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 -# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is -# the higest priority. -# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). -# CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets. -# Also needs CONFIG_DEBUG. -# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs -# CONFIG_DEBUG. -# CONFIG_NET_HASH - Enable receipt of near-perfect match frames. -# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. -# Automatically set if CONFIG_NET_IGMP is selected. -# -CONFIG_PHY_KS8721=y -CONFIG_PHY_AUTONEG=y -CONFIG_PHY_SPEED100=n -CONFIG_PHY_FDUPLEX=y -CONFIG_NET_REGDEBUG=n - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_DEBUG_NET - enable network debug output -# CONFIG_DEBUG_USB - enable usb debug output -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. -# You would only need this if you are concerned about accurate -# time conversions in the past or in the distant future. -# CONFIG_JULIAN_TIME - Enables Julian time conversions. You -# would only need this if you are concerned about accurate -# time conversion in the distand past. You must also define -# CONFIG_GREGORIAN_TIME in order to use Julian time. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. -# This format will support execution of NuttX binaries located -# in a ROMFS filesystem (see examples/nxflat). -# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to -# handle delayed processing from interrupt handlers. This feature -# is required for some drivers but, if there are not complaints, -# can be safely disabled. The worker thread also performs -# garbage collection -- completing any delayed memory deallocations -# from interrupt handlers. If the worker thread is disabled, -# then that clean will be performed by the IDLE thread instead -# (which runs at the lowest of priority and may not be appropriate -# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE -# is enabled, then the following options can also be used: -# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker -# thread. Default: 50 -# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for -# work in units of microseconds. Default: 50*1000 (50 MS). -# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker -# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. -# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up -# the worker thread. Default: 4 -# -#CONFIG_APPS_DIR= -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_NET=n -CONFIG_DEBUG_USB=n -CONFIG_MM_REGIONS=2 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2011 -CONFIG_START_MONTH=3 -CONFIG_START_DAY=8 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=y -CONFIG_SCHED_WORKPRIORITY=50 -CONFIG_SCHED_WORKPERIOD=(50*1000) -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=4 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 - -# -# Filesystem configuration -# -# CONFIG_FS_FAT - Enable FAT filesystem support -# CONFIG_FAT_SECTORSIZE - Max supported sector size -# CONFIG_FS_ROMFS - Enable ROMFS filesystem support -# -CONFIG_FS_FAT=y -CONFIG_FS_ROMFS=n - -# -# SPI-based MMC/SD driver -# -# CONFIG_MMCSD_NSLOTS -# Number of MMC/SD slots supported by the driver -# CONFIG_MMCSD_READONLY -# Provide read-only access (default is read/write) -# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. -# Default is 20MHz. -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# Block driver buffering -# -# CONFIG_FS_READAHEAD -# Enable read-ahead buffering -# CONFIG_FS_WRITEBUFFER -# Enable write buffering -# -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n - -# -# SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until -# accept() is called. The size of the backlog is selected when listen() is called. -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates -# CONFIG_NET_WLAN - Enable or disable WLAN network interface -# -CONFIG_NET=y -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=2 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=y -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=y -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n -#CONFIG_NET_FWCACHE_SIZE=2 -CONFIG_NET_WLAN=y - -# -# UIP Network Utilities -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# USB Device Configuration -# -# CONFIG_USBDEV -# Enables USB device support -# CONFIG_USBDEV_ISOCHRONOUS -# Build in extra support for isochronous endpoints -# CONFIG_USBDEV_DUALSPEED -# Hardware handles high and full speed operation (USB 2.0) -# CONFIG_USBDEV_SELFPOWERED -# Will cause USB features to indicate that the device is -# self-powered -# CONFIG_USBDEV_MAXPOWER -# Maximum power consumption in mA -# CONFIG_USBDEV_TRACE -# Enables USB tracing for debug -# CONFIG_USBDEV_TRACE_NRECORDS -# Number of trace entries to remember -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# USB Host Configuration -# -# CONFIG_USBHOST -# Enables USB host support -# CONFIG_USBHOST_NPREALLOC -# Number of pre-allocated class instances -# CONFIG_USBHOST_BULK_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling bulk endpoint support -# CONFIG_USBHOST_INT_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling interrupt endpoint support -# CONFIG_USBHOST_ISOC_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling isochronous endpoint support -# -CONFIG_USBHOST=y -CONFIG_USBHOST_NPREALLOC=0 -CONFIG_USBHOST_BULK_DISABLE=n -CONFIG_USBHOST_INT_DISABLE=y -CONFIG_USBHOST_ISOC_DISABLE=y - -# -# LPC17xx USB Device Configuration -# -# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT -# Handle USB Start-Of-Frame events. -# Enable reading SOF from interrupt handler vs. simply reading on demand. -# Probably a bad idea... Unless there is some issue with sampling the SOF -# from hardware asynchronously. -# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT -# Enable high priority interrupts. I have no idea why you might want to -# do that -# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS -# Number of DMA descriptors to allocate in SRAM. -# CONFIG_LPC17_USBDEV_DMA -# Enable lpc17xx-specific DMA support -# -CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n -CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n -CONFIG_LPC17_USBDEV_DMA=n -CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0 -CONFIG_LPC17_USBDEV_DMAINTMASK=0 - -# -# LPC17xx USB Host Configuration -# -# OHCI RAM layout: -# CONFIG_USBHOST_OHCIRAM_SIZE -# Total size of OHCI RAM (in AHB SRAM Bank 1) -# CONFIG_USBHOST_NEDS -# Number of endpoint descriptors -# CONFIG_USBHOST_NTDS -# Number of transfer descriptors -# CONFIG_USBHOST_TDBUFFERS -# Number of transfer descriptor buffers -# CONFIG_USBHOST_TDBUFSIZE -# Size of one transfer descriptor buffer -# CONFIG_USBHOST_IOBUFSIZE -# Size of one end-user I/O buffer -# -CONFIG_USBHOST_OHCIRAM_SIZE=2048 -CONFIG_USBHOST_NEDS=2 -CONFIG_USBHOST_NTDS=2 -CONFIG_USBHOST_TDBUFFERS=3 -CONFIG_USBHOST_TDBUFSIZE=128 -CONFIG_USBHOST_IOBUFSIZE=512 - -# -# USB Serial Device Configuration -# -# CONFIG_USBSER -# Enable compilation of the USB serial driver -# CONFIG_USBSER_EPINTIN -# The logical 7-bit address of a hardware endpoint that supports -# interrupt IN operation -# CONFIG_USBSER_EPBULKOUT -# The logical 7-bit address of a hardware endpoint that supports -# bulk OUT operation -# CONFIG_USBSER_EPBULKIN -# The logical 7-bit address of a hardware endpoint that supports -# bulk IN operation -# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE -# Size of the serial receive/transmit buffers -# -CONFIG_USBSER=n -CONFIG_USBSER_EPINTIN=1 -CONFIG_USBSER_EPBULKOUT=2 -CONFIG_USBSER_EPBULKIN=5 -CONFIG_USBSER_NWRREQS=4 -CONFIG_USBSER_NRDREQS=4 -CONFIG_USBSER_VENDORID=0x067b -CONFIG_USBSER_PRODUCTID=0x2303 -CONFIG_USBSER_VENDORSTR="Nuttx" -CONFIG_USBSER_PRODUCTSTR="USBdev Serial" -CONFIG_USBSER_RXBUFSIZE=512 -CONFIG_USBSER_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -# CONFIG_USBSTRG -# Enable compilation of the USB storage driver -# CONFIG_USBSTRG_EP0MAXPACKET -# Max packet size for endpoint 0 -# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN -# The logical 7-bit address of a hardware endpoints that support -# bulk OUT and IN operations -# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN -# The size of the buffer in each write/read request. This -# value needs to be at least as large as the endpoint -# maxpacket and ideally as large as a block device sector. -# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSTRG_REMOVABLE -# Select if the media is removable -# -CONFIG_USBSTRG=n -CONFIG_USBSTRG_EP0MAXPACKET=64 -CONFIG_USBSTRG_EPBULKOUT=2 -CONFIG_USBSTRG_EPBULKIN=5 -CONFIG_USBSTRG_NRDREQS=2 -CONFIG_USBSTRG_NWRREQS=2 -CONFIG_USBSTRG_BULKINREQLEN=256 -CONFIG_USBSTRG_BULKOUTREQLEN=256 -CONFIG_USBSTRG_VENDORID=0x584e -CONFIG_USBSTRG_VENDORSTR="NuttX" -CONFIG_USBSTRG_PRODUCTID=0x5342 -CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage" -CONFIG_USBSTRG_VERSIONNO=0x0399 -CONFIG_USBSTRG_REMOVABLE=y - -# -# Settings for examples/uip -# -CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_UIP_DHCPC=n - -# -# Settings for examples/nettest -# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act -# as either the client side or server side of the test -# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the -# client side simply receives messages forever, allowing -# measurement of throughput -# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has -# no MAC address; one will be assigned -# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address -# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address -# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask -# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the -# client side of the test (may be target or host) -# -CONFIG_EXAMPLE_NETTEST_SERVER=n -CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLE_NETTEST_NOMAC=n -CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_STACKSIZE - Stack size to use for new threads. -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# CONFIG_NSH_ARCHINIT - Platform provides architecture -# specific initialization (nsh_archinitialize()). -# -# If CONFIG_NSH_TELNET is selected: -# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_NSH_DHCPC - Obtain address using DHCP -# CONFIG_NSH_IPADDR - Provides static IP address -# CONFIG_NSH_DRIPADDR - Provides static router IP address -# CONFIG_NSH_NETMASK - Provides static network mask -# CONFIG_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_NSH_ROMFSETC is selected: -# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_NSH_INITSCRIPT - Relative path to init script -# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_STACKSIZE=2048 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=y -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT=/tmp - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# Settings for examples/usbserial -# -# CONFIG_EXAMPLES_USBSERIAL_INONLY -# Only verify IN (device-to-host) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_OUTONLY -# Only verify OUT (host-to-device) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL -# Send only small, single packet messages. Default: Send large and small. -# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG -# Send only large, multi-packet messages. Default: Send large and small. -# -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - -# -# Settings for internet_radio by Decio -# -CONFIG_INTERNETRADIO_ARCHINIT=n - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# (should also be =n for the LPC17xx which always runs from flash) -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= - -# -# USB WLAN device identification -# -CONFIG_USB_WLAN_VID=0x0bda -CONFIG_USB_WLAN_PID=0x8189 diff --git a/nuttx/configs/detron/nsh/ld.script b/nuttx/configs/detron/nsh/ld.script deleted file mode 100755 index 74add69309..0000000000 --- a/nuttx/configs/detron/nsh/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/detron/nsh/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .ARM.exidx : { - __exidx_start = ABSOLUTE(.); - *(.ARM.exidx*) - __exidx_end = ABSOLUTE(.); - } >sram - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/detron/nsh/setenv.sh b/nuttx/configs/detron/nsh/setenv.sh deleted file mode 100755 index 5971509ba4..0000000000 --- a/nuttx/configs/detron/nsh/setenv.sh +++ /dev/null @@ -1,46 +0,0 @@ -#!/bin/bash -# configs/detron/nsh/setenv.sh -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" -export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/nuttx/configs/detron/ostest/Make.defs b/nuttx/configs/detron/ostest/Make.defs deleted file mode 100755 index f3426f0bce..0000000000 --- a/nuttx/configs/detron/ostest/Make.defs +++ /dev/null @@ -1,162 +0,0 @@ -############################################################################ -# configs/detron/ostest/Make.defs -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config - -# Setup for the selected toolchain - -ifeq ($(CONFIG_LPC17_CODESOURCERYW),y) - # CodeSourcery under Windows - CROSSDEV = arm-none-eabi- - WINTOOL = y - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -endif -ifeq ($(CONFIG_LPC17_CODESOURCERYL),y) - # CodeSourcery under Linux - CROSSDEV = arm-none-eabi- - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft - MAXOPTIMIZATION = -O2 -endif -ifeq ($(CONFIG_LPC17_DEVKITARM),y) - # devkitARM under Windows - CROSSDEV = arm-eabi- - WINTOOL = y - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -endif -ifeq ($(CONFIG_LPC17_BUILDROOT),y) - # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft - MAXOPTIMIZATION = -Os -endif - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/winlink.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}" - MAXOPTIMIZATION = -O2 -else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") - ARCHOPTIMIZATION = -g -else - ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - -define PREPROCESS - @echo "CPP: $1->$2" - @$(CPP) $(CPPFLAGS) $1 -o $2 -endef - -define COMPILE - @echo "CC: $1" - @$(CC) -c $(CFLAGS) $1 -o $2 -endef - -define COMPILEXX - @echo "CXX: $1" - @$(CXX) -c $(CXXFLAGS) $1 -o $2 -endef - -define ASSEMBLE - @echo "AS: $1" - @$(CC) -c $(AFLAGS) $1 -o $2 -endef - -define ARCHIVE - echo "AR: $2"; \ - $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; } -endef - -define CLEAN - @rm -f *.o *.a -endef - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/nuttx/configs/detron/ostest/appconfig b/nuttx/configs/detron/ostest/appconfig deleted file mode 100644 index c3525c0ae3..0000000000 --- a/nuttx/configs/detron/ostest/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/detron/ostest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/ostest - diff --git a/nuttx/configs/detron/ostest/defconfig b/nuttx/configs/detron/ostest/defconfig deleted file mode 100755 index 4b8ef06cfd..0000000000 --- a/nuttx/configs/detron/ostest/defconfig +++ /dev/null @@ -1,828 +0,0 @@ -############################################################################ -# configs/detron/ostest/defconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip familyl. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_DRAM_SIZE - Describes the installed DRAM. -# CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM -# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. -# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. -# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that -# cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until -# the delay actually is 100 seconds. -# CONFIG_ARCH_DMA - Support DMA initialization -# -CONFIG_ARCH=arm -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP=lpc17xx -CONFIG_ARCH_CHIP_LPC1768=y -CONFIG_ARCH_BOARD=detron -CONFIG_ARCH_BOARD_DETRON=y -CONFIG_BOARD_LOOPSPERMSEC=7982 -CONFIG_DRAM_SIZE=(32*1024) -CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=n -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=n -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n - -# -# Identify toolchain and linker options -# -CONFIG_LPC17_CODESOURCERYW=n -CONFIG_LPC17_CODESOURCERYL=n -CONFIG_LPC17_DEVKITARM=n -CONFIG_LPC17_BUILDROOT=y - -# -# Individual subsystems can be enabled: -# -# Individual subsystems can be enabled: -# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h) -CONFIG_LPC17_ETHERNET=n -CONFIG_LPC17_USBHOST=n -CONFIG_LPC17_USBOTG=n -CONFIG_LPC17_USBDEV=n -CONFIG_LPC17_UART0=y -CONFIG_LPC17_UART1=n -CONFIG_LPC17_UART2=n -CONFIG_LPC17_UART3=n -CONFIG_LPC17_CAN1=n -CONFIG_LPC17_CAN2=n -CONFIG_LPC17_SPI=n -CONFIG_LPC17_SSP0=n -CONFIG_LPC17_SSP1=n -CONFIG_LPC17_I2C0=n -CONFIG_LPC17_I2C1=n -CONFIG_LPC17_I2S=n -CONFIG_LPC17_TMR0=n -CONFIG_LPC17_TMR1=n -CONFIG_LPC17_TMR2=n -CONFIG_LPC17_TMR3=n -CONFIG_LPC17_RIT=n -CONFIG_LPC17_PWM=n -CONFIG_LPC17_MCPWM=n -CONFIG_LPC17_QEI=n -CONFIG_LPC17_RTC=n -CONFIG_LPC17_WDT=n -CONFIG_LPC17_ADC=n -CONFIG_LPC17_DAC=n -CONFIG_LPC17_GPDMA=n - -# -# LPC17xx specific serial device driver settings -# -# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the -# console and ttys0 (default is the UART1). -# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_UARTn_2STOP - Two stop bits -# -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART3_SERIAL_CONSOLE=n - -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART3_TXBUFSIZE=256 - -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART3_RXBUFSIZE=256 - -CONFIG_UART0_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART3_BAUD=115200 -CONFIG_UART1_BAUD=115200 - -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART3_BITS=8 - -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART3_PARITY=0 - -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 -CONFIG_UART3_2STOP=0 - -# -# LPC17xx specific PHY/Ethernet device driver settings -# -# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY -# CONFIG_PHY_AUTONEG - Enable auto-negotion -# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. -# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex -# CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb -# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 -# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 -# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is -# the higest priority. -# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). -# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs -# CONFIG_DEBUG. -# CONFIG_NET_HASH - Enable receipt of near-perfect match frames. -# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. -# Automatically set if CONFIG_NET_IGMP is selected. -# -CONFIG_PHY_KS8721=y -CONFIG_PHY_AUTONEG=y -CONFIG_PHY_SPEED100=n -CONFIG_PHY_FDUPLEX=y - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. -# You would only need this if you are concerned about accurate -# time conversions in the past or in the distant future. -# CONFIG_JULIAN_TIME - Enables Julian time conversions. You -# would only need this if you are concerned about accurate -# time conversion in the distand past. You must also define -# CONFIG_GREGORIAN_TIME in order to use Julian time. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. -# This format will support execution of NuttX binaries located -# in a ROMFS filesystem (see examples/nxflat). -# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to -# handle delayed processing from interrupt handlers. This feature -# is required for some drivers but, if there are not complaints, -# can be safely disabled. The worker thread also performs -# garbage collection -- completing any delayed memory deallocations -# from interrupt handlers. If the worker thread is disabled, -# then that clean will be performed by the IDLE thread instead -# (which runs at the lowest of priority and may not be appropriate -# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE -# is enabled, then the following options can also be used: -# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker -# thread. Default: 50 -# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for -# work in units of microseconds. Default: 50*1000 (50 MS). -# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker -# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. -# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up -# the worker thread. Default: 4 -# -#CONFIG_APPS_DIR= -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=2 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2010 -CONFIG_START_MONTH=6 -CONFIG_START_DAY=20 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=50 -CONFIG_SCHED_WORKPERIOD=(50*1000) -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=4 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=y -CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 - -# -# Filesystem configuration -# -# CONFIG_FS_FAT - Enable FAT filesystem support -# CONFIG_FAT_SECTORSIZE - Max supported sector size -# CONFIG_FS_ROMFS - Enable ROMFS filesystem support -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n - -# -# SPI-based MMC/SD driver -# -# CONFIG_MMCSD_NSLOTS -# Number of MMC/SD slots supported by the driver -# CONFIG_MMCSD_READONLY -# Provide read-only access (default is read/write) -# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. -# Default is 20MHz. -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# Block driver buffering -# -# CONFIG_FS_READAHEAD -# Enable read-ahead buffering -# CONFIG_FS_WRITEBUFFER -# Enable write buffering -# -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n - -# -# SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until -# accept() is called. The size of the backlog is selected when listen() is called. -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates -# -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n -#CONFIG_NET_FWCACHE_SIZE=2 - -# -# UIP Network Utilities -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# USB Device Configuration -# -# CONFIG_USBDEV -# Enables USB device support -# CONFIG_USBDEV_ISOCHRONOUS -# Build in extra support for isochronous endpoints -# CONFIG_USBDEV_DUALSPEED -# Hardware handles high and full speed operation (USB 2.0) -# CONFIG_USBDEV_SELFPOWERED -# Will cause USB features to indicate that the device is -# self-powered -# CONFIG_USBDEV_MAXPOWER -# Maximum power consumption in mA -# CONFIG_USBDEV_TRACE -# Enables USB tracing for debug -# CONFIG_USBDEV_TRACE_NRECORDS -# Number of trace entries to remember -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# LPC17xx USB Configuration -# -# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT -# Handle USB Start-Of-Frame events. -# Enable reading SOF from interrupt handler vs. simply reading on demand. -# Probably a bad idea... Unless there is some issue with sampling the SOF -# from hardware asynchronously. -# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT -# Enable high priority interrupts. I have no idea why you might want to -# do that -# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS -# Number of DMA descriptors to allocate in SRAM. -# CONFIG_LPC17_USBDEV_DMA -# Enable lpc17xx-specific DMA support -# -CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n -CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n -CONFIG_LPC17_USBDEV_DMA=n -CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0 -CONFIG_LPC17_USBDEV_DMAINTMASK=0 - -# -# USB Serial Device Configuration -# -# CONFIG_USBSER -# Enable compilation of the USB serial driver -# CONFIG_USBSER_EPINTIN -# The logical 7-bit address of a hardware endpoint that supports -# interrupt IN operation -# CONFIG_USBSER_EPBULKOUT -# The logical 7-bit address of a hardware endpoint that supports -# bulk OUT operation -# CONFIG_USBSER_EPBULKIN -# The logical 7-bit address of a hardware endpoint that supports -# bulk IN operation -# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE -# Size of the serial receive/transmit buffers -# -CONFIG_USBSER=n -CONFIG_USBSER_EPINTIN=1 -CONFIG_USBSER_EPBULKOUT=2 -CONFIG_USBSER_EPBULKIN=5 -CONFIG_USBSER_NWRREQS=4 -CONFIG_USBSER_NRDREQS=4 -CONFIG_USBSER_VENDORID=0x067b -CONFIG_USBSER_PRODUCTID=0x2303 -CONFIG_USBSER_VENDORSTR="Nuttx" -CONFIG_USBSER_PRODUCTSTR="USBdev Serial" -CONFIG_USBSER_RXBUFSIZE=512 -CONFIG_USBSER_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -# CONFIG_USBSTRG -# Enable compilation of the USB storage driver -# CONFIG_USBSTRG_EP0MAXPACKET -# Max packet size for endpoint 0 -# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN -# The logical 7-bit address of a hardware endpoints that support -# bulk OUT and IN operations -# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN -# The size of the buffer in each write/read request. This -# value needs to be at least as large as the endpoint -# maxpacket and ideally as large as a block device sector. -# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSTRG_REMOVABLE -# Select if the media is removable -# -CONFIG_USBSTRG=n -CONFIG_USBSTRG_EP0MAXPACKET=64 -CONFIG_USBSTRG_EPBULKOUT=2 -CONFIG_USBSTRG_EPBULKIN=5 -CONFIG_USBSTRG_NRDREQS=2 -CONFIG_USBSTRG_NWRREQS=2 -CONFIG_USBSTRG_BULKINREQLEN=256 -CONFIG_USBSTRG_BULKOUTREQLEN=256 -CONFIG_USBSTRG_VENDORID=0x584e -CONFIG_USBSTRG_VENDORSTR="NuttX" -CONFIG_USBSTRG_PRODUCTID=0x5342 -CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage" -CONFIG_USBSTRG_VERSIONNO=0x0399 -CONFIG_USBSTRG_REMOVABLE=y - -# -# Settings for examples/uip -# -CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_UIP_DHCPC=n - -# -# Settings for examples/nettest -CONFIG_EXAMPLE_NETTEST_SERVER=n -CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLE_NETTEST_NOMAC=n -CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_STACKSIZE - Stack size to use for new threads. -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# CONFIG_NSH_ARCHINIT - Platform provides architecture -# specific initialization (nsh_archinitialize()). -# -# If CONFIG_NSH_TELNET is selected: -# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_NSH_DHCPC - Obtain address using DHCP -# CONFIG_NSH_IPADDR - Provides static IP address -# CONFIG_NSH_DRIPADDR - Provides static router IP address -# CONFIG_NSH_NETMASK - Provides static network mask -# CONFIG_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_NSH_ROMFSETC is selected: -# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_NSH_INITSCRIPT - Relative path to init script -# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_STACKSIZE=2048 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT=/tmp - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# Settings for examples/usbserial -# -# CONFIG_EXAMPLES_USBSERIAL_INONLY -# Only verify IN (device-to-host) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_OUTONLY -# Only verify OUT (host-to-device) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL -# Send only small, single packet messages. Default: Send large and small. -# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG -# Send only large, multi-packet messages. Default: Send large and small. -# -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - -# -# Settings for internet_radio by Decio -# -CONFIG_INTERNETRADIO_ARCHINIT=n - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# (should also be =n for the LPC17xx which always runs from flash) -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= diff --git a/nuttx/configs/detron/ostest/ld.script b/nuttx/configs/detron/ostest/ld.script deleted file mode 100755 index d789905a3b..0000000000 --- a/nuttx/configs/detron/ostest/ld.script +++ /dev/null @@ -1,109 +0,0 @@ -/**************************************************************************** - * configs/detron/ostest/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .ARM.exidx : { - __exidx_start = ABSOLUTE(.); - *(.ARM.exidx*) - __exidx_end = ABSOLUTE(.); - } >sram - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/detron/ostest/setenv.sh b/nuttx/configs/detron/ostest/setenv.sh deleted file mode 100755 index ed5ee3796d..0000000000 --- a/nuttx/configs/detron/ostest/setenv.sh +++ /dev/null @@ -1,46 +0,0 @@ -#!/bin/bash -# configs/detron/ostest/setenv.sh -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" -export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}" diff --git a/nuttx/configs/detron/src/Makefile b/nuttx/configs/detron/src/Makefile deleted file mode 100755 index 41719d4ee3..0000000000 --- a/nuttx/configs/detron/src/Makefile +++ /dev/null @@ -1,87 +0,0 @@ -############################################################################ -# configs/detron/src/Makefile -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - --include $(TOPDIR)/Make.defs - -CFLAGS += -I$(TOPDIR)/sched - -ASRCS = -CSRCS = up_boot.c -ifeq ($(CONFIG_NSH_ARCHINIT),y) -CSRCS += up_nsh.c -endif - -AOBJS = $(ASRCS:.S=$(OBJEXT)) -COBJS = $(CSRCS:.c=$(OBJEXT)) - -SRCS = $(ASRCS) $(CSRCS) -OBJS = $(AOBJS) $(COBJS) - -ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src -ifeq ($(WINTOOL),y) - CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ - -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ - -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" -else - CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m -endif - -all: libboard$(LIBEXT) - -$(AOBJS): %$(OBJEXT): %.S - $(call ASSEMBLE, $<, $@) - -$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c - $(call COMPILE, $<, $@) - -libboard$(LIBEXT): $(OBJS) - @( for obj in $(OBJS) ; do \ - $(call ARCHIVE, $@, $${obj}); \ - done ; ) - -.depend: Makefile $(SRCS) - @$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep - @touch $@ - -depend: .depend - -clean: - @rm -f libboard$(LIBEXT) *~ .*.swp - $(call CLEAN) - -distclean: clean - @rm -f Make.dep .depend - --include Make.dep diff --git a/nuttx/configs/detron/src/detron_internal.h b/nuttx/configs/detron/src/detron_internal.h deleted file mode 100755 index 10ffc0076a..0000000000 --- a/nuttx/configs/detron/src/detron_internal.h +++ /dev/null @@ -1,159 +0,0 @@ -/************************************************************************************ - * configs/detron/src/detron_internal.h - * arch/arm/src/board/detron_internal.n - * - * Copyright (C) 2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * - * Pin used in the Internet Radio Detron Board - * - * Graphic Display - * - * Pin Port Function - * 58 P0(20) DI - * 59 P0(19) RW - * 49 P0(11) ENABLE - * 78 P0(7) D0 - * 79 P0(6) D1 - * 78 P0(5) D2 - * 81 P0(4) D3 - * 94 P1(1) D4 - * 95 P1(0) D5 - * 47 P0(1) D6 - * 46 P0(0) D7 - * - * VS1003 - * - * Pin Port Function - * 65 P2(8) xreset - * 85 P4(29) dreq - * 82 P4(28) xdcs - * 63 P0(16) xcs - * 62 P0(15) sclk - * 60 P0(18) si - * 61 P0(17) so - * - * Botoes do painel - * - * 85 Chave pulsada 1 P4(29) - * 87 Chave Pulsada 2 P1(16) - * 88 Chave pulsada centro P1(15) - * - * USB - * - * Pin Port Function - * 29 D+ - * 30 D- - */ - -#ifndef _CONFIGS_DETRON_SRC_DETRON_INTERNAL_H -#define _CONFIGS_DETRON_SRC_DETRON_INTERNAL_H - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include -#include -#include - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/* Detron GPIO Pin Definitions ******************************************************/ -/* Pinos do Display grafico */ - -#define pin_di (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN20) -#define pin_rw (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN19) -#define pin_enable (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN11) -#define pin_d0 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN7) -#define pin_d1 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN6) -#define pin_d2 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN5) -#define pin_d3 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN4) -#define pin_d4 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT1 | GPIO_PIN1) -#define pin_d5 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT1 | GPIO_PIN0) -#define pin_d6 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN1) -#define pin_d7 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN0) -#define pin_cs1 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN10) -#define pin_cs2 (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN9) -#define pin_rst (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN8) - -/* VS1003 pins - * xdcs = SPI in mode SDI (data) - * xcs = SPI in mode SCI (comand) - * - * sclk = SPI clock - * si = SPI in - * so = SPI out - * - * dreq = SPI status 1 - free 0 - busy - * xreset = hardware reset - */ - -#define pin_vs1003_xreset (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN8) -#define pin_vs1003_dreq (GPIO_INPUT | GPIO_VALUE_ZERO | GPIO_PORT4 | GPIO_PIN29) -#define pin_vs1003_xdcs (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT4 | GPIO_PIN28) -#define pin_vs1003_xcs (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN16) -#define pin_vs1003_sclk (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN15) -#define pin_vs1003_si (GPIO_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN18) -#define pin_vs1003_so (GPIO_INPUT | GPIO_VALUE_ZERO | GPIO_PORT0 | GPIO_PIN17) - -/* Pinos do painel */ - -#define pin_panel_center (GPIO_INPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN3) -#define pin_panel_pulse_up (GPIO_INPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN4) -#define pin_panel_pulse_down (GPIO_INPUT | GPIO_VALUE_ZERO | GPIO_PORT2 | GPIO_PIN5) - -#define IRQ_pin_panel_center LPC17_IRQ_P2p3 -#define IRQ_pin_panel_pulse_up LPC17_IRQ_P2p4 -#define IRQ_pin_panel_pulse_down LPC17_IRQ_P2p5 - -/************************************************************************************ - * Public Types - ************************************************************************************/ - -/************************************************************************************ - * Public data - ************************************************************************************/ - -#ifndef __ASSEMBLY__ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -#endif /* __ASSEMBLY__ */ -#endif /* _CONFIGS_DETRON_SRC_DETRON_INTERNAL_H */ - diff --git a/nuttx/configs/detron/src/up_boot.c b/nuttx/configs/detron/src/up_boot.c deleted file mode 100755 index 3719c86351..0000000000 --- a/nuttx/configs/detron/src/up_boot.c +++ /dev/null @@ -1,77 +0,0 @@ -/************************************************************************************ - * configs/detron/src/up_boot.c - * arch/arm/src/board/up_boot.c - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include - -#include - -#include - -#include "up_arch.h" -#include "up_internal.h" - -#include "lpc17_internal.h" -#include "detron_internal.h" - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: lpc17_boardinitialize - * - * Description: - * All LPC17xx architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured - * and mapped but before any devices have been initialized. - * - ************************************************************************************/ - -void lpc17_boardinitialize(void) -{ -} diff --git a/nuttx/configs/detron/src/up_buttons.c b/nuttx/configs/detron/src/up_buttons.c deleted file mode 100644 index 66c1f53512..0000000000 --- a/nuttx/configs/detron/src/up_buttons.c +++ /dev/null @@ -1,180 +0,0 @@ -/**************************************************************************** - * configs/detron/src/up_buttons.c - * - * Copyright (C) 2010 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include - -#include - -#include - -#include -#include - -#include "lpc17_internal.h" -#include "detron_internal.h" - -/**************************************************************************** - * Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -static xcpt_t g_irq_pin_panel_pulse_up; -static xcpt_t g_irq_pin_panel_pulse_down; -static xcpt_t g_irq_pin_panel_center; - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_buttoninit - ****************************************************************************/ - -void up_buttoninit(void) -{ - lpc17_configgpio(pin_panel_pulse_up); - lpc17_configgpio(pin_panel_pulse_down); - lpc17_configgpio(pin_panel_center); -} - -/**************************************************************************** - * Name: up_buttons - ****************************************************************************/ - -uint8_t up_buttons(void) -{ - uint8_t retval; - - retval = lpc17_gpioread(pin_panel_pulse_up) ? 0 : pin_panel_pulse_up; - retval |= lpc17_gpioread(pin_panel_pulse_down) ? 0 : pin_panel_pulse_down; - retval |= lpc17_gpioread(pin_panel_center) ? 0 : pin_panel_center; - return retval; -} - -/**************************************************************************** - * Name: up_irq_pin_panel_pulse_up - ****************************************************************************/ - -xcpt_t up_irq_pin_panel_pulse_up(xcpt_t irqhandler) -{ - xcpt_t oldhandler; - irqstate_t flags; - - /* Get the old button interrupt handler and save the new one */ - - oldhandler = g_irq_pin_panel_pulse_up; - g_irq_pin_panel_pulse_up = irqhandler; - - /* Disable interrupts until we are done */ - - flags = irqsave(); - - /* Configure the interrupt */ - - (void)irq_attach(IRQ_pin_panel_pulse_up, irqhandler); - up_enable_irq(IRQ_pin_panel_pulse_up); - - irqrestore(flags); - - return oldhandler; -} - -/**************************************************************************** - * Name: up_irq_pin_panel_pulse_down - * ****************************************************************************/ - -xcpt_t up_irq_pin_panel_pulse_down(xcpt_t irqhandler) -{ - xcpt_t oldhandler; - irqstate_t flags; - - /* Get the old button interrupt handler and save the new one */ - - oldhandler = g_irq_pin_panel_pulse_down; - g_irq_pin_panel_pulse_down = irqhandler; - - /* Disable interrupts until we are done */ - - flags = irqsave(); - - /* Configure the interrupt */ - - (void)irq_attach(IRQ_pin_panel_pulse_down, irqhandler); - up_enable_irq(IRQ_pin_panel_pulse_down); - - irqrestore(flags); - - return oldhandler; -} - -/**************************************************************************** - * Name: up_irq_pin_panel_center - * ****************************************************************************/ - -xcpt_t up_irq_pin_panel_center(xcpt_t irqhandler) -{ - xcpt_t oldhandler; - irqstate_t flags; - - /* Get the old button interrupt handler and save the new one */ - - oldhandler = g_irq_pin_panel_center; - g_irq_pin_panel_center = irqhandler; - - /* Disable interrupts until we are done */ - - flags = irqsave(); - - /* Configure the interrupt */ - - (void)irq_attach(IRQ_pin_panel_center, irqhandler); - up_enable_irq(IRQ_pin_panel_center); - - irqrestore(flags); - - return oldhandler; -} - diff --git a/nuttx/configs/detron/src/up_nsh.c b/nuttx/configs/detron/src/up_nsh.c deleted file mode 100755 index 5a74f8d739..0000000000 --- a/nuttx/configs/detron/src/up_nsh.c +++ /dev/null @@ -1,324 +0,0 @@ -/**************************************************************************** - * config/detron/src/up_nsh.c - * arch/arm/src/board/up_nsh.c - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include "lpc17_internal.h" -#include "detron_internal.h" - -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ - -/* Configuration ************************************************************/ - -#ifdef CONFIG_ARCH_BOARD_DETRON -# undef CONFIG_NSH_HAVEMMCSD -# define CONFIG_NSH_HAVEUSBHOST 1 -#else -# error "Unrecognized board" -# undef CONFIG_NSH_HAVEMMCSD -# undef CONFIG_NSH_HAVEUSBHOST -#endif - -/* Can't support MMC/SD features if mountpoints are disabled */ - -#if defined(CONFIG_DISABLE_MOUNTPOINT) -# undef CONFIG_NSH_HAVEMMCSD -#endif - -/* MMC/SD PORT and SLOT number probably depend on the board configuration */ - -#ifdef CONFIG_NSH_HAVEMMCSD -# if !defined(CONFIG_NSH_MMCSDSPIPORTNO) || CONFIG_NSH_MMCSDSPIPORTNO != 0 -# error "The Detron MMC/SD is on SSP0" -# undef CONFIG_NSH_MMCSDSPIPORTNO -# define CONFIG_NSH_MMCSDSPIPORTNO 0 -# endif -# if !defined(CONFIG_NSH_MMCSDSLOTNO) || CONFIG_NSH_MMCSDSLOTNO != 0 -# error "The Detron MMC/SD is only one slot (0)" -# undef CONFIG_NSH_MMCSDSLOTNO -# define CONFIG_NSH_MMCSDSLOTNO 0 -# endif -#endif - -#ifndef CONFIG_NSH_MMCSDMINOR -# define CONFIG_NSH_MMCSDMINOR 0 -#endif - -/* USB Host */ - -#ifdef CONFIG_USBHOST -# ifndef CONFIG_LPC17_USBHOST -# error "CONFIG_LPC17_USBHOST is not selected" -# endif -#endif - -#ifdef CONFIG_LPC17_USBHOST -# ifndef CONFIG_USBHOST -# warning "CONFIG_USBHOST is not selected" -# endif -#endif - -#if !defined(CONFIG_USBHOST) || !defined(CONFIG_LPC17_USBHOST) -# undef CONFIG_NSH_HAVEUSBHOST -#endif - -#ifdef CONFIG_NSH_HAVEUSBHOST -# ifndef CONFIG_USBHOST_DEFPRIO -# define CONFIG_USBHOST_DEFPRIO 50 -# endif -# ifndef CONFIG_USBHOST_STACKSIZE -# define CONFIG_USBHOST_STACKSIZE 1024 -# endif -#endif - -/* Debug ********************************************************************/ - -#ifdef CONFIG_CPP_HAVE_VARARGS -# ifdef CONFIG_DEBUG -# define message(...) lib_lowprintf(__VA_ARGS__) -# else -# define message(...) printf(__VA_ARGS__) -# endif -#else -# ifdef CONFIG_DEBUG -# define message lib_lowprintf -# else -# define message printf -# endif -#endif - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -#ifdef CONFIG_NSH_HAVEUSBHOST -static struct usbhost_driver_s *g_drvr; -#endif - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nsh_waiter - * - * Description: - * Wait for USB devices to be connected. - * - ****************************************************************************/ - -#ifdef CONFIG_NSH_HAVEUSBHOST -static int nsh_waiter(int argc, char *argv[]) -{ - bool connected = false; - int ret; - - message("nsh_waiter: Running\n"); - for (;;) - { - /* Wait for the device to change state */ - - ret = DRVR_WAIT(g_drvr, connected); - DEBUGASSERT(ret == OK); - - connected = !connected; - message("nsh_waiter: %s\n", connected ? "connected" : "disconnected"); - - /* Did we just become connected? */ - - if (connected) - { - /* Yes.. enumerate the newly connected device */ - - (void)DRVR_ENUMERATE(g_drvr); - } - } - - /* Keep the compiler from complaining */ - - return 0; -} -#endif - -/**************************************************************************** - * Name: nsh_usbhostinitialize - * - * Description: - * Initialize SPI-based microSD. - * - ****************************************************************************/ - -#ifdef CONFIG_NSH_HAVEUSBHOST -static int nsh_usbhostinitialize(void) -{ - int pid; - int ret; - - /* First, register all of the class drivers needed to support the drivers - * that we care about: - */ - - message("nsh_usbhostinitialize: Register class drivers\n"); - ret = usbhost_storageinit(); - if (ret != OK) - { - message("nsh_usbhostinitialize: Failed to register the mass storage class\n"); - } - - message("nsh_usbhostinitialize: Register device specific drivers\n"); - ret = usbhost_wlaninit(); - if (ret != OK) - { - message("nsh_usbhostinitialize: Failed to register the WLAN device\n"); - } - - /* Then get an instance of the USB host interface */ - - message("nsh_usbhostinitialize: Initialize USB host\n"); - g_drvr = usbhost_initialize(0); - if (g_drvr) - { - /* Start a thread to handle device connection. */ - - message("nsh_usbhostinitialize: Start nsh_waiter\n"); - -#ifndef CONFIG_CUSTOM_STACK - pid = task_create("usbhost", CONFIG_USBHOST_DEFPRIO, - CONFIG_USBHOST_STACKSIZE, - (main_t)nsh_waiter, (const char **)NULL); -#else - pid = task_create("usbhost", CONFIG_USBHOST_DEFPRIO, - (main_t)nsh_waiter, (const char **)NULL); -#endif - return pid < 0 ? -ENOEXEC : OK; - } - return -ENODEV; -} -#else -# define nsh_usbhostinitialize() (OK) -#endif - -/**************************************************************************** - * Name: nsh_sdinitialize - * - * Description: - * Initialize SPI-based microSD. - * - ****************************************************************************/ - -#ifdef CONFIG_NSH_HAVEMMCSD -int nsh_sdinitialize(void) -{ - FAR struct spi_dev_s *ssp; - int ret; - - /* Get the SSP port */ - - ssp = up_spiinitialize(CONFIG_NSH_MMCSDSPIPORTNO); - if (!ssp) - { - message("nsh_archinitialize: Failed to initialize SSP port %d\n", - CONFIG_NSH_MMCSDSPIPORTNO); - return -ENODEV; - } - - message("Successfully initialized SSP port %d\n", - CONFIG_NSH_MMCSDSPIPORTNO); - - /* Bind the SSP port to the slot */ - - ret = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, ssp); - if (ret < 0) - { - message("nsh_archinitialize: Failed to bind SSP port %d to MMC/SD slot %d: %d\n", - CONFIG_NSH_MMCSDSPIPORTNO, CONFIG_NSH_MMCSDSLOTNO, ret); - return ret; - } - - message("Successfuly bound SSP port %d to MMC/SD slot %d\n", - CONFIG_NSH_MMCSDSPIPORTNO, CONFIG_NSH_MMCSDSLOTNO); - return OK; -} -#else -# define nsh_sdinitialize() (OK) -#endif - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nsh_archinitialize - * - * Description: - * Perform architecture specific initialization - * - ****************************************************************************/ - -int nsh_archinitialize(void) -{ - int ret; - - /* Initialize SPI-based microSD */ - - ret = nsh_sdinitialize(); - if (ret == OK) - { - /* Initialize USB host */ - - ret = nsh_usbhostinitialize(); - if (ret == OK) - { - message("USB host successfuly initialized!\n"); - } - } - return ret; -} diff --git a/nuttx/configs/detron/wlan/Make.defs b/nuttx/configs/detron/wlan/Make.defs deleted file mode 100755 index ff8e24eaea..0000000000 --- a/nuttx/configs/detron/wlan/Make.defs +++ /dev/null @@ -1,163 +0,0 @@ -############################################################################ -# configs/detron/wlan/Make.defs -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Authors: Gregory Nutt -# Rafael Noronha -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config - -# Setup for the selected toolchain - -ifeq ($(CONFIG_LPC17_CODESOURCERYW),y) - # CodeSourcery under Windows - CROSSDEV = arm-none-eabi- - WINTOOL = y - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -endif -ifeq ($(CONFIG_LPC17_CODESOURCERYL),y) - # CodeSourcery under Linux - CROSSDEV = arm-none-eabi- - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft - MAXOPTIMIZATION = -O2 -endif -ifeq ($(CONFIG_LPC17_DEVKITARM),y) - # devkitARM under Windows - CROSSDEV = arm-eabi- - WINTOOL = y - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft -endif -ifeq ($(CONFIG_LPC17_BUILDROOT),y) - # NuttX buildroot under Linux or Cygwin - CROSSDEV = arm-elf- - ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft - MAXOPTIMIZATION = -Os -endif - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/winlink.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/wlan/ld.script}" - MAXOPTIMIZATION = -O2 -else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/wlan/ld.script -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ("${CONFIG_DEBUG_SYMBOLS}","y") - ARCHOPTIMIZATION = -g -else - ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - -define PREPROCESS - @echo "CPP: $1->$2" - @$(CPP) $(CPPFLAGS) $1 -o $2 -endef - -define COMPILE - @echo "CC: $1" - @$(CC) -c $(CFLAGS) $1 -o $2 -endef - -define COMPILEXX - @echo "CXX: $1" - @$(CXX) -c $(CXXFLAGS) $1 -o $2 -endef - -define ASSEMBLE - @echo "AS: $1" - @$(CC) -c $(AFLAGS) $1 -o $2 -endef - -define ARCHIVE - echo "AR: $2"; \ - $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; } -endef - -define CLEAN - @rm -f *.o *.a -endef - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = - diff --git a/nuttx/configs/detron/wlan/appconfig b/nuttx/configs/detron/wlan/appconfig deleted file mode 100644 index d08f73002b..0000000000 --- a/nuttx/configs/detron/wlan/appconfig +++ /dev/null @@ -1,43 +0,0 @@ -############################################################################ -# configs/detron/wlan/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/wlan - -# Networking support - -CONFIGURED_APPS += netutils/uiplib - diff --git a/nuttx/configs/detron/wlan/defconfig b/nuttx/configs/detron/wlan/defconfig deleted file mode 100755 index 3eb7d82d54..0000000000 --- a/nuttx/configs/detron/wlan/defconfig +++ /dev/null @@ -1,919 +0,0 @@ -############################################################################ -# configs/detron/wlan/defconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Authors: Gregory Nutt -# Rafael Noronha -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# architecture selection -# -# CONFIG_ARCH - identifies the arch subdirectory and, hence, the -# processor architecture. -# CONFIG_ARCH_family - for use in C code. This identifies the -# particular chip family that the architecture is implemented -# in. -# CONFIG_ARCH_architecture - for use in C code. This identifies the -# specific architecture within the chip familyl. -# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory -# CONFIG_ARCH_CHIP_name - For use in C code -# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, -# the board that supports the particular chip or SoC. -# CONFIG_ARCH_BOARD_name - for use in C code -# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) -# CONFIG_BOARD_LOOPSPERMSEC - for delay loops -# CONFIG_DRAM_SIZE - Describes the installed DRAM. -# CONFIG_DRAM_START - The start address of DRAM (physical) -# CONFIG_DRAM_END - Last address+1 of installed RAM -# CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization -# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt -# stack. If defined, this symbol is the size of the interrupt -# stack in bytes. If not defined, the user task stacks will be -# used during interrupt handling. -# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions -# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. -# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. -# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. -# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that -# cause a 100 second delay during boot-up. This 100 second delay -# serves no purpose other than it allows you to calibrate -# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure -# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until -# the delay actually is 100 seconds. -# CONFIG_ARCH_DMA - Support DMA initialization -# -CONFIG_ARCH=arm -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP=lpc17xx -CONFIG_ARCH_CHIP_LPC1768=y -CONFIG_ARCH_BOARD=detron -CONFIG_ARCH_BOARD_DETRON=y -CONFIG_BOARD_LOOPSPERMSEC=7982 -CONFIG_DRAM_SIZE=(32*1024) -CONFIG_DRAM_START=0x10000000 -CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=n -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=n -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n - -# -# Identify toolchain and linker options -# -CONFIG_LPC17_CODESOURCERYW=n -CONFIG_LPC17_CODESOURCERYL=n -CONFIG_LPC17_DEVKITARM=n -CONFIG_LPC17_BUILDROOT=y - -# -# Individual subsystems can be enabled: -# -# Individual subsystems can be enabled: -# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h) -# -CONFIG_LPC17_ETHERNET=n -CONFIG_LPC17_USBHOST=y -CONFIG_LPC17_USBOTG=n -CONFIG_LPC17_USBDEV=n -CONFIG_LPC17_UART0=y -CONFIG_LPC17_UART1=n -CONFIG_LPC17_UART2=n -CONFIG_LPC17_UART3=n -CONFIG_LPC17_CAN1=n -CONFIG_LPC17_CAN2=n -CONFIG_LPC17_SPI=n -CONFIG_LPC17_SSP0=n -CONFIG_LPC17_SSP1=n -CONFIG_LPC17_I2C0=n -CONFIG_LPC17_I2C1=n -CONFIG_LPC17_I2S=n -CONFIG_LPC17_TMR0=n -CONFIG_LPC17_TMR1=n -CONFIG_LPC17_TMR2=n -CONFIG_LPC17_TMR3=n -CONFIG_LPC17_RIT=n -CONFIG_LPC17_PWM=n -CONFIG_LPC17_MCPWM=n -CONFIG_LPC17_QEI=n -CONFIG_LPC17_RTC=n -CONFIG_LPC17_WDT=n -CONFIG_LPC17_ADC=n -CONFIG_LPC17_DAC=n -CONFIG_LPC17_GPDMA=n - -# -# LPC17xx specific serial device driver settings -# -# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the -# console and ttys0 (default is the UART1). -# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. -# This specific the size of the receive buffer -# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before -# being sent. This specific the size of the transmit buffer -# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be -# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. -# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity -# CONFIG_UARTn_2STOP - Two stop bits -# -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART3_SERIAL_CONSOLE=n - -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART3_TXBUFSIZE=256 - -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART3_RXBUFSIZE=256 - -CONFIG_UART0_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART3_BAUD=115200 -CONFIG_UART1_BAUD=115200 - -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART3_BITS=8 - -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART3_PARITY=0 - -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 -CONFIG_UART2_2STOP=0 -CONFIG_UART3_2STOP=0 - -# -# LPC17xx specific PHY/Ethernet device driver settings -# -# CONFIG_PHY_KS8721 - Selects Micrel KS8721 PHY -# CONFIG_PHY_AUTONEG - Enable auto-negotion -# CONFIG_PHY_SPEED100 - Select 100Mbit vs. 10Mbit speed. -# CONFIG_PHY_FDUPLEX - Select full (vs. half) duplex -# CONFIG_NET_EMACRAM_SIZE - Size of EMAC RAM. Default: 16Kb -# CONFIG_NET_NTXDESC - Configured number of Tx descriptors. Default: 18 -# CONFIG_NET_NRXDESC - Configured number of Rx descriptors. Default: 18 -# CONFIG_NET_PRIORITY - Ethernet interrupt priority. The is default is -# the higest priority. -# CONFIG_NET_WOL - Enable Wake-up on Lan (not fully implemented). -# CONFIG_NET_DUMPPACKET - Dump all received and transmitted packets. -# Also needs CONFIG_DEBUG. -# CONFIG_NET_REGDEBUG - Enabled low level register debug. Also needs -# CONFIG_DEBUG. -# CONFIG_NET_HASH - Enable receipt of near-perfect match frames. -# CONFIG_NET_MULTICAST - Enable receipt of multicast (and unicast) frames. -# Automatically set if CONFIG_NET_IGMP is selected. -# -CONFIG_PHY_KS8721=y -CONFIG_PHY_AUTONEG=y -CONFIG_PHY_SPEED100=n -CONFIG_PHY_FDUPLEX=y -CONFIG_NET_REGDEBUG=n - -# -# General build options -# -# CONFIG_RRLOAD_BINARY - make the rrload binary format used with -# BSPs from www.ridgerun.com using the tools/mkimage.sh script -# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format -# used with many different loaders using the GNU objcopy program -# Should not be selected if you are not using the GNU toolchain. -# CONFIG_RAW_BINARY - make a raw binary format file used with many -# different loaders using the GNU objcopy program. This option -# should not be selected if you are not using the GNU toolchain. -# CONFIG_HAVE_LIBM - toolchain supports libm.a -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n -CONFIG_HAVE_LIBM=n - -# -# General OS setup -# -# CONFIG_APPS_DIR - Identifies the relative path to the directory -# that builds the application to link with NuttX. Default: ../apps -# CONFIG_DEBUG - enables built-in debug options -# CONFIG_DEBUG_VERBOSE - enables verbose debug output -# CONFIG_DEBUG_SYMBOLS - build without optimization and with -# debug symbols (needed for use with a debugger). -# CONFIG_DEBUG_NET - enable network debug output -# CONFIG_DEBUG_USB - enable usb debug output -# CONFIG_MM_REGIONS - If the architecture includes multiple -# regions of memory to allocate from, this specifies the -# number of memory regions that the memory manager must -# handle and enables the API mm_addregion(start, end); -# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot -# time console output -# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz -# or MSEC_PER_TICK=10. This setting may be defined to -# inform NuttX that the processor hardware is providing -# system timer interrupts at some interrupt interval other -# than 10 msec. -# CONFIG_RR_INTERVAL - The round robin timeslice will be set -# this number of milliseconds; Round robin scheduling can -# be disabled by setting this value to zero. -# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in -# scheduler to monitor system performance -# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a -# task name to save in the TCB. Useful if scheduler -# instrumentation is selected. Set to zero to disable. -# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - -# Used to initialize the internal time logic. -# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. -# You would only need this if you are concerned about accurate -# time conversions in the past or in the distant future. -# CONFIG_JULIAN_TIME - Enables Julian time conversions. You -# would only need this if you are concerned about accurate -# time conversion in the distand past. You must also define -# CONFIG_GREGORIAN_TIME in order to use Julian time. -# CONFIG_DEV_CONSOLE - Set if architecture-specific logic -# provides /dev/console. Enables stdout, stderr, stdin. -# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console -# driver (minimul support) -# CONFIG_MUTEX_TYPES: Set to enable support for recursive and -# errorcheck mutexes. Enables pthread_mutexattr_settype(). -# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority -# inheritance on mutexes and semaphores. -# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority -# inheritance is enabled. It defines the maximum number of -# different threads (minus one) that can take counts on a -# semaphore with priority inheritance support. This may be -# set to zero if priority inheritance is disabled OR if you -# are only using semaphores as mutexes (only one holder) OR -# if no more than two threads participate using a counting -# semaphore. -# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, -# then this setting is the maximum number of higher priority -# threads (minus 1) than can be waiting for another thread -# to release a count on a semaphore. This value may be set -# to zero if no more than one thread is expected to wait for -# a semaphore. -# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors -# by task_create() when a new task is started. If set, all -# files/drivers will appear to be closed in the new task. -# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first -# three file descriptors (stdin, stdout, stderr) by task_create() -# when a new task is started. If set, all files/drivers will -# appear to be closed in the new task except for stdin, stdout, -# and stderr. -# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket -# desciptors by task_create() when a new task is started. If -# set, all sockets will appear to be closed in the new task. -# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. -# This format will support execution of NuttX binaries located -# in a ROMFS filesystem (see examples/nxflat). -# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to -# handle delayed processing from interrupt handlers. This feature -# is required for some drivers but, if there are not complaints, -# can be safely disabled. The worker thread also performs -# garbage collection -- completing any delayed memory deallocations -# from interrupt handlers. If the worker thread is disabled, -# then that clean will be performed by the IDLE thread instead -# (which runs at the lowest of priority and may not be appropriate -# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE -# is enabled, then the following options can also be used: -# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker -# thread. Default: 50 -# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for -# work in units of microseconds. Default: 50*1000 (50 MS). -# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker -# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. -# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up -# the worker thread. Default: 4 -# -#CONFIG_APPS_DIR= -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_DEBUG_NET=n -CONFIG_DEBUG_USB=n -CONFIG_MM_REGIONS=2 -CONFIG_ARCH_LOWPUTC=y -CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n -CONFIG_TASK_NAME_SIZE=0 -CONFIG_START_YEAR=2011 -CONFIG_START_MONTH=3 -CONFIG_START_DAY=8 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n -CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=n -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n -CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=y -CONFIG_SCHED_WORKPRIORITY=50 -CONFIG_SCHED_WORKPERIOD=(50*1000) -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=4 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=n -CONFIG_DISABLE_ENVIRON=n -CONFIG_DISABLE_POLL=n - -# -# Misc libc settings -# -# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a -# little smaller if we do not support fieldwidthes -# -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n - -# -# Sizes of configurable things (0 disables) -# -# CONFIG_MAX_TASKS - The maximum number of simultaneously -# active tasks. This value must be a power of two. -# CONFIG_MAX_TASK_ARGS - This controls the maximum number of -# of parameters that a task may receive (i.e., maxmum value -# of 'argc') -# CONFIG_NPTHREAD_KEYS - The number of items of thread- -# specific data that can be retained -# CONFIG_NFILE_DESCRIPTORS - The maximum number of file -# descriptors (one for each open) -# CONFIG_NFILE_STREAMS - The maximum number of streams that -# can be fopen'ed -# CONFIG_NAME_MAX - The maximum size of a file name. -# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate -# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_NUNGET_CHARS - Number of characters that can be -# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) -# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message -# structures. The system manages a pool of preallocated -# message structures to minimize dynamic allocations -# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with -# a fixed payload size given by this settin (does not include -# other message structure overhead. -# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that -# can be passed to a watchdog handler -# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog -# structures. The system manages a pool of preallocated -# watchdog structures to minimize dynamic allocations -# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX -# timer structures. The system manages a pool of preallocated -# timer structures to minimize dynamic allocations. Set to -# zero for all dynamic allocations. -# -CONFIG_MAX_TASKS=16 -CONFIG_MAX_TASK_ARGS=4 -CONFIG_NPTHREAD_KEYS=4 -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=256 -CONFIG_NUNGET_CHARS=2 -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=4 -CONFIG_PREALLOC_TIMERS=4 - -# -# Filesystem configuration -# -# CONFIG_FS_FAT - Enable FAT filesystem support -# CONFIG_FAT_SECTORSIZE - Max supported sector size -# CONFIG_FS_ROMFS - Enable ROMFS filesystem support -# -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n - -# -# SPI-based MMC/SD driver -# -# CONFIG_MMCSD_NSLOTS -# Number of MMC/SD slots supported by the driver -# CONFIG_MMCSD_READONLY -# Provide read-only access (default is read/write) -# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. -# Default is 20MHz. -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# Block driver buffering -# -# CONFIG_FS_READAHEAD -# Enable read-ahead buffering -# CONFIG_FS_WRITEBUFFER -# Enable write buffering -# -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n - -# -# SDIO-based MMC/SD driver -# -# CONFIG_SDIO_DMA -# SDIO driver supports DMA -# CONFIG_MMCSD_MMCSUPPORT -# Enable support for MMC cards -# CONFIG_MMCSD_HAVECARDDETECT -# SDIO driver card detection is 100% accurate -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# CONFIG_NET - Enable or disable all network features -# CONFIG_NET_NOINTS - uIP not called from interrupt level. -# CONFIG_NET_MULTIBUFFER - Use multiple input/output buffers (probably no) -# CONFIG_NET_IPv6 - Build in support for IPv6 -# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. -# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options -# CONFIG_NET_BUFSIZE - uIP buffer size -# CONFIG_NET_TCP - TCP support on or off -# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) -# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers -# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) -# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until -# accept() is called. The size of the backlog is selected when listen() is called. -# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) -# CONFIG_NET_UDP - UDP support on or off -# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off -# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections -# CONFIG_NET_ICMP - ICMP ping response support on or off -# CONFIG_NET_ICMP_PING - ICMP ping request support on or off -# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address -# CONFIG_NET_STATISTICS - uIP statistics on or off -# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window -# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table -# CONFIG_NET_BROADCAST - Broadcast support -# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates -# CONFIG_NET_WLAN - Enable or disable WLAN network interface -# -CONFIG_NET=y -CONFIG_NET_NOINTS=y -CONFIG_NET_MULTIBUFFER=y -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=2 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=y -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=y -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n -#CONFIG_NET_FWCACHE_SIZE=2 -CONFIG_NET_WLAN=y - -# -# UIP Network Utilities -# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP -# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# USB Device Configuration -# -# CONFIG_USBDEV -# Enables USB device support -# CONFIG_USBDEV_ISOCHRONOUS -# Build in extra support for isochronous endpoints -# CONFIG_USBDEV_DUALSPEED -# Hardware handles high and full speed operation (USB 2.0) -# CONFIG_USBDEV_SELFPOWERED -# Will cause USB features to indicate that the device is -# self-powered -# CONFIG_USBDEV_MAXPOWER -# Maximum power consumption in mA -# CONFIG_USBDEV_TRACE -# Enables USB tracing for debug -# CONFIG_USBDEV_TRACE_NRECORDS -# Number of trace entries to remember -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# USB Host Configuration -# -# CONFIG_USBHOST -# Enables USB host support -# CONFIG_USBHOST_NPREALLOC -# Number of pre-allocated class instances -# CONFIG_USBHOST_BULK_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling bulk endpoint support -# CONFIG_USBHOST_INT_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling interrupt endpoint support -# CONFIG_USBHOST_ISOC_DISABLE -# On some architectures, selecting this setting will reduce driver size -# by disabling isochronous endpoint support -# -CONFIG_USBHOST=y -CONFIG_USBHOST_NPREALLOC=0 -CONFIG_USBHOST_BULK_DISABLE=n -CONFIG_USBHOST_INT_DISABLE=y -CONFIG_USBHOST_ISOC_DISABLE=y - -# -# LPC17xx USB Device Configuration -# -# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT -# Handle USB Start-Of-Frame events. -# Enable reading SOF from interrupt handler vs. simply reading on demand. -# Probably a bad idea... Unless there is some issue with sampling the SOF -# from hardware asynchronously. -# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT -# Enable high priority interrupts. I have no idea why you might want to -# do that -# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS -# Number of DMA descriptors to allocate in SRAM. -# CONFIG_LPC17_USBDEV_DMA -# Enable lpc17xx-specific DMA support -# -CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n -CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n -CONFIG_LPC17_USBDEV_DMA=n -CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0 -CONFIG_LPC17_USBDEV_DMAINTMASK=0 - -# -# LPC17xx USB Host Configuration -# -# OHCI RAM layout: -# CONFIG_USBHOST_OHCIRAM_SIZE -# Total size of OHCI RAM (in AHB SRAM Bank 1) -# CONFIG_USBHOST_NEDS -# Number of endpoint descriptors -# CONFIG_USBHOST_NTDS -# Number of transfer descriptors -# CONFIG_USBHOST_TDBUFFERS -# Number of transfer descriptor buffers -# CONFIG_USBHOST_TDBUFSIZE -# Size of one transfer descriptor buffer -# CONFIG_USBHOST_IOBUFSIZE -# Size of one end-user I/O buffer -# -CONFIG_USBHOST_OHCIRAM_SIZE=2048 -CONFIG_USBHOST_NEDS=3 -CONFIG_USBHOST_NTDS=2 -CONFIG_USBHOST_TDBUFFERS=4 -CONFIG_USBHOST_TDBUFSIZE=128 -CONFIG_USBHOST_IOBUFSIZE=448 - -# -# USB Serial Device Configuration -# -# CONFIG_USBSER -# Enable compilation of the USB serial driver -# CONFIG_USBSER_EPINTIN -# The logical 7-bit address of a hardware endpoint that supports -# interrupt IN operation -# CONFIG_USBSER_EPBULKOUT -# The logical 7-bit address of a hardware endpoint that supports -# bulk OUT operation -# CONFIG_USBSER_EPBULKIN -# The logical 7-bit address of a hardware endpoint that supports -# bulk IN operation -# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE -# Size of the serial receive/transmit buffers -# -CONFIG_USBSER=n -CONFIG_USBSER_EPINTIN=1 -CONFIG_USBSER_EPBULKOUT=2 -CONFIG_USBSER_EPBULKIN=5 -CONFIG_USBSER_NWRREQS=4 -CONFIG_USBSER_NRDREQS=4 -CONFIG_USBSER_VENDORID=0x067b -CONFIG_USBSER_PRODUCTID=0x2303 -CONFIG_USBSER_VENDORSTR="Nuttx" -CONFIG_USBSER_PRODUCTSTR="USBdev Serial" -CONFIG_USBSER_RXBUFSIZE=512 -CONFIG_USBSER_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -# CONFIG_USBSTRG -# Enable compilation of the USB storage driver -# CONFIG_USBSTRG_EP0MAXPACKET -# Max packet size for endpoint 0 -# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN -# The logical 7-bit address of a hardware endpoints that support -# bulk OUT and IN operations -# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS -# The number of write/read requests that can be in flight -# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN -# The size of the buffer in each write/read request. This -# value needs to be at least as large as the endpoint -# maxpacket and ideally as large as a block device sector. -# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR -# The vendor ID code/string -# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR -# The product ID code/string -# CONFIG_USBSTRG_REMOVABLE -# Select if the media is removable -# -CONFIG_USBSTRG=n -CONFIG_USBSTRG_EP0MAXPACKET=64 -CONFIG_USBSTRG_EPBULKOUT=2 -CONFIG_USBSTRG_EPBULKIN=5 -CONFIG_USBSTRG_NRDREQS=2 -CONFIG_USBSTRG_NWRREQS=2 -CONFIG_USBSTRG_BULKINREQLEN=256 -CONFIG_USBSTRG_BULKOUTREQLEN=256 -CONFIG_USBSTRG_VENDORID=0x584e -CONFIG_USBSTRG_VENDORSTR="NuttX" -CONFIG_USBSTRG_PRODUCTID=0x5342 -CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage" -CONFIG_USBSTRG_VERSIONNO=0x0399 -CONFIG_USBSTRG_REMOVABLE=y - -# -# Settings for examples/uip -# -CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_UIP_DHCPC=n - -# -# Settings for examples/nettest -# CONFIG_EXAMPLE_NETTEST_SERVER - The target board can act -# as either the client side or server side of the test -# CONFIG_EXAMPLE_NETTEST_PERFORMANCE - If set, then the -# client side simply receives messages forever, allowing -# measurement of throughput -# CONFIG_EXAMPLE_NETTEST_NOMAC - Set if the hardware has -# no MAC address; one will be assigned -# CONFIG_EXAMPLE_NETTEST_IPADDR - Target board IP address -# CONFIG_EXAMPLE_NETTEST_DRIPADDR - Default router address -# CONFIG_EXAMPLE_NETTEST_NETMASK - Network mask -# CONFIG_EXAMPLE_NETTEST_CLIENTIP - IP address of the -# client side of the test (may be target or host) -# -CONFIG_EXAMPLE_NETTEST_SERVER=n -CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLE_NETTEST_NOMAC=n -CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) - -# -# Settings for apps/examples/wlan -# -CONFIG_EXAMPLE_WLAN_DHCPC=n -CONFIG_EXAMPLE_WLAN_NOMAC=n -CONFIG_EXAMPLE_WLAN_IPADDR=(192<<24|168<<16|0<<8|201) -CONFIG_EXAMPLE_WLAN_DRIPADDR=(192<<24|168<<16|0<<8|1) -CONFIG_EXAMPLE_WLAN_NETMASK=(255<<24|255<<16|255<<8|0) - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer -# CONFIG_NSH_STRERROR - Use strerror(errno) -# CONFIG_NSH_LINELEN - Maximum length of one command line -# CONFIG_NSH_STACKSIZE - Stack size to use for new threads. -# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi -# CONFIG_NSH_DISABLESCRIPT - Disable scripting support -# CONFIG_NSH_DISABLEBG - Disable background commands -# CONFIG_NSH_ROMFSETC - Use startup script in /etc -# CONFIG_NSH_CONSOLE - Use serial console front end -# CONFIG_NSH_TELNET - Use telnetd console front end -# CONFIG_NSH_ARCHINIT - Platform provides architecture -# specific initialization (nsh_archinitialize()). -# -# If CONFIG_NSH_TELNET is selected: -# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size -# CONFIG_NSH_DHCPC - Obtain address using DHCP -# CONFIG_NSH_IPADDR - Provides static IP address -# CONFIG_NSH_DRIPADDR - Provides static router IP address -# CONFIG_NSH_NETMASK - Provides static network mask -# CONFIG_NSH_NOMAC - Use a bogus MAC address -# -# If CONFIG_NSH_ROMFSETC is selected: -# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint -# CONFIG_NSH_INITSCRIPT - Relative path to init script -# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor -# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size -# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor -# CONFIG_NSH_FATSECTSIZE - FAT FS sector size -# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors -# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_STACKSIZE=2048 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=y -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) -CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) -CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT=/tmp - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# Settings for examples/usbserial -# -# CONFIG_EXAMPLES_USBSERIAL_INONLY -# Only verify IN (device-to-host) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_OUTONLY -# Only verify OUT (host-to-device) data transfers. Default: both -# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL -# Send only small, single packet messages. Default: Send large and small. -# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG -# Send only large, multi-packet messages. Default: Send large and small. -# -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - -# -# Settings for internet_radio by Decio -# -CONFIG_INTERNETRADIO_ARCHINIT=n - -# -# Stack and heap information -# -# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP -# operation from FLASH but must copy initialized .data sections to RAM. -# (should also be =n for the LPC17xx which always runs from flash) -# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH -# but copy themselves entirely into RAM for better performance. -# CONFIG_CUSTOM_STACK - The up_ implementation will handle -# all stack operations outside of the nuttx model. -# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) -# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. -# This is the thread that (1) performs the inital boot of the system up -# to the point where user_start() is spawned, and (2) there after is the -# IDLE thread that executes only when there is no other thread ready to -# run. -# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate -# for the main user thread that begins at the user_start() entry point. -# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size -# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size -# CONFIG_HEAP_BASE - The beginning of the heap -# CONFIG_HEAP_SIZE - The size of the heap -# -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n -CONFIG_STACK_POINTER= -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -CONFIG_HEAP_BASE= -CONFIG_HEAP_SIZE= - -# -# USB WLAN device identification -# -CONFIG_USB_WLAN_VID=0x0bda -CONFIG_USB_WLAN_PID=0x8189 diff --git a/nuttx/configs/detron/wlan/ld.script b/nuttx/configs/detron/wlan/ld.script deleted file mode 100755 index ba374449d2..0000000000 --- a/nuttx/configs/detron/wlan/ld.script +++ /dev/null @@ -1,110 +0,0 @@ -/**************************************************************************** - * configs/detron/wlan/ld.script - * - * Copyright (C) 2011 Gregory Nutt. All rights reserved. - * Authors: Gregory Nutt - * Rafael Noronha - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and - * 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address - * 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses - * 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit - * into the 32Kb CPU SRAM address range. - */ - -MEMORY -{ - flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K - sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K -} - -OUTPUT_ARCH(arm) -ENTRY(_stext) -SECTIONS -{ - .text : { - _stext = ABSOLUTE(.); - *(.vectors) - *(.text .text.*) - *(.fixup) - *(.gnu.warning) - *(.rodata .rodata.*) - *(.gnu.linkonce.t.*) - *(.glue_7) - *(.glue_7t) - *(.got) - *(.gcc_except_table) - *(.gnu.linkonce.r.*) - _etext = ABSOLUTE(.); - } > flash - - _eronly = ABSOLUTE(.); /* See below */ - - .data : { - _sdata = ABSOLUTE(.); - *(.data .data.*) - *(.gnu.linkonce.d.*) - CONSTRUCTORS - _edata = ABSOLUTE(.); - } > sram AT > flash - - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .ARM.exidx : { - __exidx_start = ABSOLUTE(.); - *(.ARM.exidx*) - __exidx_end = ABSOLUTE(.); - } >sram - - .bss : { /* BSS */ - _sbss = ABSOLUTE(.); - *(.bss .bss.*) - *(.gnu.linkonce.b.*) - *(COMMON) - _ebss = ABSOLUTE(.); - } > sram - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_info 0 : { *(.debug_info) } - .debug_line 0 : { *(.debug_line) } - .debug_pubnames 0 : { *(.debug_pubnames) } - .debug_aranges 0 : { *(.debug_aranges) } -} diff --git a/nuttx/configs/detron/wlan/setenv.sh b/nuttx/configs/detron/wlan/setenv.sh deleted file mode 100755 index 7dfa40542a..0000000000 --- a/nuttx/configs/detron/wlan/setenv.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -# configs/detron/wlan/setenv.sh -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Authors: Gregory Nutt -# Rafael Noronha -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$(basename $0)" = "setenv.sh" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi - -WD=`pwd` -export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" -export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}"