@@ -64,6 +64,8 @@
| | | `- README.txt
| | |- ea3131/
| | | `- README.txt
+ | | |- ea3152/
+ | | | `- README.txt
| | |- eagle100/
| | | |- include/README.txt
| | | |- src/README.txt
@@ -90,7 +92,7 @@
| | | |- include/README.txt
| | | |- src/README.txt
| | | `- README.txt
- | | |- lm3s8962
+ | | |- lm3s8962-ek/
| | | |- include/README.txt
| | | |- src/README.txt
| | | `- README.txt
@@ -140,7 +142,8 @@
| | |- qemu-i486/
| | | |- include/README.txt
| | | |- src/README.txt
- | | | `- README.txtREADME.txt
+ | | |- rgmp/
| | | |- include/README.txt
| | | |- src/README.txt
| | | `- README.txt>
@@ -163,6 +166,8 @@
| | | `- README.txt
| | |- sure-pic32mx/
| | | `- README.txt
+ | | |- teensy/
+ | | | `- README.txt
| | |- twr-k60n512/
| | | `- README.txt
| | |- us7032evb1/
@@ -193,6 +198,8 @@
| | | `- README.txt
| | `- README.txt
| |- drivers/
+ | | |- mmap/
+ | | | `- README.txt
| | `- README.txt
| |- fs/
| | |- mmap/
diff --git a/nuttx/README.txt b/nuttx/README.txt
index 63f78cd213..b820590e06 100755
--- a/nuttx/README.txt
+++ b/nuttx/README.txt
@@ -351,6 +351,8 @@ nuttx
| | `- README.txt
| |- ea3131/
| | `- README.txt
+ | |- ea3152/
+ | | `- README.txt
| |- eagle100/
| | |- include/README.txt
| | |- src/README.txt
@@ -366,6 +368,10 @@ nuttx
| | |- ostest/README.txt
| | |- poll/README.txt
| | `- README.txt
+ | |- hymini-stm32v/
+ | | |- include/README.txt
+ | | |- src/README.txt
+ | | `- README.txt
| |- kwikstik-k40/
| | `- README.txt
| |- lm3s6965-ek/
@@ -442,8 +448,12 @@ nuttx
| | |- RIDE/README.txt
| | |- src/README.txt
| | `- README.txt
+ | |- stm3240g-eval/
+ | | `- README.txt
| |- sure-pic32mx/
| | `- README.txt
+ | |- teensy/
+ | | `- README.txt
| |- twr-k60n512/
| | `- README.txt
| |- us7032evb1/
@@ -474,6 +484,8 @@ nuttx
| | `- README.txt
| `- README.txt
|- drivers/
+ | |- lcd/
+ | | `- README.txt
| `- README.txt
|- fs/
| |- mmap/
diff --git a/nuttx/configs/pic32-starterkit/README.txt b/nuttx/configs/pic32-starterkit/README.txt
index 94dcc84030..5da4a92df0 100644
--- a/nuttx/configs/pic32-starterkit/README.txt
+++ b/nuttx/configs/pic32-starterkit/README.txt
@@ -51,6 +51,7 @@ Contents
MEB Connector
PICtail
Toolchains
+ Powering the Board
Loading NuttX with PICkit2
Serial Console
PIC32MX Configuration Options
@@ -419,6 +420,17 @@ Toolchains
If you have problems with the dependency build (for example, if you are not
building on C:), then you may need to modify tools/mkdeps.sh
+Powering the Board
+==================
+
+ "Power can be supplied to the Multimedia Expansion Board through the DC
+ connector located on the Multimedia Expansion Board... By connecting
+ 9-14V power supply to the DC connector, the Multimedia Expansion Board
+ and starter kit will receive the proper voltages. The user can also
+ supply power via the starter kit. However, if the application uses
+ multiple features of the Multimedia Expansion Board, it is recommended
+ to use 9-14V power supply."
+
Loading NuttX with PICkit2
==========================
diff --git a/nuttx/configs/pic32-starterkit/ostest/defconfig b/nuttx/configs/pic32-starterkit/ostest/defconfig
index 2aa62e73c6..987b6d8bcd 100644
--- a/nuttx/configs/pic32-starterkit/ostest/defconfig
+++ b/nuttx/configs/pic32-starterkit/ostest/defconfig
@@ -49,7 +49,9 @@
# CONFIG_ARCH_BOARD_name - for use in C code
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
# NOTE: The PIC32MX is always little endian.
-# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
+# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+# the delay actually is 100 seconds.
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
# CONFIG_DRAM_START - The start address of DRAM (physical)
# CONFIG_DRAM_END - Last address+1 of installed RAM
@@ -65,9 +67,6 @@
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
# cause a 100 second delay during boot-up. This 100 second delay
# serves no purpose other than it allows you to calibrate
-# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
-# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
-# the delay actually is 100 seconds.
# CONFIG_ARCH_DMA - Support DMA initialization
#
CONFIG_ARCH=mips
@@ -177,7 +176,7 @@ CONFIG_PIC32MX_IOPORTG=y
# can be enabled later by software).
#
CONFIG_PIC32MX_DEBUGGER=2
-CONFIG_PIC32MX_ICESEL=0
+CONFIG_PIC32MX_ICESEL=1
#
# PIC32MX specific serial device driver settings
diff --git a/nuttx/drivers/lcd/README.txt b/nuttx/drivers/lcd/README.txt
new file mode 100644
index 0000000000..6dad158b26
--- /dev/null
+++ b/nuttx/drivers/lcd/README.txt
@@ -0,0 +1,135 @@
+Contents
+========
+
+This is the README.txt file for the drivers/lcd/ directory.
+
+ - LCD Header files
+ include/nuttx/lcd/lcd.h
+ struct lcd_dev_s
+ - Binding LCD Drivers
+ - Examples: /drivers/lcd/
+ - Examples: configs/
+ - graphics/
+
+LCD Header files
+================
+
+ include/nuttx/lcd/lcd.h
+
+ Structures and APIs needed to work with LCD drivers are provided in
+ this header file. This header file also depends on some of the same
+ definitions used for the frame buffer driver as privided in
+ include/nuttx/fb.h.
+
+ struct lcd_dev_s
+
+ Each LCD device driver must implement an instance of struct lcd_dev_s.
+ That structure defines a call table with the following methods:
+
+ - Get information about the LCD video controller configuration and the
+ configuration of each LCD color plane.
+
+ int (*getvideoinfo)(FAR struct lcd_dev_s *dev,
+ FAR struct fb_videoinfo_s *vinfo);
+ int (*getplaneinfo)(FAR struct lcd_dev_s *dev, unsigned int planeno,
+ FAR struct lcd_planeinfo_s *pinfo);
+
+ - The following are provided only if the video hardware supports RGB
+ color mapping:
+
+ int (*getcmap)(FAR struct lcd_dev_s *dev,
+ FAR struct fb_cmap_s *cmap);
+ int (*putcmap)(FAR struct lcd_dev_s *dev,
+ FAR const struct fb_cmap_s *cmap);
+
+ - The following are provided only if the video hardware supports a
+ hardware cursor:
+
+ int (*getcursor)(FAR struct lcd_dev_s *dev,
+ FAR struct fb_cursorattrib_s *attrib);
+ int (*setcursor)(FAR struct lcd_dev_s *dev,
+ FAR struct fb_setcursor_s *settings);
+
+ - Get the LCD panel power status (0: full off - CONFIG_LCD_MAXPOWER:
+ full on). On backlit LCDs, this setting may correspond to the
+ backlight setting.
+
+ int (*getpower)(struct lcd_dev_s *dev);
+
+ - Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER:
+ full on). On backlit LCDs, this setting may correspond to the
+ backlight setting.
+
+ int (*setpower)(struct lcd_dev_s *dev, int power);
+
+ - Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST) */
+
+ int (*getcontrast)(struct lcd_dev_s *dev);
+
+ - Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST)
+
+ int (*setcontrast)(struct lcd_dev_s *dev, unsigned int contrast);
+
+Binding LCD Drivers
+===================
+
+ LCD drivers are not normally directly accessed by user code, but are
+ usually bound to another, higher level device driver. In general, the
+ binding sequence is:
+
+ 1. Get an instance of struct lcd_dev_s from the hardware-specific LCD
+ device driver, and
+ 2. Provide that instance to the initialization method of the higher
+ level device driver.
+
+Examples: /drivers/lcd/
+=======================
+
+Re-usable LCD drivers reside in the drivers/lcd directory:
+
+ nokia6100.c. Supports the Nokia 6100 display with either the Philips
+ PCF883 or the Epson S1D15G10 display controller. This LCD is used
+ with the Olimex LPC1766-STK (but has not been fully integrated).
+
+ p14201.c. Driver for RiT P14201 series display with SD1329 IC
+ controller. This OLED is used with older versions of the
+ TI/Luminary LM3S8962 Evaluation Kit.
+
+ ug-9664hswag01.c. OLED Display Module, UG-9664HSWAG01", Univision
+ Technology Inc. Used with the LPC Xpresso and Embedded Artists
+ base board.
+
+Examples: configs/
+==================
+
+There are additional LCD drivers in the configs//src directory
+that support additional LCDs. LCD drivers in the configuration directory
+if they support some differ LCD interface (such as a parallel interface)
+that makes then less re-usable:
+
+configs/sam3u-ek/src/up_lcd.c.
+
+ configs/hymini-stm32v/src/ssd1289.c.
+
+ SSD1289
+
+ configs/sam3u-ek/src/up_lcd.c
+
+ The SAM3U-EK developement board features a TFT/Transmissive color
+ LCD module with touch-screen, FTM280C12D, with integrated driver IC
+ HX8346.
+
+ configs/stm3210e-eval/src/up_lcd.c
+
+ This driver supports the following LCDs:
+
+ 1. Ampire AM-240320LTNQW00H
+ 2. Orise Tech SPFD5408B
+ 3. RenesasSP R61580
+
+ configs/skp16c26/src/up_lcd.c. Untest alphanumeric LCD driver.
+
+graphics/
+=========
+
+ See also the usage of the LCD driver in the graphics/ directory.