From 0a59d8a36d8e8522788d5c4ba843a3acd945ddad Mon Sep 17 00:00:00 2001
From: Daniel Agar <daniel@agar.ca>
Date: Sat, 7 Dec 2019 20:27:41 -0500
Subject: [PATCH] Jenkins hardware leave RGB LED defaults

---
 .ci/Jenkinsfile-hardware | 22 ----------------------
 1 file changed, 22 deletions(-)

diff --git a/.ci/Jenkinsfile-hardware b/.ci/Jenkinsfile-hardware
index 93d48d8944..b60678c1aa 100644
--- a/.ci/Jenkinsfile-hardware
+++ b/.ci/Jenkinsfile-hardware
@@ -51,8 +51,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                   }
                 }
                 stage("status") {
@@ -117,8 +115,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"'                        // reboot to apply
                   }
@@ -191,8 +187,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"'                        // reboot to apply
                   }
@@ -265,8 +259,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"'                        // reboot to apply
                   }
@@ -339,8 +331,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"'                        // reboot to apply
                   }
@@ -413,8 +403,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set SYS_AUTOSTART 4001"' // generic vtol standardulticopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "reboot"'                        // reboot to apply
                   }
@@ -487,8 +475,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"'                        // reboot to apply
@@ -562,8 +548,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"' // generic vtol standard
                   }
                 }
@@ -648,8 +632,6 @@ pipeline {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"'                        // reboot to apply
                   }
@@ -785,8 +767,6 @@ void cleanupFTDI() {
 
   // reset safe defaults
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
 
   // reboot
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-FTDI_*` --cmd "reboot"'
@@ -808,8 +788,6 @@ void cleanupSEGGER() {
 
   // reset safe defaults
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set LED_RGB_MAXBRT 0"'    // disable rgbled
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "param set LED_RGB1_MAXBRT 0"'   // disable rgbled_ncp5623c
 
   // reboot
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-SEGGER_*` --cmd "reboot"'