From c27f799465a674de5c393f2de1e64108a93829ef Mon Sep 17 00:00:00 2001
From: Emran Billah <emran.billah@spirirobotics.com>
Date: Wed, 28 Aug 2024 16:45:47 -0300
Subject: [PATCH] Updating readme

---
 README.md | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/README.md b/README.md
index 4a5bdc4..a672f31 100644
--- a/README.md
+++ b/README.md
@@ -62,15 +62,16 @@ git clone https://git.spirirobotics.com/Spiri/services-xbee_net
 cd services-xbee_net
 ```
 
-#### 2. Modify `.env-...` File based on running single or multiple xbnets
+#### 2. Run a single xbnet node using the following cmd:
 
-The `.env` file contains the configuration parameters for the XBee network. You may need to update these parameters according to your specific setup. 
-- For a single xbnet setup, modify params in the `.env-run-single`
-- For multi xbnet setup, modify params in the `.env-run-multiple`
-#### (Note: Multi node xbnet setup is currently under progress)
+```bash
+- sh ./run-single.sh --subnet=7.7.7 --serial-speed=230400 --port=/dev/ttyUSB0 --interface-type=router  
+- sh ./run-single.sh --subnet=7.7.7 --serial-speed=230400 --port=/dev/ttyUSB0 --interface-type=gateway  
+```
 
 ---
-##### a. Sample `.env-run-single` config:
+
+##### Config `.env`:
 ```bash
 # Configuration for xbnet0
 XBEE_PORT=/dev/ttyUSB0