diff --git a/Dockerfile b/Dockerfile
index a84526d..fc2fa49 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,7 +1,7 @@
 # Use an official Rust image as the base
 FROM rust:latest
 
-# Install necessary packages
+# Install necessary packages including supervisord
 RUN apt-get update && apt-get install -y \
     libudev-dev \
     iproute2 \
@@ -19,22 +19,22 @@ RUN git clone https://github.com/jgoerzen/xbnet.git /usr/src/xbnet
 WORKDIR /usr/src/xbnet
 RUN cargo build --release
 
-# Copy the built binary to /usr/local/bin (makes it accessible from anywhere in the OS)
+# Copy the built binary to /usr/local/bin
 RUN cp target/release/xbnet /usr/local/bin/xbnet
 
 # Copy the entrypoint script
-COPY entrypoint.sh /entrypoint.sh
+COPY ./scripts/entrypoint.sh /entrypoint.sh
 RUN chmod +x /entrypoint.sh
 
 # Copy the supervisor config file
 COPY supervisord.conf /etc/supervisor/conf.d/supervisord.conf
 
-# Copy the health check script from local ./scripts/ to container root /
+# Copy the health check script
 COPY ./scripts/health_check.sh /health_check.sh
 RUN chmod +x /health_check.sh
 
-# Add the health check
-HEALTHCHECK CMD /health_check.sh || exit 1
-
 # Start supervisord as the main command
 CMD ["/usr/bin/supervisord", "-c", "/etc/supervisor/conf.d/supervisord.conf"]
+
+# Add healthcheck
+HEALTHCHECK CMD /health_check.sh || exit 1
diff --git a/README.md b/README.md
index 90063d3..5d88a40 100644
--- a/README.md
+++ b/README.md
@@ -15,4 +15,95 @@
 - Need to add setup_end_device.sh
 - Need to dockerize service
 - Possibly may need to bridge docker xbnet network with local wifi interface as well
-- Make a submodule of xbnet, or copy over raw files, depending on future decisions
\ No newline at end of file
+- Make a submodule of xbnet, or copy over raw files, depending on future decisions
+
+
+---
+ 
+ 
+
+
+# SERVICES-XBEE-NET
+
+This project contains a Dockerized setup to create and manage an XBee network using the `xbnet` utility. The network interface is bridged with a host Wi-Fi interface, enabling internet access for connected devices.
+
+## File Structure
+```
+services-xbee-net/
+├── scripts/
+│   ├── entrypoint.sh                   # Entrypoint script for Docker container
+│   ├── get_connected_wifi_info.sh      # Script to fetch connected Wi-Fi device information
+│   ├── health_check.sh                 # Script to perform health checks on the container
+│   ├── setup_end_device.sh             # Script to set up the XBee end device
+│   ├── setup_host_device.sh            # Script to set up the XBee host device
+│   ├── test.sh                         # Script to run tests
+├── tests/                              # Directory for testing-related scripts and files
+├── xbnet/                              # The xbnet source code directory
+├── .env                                # Environment variables for the Docker setup
+├── .gitignore                          # Git ignore file
+├── docker-compose-run-multiple.yml     # Docker Compose file to run multiple instances
+├── docker-compose.yml                  # Main Docker Compose file
+├── Dockerfile                          # Dockerfile to build the Docker image
+├── README.md                           # Project documentation
+└── supervisord.conf                    # Supervisor configuration file
+```
+
+## Prerequisites
+
+Ensure Docker and Docker Compose are installed on your machine.
+
+## Getting Started
+
+### 1. Clone the Repository
+
+```bash
+git clone https://github.com/your-username/services-xbee-net.git
+cd services-xbee-net
+```
+
+### 2. Modify the `.env` File
+
+The `.env` file contains the configuration parameters for the XBee network. You may need to update these parameters according to your specific setup. 
+- For a single xbnet setup, modify all the `XBEE0` params only
+- For multi xbnet setup, add similar config chunks like `XBEE1` 
+#### (Note: Multi node xbnet setup is currently under progress)
+
+```bash
+# Configuration for xbnet0
+XBEE0_PORT=/dev/ttyUSB0               # The serial port for the XBee device
+XBEE0_BAUDRATE=230400                 # Baud rate for the XBee device
+XBEE0_NET_SRC_IP=192.168.1.10         # Source IP for the XBee network
+XBEE0_NET_DST_IP=192.168.1.11         # Destination IP for the XBee network
+XBEE0_NET_IFACE_NAME=xbnet0           # Interface name for the XBee network
+
+# Configuration for xbnet1
+XBEE1_PORT=/dev/ttyUSB1
+XBEE1_BAUDRATE=230400
+XBEE1_NET_SRC_IP=192.168.1.11
+XBEE1_NET_DST_IP=192.168.1.10
+XBEE1_NET_IFACE_NAME=xbnet1
+```
+
+### 3. Build and Start the Docker Container
+
+To build the Docker image and start the container, run:
+
+```bash
+docker-compose -f docker-compose.yml up --build
+```
+
+This will build the Docker image and start the container with the XBee network and the required setup.
+
+### 4. Health Check and Container Management
+
+The container includes a health check that pings the XBee network interface to ensure it is functioning properly. The container is configured to restart automatically if the health check fails.
+
+### 5. Troubleshooting
+
+Ensure the XBee devices are connected to the correct serial ports.
+Verify the network interfaces using ip a inside the container.
+The container logs can be viewed using:
+
+```bash
+docker logs xbee_node
+```
\ No newline at end of file
diff --git a/entrypoint.sh b/scripts/entrypoint.sh
similarity index 98%
rename from entrypoint.sh
rename to scripts/entrypoint.sh
index d3d2aaf..8dab520 100644
--- a/entrypoint.sh
+++ b/scripts/entrypoint.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Source the get_connected_wifi_info.sh script
-source ./scripts/get_connected_wifi_info.sh
+source ./get_connected_wifi_info.sh
 
 # Check if the script is running with root privileges
 check_root() {