ROS Implemenation of Buzz
=========================

What is Buzz?
=============

Buzz is a novel programming language for heterogeneous robots swarms.

Buzz advocates a compositional approach, by offering primitives to define swarm behaviors both in a bottom-up and in a top-down fashion.

Bottom-up primitives include robot-wise commands and manipulation of neighborhood data through mapping/reducing/filtering operations.

Top-down primitives allow for the dynamic management of robot teams, and for sharing information globally across the swarm.

Self-organization results from the fact that the Buzz run-time platform is purely distributed.

The language can be extended to add new primitives (thus supporting heterogeneous robot swarms) and can be laid on top of other frameworks, such as ROS.

More information is available at http://the.swarming.buzz/wiki/doku.php?id=start.

Description:
============

Rosbuzz package is the ROS version of Buzz. The package contains a node called “rosbuzz_node”, which implements buzz as a node in ROS. The rosbuzz_node requires certain parameters to run. These parameters are supplied to the node from the ros parameter server. The package also contains a launch file called “rosbuzz.launch”, which initializes the required parameters. The required parameters are the .bzz file location, presence of Remote Controller client, Remote Controller service name, Flight Controller client name and Robot ID.

* The .bzz file location parameter is a string with name “bzzfile_name”, the node compiles and parses the specified .bzz file into .basm, .bo and .bdbg files. The node runs the parsed .bo byte file.

* The presence of remote controller client is a bool parameter with name “rcclient”,  this  specifies  whether there is a remote controller present to issue bypassing commands like takeoff, land, goto location and go home. If there is no remote controller present then this parameter could be set to “false”. If a remote controller exists, this parameter could be set “True” and the service topic offered by the remote controller should be specified to the parameter named “rcservice_name”.

* The flight controller client present in the node is used to send commands to the flight controller. The commands that could be sent are takeoff, land, goto location and go home. The topic name used to communicate with the flight controller should be set to the parameter named “fcclient_name”.

* The last parameter that the rosbuzz_node depends on is the robot ID of type “int”, this parameter could be set to the parameter named “robot_id”. This parameter is by default set to ‘0’, if not specified.  

An example template of parameter setting could be found in the launch file “launch/rosbuzz.launch”. 


Downloading ROS Package
=======================

    $ git clone https://github.com/MISTLab/ROSBuzz.git rosbuzz

Requirements
============

* Buzz : 

You can download the development sources through git:

    $ git clone https://github.com/MISTLab/Buzz.git buzz

* ROS binary distribution (Indigo or higher) with catkin (could be used with older versions of ROS with catkin but not tested)


You need the following package:

* mavros_msgs : 

You can install using apt-get:

    $ sudo apt-get install ros-<distro>-mavros ros-<distro>-mavros-extras

Compilation
===========

To compile the ros package, execute the following:

    $ cd catkin_ws
    $ catkin_make
    $ source devel/setup.bash
    
Run
===
To run the ROSBuzz package using the launch file, execute the following:

    $ roslaunch rosbuzz rosbuzz.launch

Publisher
=========

* Messages from Buzz (BVM):
The package publishes mavros_msgs/Mavlink message with a topic name of "outMavlink". 

Subscribers
-----------

* Current position of the Robot:
The package subscribes' to sensor_msgs/NavSatFix message with a topic name of "current_pos".

* Messages to Buzz (BVM):
The package subscribes' to mavros_msgs/Mavlink message with a topic name of "inMavlink".

* Battery status:
The package subscribes' to mavros_msgs/BatteryStatus message with a topic name of "battery_state".

Service
-------

* Remote Controller command:
The package offers service using mavros_msgs/CommandInt service with name "rc_cmd".

Client
------

* Flight controller client:
This package is a client of mavros_msgs/CommandInt service with name "fc_cmd".