cpython/Doc/libmactcp.tex

165 lines
5.5 KiB
TeX

\section{Built-in module \sectcode{mactcp}}
\bimodindex{mactcp}
\renewcommand{\indexsubitem}{(in module mactcp)}
This module provides an interface to the Macintosh TCP/IP driver
MacTCP. There is an accompanying module \var{macdnr} which provides an
interface to the name-server (allowing you to translate hostnames to
ip-addresses), a module \var{MACTCP} which has symbolic names for
constants constants used by MacTCP and a wrapper module \var{socket}
which mimics the unix socket interface (as far as possible).
A complete description of the MacTCP interface can be found in the
Apple MacTCP API documentation.
\begin{funcdesc}{MTU}{}
Return the Maximum Transmit Unit (the packet size) of the network
interface.
\end{funcdesc}
\begin{funcdesc}{IPAddr}{}
Return the 32-bit integer IP address of the network interface.
\end{funcdesc}
\begin{funcdesc}{NetMask}{}
Return the 32-bit integer network mask of the interface.
\end{funcdesc}
\begin{funcdesc}{TCPCreate}{size}
Create a TCP Stream object. \var{Size} is the size of the receive
buffer, \code{4096} is suggested by various sources.
\end{funcdesc}
\begin{funcdesc}{UDPCreate}{size, port}
Create a UDP stream object. \var{Size} is the size of the receive
buffer (and, hence, the size of the biggest datagram you can receive
on this port). \var{Port} is the UDP port number you want to receive
datagrams on, a value of zero will make MacTCP select a free port.
\end{funcdesc}
\subsection{TCP stream objects}
\renewcommand{\indexsubitem}{(TCP stream method)}
\begin{datadesc}{asr}
When set to a value different than \var{None} this should point to a
function with two integer parameters: an event code and a detail. This
function will be called upon network-generated events such as urgent
data arrival. In addition, it is called with eventcode
\var{MACTCP.PassiveOpenDone} when a \var{PassiveOpen} completes. This
is a python addition to the MacTCP semantics.
It is safe to do further calls from the asr.
\end{datadesc}
\begin{funcdesc}{PassiveOpen}{port}
Wait for an incoming connection on TCP port \var{port} (zero makes the
system pick a free port). The call returns immedeately, and you should
use \var{wait} to wait for completion. You should not issue any method
calls other than
\var{wait}, \var{isdone} or \var{GetSockName} before the call
completes.
\end{funcdesc}
\begin{funcdesc}{wait}{}
Wait for \var{PassiveOpen} to complete.
\end{funcdesc}
\begin{funcdesc}{isdone}{}
Return 1 if a \var{PassiveOpen} is completed.
\end{funcdesc}
\begin{funcdesc}{GetSockName}{}
Return the TCP address of this side of a connection as a 2-tuple
\code{(host, port)}, both integers.
\end{funcdesc}
\begin{funcdesc}{ActiveOpen}{lport\, host\, rport}
Open an outgoing connection to TCP address \code{(host, rport)}. Use
local port \var{lport} (zero makes the system pick a free port). This
call blocks until the connection is established.
\end{funcdesc}
\begin{funcdesc}{Send}{buf\, push\, urgent}
Send data \var{buf} over the connection. \var{Push} and \var{urgent}
are flags as specified by the TCP standard.
\end{funcdesc}
\begin{funcdesc}{Rcv}{timeout}
Receive data. The call returns when \var{timeout} seconds have passed
or when (according to the MacTCP documentation) ``a reasonable amount
of data has been received''. The return value is a 3-tuple
\code{(data, urgent, mark)}. If urgent data is outstanding \var{Rcv}
will always return that before looking at any normal data. The first
call returning urgent data will have the \var{urgent} flag set, the
last will have the \var{mark} flag set.
\end{funcdesc}
\begin{funcdesc}{Close}{}
Tell MacTCP that no more data will be transmitted on this
connection. The call returnes when all data has been acknowledged by
the receiving side.
\end{funcdesc}
\begin{funcdesc}{Abort}{}
Forcibly close both sides of a connection, ignoring outstanding data.
\end{funcdesc}
\begin{funcdesc}{Status}{}
Return a TCP status object for this stream.
\end{funcdesc}
\subsection{TCP status objects}
This object has no methods, only some members holding information on
the connection. A complete description of all fields in this objects
can be found in the Apple documentation. The most interesting ones are:
\renewcommand{\indexsubitem}{(TCP status method)}
\begin{datadesc}{localHost}
\dataline{localPort}
\dataline{remoteHost}
\dataline{remotePort}
The integer IP-addresses and port numbers of both endpoints of the
connection.
\end{datadesc}
\begin{datadesc}{sendWindow}
The current window size.
\end{datadesc}
\begin{datadesc}{amtUnackedData}
The number of bytes sent but not yet acknowledged. \code{sendWindow -
amtUnackedData} is what you can pass to \code{Send} without blocking.
\end{datadesc}
\begin{datadesc}{amtUnreadData}
The number of bytes received but not yet read (what you can \var{Recv}
without blocking).
\end{datadesc}
\subsection{UDP stream objects}
Note that, unlike the name suggests, there is nothing stream-like
about UDP.
\renewcommand{\indexsubitem}{(UDP stream method)}
\begin{datadesc}{asr}
The asynchronous service routine to be called on events such as
datagram arrival without outstanding \var{Read} call. The asr has a
single argument, the event code.
\end{datadesc}
\begin{datadesc}{port}
A read-only member giving the port number of this UDP stream.
\end{datadesc}
\begin{funcdesc}{Read}{timeout}
Read a datagram, waiting at most \var{timeout} seconds (-1 is
indefinite). Returns the data.
\end{funcdesc}
\begin{funcdesc}{Write}{host\, port\, buf}
Send \var{buf} as a datagram to IP-address \var{host}, port
\var{port}.
\end{funcdesc}