import builtins import collections import copyreg import dbm import io import functools import os import math import pickle import pickletools import shutil import struct import sys import threading import types import unittest import weakref from textwrap import dedent from http.cookies import SimpleCookie try: import _testbuffer except ImportError: _testbuffer = None from test import support from test.support import os_helper from test.support import ( TestFailed, run_with_locale, no_tracing, _2G, _4G, bigmemtest ) from test.support.import_helper import forget from test.support.os_helper import TESTFN from test.support import threading_helper from test.support.warnings_helper import save_restore_warnings_filters from pickle import bytes_types # bpo-41003: Save/restore warnings filters to leave them unchanged. # Ignore filters installed by numpy. try: with save_restore_warnings_filters(): import numpy as np except ImportError: np = None requires_32b = unittest.skipUnless(sys.maxsize < 2**32, "test is only meaningful on 32-bit builds") # Tests that try a number of pickle protocols should have a # for proto in protocols: # kind of outer loop. protocols = range(pickle.HIGHEST_PROTOCOL + 1) # Return True if opcode code appears in the pickle, else False. def opcode_in_pickle(code, pickle): for op, dummy, dummy in pickletools.genops(pickle): if op.code == code.decode("latin-1"): return True return False # Return the number of times opcode code appears in pickle. def count_opcode(code, pickle): n = 0 for op, dummy, dummy in pickletools.genops(pickle): if op.code == code.decode("latin-1"): n += 1 return n def identity(x): return x class UnseekableIO(io.BytesIO): def peek(self, *args): raise NotImplementedError def seekable(self): return False def seek(self, *args): raise io.UnsupportedOperation def tell(self): raise io.UnsupportedOperation class MinimalIO(object): """ A file-like object that doesn't support readinto(). """ def __init__(self, *args): self._bio = io.BytesIO(*args) self.getvalue = self._bio.getvalue self.read = self._bio.read self.readline = self._bio.readline self.write = self._bio.write # We can't very well test the extension registry without putting known stuff # in it, but we have to be careful to restore its original state. Code # should do this: # # e = ExtensionSaver(extension_code) # try: # fiddle w/ the extension registry's stuff for extension_code # finally: # e.restore() class ExtensionSaver: # Remember current registration for code (if any), and remove it (if # there is one). def __init__(self, code): self.code = code if code in copyreg._inverted_registry: self.pair = copyreg._inverted_registry[code] copyreg.remove_extension(self.pair[0], self.pair[1], code) else: self.pair = None # Restore previous registration for code. def restore(self): code = self.code curpair = copyreg._inverted_registry.get(code) if curpair is not None: copyreg.remove_extension(curpair[0], curpair[1], code) pair = self.pair if pair is not None: copyreg.add_extension(pair[0], pair[1], code) class C: def __eq__(self, other): return self.__dict__ == other.__dict__ class D(C): def __init__(self, arg): pass class E(C): def __getinitargs__(self): return () # Simple mutable object. class Object: pass # Hashable immutable key object containing unheshable mutable data. class K: def __init__(self, value): self.value = value def __reduce__(self): # Shouldn't support the recursion itself return K, (self.value,) import __main__ __main__.C = C C.__module__ = "__main__" __main__.D = D D.__module__ = "__main__" __main__.E = E E.__module__ = "__main__" class myint(int): def __init__(self, x): self.str = str(x) class initarg(C): def __init__(self, a, b): self.a = a self.b = b def __getinitargs__(self): return self.a, self.b class metaclass(type): pass class use_metaclass(object, metaclass=metaclass): pass class pickling_metaclass(type): def __eq__(self, other): return (type(self) == type(other) and self.reduce_args == other.reduce_args) def __reduce__(self): return (create_dynamic_class, self.reduce_args) def create_dynamic_class(name, bases): result = pickling_metaclass(name, bases, dict()) result.reduce_args = (name, bases) return result class ZeroCopyBytes(bytes): readonly = True c_contiguous = True f_contiguous = True zero_copy_reconstruct = True def __reduce_ex__(self, protocol): if protocol >= 5: return type(self)._reconstruct, (pickle.PickleBuffer(self),), None else: return type(self)._reconstruct, (bytes(self),) def __repr__(self): return "{}({!r})".format(self.__class__.__name__, bytes(self)) __str__ = __repr__ @classmethod def _reconstruct(cls, obj): with memoryview(obj) as m: obj = m.obj if type(obj) is cls: # Zero-copy return obj else: return cls(obj) class ZeroCopyBytearray(bytearray): readonly = False c_contiguous = True f_contiguous = True zero_copy_reconstruct = True def __reduce_ex__(self, protocol): if protocol >= 5: return type(self)._reconstruct, (pickle.PickleBuffer(self),), None else: return type(self)._reconstruct, (bytes(self),) def __repr__(self): return "{}({!r})".format(self.__class__.__name__, bytes(self)) __str__ = __repr__ @classmethod def _reconstruct(cls, obj): with memoryview(obj) as m: obj = m.obj if type(obj) is cls: # Zero-copy return obj else: return cls(obj) if _testbuffer is not None: class PicklableNDArray: # A not-really-zero-copy picklable ndarray, as the ndarray() # constructor doesn't allow for it zero_copy_reconstruct = False def __init__(self, *args, **kwargs): self.array = _testbuffer.ndarray(*args, **kwargs) def __getitem__(self, idx): cls = type(self) new = cls.__new__(cls) new.array = self.array[idx] return new @property def readonly(self): return self.array.readonly @property def c_contiguous(self): return self.array.c_contiguous @property def f_contiguous(self): return self.array.f_contiguous def __eq__(self, other): if not isinstance(other, PicklableNDArray): return NotImplemented return (other.array.format == self.array.format and other.array.shape == self.array.shape and other.array.strides == self.array.strides and other.array.readonly == self.array.readonly and other.array.tobytes() == self.array.tobytes()) def __ne__(self, other): if not isinstance(other, PicklableNDArray): return NotImplemented return not (self == other) def __repr__(self): return (f"{type(self)}(shape={self.array.shape}," f"strides={self.array.strides}, " f"bytes={self.array.tobytes()})") def __reduce_ex__(self, protocol): if not self.array.contiguous: raise NotImplementedError("Reconstructing a non-contiguous " "ndarray does not seem possible") ndarray_kwargs = {"shape": self.array.shape, "strides": self.array.strides, "format": self.array.format, "flags": (0 if self.readonly else _testbuffer.ND_WRITABLE)} pb = pickle.PickleBuffer(self.array) if protocol >= 5: return (type(self)._reconstruct, (pb, ndarray_kwargs)) else: # Need to serialize the bytes in physical order with pb.raw() as m: return (type(self)._reconstruct, (m.tobytes(), ndarray_kwargs)) @classmethod def _reconstruct(cls, obj, kwargs): with memoryview(obj) as m: # For some reason, ndarray() wants a list of integers... # XXX This only works if format == 'B' items = list(m.tobytes()) return cls(items, **kwargs) # DATA0 .. DATA4 are the pickles we expect under the various protocols, for # the object returned by create_data(). DATA0 = ( b'(lp0\nL0L\naL1L\naF2.0\n' b'ac__builtin__\ncomple' b'x\np1\n(F3.0\nF0.0\ntp2\n' b'Rp3\naL1L\naL-1L\naL255' b'L\naL-255L\naL-256L\naL' b'65535L\naL-65535L\naL-' b'65536L\naL2147483647L' b'\naL-2147483647L\naL-2' b'147483648L\na(Vabc\np4' b'\ng4\nccopy_reg\n_recon' b'structor\np5\n(c__main' b'__\nC\np6\nc__builtin__' b'\nobject\np7\nNtp8\nRp9\n' b'(dp10\nVfoo\np11\nL1L\ns' b'Vbar\np12\nL2L\nsbg9\ntp' b'13\nag13\naL5L\na.' ) # Disassembly of DATA0 DATA0_DIS = """\ 0: ( MARK 1: l LIST (MARK at 0) 2: p PUT 0 5: L LONG 0 9: a APPEND 10: L LONG 1 14: a APPEND 15: F FLOAT 2.0 20: a APPEND 21: c GLOBAL '__builtin__ complex' 42: p PUT 1 45: ( MARK 46: F FLOAT 3.0 51: F FLOAT 0.0 56: t TUPLE (MARK at 45) 57: p PUT 2 60: R REDUCE 61: p PUT 3 64: a APPEND 65: L LONG 1 69: a APPEND 70: L LONG -1 75: a APPEND 76: L LONG 255 82: a APPEND 83: L LONG -255 90: a APPEND 91: L LONG -256 98: a APPEND 99: L LONG 65535 107: a APPEND 108: L LONG -65535 117: a APPEND 118: L LONG -65536 127: a APPEND 128: L LONG 2147483647 141: a APPEND 142: L LONG -2147483647 156: a APPEND 157: L LONG -2147483648 171: a APPEND 172: ( MARK 173: V UNICODE 'abc' 178: p PUT 4 181: g GET 4 184: c GLOBAL 'copy_reg _reconstructor' 209: p PUT 5 212: ( MARK 213: c GLOBAL '__main__ C' 225: p PUT 6 228: c GLOBAL '__builtin__ object' 248: p PUT 7 251: N NONE 252: t TUPLE (MARK at 212) 253: p PUT 8 256: R REDUCE 257: p PUT 9 260: ( MARK 261: d DICT (MARK at 260) 262: p PUT 10 266: V UNICODE 'foo' 271: p PUT 11 275: L LONG 1 279: s SETITEM 280: V UNICODE 'bar' 285: p PUT 12 289: L LONG 2 293: s SETITEM 294: b BUILD 295: g GET 9 298: t TUPLE (MARK at 172) 299: p PUT 13 303: a APPEND 304: g GET 13 308: a APPEND 309: L LONG 5 313: a APPEND 314: . STOP highest protocol among opcodes = 0 """ DATA1 = ( b']q\x00(K\x00K\x01G@\x00\x00\x00\x00\x00\x00\x00c__' b'builtin__\ncomplex\nq\x01' b'(G@\x08\x00\x00\x00\x00\x00\x00G\x00\x00\x00\x00\x00\x00\x00\x00t' b'q\x02Rq\x03K\x01J\xff\xff\xff\xffK\xffJ\x01\xff\xff\xffJ' b'\x00\xff\xff\xffM\xff\xffJ\x01\x00\xff\xffJ\x00\x00\xff\xffJ\xff\xff' b'\xff\x7fJ\x01\x00\x00\x80J\x00\x00\x00\x80(X\x03\x00\x00\x00ab' b'cq\x04h\x04ccopy_reg\n_reco' b'nstructor\nq\x05(c__main' b'__\nC\nq\x06c__builtin__\n' b'object\nq\x07Ntq\x08Rq\t}q\n(' b'X\x03\x00\x00\x00fooq\x0bK\x01X\x03\x00\x00\x00bar' b'q\x0cK\x02ubh\ttq\rh\rK\x05e.' ) # Disassembly of DATA1 DATA1_DIS = """\ 0: ] EMPTY_LIST 1: q BINPUT 0 3: ( MARK 4: K BININT1 0 6: K BININT1 1 8: G BINFLOAT 2.0 17: c GLOBAL '__builtin__ complex' 38: q BINPUT 1 40: ( MARK 41: G BINFLOAT 3.0 50: G BINFLOAT 0.0 59: t TUPLE (MARK at 40) 60: q BINPUT 2 62: R REDUCE 63: q BINPUT 3 65: K BININT1 1 67: J BININT -1 72: K BININT1 255 74: J BININT -255 79: J BININT -256 84: M BININT2 65535 87: J BININT -65535 92: J BININT -65536 97: J BININT 2147483647 102: J BININT -2147483647 107: J BININT -2147483648 112: ( MARK 113: X BINUNICODE 'abc' 121: q BINPUT 4 123: h BINGET 4 125: c GLOBAL 'copy_reg _reconstructor' 150: q BINPUT 5 152: ( MARK 153: c GLOBAL '__main__ C' 165: q BINPUT 6 167: c GLOBAL '__builtin__ object' 187: q BINPUT 7 189: N NONE 190: t TUPLE (MARK at 152) 191: q BINPUT 8 193: R REDUCE 194: q BINPUT 9 196: } EMPTY_DICT 197: q BINPUT 10 199: ( MARK 200: X BINUNICODE 'foo' 208: q BINPUT 11 210: K BININT1 1 212: X BINUNICODE 'bar' 220: q BINPUT 12 222: K BININT1 2 224: u SETITEMS (MARK at 199) 225: b BUILD 226: h BINGET 9 228: t TUPLE (MARK at 112) 229: q BINPUT 13 231: h BINGET 13 233: K BININT1 5 235: e APPENDS (MARK at 3) 236: . STOP highest protocol among opcodes = 1 """ DATA2 = ( b'\x80\x02]q\x00(K\x00K\x01G@\x00\x00\x00\x00\x00\x00\x00c' b'__builtin__\ncomplex\n' b'q\x01G@\x08\x00\x00\x00\x00\x00\x00G\x00\x00\x00\x00\x00\x00\x00\x00' b'\x86q\x02Rq\x03K\x01J\xff\xff\xff\xffK\xffJ\x01\xff\xff\xff' b'J\x00\xff\xff\xffM\xff\xffJ\x01\x00\xff\xffJ\x00\x00\xff\xffJ\xff' b'\xff\xff\x7fJ\x01\x00\x00\x80J\x00\x00\x00\x80(X\x03\x00\x00\x00a' b'bcq\x04h\x04c__main__\nC\nq\x05' b')\x81q\x06}q\x07(X\x03\x00\x00\x00fooq\x08K\x01' b'X\x03\x00\x00\x00barq\tK\x02ubh\x06tq\nh' b'\nK\x05e.' ) # Disassembly of DATA2 DATA2_DIS = """\ 0: \x80 PROTO 2 2: ] EMPTY_LIST 3: q BINPUT 0 5: ( MARK 6: K BININT1 0 8: K BININT1 1 10: G BINFLOAT 2.0 19: c GLOBAL '__builtin__ complex' 40: q BINPUT 1 42: G BINFLOAT 3.0 51: G BINFLOAT 0.0 60: \x86 TUPLE2 61: q BINPUT 2 63: R REDUCE 64: q BINPUT 3 66: K BININT1 1 68: J BININT -1 73: K BININT1 255 75: J BININT -255 80: J BININT -256 85: M BININT2 65535 88: J BININT -65535 93: J BININT -65536 98: J BININT 2147483647 103: J BININT -2147483647 108: J BININT -2147483648 113: ( MARK 114: X BINUNICODE 'abc' 122: q BINPUT 4 124: h BINGET 4 126: c GLOBAL '__main__ C' 138: q BINPUT 5 140: ) EMPTY_TUPLE 141: \x81 NEWOBJ 142: q BINPUT 6 144: } EMPTY_DICT 145: q BINPUT 7 147: ( MARK 148: X BINUNICODE 'foo' 156: q BINPUT 8 158: K BININT1 1 160: X BINUNICODE 'bar' 168: q BINPUT 9 170: K BININT1 2 172: u SETITEMS (MARK at 147) 173: b BUILD 174: h BINGET 6 176: t TUPLE (MARK at 113) 177: q BINPUT 10 179: h BINGET 10 181: K BININT1 5 183: e APPENDS (MARK at 5) 184: . STOP highest protocol among opcodes = 2 """ DATA3 = ( b'\x80\x03]q\x00(K\x00K\x01G@\x00\x00\x00\x00\x00\x00\x00c' b'builtins\ncomplex\nq\x01G' b'@\x08\x00\x00\x00\x00\x00\x00G\x00\x00\x00\x00\x00\x00\x00\x00\x86q\x02' b'Rq\x03K\x01J\xff\xff\xff\xffK\xffJ\x01\xff\xff\xffJ\x00\xff' b'\xff\xffM\xff\xffJ\x01\x00\xff\xffJ\x00\x00\xff\xffJ\xff\xff\xff\x7f' b'J\x01\x00\x00\x80J\x00\x00\x00\x80(X\x03\x00\x00\x00abcq' b'\x04h\x04c__main__\nC\nq\x05)\x81q' b'\x06}q\x07(X\x03\x00\x00\x00barq\x08K\x02X\x03\x00' b'\x00\x00fooq\tK\x01ubh\x06tq\nh\nK\x05' b'e.' ) # Disassembly of DATA3 DATA3_DIS = """\ 0: \x80 PROTO 3 2: ] EMPTY_LIST 3: q BINPUT 0 5: ( MARK 6: K BININT1 0 8: K BININT1 1 10: G BINFLOAT 2.0 19: c GLOBAL 'builtins complex' 37: q BINPUT 1 39: G BINFLOAT 3.0 48: G BINFLOAT 0.0 57: \x86 TUPLE2 58: q BINPUT 2 60: R REDUCE 61: q BINPUT 3 63: K BININT1 1 65: J BININT -1 70: K BININT1 255 72: J BININT -255 77: J BININT -256 82: M BININT2 65535 85: J BININT -65535 90: J BININT -65536 95: J BININT 2147483647 100: J BININT -2147483647 105: J BININT -2147483648 110: ( MARK 111: X BINUNICODE 'abc' 119: q BINPUT 4 121: h BINGET 4 123: c GLOBAL '__main__ C' 135: q BINPUT 5 137: ) EMPTY_TUPLE 138: \x81 NEWOBJ 139: q BINPUT 6 141: } EMPTY_DICT 142: q BINPUT 7 144: ( MARK 145: X BINUNICODE 'bar' 153: q BINPUT 8 155: K BININT1 2 157: X BINUNICODE 'foo' 165: q BINPUT 9 167: K BININT1 1 169: u SETITEMS (MARK at 144) 170: b BUILD 171: h BINGET 6 173: t TUPLE (MARK at 110) 174: q BINPUT 10 176: h BINGET 10 178: K BININT1 5 180: e APPENDS (MARK at 5) 181: . STOP highest protocol among opcodes = 2 """ DATA4 = ( b'\x80\x04\x95\xa8\x00\x00\x00\x00\x00\x00\x00]\x94(K\x00K\x01G@' b'\x00\x00\x00\x00\x00\x00\x00\x8c\x08builtins\x94\x8c\x07' b'complex\x94\x93\x94G@\x08\x00\x00\x00\x00\x00\x00G' b'\x00\x00\x00\x00\x00\x00\x00\x00\x86\x94R\x94K\x01J\xff\xff\xff\xffK' b'\xffJ\x01\xff\xff\xffJ\x00\xff\xff\xffM\xff\xffJ\x01\x00\xff\xffJ' b'\x00\x00\xff\xffJ\xff\xff\xff\x7fJ\x01\x00\x00\x80J\x00\x00\x00\x80(' b'\x8c\x03abc\x94h\x06\x8c\x08__main__\x94\x8c' b'\x01C\x94\x93\x94)\x81\x94}\x94(\x8c\x03bar\x94K\x02\x8c' b'\x03foo\x94K\x01ubh\nt\x94h\x0eK\x05e.' ) # Disassembly of DATA4 DATA4_DIS = """\ 0: \x80 PROTO 4 2: \x95 FRAME 168 11: ] EMPTY_LIST 12: \x94 MEMOIZE 13: ( MARK 14: K BININT1 0 16: K BININT1 1 18: G BINFLOAT 2.0 27: \x8c SHORT_BINUNICODE 'builtins' 37: \x94 MEMOIZE 38: \x8c SHORT_BINUNICODE 'complex' 47: \x94 MEMOIZE 48: \x93 STACK_GLOBAL 49: \x94 MEMOIZE 50: G BINFLOAT 3.0 59: G BINFLOAT 0.0 68: \x86 TUPLE2 69: \x94 MEMOIZE 70: R REDUCE 71: \x94 MEMOIZE 72: K BININT1 1 74: J BININT -1 79: K BININT1 255 81: J BININT -255 86: J BININT -256 91: M BININT2 65535 94: J BININT -65535 99: J BININT -65536 104: J BININT 2147483647 109: J BININT -2147483647 114: J BININT -2147483648 119: ( MARK 120: \x8c SHORT_BINUNICODE 'abc' 125: \x94 MEMOIZE 126: h BINGET 6 128: \x8c SHORT_BINUNICODE '__main__' 138: \x94 MEMOIZE 139: \x8c SHORT_BINUNICODE 'C' 142: \x94 MEMOIZE 143: \x93 STACK_GLOBAL 144: \x94 MEMOIZE 145: ) EMPTY_TUPLE 146: \x81 NEWOBJ 147: \x94 MEMOIZE 148: } EMPTY_DICT 149: \x94 MEMOIZE 150: ( MARK 151: \x8c SHORT_BINUNICODE 'bar' 156: \x94 MEMOIZE 157: K BININT1 2 159: \x8c SHORT_BINUNICODE 'foo' 164: \x94 MEMOIZE 165: K BININT1 1 167: u SETITEMS (MARK at 150) 168: b BUILD 169: h BINGET 10 171: t TUPLE (MARK at 119) 172: \x94 MEMOIZE 173: h BINGET 14 175: K BININT1 5 177: e APPENDS (MARK at 13) 178: . STOP highest protocol among opcodes = 4 """ # set([1,2]) pickled from 2.x with protocol 2 DATA_SET = b'\x80\x02c__builtin__\nset\nq\x00]q\x01(K\x01K\x02e\x85q\x02Rq\x03.' # xrange(5) pickled from 2.x with protocol 2 DATA_XRANGE = b'\x80\x02c__builtin__\nxrange\nq\x00K\x00K\x05K\x01\x87q\x01Rq\x02.' # a SimpleCookie() object pickled from 2.x with protocol 2 DATA_COOKIE = (b'\x80\x02cCookie\nSimpleCookie\nq\x00)\x81q\x01U\x03key' b'q\x02cCookie\nMorsel\nq\x03)\x81q\x04(U\x07commentq\x05U' b'\x00q\x06U\x06domainq\x07h\x06U\x06secureq\x08h\x06U\x07' b'expiresq\th\x06U\x07max-ageq\nh\x06U\x07versionq\x0bh\x06U' b'\x04pathq\x0ch\x06U\x08httponlyq\rh\x06u}q\x0e(U\x0b' b'coded_valueq\x0fU\x05valueq\x10h\x10h\x10h\x02h\x02ubs}q\x11b.') # set([3]) pickled from 2.x with protocol 2 DATA_SET2 = b'\x80\x02c__builtin__\nset\nq\x00]q\x01K\x03a\x85q\x02Rq\x03.' python2_exceptions_without_args = ( ArithmeticError, AssertionError, AttributeError, BaseException, BufferError, BytesWarning, DeprecationWarning, EOFError, EnvironmentError, Exception, FloatingPointError, FutureWarning, GeneratorExit, IOError, ImportError, ImportWarning, IndentationError, IndexError, KeyError, KeyboardInterrupt, LookupError, MemoryError, NameError, NotImplementedError, OSError, OverflowError, PendingDeprecationWarning, ReferenceError, RuntimeError, RuntimeWarning, # StandardError is gone in Python 3, we map it to Exception StopIteration, SyntaxError, SyntaxWarning, SystemError, SystemExit, TabError, TypeError, UnboundLocalError, UnicodeError, UnicodeWarning, UserWarning, ValueError, Warning, ZeroDivisionError, ) exception_pickle = b'\x80\x02cexceptions\n?\nq\x00)Rq\x01.' # UnicodeEncodeError object pickled from 2.x with protocol 2 DATA_UEERR = (b'\x80\x02cexceptions\nUnicodeEncodeError\n' b'q\x00(U\x05asciiq\x01X\x03\x00\x00\x00fooq\x02K\x00K\x01' b'U\x03badq\x03tq\x04Rq\x05.') def create_data(): c = C() c.foo = 1 c.bar = 2 x = [0, 1, 2.0, 3.0+0j] # Append some integer test cases at cPickle.c's internal size # cutoffs. uint1max = 0xff uint2max = 0xffff int4max = 0x7fffffff x.extend([1, -1, uint1max, -uint1max, -uint1max-1, uint2max, -uint2max, -uint2max-1, int4max, -int4max, -int4max-1]) y = ('abc', 'abc', c, c) x.append(y) x.append(y) x.append(5) return x class AbstractUnpickleTests: # Subclass must define self.loads. _testdata = create_data() def assert_is_copy(self, obj, objcopy, msg=None): """Utility method to verify if two objects are copies of each others. """ if msg is None: msg = "{!r} is not a copy of {!r}".format(obj, objcopy) self.assertEqual(obj, objcopy, msg=msg) self.assertIs(type(obj), type(objcopy), msg=msg) if hasattr(obj, '__dict__'): self.assertDictEqual(obj.__dict__, objcopy.__dict__, msg=msg) self.assertIsNot(obj.__dict__, objcopy.__dict__, msg=msg) if hasattr(obj, '__slots__'): self.assertListEqual(obj.__slots__, objcopy.__slots__, msg=msg) for slot in obj.__slots__: self.assertEqual( hasattr(obj, slot), hasattr(objcopy, slot), msg=msg) self.assertEqual(getattr(obj, slot, None), getattr(objcopy, slot, None), msg=msg) def check_unpickling_error(self, errors, data): with self.subTest(data=data), \ self.assertRaises(errors): try: self.loads(data) except BaseException as exc: if support.verbose > 1: print('%-32r - %s: %s' % (data, exc.__class__.__name__, exc)) raise def test_load_from_data0(self): self.assert_is_copy(self._testdata, self.loads(DATA0)) def test_load_from_data1(self): self.assert_is_copy(self._testdata, self.loads(DATA1)) def test_load_from_data2(self): self.assert_is_copy(self._testdata, self.loads(DATA2)) def test_load_from_data3(self): self.assert_is_copy(self._testdata, self.loads(DATA3)) def test_load_from_data4(self): self.assert_is_copy(self._testdata, self.loads(DATA4)) def test_load_classic_instance(self): # See issue5180. Test loading 2.x pickles that # contain an instance of old style class. for X, args in [(C, ()), (D, ('x',)), (E, ())]: xname = X.__name__.encode('ascii') # Protocol 0 (text mode pickle): """ 0: ( MARK 1: i INST '__main__ X' (MARK at 0) 13: p PUT 0 16: ( MARK 17: d DICT (MARK at 16) 18: p PUT 1 21: b BUILD 22: . STOP """ pickle0 = (b"(i__main__\n" b"X\n" b"p0\n" b"(dp1\nb.").replace(b'X', xname) self.assert_is_copy(X(*args), self.loads(pickle0)) # Protocol 1 (binary mode pickle) """ 0: ( MARK 1: c GLOBAL '__main__ X' 13: q BINPUT 0 15: o OBJ (MARK at 0) 16: q BINPUT 1 18: } EMPTY_DICT 19: q BINPUT 2 21: b BUILD 22: . STOP """ pickle1 = (b'(c__main__\n' b'X\n' b'q\x00oq\x01}q\x02b.').replace(b'X', xname) self.assert_is_copy(X(*args), self.loads(pickle1)) # Protocol 2 (pickle2 = b'\x80\x02' + pickle1) """ 0: \x80 PROTO 2 2: ( MARK 3: c GLOBAL '__main__ X' 15: q BINPUT 0 17: o OBJ (MARK at 2) 18: q BINPUT 1 20: } EMPTY_DICT 21: q BINPUT 2 23: b BUILD 24: . STOP """ pickle2 = (b'\x80\x02(c__main__\n' b'X\n' b'q\x00oq\x01}q\x02b.').replace(b'X', xname) self.assert_is_copy(X(*args), self.loads(pickle2)) def test_maxint64(self): maxint64 = (1 << 63) - 1 data = b'I' + str(maxint64).encode("ascii") + b'\n.' got = self.loads(data) self.assert_is_copy(maxint64, got) # Try too with a bogus literal. data = b'I' + str(maxint64).encode("ascii") + b'JUNK\n.' self.check_unpickling_error(ValueError, data) def test_unpickle_from_2x(self): # Unpickle non-trivial data from Python 2.x. loaded = self.loads(DATA_SET) self.assertEqual(loaded, set([1, 2])) loaded = self.loads(DATA_XRANGE) self.assertEqual(type(loaded), type(range(0))) self.assertEqual(list(loaded), list(range(5))) loaded = self.loads(DATA_COOKIE) self.assertEqual(type(loaded), SimpleCookie) self.assertEqual(list(loaded.keys()), ["key"]) self.assertEqual(loaded["key"].value, "value") # Exception objects without arguments pickled from 2.x with protocol 2 for exc in python2_exceptions_without_args: data = exception_pickle.replace(b'?', exc.__name__.encode("ascii")) loaded = self.loads(data) self.assertIs(type(loaded), exc) # StandardError is mapped to Exception, test that separately loaded = self.loads(exception_pickle.replace(b'?', b'StandardError')) self.assertIs(type(loaded), Exception) loaded = self.loads(DATA_UEERR) self.assertIs(type(loaded), UnicodeEncodeError) self.assertEqual(loaded.object, "foo") self.assertEqual(loaded.encoding, "ascii") self.assertEqual(loaded.start, 0) self.assertEqual(loaded.end, 1) self.assertEqual(loaded.reason, "bad") def test_load_python2_str_as_bytes(self): # From Python 2: pickle.dumps('a\x00\xa0', protocol=0) self.assertEqual(self.loads(b"S'a\\x00\\xa0'\n.", encoding="bytes"), b'a\x00\xa0') # From Python 2: pickle.dumps('a\x00\xa0', protocol=1) self.assertEqual(self.loads(b'U\x03a\x00\xa0.', encoding="bytes"), b'a\x00\xa0') # From Python 2: pickle.dumps('a\x00\xa0', protocol=2) self.assertEqual(self.loads(b'\x80\x02U\x03a\x00\xa0.', encoding="bytes"), b'a\x00\xa0') def test_load_python2_unicode_as_str(self): # From Python 2: pickle.dumps(u'π', protocol=0) self.assertEqual(self.loads(b'V\\u03c0\n.', encoding='bytes'), 'π') # From Python 2: pickle.dumps(u'π', protocol=1) self.assertEqual(self.loads(b'X\x02\x00\x00\x00\xcf\x80.', encoding="bytes"), 'π') # From Python 2: pickle.dumps(u'π', protocol=2) self.assertEqual(self.loads(b'\x80\x02X\x02\x00\x00\x00\xcf\x80.', encoding="bytes"), 'π') def test_load_long_python2_str_as_bytes(self): # From Python 2: pickle.dumps('x' * 300, protocol=1) self.assertEqual(self.loads(pickle.BINSTRING + struct.pack("', '<\\\u1234>', '<\n>', '<\\>', '<\\\U00012345>', # surrogates '<\udc80>'] for proto in protocols: for u in endcases: p = self.dumps(u, proto) u2 = self.loads(p) self.assert_is_copy(u, u2) def test_unicode_high_plane(self): t = '\U00012345' for proto in protocols: p = self.dumps(t, proto) t2 = self.loads(p) self.assert_is_copy(t, t2) def test_bytes(self): for proto in protocols: for s in b'', b'xyz', b'xyz'*100: p = self.dumps(s, proto) self.assert_is_copy(s, self.loads(p)) for s in [bytes([i]) for i in range(256)]: p = self.dumps(s, proto) self.assert_is_copy(s, self.loads(p)) for s in [bytes([i, i]) for i in range(256)]: p = self.dumps(s, proto) self.assert_is_copy(s, self.loads(p)) def test_bytearray(self): for proto in protocols: for s in b'', b'xyz', b'xyz'*100: b = bytearray(s) p = self.dumps(b, proto) bb = self.loads(p) self.assertIsNot(bb, b) self.assert_is_copy(b, bb) if proto <= 3: # bytearray is serialized using a global reference self.assertIn(b'bytearray', p) self.assertTrue(opcode_in_pickle(pickle.GLOBAL, p)) elif proto == 4: self.assertIn(b'bytearray', p) self.assertTrue(opcode_in_pickle(pickle.STACK_GLOBAL, p)) elif proto == 5: self.assertNotIn(b'bytearray', p) self.assertTrue(opcode_in_pickle(pickle.BYTEARRAY8, p)) def test_bytearray_memoization_bug(self): for proto in protocols: for s in b'', b'xyz', b'xyz'*100: b = bytearray(s) p = self.dumps((b, b), proto) b1, b2 = self.loads(p) self.assertIs(b1, b2) def test_ints(self): for proto in protocols: n = sys.maxsize while n: for expected in (-n, n): s = self.dumps(expected, proto) n2 = self.loads(s) self.assert_is_copy(expected, n2) n = n >> 1 def test_long(self): for proto in protocols: # 256 bytes is where LONG4 begins. for nbits in 1, 8, 8*254, 8*255, 8*256, 8*257: nbase = 1 << nbits for npos in nbase-1, nbase, nbase+1: for n in npos, -npos: pickle = self.dumps(n, proto) got = self.loads(pickle) self.assert_is_copy(n, got) # Try a monster. This is quadratic-time in protos 0 & 1, so don't # bother with those. nbase = int("deadbeeffeedface", 16) nbase += nbase << 1000000 for n in nbase, -nbase: p = self.dumps(n, 2) got = self.loads(p) # assert_is_copy is very expensive here as it precomputes # a failure message by computing the repr() of n and got, # we just do the check ourselves. self.assertIs(type(got), int) self.assertEqual(n, got) def test_float(self): test_values = [0.0, 4.94e-324, 1e-310, 7e-308, 6.626e-34, 0.1, 0.5, 3.14, 263.44582062374053, 6.022e23, 1e30] test_values = test_values + [-x for x in test_values] for proto in protocols: for value in test_values: pickle = self.dumps(value, proto) got = self.loads(pickle) self.assert_is_copy(value, got) @run_with_locale('LC_ALL', 'de_DE', 'fr_FR') def test_float_format(self): # make sure that floats are formatted locale independent with proto 0 self.assertEqual(self.dumps(1.2, 0)[0:3], b'F1.') def test_reduce(self): for proto in protocols: inst = AAA() dumped = self.dumps(inst, proto) loaded = self.loads(dumped) self.assertEqual(loaded, REDUCE_A) def test_getinitargs(self): for proto in protocols: inst = initarg(1, 2) dumped = self.dumps(inst, proto) loaded = self.loads(dumped) self.assert_is_copy(inst, loaded) def test_metaclass(self): a = use_metaclass() for proto in protocols: s = self.dumps(a, proto) b = self.loads(s) self.assertEqual(a.__class__, b.__class__) def test_dynamic_class(self): a = create_dynamic_class("my_dynamic_class", (object,)) copyreg.pickle(pickling_metaclass, pickling_metaclass.__reduce__) for proto in protocols: s = self.dumps(a, proto) b = self.loads(s) self.assertEqual(a, b) self.assertIs(type(a), type(b)) def test_structseq(self): import time import os t = time.localtime() for proto in protocols: s = self.dumps(t, proto) u = self.loads(s) self.assert_is_copy(t, u) t = os.stat(os.curdir) s = self.dumps(t, proto) u = self.loads(s) self.assert_is_copy(t, u) if hasattr(os, "statvfs"): t = os.statvfs(os.curdir) s = self.dumps(t, proto) u = self.loads(s) self.assert_is_copy(t, u) def test_ellipsis(self): for proto in protocols: s = self.dumps(..., proto) u = self.loads(s) self.assertIs(..., u) def test_notimplemented(self): for proto in protocols: s = self.dumps(NotImplemented, proto) u = self.loads(s) self.assertIs(NotImplemented, u) def test_singleton_types(self): # Issue #6477: Test that types of built-in singletons can be pickled. singletons = [None, ..., NotImplemented] for singleton in singletons: for proto in protocols: s = self.dumps(type(singleton), proto) u = self.loads(s) self.assertIs(type(singleton), u) def test_builtin_types(self): for t in builtins.__dict__.values(): if isinstance(t, type) and not issubclass(t, BaseException): for proto in protocols: s = self.dumps(t, proto) self.assertIs(self.loads(s), t) def test_builtin_exceptions(self): for t in builtins.__dict__.values(): if isinstance(t, type) and issubclass(t, BaseException): for proto in protocols: s = self.dumps(t, proto) u = self.loads(s) if proto <= 2 and issubclass(t, OSError) and t is not BlockingIOError: self.assertIs(u, OSError) elif proto <= 2 and issubclass(t, ImportError): self.assertIs(u, ImportError) else: self.assertIs(u, t) def test_builtin_functions(self): for t in builtins.__dict__.values(): if isinstance(t, types.BuiltinFunctionType): for proto in protocols: s = self.dumps(t, proto) self.assertIs(self.loads(s), t) # Tests for protocol 2 def test_proto(self): for proto in protocols: pickled = self.dumps(None, proto) if proto >= 2: proto_header = pickle.PROTO + bytes([proto]) self.assertTrue(pickled.startswith(proto_header)) else: self.assertEqual(count_opcode(pickle.PROTO, pickled), 0) oob = protocols[-1] + 1 # a future protocol build_none = pickle.NONE + pickle.STOP badpickle = pickle.PROTO + bytes([oob]) + build_none try: self.loads(badpickle) except ValueError as err: self.assertIn("unsupported pickle protocol", str(err)) else: self.fail("expected bad protocol number to raise ValueError") def test_long1(self): x = 12345678910111213141516178920 for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) self.assertEqual(opcode_in_pickle(pickle.LONG1, s), proto >= 2) def test_long4(self): x = 12345678910111213141516178920 << (256*8) for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) self.assertEqual(opcode_in_pickle(pickle.LONG4, s), proto >= 2) def test_short_tuples(self): # Map (proto, len(tuple)) to expected opcode. expected_opcode = {(0, 0): pickle.TUPLE, (0, 1): pickle.TUPLE, (0, 2): pickle.TUPLE, (0, 3): pickle.TUPLE, (0, 4): pickle.TUPLE, (1, 0): pickle.EMPTY_TUPLE, (1, 1): pickle.TUPLE, (1, 2): pickle.TUPLE, (1, 3): pickle.TUPLE, (1, 4): pickle.TUPLE, (2, 0): pickle.EMPTY_TUPLE, (2, 1): pickle.TUPLE1, (2, 2): pickle.TUPLE2, (2, 3): pickle.TUPLE3, (2, 4): pickle.TUPLE, (3, 0): pickle.EMPTY_TUPLE, (3, 1): pickle.TUPLE1, (3, 2): pickle.TUPLE2, (3, 3): pickle.TUPLE3, (3, 4): pickle.TUPLE, } a = () b = (1,) c = (1, 2) d = (1, 2, 3) e = (1, 2, 3, 4) for proto in protocols: for x in a, b, c, d, e: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) expected = expected_opcode[min(proto, 3), len(x)] self.assertTrue(opcode_in_pickle(expected, s)) def test_singletons(self): # Map (proto, singleton) to expected opcode. expected_opcode = {(0, None): pickle.NONE, (1, None): pickle.NONE, (2, None): pickle.NONE, (3, None): pickle.NONE, (0, True): pickle.INT, (1, True): pickle.INT, (2, True): pickle.NEWTRUE, (3, True): pickle.NEWTRUE, (0, False): pickle.INT, (1, False): pickle.INT, (2, False): pickle.NEWFALSE, (3, False): pickle.NEWFALSE, } for proto in protocols: for x in None, False, True: s = self.dumps(x, proto) y = self.loads(s) self.assertTrue(x is y, (proto, x, s, y)) expected = expected_opcode[min(proto, 3), x] self.assertTrue(opcode_in_pickle(expected, s)) def test_newobj_tuple(self): x = MyTuple([1, 2, 3]) x.foo = 42 x.bar = "hello" for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) def test_newobj_list(self): x = MyList([1, 2, 3]) x.foo = 42 x.bar = "hello" for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) def test_newobj_generic(self): for proto in protocols: for C in myclasses: B = C.__base__ x = C(C.sample) x.foo = 42 s = self.dumps(x, proto) y = self.loads(s) detail = (proto, C, B, x, y, type(y)) self.assert_is_copy(x, y) # XXX revisit self.assertEqual(B(x), B(y), detail) self.assertEqual(x.__dict__, y.__dict__, detail) def test_newobj_proxies(self): # NEWOBJ should use the __class__ rather than the raw type classes = myclasses[:] # Cannot create weakproxies to these classes for c in (MyInt, MyTuple): classes.remove(c) for proto in protocols: for C in classes: B = C.__base__ x = C(C.sample) x.foo = 42 p = weakref.proxy(x) s = self.dumps(p, proto) y = self.loads(s) self.assertEqual(type(y), type(x)) # rather than type(p) detail = (proto, C, B, x, y, type(y)) self.assertEqual(B(x), B(y), detail) self.assertEqual(x.__dict__, y.__dict__, detail) def test_newobj_overridden_new(self): # Test that Python class with C implemented __new__ is pickleable for proto in protocols: x = MyIntWithNew2(1) x.foo = 42 s = self.dumps(x, proto) y = self.loads(s) self.assertIs(type(y), MyIntWithNew2) self.assertEqual(int(y), 1) self.assertEqual(y.foo, 42) def test_newobj_not_class(self): # Issue 24552 global SimpleNewObj save = SimpleNewObj o = SimpleNewObj.__new__(SimpleNewObj) b = self.dumps(o, 4) try: SimpleNewObj = 42 self.assertRaises((TypeError, pickle.UnpicklingError), self.loads, b) finally: SimpleNewObj = save # Register a type with copyreg, with extension code extcode. Pickle # an object of that type. Check that the resulting pickle uses opcode # (EXT[124]) under proto 2, and not in proto 1. def produce_global_ext(self, extcode, opcode): e = ExtensionSaver(extcode) try: copyreg.add_extension(__name__, "MyList", extcode) x = MyList([1, 2, 3]) x.foo = 42 x.bar = "hello" # Dump using protocol 1 for comparison. s1 = self.dumps(x, 1) self.assertIn(__name__.encode("utf-8"), s1) self.assertIn(b"MyList", s1) self.assertFalse(opcode_in_pickle(opcode, s1)) y = self.loads(s1) self.assert_is_copy(x, y) # Dump using protocol 2 for test. s2 = self.dumps(x, 2) self.assertNotIn(__name__.encode("utf-8"), s2) self.assertNotIn(b"MyList", s2) self.assertEqual(opcode_in_pickle(opcode, s2), True, repr(s2)) y = self.loads(s2) self.assert_is_copy(x, y) finally: e.restore() def test_global_ext1(self): self.produce_global_ext(0x00000001, pickle.EXT1) # smallest EXT1 code self.produce_global_ext(0x000000ff, pickle.EXT1) # largest EXT1 code def test_global_ext2(self): self.produce_global_ext(0x00000100, pickle.EXT2) # smallest EXT2 code self.produce_global_ext(0x0000ffff, pickle.EXT2) # largest EXT2 code self.produce_global_ext(0x0000abcd, pickle.EXT2) # check endianness def test_global_ext4(self): self.produce_global_ext(0x00010000, pickle.EXT4) # smallest EXT4 code self.produce_global_ext(0x7fffffff, pickle.EXT4) # largest EXT4 code self.produce_global_ext(0x12abcdef, pickle.EXT4) # check endianness def test_list_chunking(self): n = 10 # too small to chunk x = list(range(n)) for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) num_appends = count_opcode(pickle.APPENDS, s) self.assertEqual(num_appends, proto > 0) n = 2500 # expect at least two chunks when proto > 0 x = list(range(n)) for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) num_appends = count_opcode(pickle.APPENDS, s) if proto == 0: self.assertEqual(num_appends, 0) else: self.assertTrue(num_appends >= 2) def test_dict_chunking(self): n = 10 # too small to chunk x = dict.fromkeys(range(n)) for proto in protocols: s = self.dumps(x, proto) self.assertIsInstance(s, bytes_types) y = self.loads(s) self.assert_is_copy(x, y) num_setitems = count_opcode(pickle.SETITEMS, s) self.assertEqual(num_setitems, proto > 0) n = 2500 # expect at least two chunks when proto > 0 x = dict.fromkeys(range(n)) for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) num_setitems = count_opcode(pickle.SETITEMS, s) if proto == 0: self.assertEqual(num_setitems, 0) else: self.assertTrue(num_setitems >= 2) def test_set_chunking(self): n = 10 # too small to chunk x = set(range(n)) for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) num_additems = count_opcode(pickle.ADDITEMS, s) if proto < 4: self.assertEqual(num_additems, 0) else: self.assertEqual(num_additems, 1) n = 2500 # expect at least two chunks when proto >= 4 x = set(range(n)) for proto in protocols: s = self.dumps(x, proto) y = self.loads(s) self.assert_is_copy(x, y) num_additems = count_opcode(pickle.ADDITEMS, s) if proto < 4: self.assertEqual(num_additems, 0) else: self.assertGreaterEqual(num_additems, 2) def test_simple_newobj(self): x = SimpleNewObj.__new__(SimpleNewObj, 0xface) # avoid __init__ x.abc = 666 for proto in protocols: with self.subTest(proto=proto): s = self.dumps(x, proto) if proto < 1: self.assertIn(b'\nI64206', s) # INT else: self.assertIn(b'M\xce\xfa', s) # BININT2 self.assertEqual(opcode_in_pickle(pickle.NEWOBJ, s), 2 <= proto) self.assertFalse(opcode_in_pickle(pickle.NEWOBJ_EX, s)) y = self.loads(s) # will raise TypeError if __init__ called self.assert_is_copy(x, y) def test_complex_newobj(self): x = ComplexNewObj.__new__(ComplexNewObj, 0xface) # avoid __init__ x.abc = 666 for proto in protocols: with self.subTest(proto=proto): s = self.dumps(x, proto) if proto < 1: self.assertIn(b'\nI64206', s) # INT elif proto < 2: self.assertIn(b'M\xce\xfa', s) # BININT2 elif proto < 4: self.assertIn(b'X\x04\x00\x00\x00FACE', s) # BINUNICODE else: self.assertIn(b'\x8c\x04FACE', s) # SHORT_BINUNICODE self.assertEqual(opcode_in_pickle(pickle.NEWOBJ, s), 2 <= proto) self.assertFalse(opcode_in_pickle(pickle.NEWOBJ_EX, s)) y = self.loads(s) # will raise TypeError if __init__ called self.assert_is_copy(x, y) def test_complex_newobj_ex(self): x = ComplexNewObjEx.__new__(ComplexNewObjEx, 0xface) # avoid __init__ x.abc = 666 for proto in protocols: with self.subTest(proto=proto): s = self.dumps(x, proto) if proto < 1: self.assertIn(b'\nI64206', s) # INT elif proto < 2: self.assertIn(b'M\xce\xfa', s) # BININT2 elif proto < 4: self.assertIn(b'X\x04\x00\x00\x00FACE', s) # BINUNICODE else: self.assertIn(b'\x8c\x04FACE', s) # SHORT_BINUNICODE self.assertFalse(opcode_in_pickle(pickle.NEWOBJ, s)) self.assertEqual(opcode_in_pickle(pickle.NEWOBJ_EX, s), 4 <= proto) y = self.loads(s) # will raise TypeError if __init__ called self.assert_is_copy(x, y) def test_newobj_list_slots(self): x = SlotList([1, 2, 3]) x.foo = 42 x.bar = "hello" s = self.dumps(x, 2) y = self.loads(s) self.assert_is_copy(x, y) def test_reduce_overrides_default_reduce_ex(self): for proto in protocols: x = REX_one() self.assertEqual(x._reduce_called, 0) s = self.dumps(x, proto) self.assertEqual(x._reduce_called, 1) y = self.loads(s) self.assertEqual(y._reduce_called, 0) def test_reduce_ex_called(self): for proto in protocols: x = REX_two() self.assertEqual(x._proto, None) s = self.dumps(x, proto) self.assertEqual(x._proto, proto) y = self.loads(s) self.assertEqual(y._proto, None) def test_reduce_ex_overrides_reduce(self): for proto in protocols: x = REX_three() self.assertEqual(x._proto, None) s = self.dumps(x, proto) self.assertEqual(x._proto, proto) y = self.loads(s) self.assertEqual(y._proto, None) def test_reduce_ex_calls_base(self): for proto in protocols: x = REX_four() self.assertEqual(x._proto, None) s = self.dumps(x, proto) self.assertEqual(x._proto, proto) y = self.loads(s) self.assertEqual(y._proto, proto) def test_reduce_calls_base(self): for proto in protocols: x = REX_five() self.assertEqual(x._reduce_called, 0) s = self.dumps(x, proto) self.assertEqual(x._reduce_called, 1) y = self.loads(s) self.assertEqual(y._reduce_called, 1) def test_reduce_ex_None(self): c = REX_None() with self.assertRaises(TypeError): self.dumps(c) def test_reduce_None(self): c = R_None() with self.assertRaises(TypeError): self.dumps(c) def test_pickle_setstate_None(self): c = C_None_setstate() p = self.dumps(c) with self.assertRaises(TypeError): self.loads(p) @no_tracing def test_bad_getattr(self): # Issue #3514: crash when there is an infinite loop in __getattr__ x = BadGetattr() for proto in range(2): with support.infinite_recursion(): self.assertRaises(RuntimeError, self.dumps, x, proto) for proto in range(2, pickle.HIGHEST_PROTOCOL + 1): s = self.dumps(x, proto) def test_reduce_bad_iterator(self): # Issue4176: crash when 4th and 5th items of __reduce__() # are not iterators class C(object): def __reduce__(self): # 4th item is not an iterator return list, (), None, [], None class D(object): def __reduce__(self): # 5th item is not an iterator return dict, (), None, None, [] # Python implementation is less strict and also accepts iterables. for proto in protocols: try: self.dumps(C(), proto) except pickle.PicklingError: pass try: self.dumps(D(), proto) except pickle.PicklingError: pass def test_many_puts_and_gets(self): # Test that internal data structures correctly deal with lots of # puts/gets. keys = ("aaa" + str(i) for i in range(100)) large_dict = dict((k, [4, 5, 6]) for k in keys) obj = [dict(large_dict), dict(large_dict), dict(large_dict)] for proto in protocols: with self.subTest(proto=proto): dumped = self.dumps(obj, proto) loaded = self.loads(dumped) self.assert_is_copy(obj, loaded) def test_attribute_name_interning(self): # Test that attribute names of pickled objects are interned when # unpickling. for proto in protocols: x = C() x.foo = 42 x.bar = "hello" s = self.dumps(x, proto) y = self.loads(s) x_keys = sorted(x.__dict__) y_keys = sorted(y.__dict__) for x_key, y_key in zip(x_keys, y_keys): self.assertIs(x_key, y_key) def test_pickle_to_2x(self): # Pickle non-trivial data with protocol 2, expecting that it yields # the same result as Python 2.x did. # NOTE: this test is a bit too strong since we can produce different # bytecode that 2.x will still understand. dumped = self.dumps(range(5), 2) self.assertEqual(dumped, DATA_XRANGE) dumped = self.dumps(set([3]), 2) self.assertEqual(dumped, DATA_SET2) def test_large_pickles(self): # Test the correctness of internal buffering routines when handling # large data. for proto in protocols: data = (1, min, b'xy' * (30 * 1024), len) dumped = self.dumps(data, proto) loaded = self.loads(dumped) self.assertEqual(len(loaded), len(data)) self.assertEqual(loaded, data) def test_int_pickling_efficiency(self): # Test compacity of int representation (see issue #12744) for proto in protocols: with self.subTest(proto=proto): pickles = [self.dumps(2**n, proto) for n in range(70)] sizes = list(map(len, pickles)) # the size function is monotonic self.assertEqual(sorted(sizes), sizes) if proto >= 2: for p in pickles: self.assertFalse(opcode_in_pickle(pickle.LONG, p)) def _check_pickling_with_opcode(self, obj, opcode, proto): pickled = self.dumps(obj, proto) self.assertTrue(opcode_in_pickle(opcode, pickled)) unpickled = self.loads(pickled) self.assertEqual(obj, unpickled) def test_appends_on_non_lists(self): # Issue #17720 obj = REX_six([1, 2, 3]) for proto in protocols: if proto == 0: self._check_pickling_with_opcode(obj, pickle.APPEND, proto) else: self._check_pickling_with_opcode(obj, pickle.APPENDS, proto) def test_setitems_on_non_dicts(self): obj = REX_seven({1: -1, 2: -2, 3: -3}) for proto in protocols: if proto == 0: self._check_pickling_with_opcode(obj, pickle.SETITEM, proto) else: self._check_pickling_with_opcode(obj, pickle.SETITEMS, proto) # Exercise framing (proto >= 4) for significant workloads FRAME_SIZE_MIN = 4 FRAME_SIZE_TARGET = 64 * 1024 def check_frame_opcodes(self, pickled): """ Check the arguments of FRAME opcodes in a protocol 4+ pickle. Note that binary objects that are larger than FRAME_SIZE_TARGET are not framed by default and are therefore considered a frame by themselves in the following consistency check. """ frame_end = frameless_start = None frameless_opcodes = {'BINBYTES', 'BINUNICODE', 'BINBYTES8', 'BINUNICODE8', 'BYTEARRAY8'} for op, arg, pos in pickletools.genops(pickled): if frame_end is not None: self.assertLessEqual(pos, frame_end) if pos == frame_end: frame_end = None if frame_end is not None: # framed self.assertNotEqual(op.name, 'FRAME') if op.name in frameless_opcodes: # Only short bytes and str objects should be written # in a frame self.assertLessEqual(len(arg), self.FRAME_SIZE_TARGET) else: # not framed if (op.name == 'FRAME' or (op.name in frameless_opcodes and len(arg) > self.FRAME_SIZE_TARGET)): # Frame or large bytes or str object if frameless_start is not None: # Only short data should be written outside of a frame self.assertLess(pos - frameless_start, self.FRAME_SIZE_MIN) frameless_start = None elif frameless_start is None and op.name != 'PROTO': frameless_start = pos if op.name == 'FRAME': self.assertGreaterEqual(arg, self.FRAME_SIZE_MIN) frame_end = pos + 9 + arg pos = len(pickled) if frame_end is not None: self.assertEqual(frame_end, pos) elif frameless_start is not None: self.assertLess(pos - frameless_start, self.FRAME_SIZE_MIN) @support.skip_if_pgo_task @support.requires_resource('cpu') def test_framing_many_objects(self): obj = list(range(10**5)) for proto in range(4, pickle.HIGHEST_PROTOCOL + 1): with self.subTest(proto=proto): pickled = self.dumps(obj, proto) unpickled = self.loads(pickled) self.assertEqual(obj, unpickled) bytes_per_frame = (len(pickled) / count_opcode(pickle.FRAME, pickled)) self.assertGreater(bytes_per_frame, self.FRAME_SIZE_TARGET / 2) self.assertLessEqual(bytes_per_frame, self.FRAME_SIZE_TARGET * 1) self.check_frame_opcodes(pickled) def test_framing_large_objects(self): N = 1024 * 1024 small_items = [[i] for i in range(10)] obj = [b'x' * N, *small_items, b'y' * N, 'z' * N] for proto in range(4, pickle.HIGHEST_PROTOCOL + 1): for fast in [False, True]: with self.subTest(proto=proto, fast=fast): if not fast: # fast=False by default. # This covers in-memory pickling with pickle.dumps(). pickled = self.dumps(obj, proto) else: # Pickler is required when fast=True. if not hasattr(self, 'pickler'): continue buf = io.BytesIO() pickler = self.pickler(buf, protocol=proto) pickler.fast = fast pickler.dump(obj) pickled = buf.getvalue() unpickled = self.loads(pickled) # More informative error message in case of failure. self.assertEqual([len(x) for x in obj], [len(x) for x in unpickled]) # Perform full equality check if the lengths match. self.assertEqual(obj, unpickled) n_frames = count_opcode(pickle.FRAME, pickled) # A single frame for small objects between # first two large objects. self.assertEqual(n_frames, 1) self.check_frame_opcodes(pickled) def test_optional_frames(self): if pickle.HIGHEST_PROTOCOL < 4: return def remove_frames(pickled, keep_frame=None): """Remove frame opcodes from the given pickle.""" frame_starts = [] # 1 byte for the opcode and 8 for the argument frame_opcode_size = 9 for opcode, _, pos in pickletools.genops(pickled): if opcode.name == 'FRAME': frame_starts.append(pos) newpickle = bytearray() last_frame_end = 0 for i, pos in enumerate(frame_starts): if keep_frame and keep_frame(i): continue newpickle += pickled[last_frame_end:pos] last_frame_end = pos + frame_opcode_size newpickle += pickled[last_frame_end:] return newpickle frame_size = self.FRAME_SIZE_TARGET num_frames = 20 # Large byte objects (dict values) intermittent with small objects # (dict keys) for bytes_type in (bytes, bytearray): obj = {i: bytes_type([i]) * frame_size for i in range(num_frames)} for proto in range(4, pickle.HIGHEST_PROTOCOL + 1): pickled = self.dumps(obj, proto) frameless_pickle = remove_frames(pickled) self.assertEqual(count_opcode(pickle.FRAME, frameless_pickle), 0) self.assertEqual(obj, self.loads(frameless_pickle)) some_frames_pickle = remove_frames(pickled, lambda i: i % 2) self.assertLess(count_opcode(pickle.FRAME, some_frames_pickle), count_opcode(pickle.FRAME, pickled)) self.assertEqual(obj, self.loads(some_frames_pickle)) @support.skip_if_pgo_task def test_framed_write_sizes_with_delayed_writer(self): class ChunkAccumulator: """Accumulate pickler output in a list of raw chunks.""" def __init__(self): self.chunks = [] def write(self, chunk): self.chunks.append(chunk) def concatenate_chunks(self): return b"".join(self.chunks) for proto in range(4, pickle.HIGHEST_PROTOCOL + 1): objects = [(str(i).encode('ascii'), i % 42, {'i': str(i)}) for i in range(int(1e4))] # Add a large unique ASCII string objects.append('0123456789abcdef' * (self.FRAME_SIZE_TARGET // 16 + 1)) # Protocol 4 packs groups of small objects into frames and issues # calls to write only once or twice per frame: # The C pickler issues one call to write per-frame (header and # contents) while Python pickler issues two calls to write: one for # the frame header and one for the frame binary contents. writer = ChunkAccumulator() self.pickler(writer, proto).dump(objects) # Actually read the binary content of the chunks after the end # of the call to dump: any memoryview passed to write should not # be released otherwise this delayed access would not be possible. pickled = writer.concatenate_chunks() reconstructed = self.loads(pickled) self.assertEqual(reconstructed, objects) self.assertGreater(len(writer.chunks), 1) # memoryviews should own the memory. del objects support.gc_collect() self.assertEqual(writer.concatenate_chunks(), pickled) n_frames = (len(pickled) - 1) // self.FRAME_SIZE_TARGET + 1 # There should be at least one call to write per frame self.assertGreaterEqual(len(writer.chunks), n_frames) # but not too many either: there can be one for the proto, # one per-frame header, one per frame for the actual contents, # and two for the header. self.assertLessEqual(len(writer.chunks), 2 * n_frames + 3) chunk_sizes = [len(c) for c in writer.chunks] large_sizes = [s for s in chunk_sizes if s >= self.FRAME_SIZE_TARGET] medium_sizes = [s for s in chunk_sizes if 9 < s < self.FRAME_SIZE_TARGET] small_sizes = [s for s in chunk_sizes if s <= 9] # Large chunks should not be too large: for chunk_size in large_sizes: self.assertLess(chunk_size, 2 * self.FRAME_SIZE_TARGET, chunk_sizes) # There shouldn't bee too many small chunks: the protocol header, # the frame headers and the large string headers are written # in small chunks. self.assertLessEqual(len(small_sizes), len(large_sizes) + len(medium_sizes) + 3, chunk_sizes) def test_nested_names(self): global Nested class Nested: class A: class B: class C: pass for proto in range(pickle.HIGHEST_PROTOCOL + 1): for obj in [Nested.A, Nested.A.B, Nested.A.B.C]: with self.subTest(proto=proto, obj=obj): unpickled = self.loads(self.dumps(obj, proto)) self.assertIs(obj, unpickled) def test_recursive_nested_names(self): global Recursive class Recursive: pass Recursive.mod = sys.modules[Recursive.__module__] Recursive.__qualname__ = 'Recursive.mod.Recursive' for proto in range(pickle.HIGHEST_PROTOCOL + 1): with self.subTest(proto=proto): unpickled = self.loads(self.dumps(Recursive, proto)) self.assertIs(unpickled, Recursive) del Recursive.mod # break reference loop def test_py_methods(self): global PyMethodsTest class PyMethodsTest: @staticmethod def cheese(): return "cheese" @classmethod def wine(cls): assert cls is PyMethodsTest return "wine" def biscuits(self): assert isinstance(self, PyMethodsTest) return "biscuits" class Nested: "Nested class" @staticmethod def ketchup(): return "ketchup" @classmethod def maple(cls): assert cls is PyMethodsTest.Nested return "maple" def pie(self): assert isinstance(self, PyMethodsTest.Nested) return "pie" py_methods = ( PyMethodsTest.cheese, PyMethodsTest.wine, PyMethodsTest().biscuits, PyMethodsTest.Nested.ketchup, PyMethodsTest.Nested.maple, PyMethodsTest.Nested().pie ) py_unbound_methods = ( (PyMethodsTest.biscuits, PyMethodsTest), (PyMethodsTest.Nested.pie, PyMethodsTest.Nested) ) for proto in range(pickle.HIGHEST_PROTOCOL + 1): for method in py_methods: with self.subTest(proto=proto, method=method): unpickled = self.loads(self.dumps(method, proto)) self.assertEqual(method(), unpickled()) for method, cls in py_unbound_methods: obj = cls() with self.subTest(proto=proto, method=method): unpickled = self.loads(self.dumps(method, proto)) self.assertEqual(method(obj), unpickled(obj)) descriptors = ( PyMethodsTest.__dict__['cheese'], # static method descriptor PyMethodsTest.__dict__['wine'], # class method descriptor ) for proto in range(pickle.HIGHEST_PROTOCOL + 1): for descr in descriptors: with self.subTest(proto=proto, descr=descr): self.assertRaises(TypeError, self.dumps, descr, proto) def test_c_methods(self): global Subclass class Subclass(tuple): class Nested(str): pass c_methods = ( # bound built-in method ("abcd".index, ("c",)), # unbound built-in method (str.index, ("abcd", "c")), # bound "slot" method ([1, 2, 3].__len__, ()), # unbound "slot" method (list.__len__, ([1, 2, 3],)), # bound "coexist" method ({1, 2}.__contains__, (2,)), # unbound "coexist" method (set.__contains__, ({1, 2}, 2)), # built-in class method (dict.fromkeys, (("a", 1), ("b", 2))), # built-in static method (bytearray.maketrans, (b"abc", b"xyz")), # subclass methods (Subclass([1,2,2]).count, (2,)), (Subclass.count, (Subclass([1,2,2]), 2)), (Subclass.Nested("sweet").count, ("e",)), (Subclass.Nested.count, (Subclass.Nested("sweet"), "e")), ) for proto in range(pickle.HIGHEST_PROTOCOL + 1): for method, args in c_methods: with self.subTest(proto=proto, method=method): unpickled = self.loads(self.dumps(method, proto)) self.assertEqual(method(*args), unpickled(*args)) descriptors = ( bytearray.__dict__['maketrans'], # built-in static method descriptor dict.__dict__['fromkeys'], # built-in class method descriptor ) for proto in range(pickle.HIGHEST_PROTOCOL + 1): for descr in descriptors: with self.subTest(proto=proto, descr=descr): self.assertRaises(TypeError, self.dumps, descr, proto) def test_compat_pickle(self): tests = [ (range(1, 7), '__builtin__', 'xrange'), (map(int, '123'), 'itertools', 'imap'), (functools.reduce, '__builtin__', 'reduce'), (dbm.whichdb, 'whichdb', 'whichdb'), (Exception(), 'exceptions', 'Exception'), (collections.UserDict(), 'UserDict', 'IterableUserDict'), (collections.UserList(), 'UserList', 'UserList'), (collections.defaultdict(), 'collections', 'defaultdict'), ] for val, mod, name in tests: for proto in range(3): with self.subTest(type=type(val), proto=proto): pickled = self.dumps(val, proto) self.assertIn(('c%s\n%s' % (mod, name)).encode(), pickled) self.assertIs(type(self.loads(pickled)), type(val)) def test_local_lookup_error(self): # Test that whichmodule() errors out cleanly when looking up # an assumed globally-reachable object fails. def f(): pass # Since the function is local, lookup will fail for proto in range(0, pickle.HIGHEST_PROTOCOL + 1): with self.assertRaises((AttributeError, pickle.PicklingError)): pickletools.dis(self.dumps(f, proto)) # Same without a __module__ attribute (exercises a different path # in _pickle.c). del f.__module__ for proto in range(0, pickle.HIGHEST_PROTOCOL + 1): with self.assertRaises((AttributeError, pickle.PicklingError)): pickletools.dis(self.dumps(f, proto)) # Yet a different path. f.__name__ = f.__qualname__ for proto in range(0, pickle.HIGHEST_PROTOCOL + 1): with self.assertRaises((AttributeError, pickle.PicklingError)): pickletools.dis(self.dumps(f, proto)) # # PEP 574 tests below # def buffer_like_objects(self): # Yield buffer-like objects with the bytestring "abcdef" in them bytestring = b"abcdefgh" yield ZeroCopyBytes(bytestring) yield ZeroCopyBytearray(bytestring) if _testbuffer is not None: items = list(bytestring) value = int.from_bytes(bytestring, byteorder='little') for flags in (0, _testbuffer.ND_WRITABLE): # 1-D, contiguous yield PicklableNDArray(items, format='B', shape=(8,), flags=flags) # 2-D, C-contiguous yield PicklableNDArray(items, format='B', shape=(4, 2), strides=(2, 1), flags=flags) # 2-D, Fortran-contiguous yield PicklableNDArray(items, format='B', shape=(4, 2), strides=(1, 4), flags=flags) def test_in_band_buffers(self): # Test in-band buffers (PEP 574) for obj in self.buffer_like_objects(): for proto in range(0, pickle.HIGHEST_PROTOCOL + 1): data = self.dumps(obj, proto) if obj.c_contiguous and proto >= 5: # The raw memory bytes are serialized in physical order self.assertIn(b"abcdefgh", data) self.assertEqual(count_opcode(pickle.NEXT_BUFFER, data), 0) if proto >= 5: self.assertEqual(count_opcode(pickle.SHORT_BINBYTES, data), 1 if obj.readonly else 0) self.assertEqual(count_opcode(pickle.BYTEARRAY8, data), 0 if obj.readonly else 1) # Return a true value from buffer_callback should have # the same effect def buffer_callback(obj): return True data2 = self.dumps(obj, proto, buffer_callback=buffer_callback) self.assertEqual(data2, data) new = self.loads(data) # It's a copy self.assertIsNot(new, obj) self.assertIs(type(new), type(obj)) self.assertEqual(new, obj) # XXX Unfortunately cannot test non-contiguous array # (see comment in PicklableNDArray.__reduce_ex__) def test_oob_buffers(self): # Test out-of-band buffers (PEP 574) for obj in self.buffer_like_objects(): for proto in range(0, 5): # Need protocol >= 5 for buffer_callback with self.assertRaises(ValueError): self.dumps(obj, proto, buffer_callback=[].append) for proto in range(5, pickle.HIGHEST_PROTOCOL + 1): buffers = [] buffer_callback = lambda pb: buffers.append(pb.raw()) data = self.dumps(obj, proto, buffer_callback=buffer_callback) self.assertNotIn(b"abcdefgh", data) self.assertEqual(count_opcode(pickle.SHORT_BINBYTES, data), 0) self.assertEqual(count_opcode(pickle.BYTEARRAY8, data), 0) self.assertEqual(count_opcode(pickle.NEXT_BUFFER, data), 1) self.assertEqual(count_opcode(pickle.READONLY_BUFFER, data), 1 if obj.readonly else 0) if obj.c_contiguous: self.assertEqual(bytes(buffers[0]), b"abcdefgh") # Need buffers argument to unpickle properly with self.assertRaises(pickle.UnpicklingError): self.loads(data) new = self.loads(data, buffers=buffers) if obj.zero_copy_reconstruct: # Zero-copy achieved self.assertIs(new, obj) else: self.assertIs(type(new), type(obj)) self.assertEqual(new, obj) # Non-sequence buffers accepted too new = self.loads(data, buffers=iter(buffers)) if obj.zero_copy_reconstruct: # Zero-copy achieved self.assertIs(new, obj) else: self.assertIs(type(new), type(obj)) self.assertEqual(new, obj) def test_oob_buffers_writable_to_readonly(self): # Test reconstructing readonly object from writable buffer obj = ZeroCopyBytes(b"foobar") for proto in range(5, pickle.HIGHEST_PROTOCOL + 1): buffers = [] buffer_callback = buffers.append data = self.dumps(obj, proto, buffer_callback=buffer_callback) buffers = map(bytearray, buffers) new = self.loads(data, buffers=buffers) self.assertIs(type(new), type(obj)) self.assertEqual(new, obj) def test_picklebuffer_error(self): # PickleBuffer forbidden with protocol < 5 pb = pickle.PickleBuffer(b"foobar") for proto in range(0, 5): with self.assertRaises(pickle.PickleError): self.dumps(pb, proto) def test_buffer_callback_error(self): def buffer_callback(buffers): 1/0 pb = pickle.PickleBuffer(b"foobar") with self.assertRaises(ZeroDivisionError): self.dumps(pb, 5, buffer_callback=buffer_callback) def test_buffers_error(self): pb = pickle.PickleBuffer(b"foobar") for proto in range(5, pickle.HIGHEST_PROTOCOL + 1): data = self.dumps(pb, proto, buffer_callback=[].append) # Non iterable buffers with self.assertRaises(TypeError): self.loads(data, buffers=object()) # Buffer iterable exhausts too early with self.assertRaises(pickle.UnpicklingError): self.loads(data, buffers=[]) def test_inband_accept_default_buffers_argument(self): for proto in range(5, pickle.HIGHEST_PROTOCOL + 1): data_pickled = self.dumps(1, proto, buffer_callback=None) data = self.loads(data_pickled, buffers=None) @unittest.skipIf(np is None, "Test needs Numpy") def test_buffers_numpy(self): def check_no_copy(x, y): np.testing.assert_equal(x, y) self.assertEqual(x.ctypes.data, y.ctypes.data) def check_copy(x, y): np.testing.assert_equal(x, y) self.assertNotEqual(x.ctypes.data, y.ctypes.data) def check_array(arr): # In-band for proto in range(0, pickle.HIGHEST_PROTOCOL + 1): data = self.dumps(arr, proto) new = self.loads(data) check_copy(arr, new) for proto in range(5, pickle.HIGHEST_PROTOCOL + 1): buffer_callback = lambda _: True data = self.dumps(arr, proto, buffer_callback=buffer_callback) new = self.loads(data) check_copy(arr, new) # Out-of-band for proto in range(5, pickle.HIGHEST_PROTOCOL + 1): buffers = [] buffer_callback = buffers.append data = self.dumps(arr, proto, buffer_callback=buffer_callback) new = self.loads(data, buffers=buffers) if arr.flags.c_contiguous or arr.flags.f_contiguous: check_no_copy(arr, new) else: check_copy(arr, new) # 1-D arr = np.arange(6) check_array(arr) # 1-D, non-contiguous check_array(arr[::2]) # 2-D, C-contiguous arr = np.arange(12).reshape((3, 4)) check_array(arr) # 2-D, F-contiguous check_array(arr.T) # 2-D, non-contiguous check_array(arr[::2]) def test_evil_class_mutating_dict(self): # https://github.com/python/cpython/issues/92930 from random import getrandbits global Bad class Bad: def __eq__(self, other): return ENABLED def __hash__(self): return 42 def __reduce__(self): if getrandbits(6) == 0: collection.clear() return (Bad, ()) for proto in protocols: for _ in range(20): ENABLED = False collection = {Bad(): Bad() for _ in range(20)} for bad in collection: bad.bad = bad bad.collection = collection ENABLED = True try: data = self.dumps(collection, proto) self.loads(data) except RuntimeError as e: expected = "changed size during iteration" self.assertIn(expected, str(e)) def test_evil_pickler_mutating_collection(self): # https://github.com/python/cpython/issues/92930 if not hasattr(self, "pickler"): raise self.skipTest(f"{type(self)} has no associated pickler type") global Clearer class Clearer: pass def check(collection): class EvilPickler(self.pickler): def persistent_id(self, obj): if isinstance(obj, Clearer): collection.clear() return None pickler = EvilPickler(io.BytesIO(), proto) try: pickler.dump(collection) except RuntimeError as e: expected = "changed size during iteration" self.assertIn(expected, str(e)) for proto in protocols: check([Clearer()]) check([Clearer(), Clearer()]) check({Clearer()}) check({Clearer(), Clearer()}) check({Clearer(): 1}) check({Clearer(): 1, Clearer(): 2}) check({1: Clearer(), 2: Clearer()}) class BigmemPickleTests: # Binary protocols can serialize longs of up to 2 GiB-1 @bigmemtest(size=_2G, memuse=3.6, dry_run=False) def test_huge_long_32b(self, size): data = 1 << (8 * size) try: for proto in protocols: if proto < 2: continue with self.subTest(proto=proto): with self.assertRaises((ValueError, OverflowError)): self.dumps(data, protocol=proto) finally: data = None # Protocol 3 can serialize up to 4 GiB-1 as a bytes object # (older protocols don't have a dedicated opcode for bytes and are # too inefficient) @bigmemtest(size=_2G, memuse=2.5, dry_run=False) def test_huge_bytes_32b(self, size): data = b"abcd" * (size // 4) try: for proto in protocols: if proto < 3: continue with self.subTest(proto=proto): try: pickled = self.dumps(data, protocol=proto) header = (pickle.BINBYTES + struct.pack("= 5 for buffer_callback with self.assertRaises(ValueError): dumps(obj, protocol=proto, buffer_callback=[].append) for proto in range(5, pickle.HIGHEST_PROTOCOL + 1): buffers = [] buffer_callback = buffers.append data = dumps(obj, protocol=proto, buffer_callback=buffer_callback) self.assertNotIn(b"foo", data) self.assertEqual(bytes(buffers[0]), b"foo") # Need buffers argument to unpickle properly with self.assertRaises(pickle.UnpicklingError): loads(data) new = loads(data, buffers=buffers) self.assertIs(new, obj) def test_dumps_loads_oob_buffers(self): # Test out-of-band buffers (PEP 574) with top-level dumps() and loads() self.check_dumps_loads_oob_buffers(self.dumps, self.loads) def test_dump_load_oob_buffers(self): # Test out-of-band buffers (PEP 574) with top-level dump() and load() def dumps(obj, **kwargs): f = io.BytesIO() self.dump(obj, f, **kwargs) return f.getvalue() def loads(data, **kwargs): f = io.BytesIO(data) return self.load(f, **kwargs) self.check_dumps_loads_oob_buffers(dumps, loads) class AbstractPersistentPicklerTests: # This class defines persistent_id() and persistent_load() # functions that should be used by the pickler. All even integers # are pickled using persistent ids. def persistent_id(self, object): if isinstance(object, int) and object % 2 == 0: self.id_count += 1 return str(object) elif object == "test_false_value": self.false_count += 1 return "" else: return None def persistent_load(self, oid): if not oid: self.load_false_count += 1 return "test_false_value" else: self.load_count += 1 object = int(oid) assert object % 2 == 0 return object def test_persistence(self): L = list(range(10)) + ["test_false_value"] for proto in protocols: self.id_count = 0 self.false_count = 0 self.load_false_count = 0 self.load_count = 0 self.assertEqual(self.loads(self.dumps(L, proto)), L) self.assertEqual(self.id_count, 5) self.assertEqual(self.false_count, 1) self.assertEqual(self.load_count, 5) self.assertEqual(self.load_false_count, 1) class AbstractIdentityPersistentPicklerTests: def persistent_id(self, obj): return obj def persistent_load(self, pid): return pid def _check_return_correct_type(self, obj, proto): unpickled = self.loads(self.dumps(obj, proto)) self.assertIsInstance(unpickled, type(obj)) self.assertEqual(unpickled, obj) def test_return_correct_type(self): for proto in protocols: # Protocol 0 supports only ASCII strings. if proto == 0: self._check_return_correct_type("abc", 0) else: for obj in [b"abc\n", "abc\n", -1, -1.1 * 0.1, str]: self._check_return_correct_type(obj, proto) def test_protocol0_is_ascii_only(self): non_ascii_str = "\N{EMPTY SET}" self.assertRaises(pickle.PicklingError, self.dumps, non_ascii_str, 0) pickled = pickle.PERSID + non_ascii_str.encode('utf-8') + b'\n.' self.assertRaises(pickle.UnpicklingError, self.loads, pickled) class AbstractPicklerUnpicklerObjectTests: pickler_class = None unpickler_class = None def setUp(self): assert self.pickler_class assert self.unpickler_class def test_clear_pickler_memo(self): # To test whether clear_memo() has any effect, we pickle an object, # then pickle it again without clearing the memo; the two serialized # forms should be different. If we clear_memo() and then pickle the # object again, the third serialized form should be identical to the # first one we obtained. data = ["abcdefg", "abcdefg", 44] for proto in protocols: f = io.BytesIO() pickler = self.pickler_class(f, proto) pickler.dump(data) first_pickled = f.getvalue() # Reset BytesIO object. f.seek(0) f.truncate() pickler.dump(data) second_pickled = f.getvalue() # Reset the Pickler and BytesIO objects. pickler.clear_memo() f.seek(0) f.truncate() pickler.dump(data) third_pickled = f.getvalue() self.assertNotEqual(first_pickled, second_pickled) self.assertEqual(first_pickled, third_pickled) def test_priming_pickler_memo(self): # Verify that we can set the Pickler's memo attribute. data = ["abcdefg", "abcdefg", 44] f = io.BytesIO() pickler = self.pickler_class(f) pickler.dump(data) first_pickled = f.getvalue() f = io.BytesIO() primed = self.pickler_class(f) primed.memo = pickler.memo primed.dump(data) primed_pickled = f.getvalue() self.assertNotEqual(first_pickled, primed_pickled) def test_priming_unpickler_memo(self): # Verify that we can set the Unpickler's memo attribute. data = ["abcdefg", "abcdefg", 44] f = io.BytesIO() pickler = self.pickler_class(f) pickler.dump(data) first_pickled = f.getvalue() f = io.BytesIO() primed = self.pickler_class(f) primed.memo = pickler.memo primed.dump(data) primed_pickled = f.getvalue() unpickler = self.unpickler_class(io.BytesIO(first_pickled)) unpickled_data1 = unpickler.load() self.assertEqual(unpickled_data1, data) primed = self.unpickler_class(io.BytesIO(primed_pickled)) primed.memo = unpickler.memo unpickled_data2 = primed.load() primed.memo.clear() self.assertEqual(unpickled_data2, data) self.assertTrue(unpickled_data2 is unpickled_data1) def test_reusing_unpickler_objects(self): data1 = ["abcdefg", "abcdefg", 44] f = io.BytesIO() pickler = self.pickler_class(f) pickler.dump(data1) pickled1 = f.getvalue() data2 = ["abcdefg", 44, 44] f = io.BytesIO() pickler = self.pickler_class(f) pickler.dump(data2) pickled2 = f.getvalue() f = io.BytesIO() f.write(pickled1) f.seek(0) unpickler = self.unpickler_class(f) self.assertEqual(unpickler.load(), data1) f.seek(0) f.truncate() f.write(pickled2) f.seek(0) self.assertEqual(unpickler.load(), data2) def _check_multiple_unpicklings(self, ioclass, *, seekable=True): for proto in protocols: with self.subTest(proto=proto): data1 = [(x, str(x)) for x in range(2000)] + [b"abcde", len] f = ioclass() pickler = self.pickler_class(f, protocol=proto) pickler.dump(data1) pickled = f.getvalue() N = 5 f = ioclass(pickled * N) unpickler = self.unpickler_class(f) for i in range(N): if seekable: pos = f.tell() self.assertEqual(unpickler.load(), data1) if seekable: self.assertEqual(f.tell(), pos + len(pickled)) self.assertRaises(EOFError, unpickler.load) def test_multiple_unpicklings_seekable(self): self._check_multiple_unpicklings(io.BytesIO) def test_multiple_unpicklings_unseekable(self): self._check_multiple_unpicklings(UnseekableIO, seekable=False) def test_multiple_unpicklings_minimal(self): # File-like object that doesn't support peek() and readinto() # (bpo-39681) self._check_multiple_unpicklings(MinimalIO, seekable=False) def test_unpickling_buffering_readline(self): # Issue #12687: the unpickler's buffering logic could fail with # text mode opcodes. data = list(range(10)) for proto in protocols: for buf_size in range(1, 11): f = io.BufferedRandom(io.BytesIO(), buffer_size=buf_size) pickler = self.pickler_class(f, protocol=proto) pickler.dump(data) f.seek(0) unpickler = self.unpickler_class(f) self.assertEqual(unpickler.load(), data) def test_pickle_invalid_reducer_override(self): # gh-103035 obj = object() f = io.BytesIO() class MyPickler(self.pickler_class): pass pickler = MyPickler(f) pickler.dump(obj) pickler.clear_memo() pickler.reducer_override = None with self.assertRaises(TypeError): pickler.dump(obj) pickler.clear_memo() pickler.reducer_override = 10 with self.assertRaises(TypeError): pickler.dump(obj) # Tests for dispatch_table attribute REDUCE_A = 'reduce_A' class AAA(object): def __reduce__(self): return str, (REDUCE_A,) class BBB(object): def __init__(self): # Add an instance attribute to enable state-saving routines at pickling # time. self.a = "some attribute" def __setstate__(self, state): self.a = "BBB.__setstate__" def setstate_bbb(obj, state): """Custom state setter for BBB objects Such callable may be created by other persons than the ones who created the BBB class. If passed as the state_setter item of a custom reducer, this allows for custom state setting behavior of BBB objects. One can think of it as the analogous of list_setitems or dict_setitems but for foreign classes/functions. """ obj.a = "custom state_setter" class AbstractCustomPicklerClass: """Pickler implementing a reducing hook using reducer_override.""" def reducer_override(self, obj): obj_name = getattr(obj, "__name__", None) if obj_name == 'f': # asking the pickler to save f as 5 return int, (5, ) if obj_name == 'MyClass': return str, ('some str',) elif obj_name == 'g': # in this case, the callback returns an invalid result (not a 2-5 # tuple or a string), the pickler should raise a proper error. return False elif obj_name == 'h': # Simulate a case when the reducer fails. The error should # be propagated to the original ``dump`` call. raise ValueError('The reducer just failed') return NotImplemented class AbstractHookTests: def test_pickler_hook(self): # test the ability of a custom, user-defined CPickler subclass to # override the default reducing routines of any type using the method # reducer_override def f(): pass def g(): pass def h(): pass class MyClass: pass for proto in range(0, pickle.HIGHEST_PROTOCOL + 1): with self.subTest(proto=proto): bio = io.BytesIO() p = self.pickler_class(bio, proto) p.dump([f, MyClass, math.log]) new_f, some_str, math_log = pickle.loads(bio.getvalue()) self.assertEqual(new_f, 5) self.assertEqual(some_str, 'some str') # math.log does not have its usual reducer overridden, so the # custom reduction callback should silently direct the pickler # to the default pickling by attribute, by returning # NotImplemented self.assertIs(math_log, math.log) with self.assertRaises(pickle.PicklingError): p.dump(g) with self.assertRaisesRegex( ValueError, 'The reducer just failed'): p.dump(h) @support.cpython_only def test_reducer_override_no_reference_cycle(self): # bpo-39492: reducer_override used to induce a spurious reference cycle # inside the Pickler object, that could prevent all serialized objects # from being garbage-collected without explicitly invoking gc.collect. for proto in range(0, pickle.HIGHEST_PROTOCOL + 1): with self.subTest(proto=proto): def f(): pass wr = weakref.ref(f) bio = io.BytesIO() p = self.pickler_class(bio, proto) p.dump(f) new_f = pickle.loads(bio.getvalue()) assert new_f == 5 del p del f self.assertIsNone(wr()) class AbstractDispatchTableTests: def test_default_dispatch_table(self): # No dispatch_table attribute by default f = io.BytesIO() p = self.pickler_class(f, 0) with self.assertRaises(AttributeError): p.dispatch_table self.assertFalse(hasattr(p, 'dispatch_table')) def test_class_dispatch_table(self): # A dispatch_table attribute can be specified class-wide dt = self.get_dispatch_table() class MyPickler(self.pickler_class): dispatch_table = dt def dumps(obj, protocol=None): f = io.BytesIO() p = MyPickler(f, protocol) self.assertEqual(p.dispatch_table, dt) p.dump(obj) return f.getvalue() self._test_dispatch_table(dumps, dt) def test_instance_dispatch_table(self): # A dispatch_table attribute can also be specified instance-wide dt = self.get_dispatch_table() def dumps(obj, protocol=None): f = io.BytesIO() p = self.pickler_class(f, protocol) p.dispatch_table = dt self.assertEqual(p.dispatch_table, dt) p.dump(obj) return f.getvalue() self._test_dispatch_table(dumps, dt) def test_dispatch_table_None_item(self): # gh-93627 obj = object() f = io.BytesIO() pickler = self.pickler_class(f) pickler.dispatch_table = {type(obj): None} with self.assertRaises(TypeError): pickler.dump(obj) def _test_dispatch_table(self, dumps, dispatch_table): def custom_load_dump(obj): return pickle.loads(dumps(obj, 0)) def default_load_dump(obj): return pickle.loads(pickle.dumps(obj, 0)) # pickling complex numbers using protocol 0 relies on copyreg # so check pickling a complex number still works z = 1 + 2j self.assertEqual(custom_load_dump(z), z) self.assertEqual(default_load_dump(z), z) # modify pickling of complex REDUCE_1 = 'reduce_1' def reduce_1(obj): return str, (REDUCE_1,) dispatch_table[complex] = reduce_1 self.assertEqual(custom_load_dump(z), REDUCE_1) self.assertEqual(default_load_dump(z), z) # check picklability of AAA and BBB a = AAA() b = BBB() self.assertEqual(custom_load_dump(a), REDUCE_A) self.assertIsInstance(custom_load_dump(b), BBB) self.assertEqual(default_load_dump(a), REDUCE_A) self.assertIsInstance(default_load_dump(b), BBB) # modify pickling of BBB dispatch_table[BBB] = reduce_1 self.assertEqual(custom_load_dump(a), REDUCE_A) self.assertEqual(custom_load_dump(b), REDUCE_1) self.assertEqual(default_load_dump(a), REDUCE_A) self.assertIsInstance(default_load_dump(b), BBB) # revert pickling of BBB and modify pickling of AAA REDUCE_2 = 'reduce_2' def reduce_2(obj): return str, (REDUCE_2,) dispatch_table[AAA] = reduce_2 del dispatch_table[BBB] self.assertEqual(custom_load_dump(a), REDUCE_2) self.assertIsInstance(custom_load_dump(b), BBB) self.assertEqual(default_load_dump(a), REDUCE_A) self.assertIsInstance(default_load_dump(b), BBB) # End-to-end testing of save_reduce with the state_setter keyword # argument. This is a dispatch_table test as the primary goal of # state_setter is to tweak objects reduction behavior. # In particular, state_setter is useful when the default __setstate__ # behavior is not flexible enough. # No custom reducer for b has been registered for now, so # BBB.__setstate__ should be used at unpickling time self.assertEqual(default_load_dump(b).a, "BBB.__setstate__") def reduce_bbb(obj): return BBB, (), obj.__dict__, None, None, setstate_bbb dispatch_table[BBB] = reduce_bbb # The custom reducer reduce_bbb includes a state setter, that should # have priority over BBB.__setstate__ self.assertEqual(custom_load_dump(b).a, "custom state_setter") if __name__ == "__main__": # Print some stuff that can be used to rewrite DATA{0,1,2} from pickletools import dis x = create_data() for i in range(pickle.HIGHEST_PROTOCOL+1): p = pickle.dumps(x, i) print("DATA{0} = (".format(i)) for j in range(0, len(p), 20): b = bytes(p[j:j+20]) print(" {0!r}".format(b)) print(")") print() print("# Disassembly of DATA{0}".format(i)) print("DATA{0}_DIS = \"\"\"\\".format(i)) dis(p) print("\"\"\"") print()