/* List object implementation */ #include "Python.h" #ifdef STDC_HEADERS #include #else #include /* For size_t */ #endif static int roundupsize(int n) { unsigned int nbits = 0; unsigned int n2 = (unsigned int)n >> 5; /* Round up: * If n < 256, to a multiple of 8. * If n < 2048, to a multiple of 64. * If n < 16384, to a multiple of 512. * If n < 131072, to a multiple of 4096. * If n < 1048576, to a multiple of 32768. * If n < 8388608, to a multiple of 262144. * If n < 67108864, to a multiple of 2097152. * If n < 536870912, to a multiple of 16777216. * ... * If n < 2**(5+3*i), to a multiple of 2**(3*i). * * This over-allocates proportional to the list size, making room * for additional growth. The over-allocation is mild, but is * enough to give linear-time amortized behavior over a long * sequence of appends() in the presence of a poorly-performing * system realloc() (which is a reality, e.g., across all flavors * of Windows, with Win9x behavior being particularly bad -- and * we've still got address space fragmentation problems on Win9x * even with this scheme, although it requires much longer lists to * provoke them than it used to). */ do { n2 >>= 3; nbits += 3; } while (n2); return ((n >> nbits) + 1) << nbits; } #define NRESIZE(var, type, nitems) \ do { \ size_t _new_size = roundupsize(nitems); \ if (_new_size <= ((~(size_t)0) / sizeof(type))) \ PyMem_RESIZE(var, type, _new_size); \ else \ var = NULL; \ } while (0) PyObject * PyList_New(int size) { PyListObject *op; size_t nbytes; if (size < 0) { PyErr_BadInternalCall(); return NULL; } nbytes = size * sizeof(PyObject *); /* Check for overflow */ if (nbytes / sizeof(PyObject *) != (size_t)size) { return PyErr_NoMemory(); } op = PyObject_GC_New(PyListObject, &PyList_Type); if (op == NULL) { return NULL; } if (size <= 0) { op->ob_item = NULL; } else { op->ob_item = (PyObject **) PyMem_MALLOC(nbytes); if (op->ob_item == NULL) { return PyErr_NoMemory(); } memset(op->ob_item, 0, sizeof(*op->ob_item) * size); } op->ob_size = size; _PyObject_GC_TRACK(op); return (PyObject *) op; } int PyList_Size(PyObject *op) { if (!PyList_Check(op)) { PyErr_BadInternalCall(); return -1; } else return ((PyListObject *)op) -> ob_size; } static PyObject *indexerr; PyObject * PyList_GetItem(PyObject *op, int i) { if (!PyList_Check(op)) { PyErr_BadInternalCall(); return NULL; } if (i < 0 || i >= ((PyListObject *)op) -> ob_size) { if (indexerr == NULL) indexerr = PyString_FromString( "list index out of range"); PyErr_SetObject(PyExc_IndexError, indexerr); return NULL; } return ((PyListObject *)op) -> ob_item[i]; } int PyList_SetItem(register PyObject *op, register int i, register PyObject *newitem) { register PyObject *olditem; register PyObject **p; if (!PyList_Check(op)) { Py_XDECREF(newitem); PyErr_BadInternalCall(); return -1; } if (i < 0 || i >= ((PyListObject *)op) -> ob_size) { Py_XDECREF(newitem); PyErr_SetString(PyExc_IndexError, "list assignment index out of range"); return -1; } p = ((PyListObject *)op) -> ob_item + i; olditem = *p; *p = newitem; Py_XDECREF(olditem); return 0; } static int ins1(PyListObject *self, int where, PyObject *v) { int i; PyObject **items; if (v == NULL) { PyErr_BadInternalCall(); return -1; } if (self->ob_size == INT_MAX) { PyErr_SetString(PyExc_OverflowError, "cannot add more objects to list"); return -1; } items = self->ob_item; NRESIZE(items, PyObject *, self->ob_size+1); if (items == NULL) { PyErr_NoMemory(); return -1; } if (where < 0) where = 0; if (where > self->ob_size) where = self->ob_size; for (i = self->ob_size; --i >= where; ) items[i+1] = items[i]; Py_INCREF(v); items[where] = v; self->ob_item = items; self->ob_size++; return 0; } int PyList_Insert(PyObject *op, int where, PyObject *newitem) { if (!PyList_Check(op)) { PyErr_BadInternalCall(); return -1; } return ins1((PyListObject *)op, where, newitem); } int PyList_Append(PyObject *op, PyObject *newitem) { if (!PyList_Check(op)) { PyErr_BadInternalCall(); return -1; } return ins1((PyListObject *)op, (int) ((PyListObject *)op)->ob_size, newitem); } /* Methods */ static void list_dealloc(PyListObject *op) { int i; PyObject_GC_UnTrack(op); Py_TRASHCAN_SAFE_BEGIN(op) if (op->ob_item != NULL) { /* Do it backwards, for Christian Tismer. There's a simple test case where somehow this reduces thrashing when a *very* large list is created and immediately deleted. */ i = op->ob_size; while (--i >= 0) { Py_XDECREF(op->ob_item[i]); } PyMem_FREE(op->ob_item); } op->ob_type->tp_free((PyObject *)op); Py_TRASHCAN_SAFE_END(op) } static int list_print(PyListObject *op, FILE *fp, int flags) { int i; i = Py_ReprEnter((PyObject*)op); if (i != 0) { if (i < 0) return i; fprintf(fp, "[...]"); return 0; } fprintf(fp, "["); for (i = 0; i < op->ob_size; i++) { if (i > 0) fprintf(fp, ", "); if (PyObject_Print(op->ob_item[i], fp, 0) != 0) { Py_ReprLeave((PyObject *)op); return -1; } } fprintf(fp, "]"); Py_ReprLeave((PyObject *)op); return 0; } static PyObject * list_repr(PyListObject *v) { int i; PyObject *s, *temp; PyObject *pieces = NULL, *result = NULL; i = Py_ReprEnter((PyObject*)v); if (i != 0) { return i > 0 ? PyString_FromString("[...]") : NULL; } if (v->ob_size == 0) { result = PyString_FromString("[]"); goto Done; } pieces = PyList_New(0); if (pieces == NULL) goto Done; /* Do repr() on each element. Note that this may mutate the list, so must refetch the list size on each iteration. */ for (i = 0; i < v->ob_size; ++i) { int status; s = PyObject_Repr(v->ob_item[i]); if (s == NULL) goto Done; status = PyList_Append(pieces, s); Py_DECREF(s); /* append created a new ref */ if (status < 0) goto Done; } /* Add "[]" decorations to the first and last items. */ assert(PyList_GET_SIZE(pieces) > 0); s = PyString_FromString("["); if (s == NULL) goto Done; temp = PyList_GET_ITEM(pieces, 0); PyString_ConcatAndDel(&s, temp); PyList_SET_ITEM(pieces, 0, s); if (s == NULL) goto Done; s = PyString_FromString("]"); if (s == NULL) goto Done; temp = PyList_GET_ITEM(pieces, PyList_GET_SIZE(pieces) - 1); PyString_ConcatAndDel(&temp, s); PyList_SET_ITEM(pieces, PyList_GET_SIZE(pieces) - 1, temp); if (temp == NULL) goto Done; /* Paste them all together with ", " between. */ s = PyString_FromString(", "); if (s == NULL) goto Done; result = _PyString_Join(s, pieces); Py_DECREF(s); Done: Py_XDECREF(pieces); Py_ReprLeave((PyObject *)v); return result; } static int list_length(PyListObject *a) { return a->ob_size; } static int list_contains(PyListObject *a, PyObject *el) { int i; for (i = 0; i < a->ob_size; ++i) { int cmp = PyObject_RichCompareBool(el, PyList_GET_ITEM(a, i), Py_EQ); if (cmp > 0) return 1; else if (cmp < 0) return -1; } return 0; } static PyObject * list_item(PyListObject *a, int i) { if (i < 0 || i >= a->ob_size) { if (indexerr == NULL) indexerr = PyString_FromString( "list index out of range"); PyErr_SetObject(PyExc_IndexError, indexerr); return NULL; } Py_INCREF(a->ob_item[i]); return a->ob_item[i]; } static PyObject * list_slice(PyListObject *a, int ilow, int ihigh) { PyListObject *np; int i; if (ilow < 0) ilow = 0; else if (ilow > a->ob_size) ilow = a->ob_size; if (ihigh < ilow) ihigh = ilow; else if (ihigh > a->ob_size) ihigh = a->ob_size; np = (PyListObject *) PyList_New(ihigh - ilow); if (np == NULL) return NULL; for (i = ilow; i < ihigh; i++) { PyObject *v = a->ob_item[i]; Py_INCREF(v); np->ob_item[i - ilow] = v; } return (PyObject *)np; } PyObject * PyList_GetSlice(PyObject *a, int ilow, int ihigh) { if (!PyList_Check(a)) { PyErr_BadInternalCall(); return NULL; } return list_slice((PyListObject *)a, ilow, ihigh); } static PyObject * list_concat(PyListObject *a, PyObject *bb) { int size; int i; PyListObject *np; if (!PyList_Check(bb)) { PyErr_Format(PyExc_TypeError, "can only concatenate list (not \"%.200s\") to list", bb->ob_type->tp_name); return NULL; } #define b ((PyListObject *)bb) size = a->ob_size + b->ob_size; np = (PyListObject *) PyList_New(size); if (np == NULL) { return NULL; } for (i = 0; i < a->ob_size; i++) { PyObject *v = a->ob_item[i]; Py_INCREF(v); np->ob_item[i] = v; } for (i = 0; i < b->ob_size; i++) { PyObject *v = b->ob_item[i]; Py_INCREF(v); np->ob_item[i + a->ob_size] = v; } return (PyObject *)np; #undef b } static PyObject * list_repeat(PyListObject *a, int n) { int i, j; int size; PyListObject *np; PyObject **p; if (n < 0) n = 0; size = a->ob_size * n; np = (PyListObject *) PyList_New(size); if (np == NULL) return NULL; p = np->ob_item; for (i = 0; i < n; i++) { for (j = 0; j < a->ob_size; j++) { *p = a->ob_item[j]; Py_INCREF(*p); p++; } } return (PyObject *) np; } static int list_ass_slice(PyListObject *a, int ilow, int ihigh, PyObject *v) { /* Because [X]DECREF can recursively invoke list operations on this list, we must postpone all [X]DECREF activity until after the list is back in its canonical shape. Therefore we must allocate an additional array, 'recycle', into which we temporarily copy the items that are deleted from the list. :-( */ PyObject **recycle, **p; PyObject **item; int n; /* Size of replacement list */ int d; /* Change in size */ int k; /* Loop index */ #define b ((PyListObject *)v) if (v == NULL) n = 0; else if (PyList_Check(v)) { n = b->ob_size; if (a == b) { /* Special case "a[i:j] = a" -- copy b first */ int ret; v = list_slice(b, 0, n); ret = list_ass_slice(a, ilow, ihigh, v); Py_DECREF(v); return ret; } } else { PyErr_Format(PyExc_TypeError, "must assign list (not \"%.200s\") to slice", v->ob_type->tp_name); return -1; } if (ilow < 0) ilow = 0; else if (ilow > a->ob_size) ilow = a->ob_size; if (ihigh < ilow) ihigh = ilow; else if (ihigh > a->ob_size) ihigh = a->ob_size; item = a->ob_item; d = n - (ihigh-ilow); if (ihigh > ilow) p = recycle = PyMem_NEW(PyObject *, (ihigh-ilow)); else p = recycle = NULL; if (d <= 0) { /* Delete -d items; recycle ihigh-ilow items */ for (k = ilow; k < ihigh; k++) *p++ = item[k]; if (d < 0) { for (/*k = ihigh*/; k < a->ob_size; k++) item[k+d] = item[k]; a->ob_size += d; NRESIZE(item, PyObject *, a->ob_size); /* Can't fail */ a->ob_item = item; } } else { /* Insert d items; recycle ihigh-ilow items */ NRESIZE(item, PyObject *, a->ob_size + d); if (item == NULL) { if (recycle != NULL) PyMem_DEL(recycle); PyErr_NoMemory(); return -1; } for (k = a->ob_size; --k >= ihigh; ) item[k+d] = item[k]; for (/*k = ihigh-1*/; k >= ilow; --k) *p++ = item[k]; a->ob_item = item; a->ob_size += d; } for (k = 0; k < n; k++, ilow++) { PyObject *w = b->ob_item[k]; Py_XINCREF(w); item[ilow] = w; } if (recycle) { while (--p >= recycle) Py_XDECREF(*p); PyMem_DEL(recycle); } if (a->ob_size == 0 && a->ob_item != NULL) { PyMem_FREE(a->ob_item); a->ob_item = NULL; } return 0; #undef b } int PyList_SetSlice(PyObject *a, int ilow, int ihigh, PyObject *v) { if (!PyList_Check(a)) { PyErr_BadInternalCall(); return -1; } return list_ass_slice((PyListObject *)a, ilow, ihigh, v); } static PyObject * list_inplace_repeat(PyListObject *self, int n) { PyObject **items; int size, i, j; size = PyList_GET_SIZE(self); if (size == 0) { Py_INCREF(self); return (PyObject *)self; } items = self->ob_item; if (n < 1) { self->ob_item = NULL; self->ob_size = 0; for (i = 0; i < size; i++) Py_XDECREF(items[i]); PyMem_DEL(items); Py_INCREF(self); return (PyObject *)self; } NRESIZE(items, PyObject*, size*n); if (items == NULL) { PyErr_NoMemory(); goto finally; } self->ob_item = items; for (i = 1; i < n; i++) { /* Start counting at 1, not 0 */ for (j = 0; j < size; j++) { PyObject *o = PyList_GET_ITEM(self, j); Py_INCREF(o); PyList_SET_ITEM(self, self->ob_size++, o); } } Py_INCREF(self); return (PyObject *)self; finally: return NULL; } static int list_ass_item(PyListObject *a, int i, PyObject *v) { PyObject *old_value; if (i < 0 || i >= a->ob_size) { PyErr_SetString(PyExc_IndexError, "list assignment index out of range"); return -1; } if (v == NULL) return list_ass_slice(a, i, i+1, v); Py_INCREF(v); old_value = a->ob_item[i]; a->ob_item[i] = v; Py_DECREF(old_value); return 0; } static PyObject * ins(PyListObject *self, int where, PyObject *v) { if (ins1(self, where, v) != 0) return NULL; Py_INCREF(Py_None); return Py_None; } static PyObject * listinsert(PyListObject *self, PyObject *args) { int i; PyObject *v; if (!PyArg_ParseTuple(args, "iO:insert", &i, &v)) return NULL; return ins(self, i, v); } static PyObject * listappend(PyListObject *self, PyObject *v) { return ins(self, (int) self->ob_size, v); } static int listextend_internal(PyListObject *self, PyObject *b) { PyObject **items; int selflen = PyList_GET_SIZE(self); int blen; register int i; if (PyObject_Size(b) == 0) { /* short circuit when b is empty */ Py_DECREF(b); return 0; } if (self == (PyListObject*)b) { /* as in list_ass_slice() we must special case the * situation: a.extend(a) * * XXX: I think this way ought to be faster than using * list_slice() the way list_ass_slice() does. */ Py_DECREF(b); b = PyList_New(selflen); if (!b) return -1; for (i = 0; i < selflen; i++) { PyObject *o = PyList_GET_ITEM(self, i); Py_INCREF(o); PyList_SET_ITEM(b, i, o); } } blen = PyObject_Size(b); /* resize a using idiom */ items = self->ob_item; NRESIZE(items, PyObject*, selflen + blen); if (items == NULL) { PyErr_NoMemory(); Py_DECREF(b); return -1; } self->ob_item = items; /* populate the end of self with b's items */ for (i = 0; i < blen; i++) { PyObject *o = PySequence_Fast_GET_ITEM(b, i); Py_INCREF(o); PyList_SET_ITEM(self, self->ob_size++, o); } Py_DECREF(b); return 0; } static PyObject * list_inplace_concat(PyListObject *self, PyObject *other) { other = PySequence_Fast(other, "argument to += must be iterable"); if (!other) return NULL; if (listextend_internal(self, other) < 0) return NULL; Py_INCREF(self); return (PyObject *)self; } static PyObject * listextend(PyListObject *self, PyObject *b) { b = PySequence_Fast(b, "list.extend() argument must be iterable"); if (!b) return NULL; if (listextend_internal(self, b) < 0) return NULL; Py_INCREF(Py_None); return Py_None; } static PyObject * listpop(PyListObject *self, PyObject *args) { int i = -1; PyObject *v; if (!PyArg_ParseTuple(args, "|i:pop", &i)) return NULL; if (self->ob_size == 0) { /* Special-case most common failure cause */ PyErr_SetString(PyExc_IndexError, "pop from empty list"); return NULL; } if (i < 0) i += self->ob_size; if (i < 0 || i >= self->ob_size) { PyErr_SetString(PyExc_IndexError, "pop index out of range"); return NULL; } v = self->ob_item[i]; Py_INCREF(v); if (list_ass_slice(self, i, i+1, (PyObject *)NULL) != 0) { Py_DECREF(v); return NULL; } return v; } /* New quicksort implementation for arrays of object pointers. Thanks to discussions with Tim Peters. */ /* CMPERROR is returned by our comparison function when an error occurred. This is the largest negative integer (0x80000000 on a 32-bit system). */ #define CMPERROR ( (int) ((unsigned int)1 << (8*sizeof(int) - 1)) ) /* Comparison function. Takes care of calling a user-supplied comparison function (any callable Python object). Calls the standard comparison function, PyObject_Compare(), if the user- supplied function is NULL. */ static int docompare(PyObject *x, PyObject *y, PyObject *compare) { PyObject *args, *res; int i; if (compare == NULL) { /* NOTE: we rely on the fact here that the sorting algorithm only ever checks whether k<0, i.e., whether x 0) return 1; return 0; } /* MINSIZE is the smallest array that will get a full-blown samplesort treatment; smaller arrays are sorted using binary insertion. It must be at least 7 for the samplesort implementation to work. Binary insertion does fewer compares, but can suffer O(N**2) data movement. The more expensive compares, the larger MINSIZE should be. */ #define MINSIZE 100 /* MINPARTITIONSIZE is the smallest array slice samplesort will bother to partition; smaller slices are passed to binarysort. It must be at least 2, and no larger than MINSIZE. Setting it higher reduces the # of compares slowly, but increases the amount of data movement quickly. The value here was chosen assuming a compare costs ~25x more than swapping a pair of memory-resident pointers -- but under that assumption, changing the value by a few dozen more or less has aggregate effect under 1%. So the value is crucial, but not touchy . */ #define MINPARTITIONSIZE 40 /* MAXMERGE is the largest number of elements we'll always merge into a known-to-be sorted chunk via binary insertion, regardless of the size of that chunk. Given a chunk of N sorted elements, and a group of K unknowns, the largest K for which it's better to do insertion (than a full-blown sort) is a complicated function of N and K mostly involving the expected number of compares and data moves under each approach, and the relative cost of those operations on a specific architecure. The fixed value here is conservative, and should be a clear win regardless of architecture or N. */ #define MAXMERGE 15 /* STACKSIZE is the size of our work stack. A rough estimate is that this allows us to sort arrays of size N where N / ln(N) = MINPARTITIONSIZE * 2**STACKSIZE, so 60 is more than enough for arrays of size 2**64. Because we push the biggest partition first, the worst case occurs when all subarrays are always partitioned exactly in two. */ #define STACKSIZE 60 #define SETK(X,Y) if ((k = docompare(X,Y,compare))==CMPERROR) goto fail /* binarysort is the best method for sorting small arrays: it does few compares, but can do data movement quadratic in the number of elements. [lo, hi) is a contiguous slice of a list, and is sorted via binary insertion. On entry, must have lo <= start <= hi, and that [lo, start) is already sorted (pass start == lo if you don't know!). If docompare complains (returns CMPERROR) return -1, else 0. Even in case of error, the output slice will be some permutation of the input (nothing is lost or duplicated). */ static int binarysort(PyObject **lo, PyObject **hi, PyObject **start, PyObject *compare) /* compare -- comparison function object, or NULL for default */ { /* assert lo <= start <= hi assert [lo, start) is sorted */ register int k; register PyObject **l, **p, **r; register PyObject *pivot; if (lo == start) ++start; for (; start < hi; ++start) { /* set l to where *start belongs */ l = lo; r = start; pivot = *r; do { p = l + ((r - l) >> 1); SETK(pivot, *p); if (k < 0) r = p; else l = p + 1; } while (l < r); /* Pivot should go at l -- slide over to make room. Caution: using memmove is much slower under MSVC 5; we're not usually moving many slots. */ for (p = start; p > l; --p) *p = *(p-1); *l = pivot; } return 0; fail: return -1; } /* samplesortslice is the sorting workhorse. [lo, hi) is a contiguous slice of a list, to be sorted in place. On entry, must have lo <= hi, If docompare complains (returns CMPERROR) return -1, else 0. Even in case of error, the output slice will be some permutation of the input (nothing is lost or duplicated). samplesort is basically quicksort on steroids: a power of 2 close to n/ln(n) is computed, and that many elements (less 1) are picked at random from the array and sorted. These 2**k - 1 elements are then used as preselected pivots for an equal number of quicksort partitioning steps, partitioning the slice into 2**k chunks each of size about ln(n). These small final chunks are then usually handled by binarysort. Note that when k=1, this is roughly the same as an ordinary quicksort using a random pivot, and when k=2 this is roughly a median-of-3 quicksort. From that view, using k ~= lg(n/ln(n)) makes this a "median of n/ln(n)" quicksort. You can also view it as a kind of bucket sort, where 2**k-1 bucket boundaries are picked dynamically. The large number of samples makes a quadratic-time case almost impossible, and asymptotically drives the average-case number of compares from quicksort's 2 N ln N (or 12/7 N ln N for the median-of- 3 variant) down to N lg N. We also play lots of low-level tricks to cut the number of compares. Very obscure: To avoid using extra memory, the PPs are stored in the array and shuffled around as partitioning proceeds. At the start of a partitioning step, we'll have 2**m-1 (for some m) PPs in sorted order, adjacent (either on the left or the right!) to a chunk of X elements that are to be partitioned: P X or X P. In either case we need to shuffle things *in place* so that the 2**(m-1) smaller PPs are on the left, followed by the PP to be used for this step (that's the middle of the PPs), followed by X, followed by the 2**(m-1) larger PPs: P X or X P -> Psmall pivot X Plarge and the order of the PPs must not be altered. It can take a while to realize this isn't trivial! It can take even longer to understand why the simple code below works, using only 2**(m-1) swaps. The key is that the order of the X elements isn't necessarily preserved: X can end up as some cyclic permutation of its original order. That's OK, because X is unsorted anyway. If the order of X had to be preserved too, the simplest method I know of using O(1) scratch storage requires len(X) + 2**(m-1) swaps, spread over 2 passes. Since len(X) is typically several times larger than 2**(m-1), that would slow things down. */ struct SamplesortStackNode { /* Represents a slice of the array, from (& including) lo up to (but excluding) hi. "extra" additional & adjacent elements are pre-selected pivots (PPs), spanning [lo-extra, lo) if extra > 0, or [hi, hi-extra) if extra < 0. The PPs are already sorted, but nothing is known about the other elements in [lo, hi). |extra| is always one less than a power of 2. When extra is 0, we're out of PPs, and the slice must be sorted by some other means. */ PyObject **lo; PyObject **hi; int extra; }; /* The number of PPs we want is 2**k - 1, where 2**k is as close to N / ln(N) as possible. So k ~= lg(N / ln(N)). Calling libm routines is undesirable, so cutoff values are canned in the "cutoff" table below: cutoff[i] is the smallest N such that k == CUTOFFBASE + i. */ #define CUTOFFBASE 4 static long cutoff[] = { 43, /* smallest N such that k == 4 */ 106, /* etc */ 250, 576, 1298, 2885, 6339, 13805, 29843, 64116, 137030, 291554, 617916, 1305130, 2748295, 5771662, 12091672, 25276798, 52734615, 109820537, 228324027, 473977813, 982548444, /* smallest N such that k == 26 */ 2034159050 /* largest N that fits in signed 32-bit; k == 27 */ }; static int samplesortslice(PyObject **lo, PyObject **hi, PyObject *compare) /* compare -- comparison function object, or NULL for default */ { register PyObject **l, **r; register PyObject *tmp, *pivot; register int k; int n, extra, top, extraOnRight; struct SamplesortStackNode stack[STACKSIZE]; /* assert lo <= hi */ n = hi - lo; /* ---------------------------------------------------------- * Special cases * --------------------------------------------------------*/ if (n < 2) return 0; /* Set r to the largest value such that [lo,r) is sorted. This catches the already-sorted case, the all-the-same case, and the appended-a-few-elements-to-a-sorted-list case. If the array is unsorted, we're very likely to get out of the loop fast, so the test is cheap if it doesn't pay off. */ /* assert lo < hi */ for (r = lo+1; r < hi; ++r) { SETK(*r, *(r-1)); if (k < 0) break; } /* [lo,r) is sorted, [r,hi) unknown. Get out cheap if there are few unknowns, or few elements in total. */ if (hi - r <= MAXMERGE || n < MINSIZE) return binarysort(lo, hi, r, compare); /* Check for the array already being reverse-sorted. Typical benchmark-driven silliness . */ /* assert lo < hi */ for (r = lo+1; r < hi; ++r) { SETK(*(r-1), *r); if (k < 0) break; } if (hi - r <= MAXMERGE) { /* Reverse the reversed prefix, then insert the tail */ PyObject **originalr = r; l = lo; do { --r; tmp = *l; *l = *r; *r = tmp; ++l; } while (l < r); return binarysort(lo, hi, originalr, compare); } /* ---------------------------------------------------------- * Normal case setup: a large array without obvious pattern. * --------------------------------------------------------*/ /* extra := a power of 2 ~= n/ln(n), less 1. First find the smallest extra s.t. n < cutoff[extra] */ for (extra = 0; extra < sizeof(cutoff) / sizeof(cutoff[0]); ++extra) { if (n < cutoff[extra]) break; /* note that if we fall out of the loop, the value of extra still makes *sense*, but may be smaller than we would like (but the array has more than ~= 2**31 elements in this case!) */ } /* Now k == extra - 1 + CUTOFFBASE. The smallest value k can have is CUTOFFBASE-1, so assert MINSIZE >= 2**(CUTOFFBASE-1) - 1 */ extra = (1 << (extra - 1 + CUTOFFBASE)) - 1; /* assert extra > 0 and n >= extra */ /* Swap that many values to the start of the array. The selection of elements is pseudo-random, but the same on every run (this is intentional! timing algorithm changes is a pain if timing varies across runs). */ { unsigned int seed = n / extra; /* arbitrary */ unsigned int i; for (i = 0; i < (unsigned)extra; ++i) { /* j := random int in [i, n) */ unsigned int j; seed = seed * 69069 + 7; j = i + seed % (n - i); tmp = lo[i]; lo[i] = lo[j]; lo[j] = tmp; } } /* Recursively sort the preselected pivots. */ if (samplesortslice(lo, lo + extra, compare) < 0) goto fail; top = 0; /* index of available stack slot */ lo += extra; /* point to first unknown */ extraOnRight = 0; /* the PPs are at the left end */ /* ---------------------------------------------------------- * Partition [lo, hi), and repeat until out of work. * --------------------------------------------------------*/ for (;;) { /* assert lo <= hi, so n >= 0 */ n = hi - lo; /* We may not want, or may not be able, to partition: If n is small, it's quicker to insert. If extra is 0, we're out of pivots, and *must* use another method. */ if (n < MINPARTITIONSIZE || extra == 0) { if (n >= MINSIZE) { /* assert extra == 0 This is rare, since the average size of a final block is only about ln(original n). */ if (samplesortslice(lo, hi, compare) < 0) goto fail; } else { /* Binary insertion should be quicker, and we can take advantage of the PPs already being sorted. */ if (extraOnRight && extra) { /* swap the PPs to the left end */ k = extra; do { tmp = *lo; *lo = *hi; *hi = tmp; ++lo; ++hi; } while (--k); } if (binarysort(lo - extra, hi, lo, compare) < 0) goto fail; } /* Find another slice to work on. */ if (--top < 0) break; /* no more -- done! */ lo = stack[top].lo; hi = stack[top].hi; extra = stack[top].extra; extraOnRight = 0; if (extra < 0) { extraOnRight = 1; extra = -extra; } continue; } /* Pretend the PPs are indexed 0, 1, ..., extra-1. Then our preselected pivot is at (extra-1)/2, and we want to move the PPs before that to the left end of the slice, and the PPs after that to the right end. The following section changes extra, lo, hi, and the slice such that: [lo-extra, lo) contains the smaller PPs. *lo == our PP. (lo, hi) contains the unknown elements. [hi, hi+extra) contains the larger PPs. */ k = extra >>= 1; /* num PPs to move */ if (extraOnRight) { /* Swap the smaller PPs to the left end. Note that this loop actually moves k+1 items: the last is our PP */ do { tmp = *lo; *lo = *hi; *hi = tmp; ++lo; ++hi; } while (k--); } else { /* Swap the larger PPs to the right end. */ while (k--) { --lo; --hi; tmp = *lo; *lo = *hi; *hi = tmp; } } --lo; /* *lo is now our PP */ pivot = *lo; /* Now an almost-ordinary quicksort partition step. Note that most of the time is spent here! Only odd thing is that we partition into < and >=, instead of the usual <= and >=. This helps when there are lots of duplicates of different values, because it eventually tends to make subfiles "pure" (all duplicates), and we special-case for duplicates later. */ l = lo + 1; r = hi - 1; /* assert lo < l < r < hi (small n weeded out above) */ do { /* slide l right, looking for key >= pivot */ do { SETK(*l, pivot); if (k < 0) ++l; else break; } while (l < r); /* slide r left, looking for key < pivot */ while (l < r) { register PyObject *rval = *r--; SETK(rval, pivot); if (k < 0) { /* swap and advance */ r[1] = *l; *l++ = rval; break; } } } while (l < r); /* assert lo < r <= l < hi assert r == l or r+1 == l everything to the left of l is < pivot, and everything to the right of r is >= pivot */ if (l == r) { SETK(*r, pivot); if (k < 0) ++l; else --r; } /* assert lo <= r and r+1 == l and l <= hi assert r == lo or a[r] < pivot assert a[lo] is pivot assert l == hi or a[l] >= pivot Swap the pivot into "the middle", so we can henceforth ignore it. */ *lo = *r; *r = pivot; /* The following is true now, & will be preserved: All in [lo,r) are < pivot All in [r,l) == pivot (& so can be ignored) All in [l,hi) are >= pivot */ /* Check for duplicates of the pivot. One compare is wasted if there are no duplicates, but can win big when there are. Tricky: we're sticking to "<" compares, so deduce equality indirectly. We know pivot <= *l, so they're equal iff not pivot < *l. */ while (l < hi) { /* pivot <= *l known */ SETK(pivot, *l); if (k < 0) break; else /* <= and not < implies == */ ++l; } /* assert lo <= r < l <= hi Partitions are [lo, r) and [l, hi) */ /* push fattest first; remember we still have extra PPs to the left of the left chunk and to the right of the right chunk! */ /* assert top < STACKSIZE */ if (r - lo <= hi - l) { /* second is bigger */ stack[top].lo = l; stack[top].hi = hi; stack[top].extra = -extra; hi = r; extraOnRight = 0; } else { /* first is bigger */ stack[top].lo = lo; stack[top].hi = r; stack[top].extra = extra; lo = l; extraOnRight = 1; } ++top; } /* end of partitioning loop */ return 0; fail: return -1; } #undef SETK staticforward PyTypeObject immutable_list_type; static PyObject * listsort(PyListObject *self, PyObject *args) { int err; PyObject *compare = NULL; PyTypeObject *savetype; if (args != NULL) { if (!PyArg_ParseTuple(args, "|O:sort", &compare)) return NULL; } savetype = self->ob_type; self->ob_type = &immutable_list_type; err = samplesortslice(self->ob_item, self->ob_item + self->ob_size, compare); self->ob_type = savetype; if (err < 0) return NULL; Py_INCREF(Py_None); return Py_None; } int PyList_Sort(PyObject *v) { if (v == NULL || !PyList_Check(v)) { PyErr_BadInternalCall(); return -1; } v = listsort((PyListObject *)v, (PyObject *)NULL); if (v == NULL) return -1; Py_DECREF(v); return 0; } static void _listreverse(PyListObject *self) { register PyObject **p, **q; register PyObject *tmp; if (self->ob_size > 1) { for (p = self->ob_item, q = self->ob_item + self->ob_size - 1; p < q; p++, q--) { tmp = *p; *p = *q; *q = tmp; } } } static PyObject * listreverse(PyListObject *self) { _listreverse(self); Py_INCREF(Py_None); return Py_None; } int PyList_Reverse(PyObject *v) { if (v == NULL || !PyList_Check(v)) { PyErr_BadInternalCall(); return -1; } _listreverse((PyListObject *)v); return 0; } PyObject * PyList_AsTuple(PyObject *v) { PyObject *w; PyObject **p; int n; if (v == NULL || !PyList_Check(v)) { PyErr_BadInternalCall(); return NULL; } n = ((PyListObject *)v)->ob_size; w = PyTuple_New(n); if (w == NULL) return NULL; p = ((PyTupleObject *)w)->ob_item; memcpy((void *)p, (void *)((PyListObject *)v)->ob_item, n*sizeof(PyObject *)); while (--n >= 0) { Py_INCREF(*p); p++; } return w; } static PyObject * listindex(PyListObject *self, PyObject *v) { int i; for (i = 0; i < self->ob_size; i++) { int cmp = PyObject_RichCompareBool(self->ob_item[i], v, Py_EQ); if (cmp > 0) return PyInt_FromLong((long)i); else if (cmp < 0) return NULL; } PyErr_SetString(PyExc_ValueError, "list.index(x): x not in list"); return NULL; } static PyObject * listcount(PyListObject *self, PyObject *v) { int count = 0; int i; for (i = 0; i < self->ob_size; i++) { int cmp = PyObject_RichCompareBool(self->ob_item[i], v, Py_EQ); if (cmp > 0) count++; else if (cmp < 0) return NULL; } return PyInt_FromLong((long)count); } static PyObject * listremove(PyListObject *self, PyObject *v) { int i; for (i = 0; i < self->ob_size; i++) { int cmp = PyObject_RichCompareBool(self->ob_item[i], v, Py_EQ); if (cmp > 0) { if (list_ass_slice(self, i, i+1, (PyObject *)NULL) != 0) return NULL; Py_INCREF(Py_None); return Py_None; } else if (cmp < 0) return NULL; } PyErr_SetString(PyExc_ValueError, "list.remove(x): x not in list"); return NULL; } static int list_traverse(PyListObject *o, visitproc visit, void *arg) { int i, err; PyObject *x; for (i = o->ob_size; --i >= 0; ) { x = o->ob_item[i]; if (x != NULL) { err = visit(x, arg); if (err) return err; } } return 0; } static int list_clear(PyListObject *lp) { (void) PyList_SetSlice((PyObject *)lp, 0, lp->ob_size, 0); return 0; } static PyObject * list_richcompare(PyObject *v, PyObject *w, int op) { PyListObject *vl, *wl; int i; if (!PyList_Check(v) || !PyList_Check(w)) { Py_INCREF(Py_NotImplemented); return Py_NotImplemented; } vl = (PyListObject *)v; wl = (PyListObject *)w; if (vl->ob_size != wl->ob_size && (op == Py_EQ || op == Py_NE)) { /* Shortcut: if the lengths differ, the lists differ */ PyObject *res; if (op == Py_EQ) res = Py_False; else res = Py_True; Py_INCREF(res); return res; } /* Search for the first index where items are different */ for (i = 0; i < vl->ob_size && i < wl->ob_size; i++) { int k = PyObject_RichCompareBool(vl->ob_item[i], wl->ob_item[i], Py_EQ); if (k < 0) return NULL; if (!k) break; } if (i >= vl->ob_size || i >= wl->ob_size) { /* No more items to compare -- compare sizes */ int vs = vl->ob_size; int ws = wl->ob_size; int cmp; PyObject *res; switch (op) { case Py_LT: cmp = vs < ws; break; case Py_LE: cmp = vs <= ws; break; case Py_EQ: cmp = vs == ws; break; case Py_NE: cmp = vs != ws; break; case Py_GT: cmp = vs > ws; break; case Py_GE: cmp = vs >= ws; break; default: return NULL; /* cannot happen */ } if (cmp) res = Py_True; else res = Py_False; Py_INCREF(res); return res; } /* We have an item that differs -- shortcuts for EQ/NE */ if (op == Py_EQ) { Py_INCREF(Py_False); return Py_False; } if (op == Py_NE) { Py_INCREF(Py_True); return Py_True; } /* Compare the final item again using the proper operator */ return PyObject_RichCompare(vl->ob_item[i], wl->ob_item[i], op); } /* Adapted from newer code by Tim */ static int list_fill(PyListObject *result, PyObject *v) { PyObject *it; /* iter(v) */ int n; /* guess for result list size */ int i; n = result->ob_size; /* Special-case list(a_list), for speed. */ if (PyList_Check(v)) { if (v == (PyObject *)result) return 0; /* source is destination, we're done */ return list_ass_slice(result, 0, n, v); } /* Empty previous contents */ if (n != 0) { if (list_ass_slice(result, 0, n, (PyObject *)NULL) != 0) return -1; } /* Get iterator. There may be some low-level efficiency to be gained * by caching the tp_iternext slot instead of using PyIter_Next() * later, but premature optimization is the root etc. */ it = PyObject_GetIter(v); if (it == NULL) return -1; /* Guess a result list size. */ n = -1; /* unknown */ if (PySequence_Check(v) && v->ob_type->tp_as_sequence->sq_length) { n = PySequence_Size(v); if (n < 0) PyErr_Clear(); } if (n < 0) n = 8; /* arbitrary */ NRESIZE(result->ob_item, PyObject*, n); if (result->ob_item == NULL) { PyErr_NoMemory(); goto error; } memset(result->ob_item, 0, sizeof(*result->ob_item) * n); result->ob_size = n; /* Run iterator to exhaustion. */ for (i = 0; ; i++) { PyObject *item = PyIter_Next(it); if (item == NULL) { if (PyErr_Occurred()) goto error; break; } if (i < n) PyList_SET_ITEM(result, i, item); /* steals ref */ else { int status = ins1(result, result->ob_size, item); Py_DECREF(item); /* append creates a new ref */ if (status < 0) goto error; } } /* Cut back result list if initial guess was too large. */ if (i < n && result != NULL) { if (list_ass_slice(result, i, n, (PyObject *)NULL) != 0) goto error; } Py_DECREF(it); return 0; error: Py_DECREF(it); return -1; } static int list_init(PyListObject *self, PyObject *args, PyObject *kw) { PyObject *arg = NULL; static char *kwlist[] = {"sequence", 0}; if (!PyArg_ParseTupleAndKeywords(args, kw, "|O:list", kwlist, &arg)) return -1; if (arg != NULL) return list_fill(self, arg); if (self->ob_size > 0) return list_ass_slice(self, 0, self->ob_size, (PyObject*)NULL); return 0; } static long list_nohash(PyObject *self) { PyErr_SetString(PyExc_TypeError, "list objects are unhashable"); return -1; } PyDoc_STRVAR(append_doc, "L.append(object) -- append object to end"); PyDoc_STRVAR(extend_doc, "L.extend(list) -- extend list by appending list elements"); PyDoc_STRVAR(insert_doc, "L.insert(index, object) -- insert object before index"); PyDoc_STRVAR(pop_doc, "L.pop([index]) -> item -- remove and return item at index (default last)"); PyDoc_STRVAR(remove_doc, "L.remove(value) -- remove first occurrence of value"); PyDoc_STRVAR(index_doc, "L.index(value) -> integer -- return index of first occurrence of value"); PyDoc_STRVAR(count_doc, "L.count(value) -> integer -- return number of occurrences of value"); PyDoc_STRVAR(reverse_doc, "L.reverse() -- reverse *IN PLACE*"); PyDoc_STRVAR(sort_doc, "L.sort([cmpfunc]) -- sort *IN PLACE*; if given, cmpfunc(x, y) -> -1, 0, 1"); static PyMethodDef list_methods[] = { {"append", (PyCFunction)listappend, METH_O, append_doc}, {"insert", (PyCFunction)listinsert, METH_VARARGS, insert_doc}, {"extend", (PyCFunction)listextend, METH_O, extend_doc}, {"pop", (PyCFunction)listpop, METH_VARARGS, pop_doc}, {"remove", (PyCFunction)listremove, METH_O, remove_doc}, {"index", (PyCFunction)listindex, METH_O, index_doc}, {"count", (PyCFunction)listcount, METH_O, count_doc}, {"reverse", (PyCFunction)listreverse, METH_NOARGS, reverse_doc}, {"sort", (PyCFunction)listsort, METH_VARARGS, sort_doc}, {NULL, NULL} /* sentinel */ }; static PySequenceMethods list_as_sequence = { (inquiry)list_length, /* sq_length */ (binaryfunc)list_concat, /* sq_concat */ (intargfunc)list_repeat, /* sq_repeat */ (intargfunc)list_item, /* sq_item */ (intintargfunc)list_slice, /* sq_slice */ (intobjargproc)list_ass_item, /* sq_ass_item */ (intintobjargproc)list_ass_slice, /* sq_ass_slice */ (objobjproc)list_contains, /* sq_contains */ (binaryfunc)list_inplace_concat, /* sq_inplace_concat */ (intargfunc)list_inplace_repeat, /* sq_inplace_repeat */ }; PyDoc_STRVAR(list_doc, "list() -> new list\n" "list(sequence) -> new list initialized from sequence's items"); staticforward PyObject * list_iter(PyObject *seq); static PyObject* list_subscript(PyListObject* self, PyObject* item) { if (PyInt_Check(item)) { long i = PyInt_AS_LONG(item); if (i < 0) i += PyList_GET_SIZE(self); return list_item(self, i); } else if (PyLong_Check(item)) { long i = PyLong_AsLong(item); if (i == -1 && PyErr_Occurred()) return NULL; if (i < 0) i += PyList_GET_SIZE(self); return list_item(self, i); } else if (PySlice_Check(item)) { int start, stop, step, slicelength, cur, i; PyObject* result; PyObject* it; if (PySlice_GetIndicesEx((PySliceObject*)item, self->ob_size, &start, &stop, &step, &slicelength) < 0) { return NULL; } if (slicelength <= 0) { return PyList_New(0); } else { result = PyList_New(slicelength); if (!result) return NULL; for (cur = start, i = 0; i < slicelength; cur += step, i++) { it = PyList_GET_ITEM(self, cur); Py_INCREF(it); PyList_SET_ITEM(result, i, it); } return result; } } else { PyErr_SetString(PyExc_TypeError, "list indices must be integers"); return NULL; } } static int list_ass_subscript(PyListObject* self, PyObject* item, PyObject* value) { if (PyInt_Check(item)) { long i = PyInt_AS_LONG(item); if (i < 0) i += PyList_GET_SIZE(self); return list_ass_item(self, i, value); } else if (PyLong_Check(item)) { long i = PyLong_AsLong(item); if (i == -1 && PyErr_Occurred()) return -1; if (i < 0) i += PyList_GET_SIZE(self); return list_ass_item(self, i, value); } else if (PySlice_Check(item)) { int start, stop, step, slicelength; if (PySlice_GetIndicesEx((PySliceObject*)item, self->ob_size, &start, &stop, &step, &slicelength) < 0) { return -1; } /* treat L[slice(a,b)] = v _exactly_ like L[a:b] = v */ if (step == 1 && ((PySliceObject*)item)->step == Py_None) return list_ass_slice(self, start, stop, value); if (value == NULL) { /* delete slice */ PyObject **garbage, **it; int cur, i, j; if (slicelength <= 0) return 0; if (step < 0) { stop = start + 1; start = stop + step*(slicelength - 1) - 1; step = -step; } garbage = (PyObject**) PyMem_MALLOC(slicelength*sizeof(PyObject*)); /* drawing pictures might help understand these for loops */ for (cur = start, i = 0; cur < stop; cur += step, i++) { garbage[i] = PyList_GET_ITEM(self, cur); for (j = 0; j < step; j++) { PyList_SET_ITEM(self, cur + j - i, PyList_GET_ITEM(self, cur + j + 1)); } } for (cur = start + slicelength*step + 1; cur < self->ob_size; cur++) { PyList_SET_ITEM(self, cur - slicelength, PyList_GET_ITEM(self, cur)); } self->ob_size -= slicelength; it = self->ob_item; NRESIZE(it, PyObject*, self->ob_size); self->ob_item = it; for (i = 0; i < slicelength; i++) { Py_DECREF(garbage[i]); } PyMem_FREE(garbage); return 0; } else { /* assign slice */ PyObject **garbage, *ins; int cur, i; if (!PyList_Check(value)) { PyErr_Format(PyExc_TypeError, "must assign list (not \"%.200s\") to slice", value->ob_type->tp_name); return -1; } if (PyList_GET_SIZE(value) != slicelength) { PyErr_Format(PyExc_ValueError, "attempt to assign list of size %d to extended slice of size %d", PyList_Size(value), slicelength); return -1; } if (!slicelength) return 0; /* protect against a[::-1] = a */ if (self == (PyListObject*)value) { value = list_slice((PyListObject*)value, 0, PyList_GET_SIZE(value)); } else { Py_INCREF(value); } garbage = (PyObject**) PyMem_MALLOC(slicelength*sizeof(PyObject*)); for (cur = start, i = 0; i < slicelength; cur += step, i++) { garbage[i] = PyList_GET_ITEM(self, cur); ins = PyList_GET_ITEM(value, i); Py_INCREF(ins); PyList_SET_ITEM(self, cur, ins); } for (i = 0; i < slicelength; i++) { Py_DECREF(garbage[i]); } PyMem_FREE(garbage); Py_DECREF(value); return 0; } } else { PyErr_SetString(PyExc_TypeError, "list indices must be integers"); return -1; } } static PyMappingMethods list_as_mapping = { (inquiry)list_length, (binaryfunc)list_subscript, (objobjargproc)list_ass_subscript }; PyTypeObject PyList_Type = { PyObject_HEAD_INIT(&PyType_Type) 0, "list", sizeof(PyListObject), 0, (destructor)list_dealloc, /* tp_dealloc */ (printfunc)list_print, /* tp_print */ 0, /* tp_getattr */ 0, /* tp_setattr */ 0, /* tp_compare */ (reprfunc)list_repr, /* tp_repr */ 0, /* tp_as_number */ &list_as_sequence, /* tp_as_sequence */ &list_as_mapping, /* tp_as_mapping */ list_nohash, /* tp_hash */ 0, /* tp_call */ 0, /* tp_str */ PyObject_GenericGetAttr, /* tp_getattro */ 0, /* tp_setattro */ 0, /* tp_as_buffer */ Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC | Py_TPFLAGS_BASETYPE, /* tp_flags */ list_doc, /* tp_doc */ (traverseproc)list_traverse, /* tp_traverse */ (inquiry)list_clear, /* tp_clear */ list_richcompare, /* tp_richcompare */ 0, /* tp_weaklistoffset */ list_iter, /* tp_iter */ 0, /* tp_iternext */ list_methods, /* tp_methods */ 0, /* tp_members */ 0, /* tp_getset */ 0, /* tp_base */ 0, /* tp_dict */ 0, /* tp_descr_get */ 0, /* tp_descr_set */ 0, /* tp_dictoffset */ (initproc)list_init, /* tp_init */ PyType_GenericAlloc, /* tp_alloc */ PyType_GenericNew, /* tp_new */ PyObject_GC_Del, /* tp_free */ }; /* During a sort, we really can't have anyone modifying the list; it could cause core dumps. Thus, we substitute a dummy type that raises an explanatory exception when a modifying operation is used. Caveat: comparisons may behave differently; but I guess it's a bad idea anyway to compare a list that's being sorted... */ static PyObject * immutable_list_op(void) { PyErr_SetString(PyExc_TypeError, "a list cannot be modified while it is being sorted"); return NULL; } static PyMethodDef immutable_list_methods[] = { {"append", (PyCFunction)immutable_list_op, METH_VARARGS}, {"insert", (PyCFunction)immutable_list_op, METH_VARARGS}, {"extend", (PyCFunction)immutable_list_op, METH_O}, {"pop", (PyCFunction)immutable_list_op, METH_VARARGS}, {"remove", (PyCFunction)immutable_list_op, METH_VARARGS}, {"index", (PyCFunction)listindex, METH_O}, {"count", (PyCFunction)listcount, METH_O}, {"reverse", (PyCFunction)immutable_list_op, METH_VARARGS}, {"sort", (PyCFunction)immutable_list_op, METH_VARARGS}, {NULL, NULL} /* sentinel */ }; static int immutable_list_ass(void) { immutable_list_op(); return -1; } static PySequenceMethods immutable_list_as_sequence = { (inquiry)list_length, /* sq_length */ (binaryfunc)list_concat, /* sq_concat */ (intargfunc)list_repeat, /* sq_repeat */ (intargfunc)list_item, /* sq_item */ (intintargfunc)list_slice, /* sq_slice */ (intobjargproc)immutable_list_ass, /* sq_ass_item */ (intintobjargproc)immutable_list_ass, /* sq_ass_slice */ (objobjproc)list_contains, /* sq_contains */ }; static PyTypeObject immutable_list_type = { PyObject_HEAD_INIT(&PyType_Type) 0, "list (immutable, during sort)", sizeof(PyListObject), 0, 0, /* Cannot happen */ /* tp_dealloc */ (printfunc)list_print, /* tp_print */ 0, /* tp_getattr */ 0, /* tp_setattr */ 0, /* Won't be called */ /* tp_compare */ (reprfunc)list_repr, /* tp_repr */ 0, /* tp_as_number */ &immutable_list_as_sequence, /* tp_as_sequence */ 0, /* tp_as_mapping */ list_nohash, /* tp_hash */ 0, /* tp_call */ 0, /* tp_str */ PyObject_GenericGetAttr, /* tp_getattro */ 0, /* tp_setattro */ 0, /* tp_as_buffer */ Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC,/* tp_flags */ list_doc, /* tp_doc */ (traverseproc)list_traverse, /* tp_traverse */ 0, /* tp_clear */ list_richcompare, /* tp_richcompare */ 0, /* tp_weaklistoffset */ 0, /* tp_iter */ 0, /* tp_iternext */ immutable_list_methods, /* tp_methods */ 0, /* tp_members */ 0, /* tp_getset */ 0, /* tp_base */ 0, /* tp_dict */ 0, /* tp_descr_get */ 0, /* tp_descr_set */ 0, /* tp_init */ /* NOTE: This is *not* the standard list_type struct! */ }; /*********************** List Iterator **************************/ typedef struct { PyObject_HEAD long it_index; PyListObject *it_seq; } listiterobject; PyTypeObject PyListIter_Type; PyObject * list_iter(PyObject *seq) { listiterobject *it; if (!PyList_Check(seq)) { PyErr_BadInternalCall(); return NULL; } it = PyObject_GC_New(listiterobject, &PyListIter_Type); if (it == NULL) return NULL; it->it_index = 0; Py_INCREF(seq); it->it_seq = (PyListObject *)seq; _PyObject_GC_TRACK(it); return (PyObject *)it; } static void listiter_dealloc(listiterobject *it) { _PyObject_GC_UNTRACK(it); Py_DECREF(it->it_seq); PyObject_GC_Del(it); } static int listiter_traverse(listiterobject *it, visitproc visit, void *arg) { return visit((PyObject *)it->it_seq, arg); } static PyObject * listiter_getiter(PyObject *it) { Py_INCREF(it); return it; } static PyObject * listiter_next(listiterobject *it) { PyListObject *seq; PyObject *item; assert(it != NULL); seq = it->it_seq; assert(PyList_Check(seq)); if (it->it_index < PyList_GET_SIZE(seq)) { item = PyList_GET_ITEM(seq, it->it_index); ++it->it_index; Py_INCREF(item); return item; } return NULL; } static PyMethodDef listiter_methods[] = { {"next", (PyCFunction)listiter_next, METH_NOARGS, "it.next() -- get the next value, or raise StopIteration"}, {NULL, NULL} /* sentinel */ }; PyTypeObject PyListIter_Type = { PyObject_HEAD_INIT(&PyType_Type) 0, /* ob_size */ "listiterator", /* tp_name */ sizeof(listiterobject), /* tp_basicsize */ 0, /* tp_itemsize */ /* methods */ (destructor)listiter_dealloc, /* tp_dealloc */ 0, /* tp_print */ 0, /* tp_getattr */ 0, /* tp_setattr */ 0, /* tp_compare */ 0, /* tp_repr */ 0, /* tp_as_number */ 0, /* tp_as_sequence */ 0, /* tp_as_mapping */ 0, /* tp_hash */ 0, /* tp_call */ 0, /* tp_str */ PyObject_GenericGetAttr, /* tp_getattro */ 0, /* tp_setattro */ 0, /* tp_as_buffer */ Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC,/* tp_flags */ 0, /* tp_doc */ (traverseproc)listiter_traverse, /* tp_traverse */ 0, /* tp_clear */ 0, /* tp_richcompare */ 0, /* tp_weaklistoffset */ (getiterfunc)listiter_getiter, /* tp_iter */ (iternextfunc)listiter_next, /* tp_iternext */ listiter_methods, /* tp_methods */ 0, /* tp_members */ 0, /* tp_getset */ 0, /* tp_base */ 0, /* tp_dict */ 0, /* tp_descr_get */ 0, /* tp_descr_set */ };