import unittest from test import test_support from contextlib import closing, nested import gc import pickle import select import signal import subprocess import traceback import sys, os, time, errno if sys.platform[:3] in ('win', 'os2') or sys.platform == 'riscos': raise test_support.TestSkipped("Can't test signal on %s" % \ sys.platform) class HandlerBCalled(Exception): pass def exit_subprocess(): """Use os._exit(0) to exit the current subprocess. Otherwise, the test catches the SystemExit and continues executing in parallel with the original test, so you wind up with an exponential number of tests running concurrently. """ os._exit(0) def ignoring_eintr(__func, *args, **kwargs): try: return __func(*args, **kwargs) except EnvironmentError as e: if e.errno != errno.EINTR: raise return None class InterProcessSignalTests(unittest.TestCase): MAX_DURATION = 20 # Entire test should last at most 20 sec. def setUp(self): self.using_gc = gc.isenabled() gc.disable() def tearDown(self): if self.using_gc: gc.enable() def format_frame(self, frame, limit=None): return ''.join(traceback.format_stack(frame, limit=limit)) def handlerA(self, signum, frame): self.a_called = True if test_support.verbose: print "handlerA invoked from signal %s at:\n%s" % ( signum, self.format_frame(frame, limit=1)) def handlerB(self, signum, frame): self.b_called = True if test_support.verbose: print "handlerB invoked from signal %s at:\n%s" % ( signum, self.format_frame(frame, limit=1)) raise HandlerBCalled(signum, self.format_frame(frame)) def wait(self, child): """Wait for child to finish, ignoring EINTR.""" while True: try: child.wait() return except OSError as e: if e.errno != errno.EINTR: raise def run_test(self): # Install handlers. This function runs in a sub-process, so we # don't worry about re-setting the default handlers. signal.signal(signal.SIGHUP, self.handlerA) signal.signal(signal.SIGUSR1, self.handlerB) signal.signal(signal.SIGUSR2, signal.SIG_IGN) signal.signal(signal.SIGALRM, signal.default_int_handler) # Variables the signals will modify: self.a_called = False self.b_called = False # Let the sub-processes know who to send signals to. pid = os.getpid() if test_support.verbose: print "test runner's pid is", pid child = ignoring_eintr(subprocess.Popen, ['kill', '-HUP', str(pid)]) if child: self.wait(child) if not self.a_called: time.sleep(1) # Give the signal time to be delivered. self.assertTrue(self.a_called) self.assertFalse(self.b_called) self.a_called = False # Make sure the signal isn't delivered while the previous # Popen object is being destroyed, because __del__ swallows # exceptions. del child try: child = subprocess.Popen(['kill', '-USR1', str(pid)]) # This wait should be interrupted by the signal's exception. self.wait(child) time.sleep(1) # Give the signal time to be delivered. self.fail('HandlerBCalled exception not thrown') except HandlerBCalled: self.assertTrue(self.b_called) self.assertFalse(self.a_called) if test_support.verbose: print "HandlerBCalled exception caught" child = ignoring_eintr(subprocess.Popen, ['kill', '-USR2', str(pid)]) if child: self.wait(child) # Nothing should happen. try: signal.alarm(1) # The race condition in pause doesn't matter in this case, # since alarm is going to raise a KeyboardException, which # will skip the call. signal.pause() # But if another signal arrives before the alarm, pause # may return early. time.sleep(1) except KeyboardInterrupt: if test_support.verbose: print "KeyboardInterrupt (the alarm() went off)" except: self.fail("Some other exception woke us from pause: %s" % traceback.format_exc()) else: self.fail("pause returned of its own accord, and the signal" " didn't arrive after another second.") def test_main(self): # Issue 3864, unknown if this affects earlier versions of freebsd also if sys.platform=='freebsd6': if test_support.verbose: sys.stderr.write('skipping -- inter process signals not ' 'reliable (do not mix well with threading) on freebsd6\n') return # This function spawns a child process to insulate the main # test-running process from all the signals. It then # communicates with that child process over a pipe and # re-raises information about any exceptions the child # throws. The real work happens in self.run_test(). os_done_r, os_done_w = os.pipe() with nested(closing(os.fdopen(os_done_r)), closing(os.fdopen(os_done_w, 'w'))) as (done_r, done_w): child = os.fork() if child == 0: # In the child process; run the test and report results # through the pipe. try: done_r.close() # Have to close done_w again here because # exit_subprocess() will skip the enclosing with block. with closing(done_w): try: self.run_test() except: pickle.dump(traceback.format_exc(), done_w) else: pickle.dump(None, done_w) except: print 'Uh oh, raised from pickle.' traceback.print_exc() finally: exit_subprocess() done_w.close() # Block for up to MAX_DURATION seconds for the test to finish. r, w, x = select.select([done_r], [], [], self.MAX_DURATION) if done_r in r: tb = pickle.load(done_r) if tb: self.fail(tb) else: os.kill(child, signal.SIGKILL) self.fail('Test deadlocked after %d seconds.' % self.MAX_DURATION) class BasicSignalTests(unittest.TestCase): def trivial_signal_handler(self, *args): pass def test_out_of_range_signal_number_raises_error(self): self.assertRaises(ValueError, signal.getsignal, 4242) self.assertRaises(ValueError, signal.signal, 4242, self.trivial_signal_handler) def test_setting_signal_handler_to_none_raises_error(self): self.assertRaises(TypeError, signal.signal, signal.SIGUSR1, None) def test_getsignal(self): hup = signal.signal(signal.SIGHUP, self.trivial_signal_handler) self.assertEquals(signal.getsignal(signal.SIGHUP), self.trivial_signal_handler) signal.signal(signal.SIGHUP, hup) self.assertEquals(signal.getsignal(signal.SIGHUP), hup) class WakeupSignalTests(unittest.TestCase): TIMEOUT_FULL = 10 TIMEOUT_HALF = 5 def test_wakeup_fd_early(self): import select signal.alarm(1) before_time = time.time() # We attempt to get a signal during the sleep, # before select is called time.sleep(self.TIMEOUT_FULL) mid_time = time.time() self.assert_(mid_time - before_time < self.TIMEOUT_HALF) select.select([self.read], [], [], self.TIMEOUT_FULL) after_time = time.time() self.assert_(after_time - mid_time < self.TIMEOUT_HALF) def test_wakeup_fd_during(self): import select signal.alarm(1) before_time = time.time() # We attempt to get a signal during the select call self.assertRaises(select.error, select.select, [self.read], [], [], self.TIMEOUT_FULL) after_time = time.time() self.assert_(after_time - before_time < self.TIMEOUT_HALF) def setUp(self): import fcntl self.alrm = signal.signal(signal.SIGALRM, lambda x,y:None) self.read, self.write = os.pipe() flags = fcntl.fcntl(self.write, fcntl.F_GETFL, 0) flags = flags | os.O_NONBLOCK fcntl.fcntl(self.write, fcntl.F_SETFL, flags) self.old_wakeup = signal.set_wakeup_fd(self.write) def tearDown(self): signal.set_wakeup_fd(self.old_wakeup) os.close(self.read) os.close(self.write) signal.signal(signal.SIGALRM, self.alrm) class SiginterruptTest(unittest.TestCase): signum = signal.SIGUSR1 def setUp(self): """Install a no-op signal handler that can be set to allow interrupts or not, and arrange for the original signal handler to be re-installed when the test is finished. """ self._cleanups = [] oldhandler = signal.signal(self.signum, lambda x,y: None) self.addCleanup(signal.signal, self.signum, oldhandler) def tearDown(self): """Run any cleanup functions which have been registered. """ for (f, a) in self._cleanups: f(*a) def addCleanup(self, f, *a): """Register a function to be called at the end of the test method run. """ self._cleanups.append((f, a)) def readpipe_interrupted(self): """Perform a read during which a signal will arrive. Return True if the read is interrupted by the signal and raises an exception. Return False if it returns normally. """ # Create a pipe that can be used for the read. Also clean it up # when the test is over, since nothing else will (but see below for # the write end). r, w = os.pipe() self.addCleanup(os.close, r) # Create another process which can send a signal to this one to try # to interrupt the read. ppid = os.getpid() pid = os.fork() if pid == 0: # Child code: sleep to give the parent enough time to enter the # read() call (there's a race here, but it's really tricky to # eliminate it); then signal the parent process. Also, sleep # again to make it likely that the signal is delivered to the # parent process before the child exits. If the child exits # first, the write end of the pipe will be closed and the test # is invalid. try: time.sleep(0.2) os.kill(ppid, self.signum) time.sleep(0.2) finally: # No matter what, just exit as fast as possible now. exit_subprocess() else: # Parent code. # Make sure the child is eventually reaped, else it'll be a # zombie for the rest of the test suite run. self.addCleanup(os.waitpid, pid, 0) # Close the write end of the pipe. The child has a copy, so # it's not really closed until the child exits. We need it to # close when the child exits so that in the non-interrupt case # the read eventually completes, otherwise we could just close # it *after* the test. os.close(w) # Try the read and report whether it is interrupted or not to # the caller. try: d = os.read(r, 1) return False except OSError, err: if err.errno != errno.EINTR: raise return True def test_without_siginterrupt(self): """If a signal handler is installed and siginterrupt is not called at all, when that signal arrives, it interrupts a syscall that's in progress. """ i = self.readpipe_interrupted() self.assertTrue(i) # Arrival of the signal shouldn't have changed anything. i = self.readpipe_interrupted() self.assertTrue(i) def test_siginterrupt_on(self): """If a signal handler is installed and siginterrupt is called with a true value for the second argument, when that signal arrives, it interrupts a syscall that's in progress. """ signal.siginterrupt(self.signum, 1) i = self.readpipe_interrupted() self.assertTrue(i) # Arrival of the signal shouldn't have changed anything. i = self.readpipe_interrupted() self.assertTrue(i) def test_siginterrupt_off(self): """If a signal handler is installed and siginterrupt is called with a false value for the second argument, when that signal arrives, it does not interrupt a syscall that's in progress. """ signal.siginterrupt(self.signum, 0) i = self.readpipe_interrupted() self.assertFalse(i) # Arrival of the signal shouldn't have changed anything. i = self.readpipe_interrupted() self.assertFalse(i) class ItimerTest(unittest.TestCase): def setUp(self): self.hndl_called = False self.hndl_count = 0 self.itimer = None self.old_alarm = signal.signal(signal.SIGALRM, self.sig_alrm) def tearDown(self): signal.signal(signal.SIGALRM, self.old_alarm) if self.itimer is not None: # test_itimer_exc doesn't change this attr # just ensure that itimer is stopped signal.setitimer(self.itimer, 0) def sig_alrm(self, *args): self.hndl_called = True if test_support.verbose: print("SIGALRM handler invoked", args) def sig_vtalrm(self, *args): self.hndl_called = True if self.hndl_count > 3: # it shouldn't be here, because it should have been disabled. raise signal.ItimerError("setitimer didn't disable ITIMER_VIRTUAL " "timer.") elif self.hndl_count == 3: # disable ITIMER_VIRTUAL, this function shouldn't be called anymore signal.setitimer(signal.ITIMER_VIRTUAL, 0) if test_support.verbose: print("last SIGVTALRM handler call") self.hndl_count += 1 if test_support.verbose: print("SIGVTALRM handler invoked", args) def sig_prof(self, *args): self.hndl_called = True signal.setitimer(signal.ITIMER_PROF, 0) if test_support.verbose: print("SIGPROF handler invoked", args) def test_itimer_exc(self): # XXX I'm assuming -1 is an invalid itimer, but maybe some platform # defines it ? self.assertRaises(signal.ItimerError, signal.setitimer, -1, 0) # Negative times are treated as zero on some platforms. if 0: self.assertRaises(signal.ItimerError, signal.setitimer, signal.ITIMER_REAL, -1) def test_itimer_real(self): self.itimer = signal.ITIMER_REAL signal.setitimer(self.itimer, 1.0) if test_support.verbose: print("\ncall pause()...") signal.pause() self.assertEqual(self.hndl_called, True) def test_itimer_virtual(self): # Issue 3864, unknown if this affects earlier versions of freebsd also if sys.platform=='freebsd6': if test_support.verbose: sys.stderr.write('skipping -- itimer not reliable (does not ' 'mix well with threading) on freebsd6\n') return self.itimer = signal.ITIMER_VIRTUAL signal.signal(signal.SIGVTALRM, self.sig_vtalrm) signal.setitimer(self.itimer, 0.3, 0.2) start_time = time.time() while time.time() - start_time < 60.0: # use up some virtual time by doing real work _ = pow(12345, 67890, 10000019) if signal.getitimer(self.itimer) == (0.0, 0.0): break # sig_vtalrm handler stopped this itimer else: # Issue 8424 sys.stderr.write("test_itimer_virtual: timeout: likely cause: " "machine too slow or load too high.\n") return # virtual itimer should be (0.0, 0.0) now self.assertEquals(signal.getitimer(self.itimer), (0.0, 0.0)) # and the handler should have been called self.assertEquals(self.hndl_called, True) def test_itimer_prof(self): # Issue 3864, unknown if this affects earlier versions of freebsd also if sys.platform=='freebsd6': if test_support.verbose: sys.stderr.write('skipping -- itimer not reliable (does not ' 'mix well with threading) on freebsd6\n') return self.itimer = signal.ITIMER_PROF signal.signal(signal.SIGPROF, self.sig_prof) signal.setitimer(self.itimer, 0.2, 0.2) start_time = time.time() while time.time() - start_time < 60.0: # do some work _ = pow(12345, 67890, 10000019) if signal.getitimer(self.itimer) == (0.0, 0.0): break # sig_prof handler stopped this itimer else: # Issue 8424 sys.stdout.write("test_itimer_prof: timeout: likely cause: " "machine too slow or load too high.\n") return # profiling itimer should be (0.0, 0.0) now self.assertEquals(signal.getitimer(self.itimer), (0.0, 0.0)) # and the handler should have been called self.assertEqual(self.hndl_called, True) def test_main(): test_support.run_unittest(BasicSignalTests, InterProcessSignalTests, WakeupSignalTests, SiginterruptTest, ItimerTest) if __name__ == "__main__": test_main()