/* Socket module */ /* This module provides an interface to Berkeley socket IPC. Limitations: - Only AF_INET, AF_INET6 and AF_UNIX address families are supported in a portable manner, though AF_PACKET is supported under Linux. - No read/write operations (use sendall/recv or makefile instead). - Additional restrictions apply on some non-Unix platforms (compensated for by socket.py). Module interface: - socket.error: exception raised for socket specific errors - socket.gaierror: exception raised for getaddrinfo/getnameinfo errors, a subclass of socket.error - socket.herror: exception raised for gethostby* errors, a subclass of socket.error - socket.fromfd(fd, family, type[, proto]) --> new socket object (created from an existing file descriptor) - socket.gethostbyname(hostname) --> host IP address (string: 'dd.dd.dd.dd') - socket.gethostbyaddr(IP address) --> (hostname, [alias, ...], [IP addr, ...]) - socket.gethostname() --> host name (string: 'spam' or 'spam.domain.com') - socket.getprotobyname(protocolname) --> protocol number - socket.getservbyname(servicename, protocolname) --> port number - socket.socket([family[, type [, proto]]]) --> new socket object - socket.ntohs(16 bit value) --> new int object - socket.ntohl(32 bit value) --> new int object - socket.htons(16 bit value) --> new int object - socket.htonl(32 bit value) --> new int object - socket.getaddrinfo(host, port [, family, socktype, proto, flags]) --> List of (family, socktype, proto, canonname, sockaddr) - socket.getnameinfo(sockaddr, flags) --> (host, port) - socket.AF_INET, socket.SOCK_STREAM, etc.: constants from - socket.has_ipv6: boolean value indicating if IPv6 is supported - socket.inet_aton(IP address) -> 32-bit packed IP representation - socket.inet_ntoa(packed IP) -> IP address string - socket.getdefaulttimeout() -> None | float - socket.setdefaulttimeout(None | float) - an Internet socket address is a pair (hostname, port) where hostname can be anything recognized by gethostbyname() (including the dd.dd.dd.dd notation) and port is in host byte order - where a hostname is returned, the dd.dd.dd.dd notation is used - a UNIX domain socket address is a string specifying the pathname - an AF_PACKET socket address is a tuple containing a string specifying the ethernet interface and an integer specifying the Ethernet protocol number to be received. For example: ("eth0",0x1234). Optional 3rd,4th,5th elements in the tuple specify packet-type and ha-type/addr -- these are ignored by networking code, but accepted since they are returned by the getsockname() method. Local naming conventions: - names starting with sock_ are socket object methods - names starting with socket_ are module-level functions - names starting with PySocket are exported through socketmodule.h */ #include "Python.h" #undef MAX #define MAX(x, y) ((x) < (y) ? (y) : (x)) /* Socket object documentation */ PyDoc_STRVAR(sock_doc, "socket([family[, type[, proto]]]) -> socket object\n\ \n\ Open a socket of the given type. The family argument specifies the\n\ address family; it defaults to AF_INET. The type argument specifies\n\ whether this is a stream (SOCK_STREAM, this is the default)\n\ or datagram (SOCK_DGRAM) socket. The protocol argument defaults to 0,\n\ specifying the default protocol. Keyword arguments are accepted.\n\ \n\ A socket object represents one endpoint of a network connection.\n\ \n\ Methods of socket objects (keyword arguments not allowed):\n\ \n\ accept() -- accept a connection, returning new socket and client address\n\ bind(addr) -- bind the socket to a local address\n\ close() -- close the socket\n\ connect(addr) -- connect the socket to a remote address\n\ connect_ex(addr) -- connect, return an error code instead of an exception\n\ dup() -- return a new socket object identical to the current one [*]\n\ fileno() -- return underlying file descriptor\n\ getpeername() -- return remote address [*]\n\ getsockname() -- return local address\n\ getsockopt(level, optname[, buflen]) -- get socket options\n\ gettimeout() -- return timeout or None\n\ listen(n) -- start listening for incoming connections\n\ makefile([mode, [bufsize]]) -- return a file object for the socket [*]\n\ recv(buflen[, flags]) -- receive data\n\ recvfrom(buflen[, flags]) -- receive data and sender's address\n\ sendall(data[, flags]) -- send all data\n\ send(data[, flags]) -- send data, may not send all of it\n\ sendto(data[, flags], addr) -- send data to a given address\n\ setblocking(0 | 1) -- set or clear the blocking I/O flag\n\ setsockopt(level, optname, value) -- set socket options\n\ settimeout(None | float) -- set or clear the timeout\n\ shutdown(how) -- shut down traffic in one or both directions\n\ \n\ [*] not available on all platforms!"); /* XXX This is a terrible mess of platform-dependent preprocessor hacks. I hope some day someone can clean this up please... */ /* Hacks for gethostbyname_r(). On some non-Linux platforms, the configure script doesn't get this right, so we hardcode some platform checks below. On the other hand, not all Linux versions agree, so there the settings computed by the configure script are needed! */ #ifndef linux # undef HAVE_GETHOSTBYNAME_R_3_ARG # undef HAVE_GETHOSTBYNAME_R_5_ARG # undef HAVE_GETHOSTBYNAME_R_6_ARG #endif #ifndef WITH_THREAD # undef HAVE_GETHOSTBYNAME_R #endif #ifdef HAVE_GETHOSTBYNAME_R # if defined(_AIX) || defined(__osf__) # define HAVE_GETHOSTBYNAME_R_3_ARG # elif defined(__sun) || defined(__sgi) # define HAVE_GETHOSTBYNAME_R_5_ARG # elif defined(linux) /* Rely on the configure script */ # else # undef HAVE_GETHOSTBYNAME_R # endif #endif #if !defined(HAVE_GETHOSTBYNAME_R) && defined(WITH_THREAD) && \ !defined(MS_WINDOWS) # define USE_GETHOSTBYNAME_LOCK #endif /* On systems on which getaddrinfo() is believed to not be thread-safe, (this includes the getaddrinfo emulation) protect access with a lock. */ #if defined(WITH_THREAD) && (defined(__APPLE__) || defined(__FreeBSD__) || \ defined(__OpenBSD__) || defined(__NetBSD__) || !defined(HAVE_GETADDRINFO)) #define USE_GETADDRINFO_LOCK #endif #ifdef USE_GETADDRINFO_LOCK #define ACQUIRE_GETADDRINFO_LOCK PyThread_acquire_lock(netdb_lock, 1); #define RELEASE_GETADDRINFO_LOCK PyThread_release_lock(netdb_lock); #else #define ACQUIRE_GETADDRINFO_LOCK #define RELEASE_GETADDRINFO_LOCK #endif #if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK) # include "pythread.h" #endif #if defined(PYCC_VACPP) # include # include # include # include # include #endif #if defined(__VMS) #if ! defined(_SOCKADDR_LEN) # ifdef getaddrinfo # undef getaddrinfo # endif # include "TCPIP_IOCTL_ROUTINE" #else # include #endif #endif #if defined(PYOS_OS2) # define INCL_DOS # define INCL_DOSERRORS # define INCL_NOPMAPI # include #endif #if defined(__sgi) && _COMPILER_VERSION>700 && !_SGIAPI /* make sure that the reentrant (gethostbyaddr_r etc) functions are declared correctly if compiling with MIPSPro 7.x in ANSI C mode (default) */ /* XXX Using _SGIAPI is the wrong thing, but I don't know what the right thing is. */ #define _SGIAPI 1 #define HAVE_INET_PTON #include #endif /* Irix 6.5 fails to define this variable at all. This is needed for both GCC and SGI's compiler. I'd say that the SGI headers are just busted. */ #if defined(__sgi) && !defined(INET_ADDRSTRLEN) #define INET_ADDRSTRLEN 16 #endif /* Generic includes */ #include #include /* Generic socket object definitions and includes */ #define PySocket_BUILDING_SOCKET #include "socketmodule.h" /* Addressing includes */ #ifndef MS_WINDOWS /* Non-MS WINDOWS includes */ # include /* Headers needed for inet_ntoa() and inet_addr() */ # ifdef __BEOS__ # include # elif defined(PYOS_OS2) && defined(PYCC_VACPP) # include typedef size_t socklen_t; # else # include # endif # ifndef RISCOS # include # else # include # include # define NO_DUP int h_errno; /* not used */ # define INET_ADDRSTRLEN 16 # endif #else /* MS_WINDOWS includes */ # include #endif #ifdef HAVE_STDDEF_H # include #endif #ifndef offsetof # define offsetof(type, member) ((size_t)(&((type *)0)->member)) #endif #ifndef O_NONBLOCK # define O_NONBLOCK O_NDELAY #endif #include "addrinfo.h" #ifndef HAVE_INET_PTON int inet_pton(int af, const char *src, void *dst); const char *inet_ntop(int af, const void *src, char *dst, socklen_t size); #endif #ifdef __APPLE__ /* On OS X, getaddrinfo returns no error indication of lookup failure, so we must use the emulation instead of the libinfo implementation. Unfortunately, performing an autoconf test for this bug would require DNS access for the machine performing the configuration, which is not acceptable. Therefore, we determine the bug just by checking for __APPLE__. If this bug gets ever fixed, perhaps checking for sys/version.h would be appropriate, which is 10/0 on the system with the bug. */ #ifndef HAVE_GETNAMEINFO /* This bug seems to be fixed in Jaguar. Ths easiest way I could Find to check for Jaguar is that it has getnameinfo(), which older releases don't have */ #undef HAVE_GETADDRINFO #endif #endif /* I know this is a bad practice, but it is the easiest... */ #if !defined(HAVE_GETADDRINFO) /* avoid clashes with the C library definition of the symbol. */ #define getaddrinfo fake_getaddrinfo #define gai_strerror fake_gai_strerror #define freeaddrinfo fake_freeaddrinfo #include "getaddrinfo.c" #endif #if !defined(HAVE_GETNAMEINFO) #define getnameinfo fake_getnameinfo #include "getnameinfo.c" #endif #if defined(MS_WINDOWS) || defined(__BEOS__) /* BeOS suffers from the same socket dichotomy as Win32... - [cjh] */ /* seem to be a few differences in the API */ #define SOCKETCLOSE closesocket #define NO_DUP /* Actually it exists on NT 3.5, but what the heck... */ #endif #ifdef MS_WIN32 #define EAFNOSUPPORT WSAEAFNOSUPPORT #define snprintf _snprintf #endif #if defined(PYOS_OS2) && !defined(PYCC_GCC) #define SOCKETCLOSE soclose #define NO_DUP /* Sockets are Not Actual File Handles under OS/2 */ #endif #ifndef SOCKETCLOSE #define SOCKETCLOSE close #endif #ifdef __VMS /* TCP/IP Services for VMS uses a maximum send/revc buffer length of 65535 */ #define SEGMENT_SIZE 65535 #endif /* * Constants for getnameinfo() */ #if !defined(NI_MAXHOST) #define NI_MAXHOST 1025 #endif #if !defined(NI_MAXSERV) #define NI_MAXSERV 32 #endif /* XXX There's a problem here: *static* functions are not supposed to have a Py prefix (or use CapitalizedWords). Later... */ /* Global variable holding the exception type for errors detected by this module (but not argument type or memory errors, etc.). */ static PyObject *socket_error; static PyObject *socket_herror; static PyObject *socket_gaierror; static PyObject *socket_timeout; #ifdef RISCOS /* Global variable which is !=0 if Python is running in a RISC OS taskwindow */ static int taskwindow; #endif /* A forward reference to the socket type object. The sock_type variable contains pointers to various functions, some of which call new_sockobject(), which uses sock_type, so there has to be a circular reference. */ static PyTypeObject sock_type; /* Convenience function to raise an error according to errno and return a NULL pointer from a function. */ static PyObject * set_error(void) { #ifdef MS_WINDOWS int err_no = WSAGetLastError(); static struct { int no; const char *msg; } *msgp, msgs[] = { {WSAEINTR, "Interrupted system call"}, {WSAEBADF, "Bad file descriptor"}, {WSAEACCES, "Permission denied"}, {WSAEFAULT, "Bad address"}, {WSAEINVAL, "Invalid argument"}, {WSAEMFILE, "Too many open files"}, {WSAEWOULDBLOCK, "The socket operation could not complete " "without blocking"}, {WSAEINPROGRESS, "Operation now in progress"}, {WSAEALREADY, "Operation already in progress"}, {WSAENOTSOCK, "Socket operation on non-socket"}, {WSAEDESTADDRREQ, "Destination address required"}, {WSAEMSGSIZE, "Message too long"}, {WSAEPROTOTYPE, "Protocol wrong type for socket"}, {WSAENOPROTOOPT, "Protocol not available"}, {WSAEPROTONOSUPPORT, "Protocol not supported"}, {WSAESOCKTNOSUPPORT, "Socket type not supported"}, {WSAEOPNOTSUPP, "Operation not supported"}, {WSAEPFNOSUPPORT, "Protocol family not supported"}, {WSAEAFNOSUPPORT, "Address family not supported"}, {WSAEADDRINUSE, "Address already in use"}, {WSAEADDRNOTAVAIL, "Can't assign requested address"}, {WSAENETDOWN, "Network is down"}, {WSAENETUNREACH, "Network is unreachable"}, {WSAENETRESET, "Network dropped connection on reset"}, {WSAECONNABORTED, "Software caused connection abort"}, {WSAECONNRESET, "Connection reset by peer"}, {WSAENOBUFS, "No buffer space available"}, {WSAEISCONN, "Socket is already connected"}, {WSAENOTCONN, "Socket is not connected"}, {WSAESHUTDOWN, "Can't send after socket shutdown"}, {WSAETOOMANYREFS, "Too many references: can't splice"}, {WSAETIMEDOUT, "Operation timed out"}, {WSAECONNREFUSED, "Connection refused"}, {WSAELOOP, "Too many levels of symbolic links"}, {WSAENAMETOOLONG, "File name too long"}, {WSAEHOSTDOWN, "Host is down"}, {WSAEHOSTUNREACH, "No route to host"}, {WSAENOTEMPTY, "Directory not empty"}, {WSAEPROCLIM, "Too many processes"}, {WSAEUSERS, "Too many users"}, {WSAEDQUOT, "Disc quota exceeded"}, {WSAESTALE, "Stale NFS file handle"}, {WSAEREMOTE, "Too many levels of remote in path"}, {WSASYSNOTREADY, "Network subsystem is unvailable"}, {WSAVERNOTSUPPORTED, "WinSock version is not supported"}, {WSANOTINITIALISED, "Successful WSAStartup() not yet performed"}, {WSAEDISCON, "Graceful shutdown in progress"}, /* Resolver errors */ {WSAHOST_NOT_FOUND, "No such host is known"}, {WSATRY_AGAIN, "Host not found, or server failed"}, {WSANO_RECOVERY, "Unexpected server error encountered"}, {WSANO_DATA, "Valid name without requested data"}, {WSANO_ADDRESS, "No address, look for MX record"}, {0, NULL} }; if (err_no) { PyObject *v; const char *msg = "winsock error"; for (msgp = msgs; msgp->msg; msgp++) { if (err_no == msgp->no) { msg = msgp->msg; break; } } v = Py_BuildValue("(is)", err_no, msg); if (v != NULL) { PyErr_SetObject(socket_error, v); Py_DECREF(v); } return NULL; } else #endif #if defined(PYOS_OS2) && !defined(PYCC_GCC) if (sock_errno() != NO_ERROR) { APIRET rc; ULONG msglen; char outbuf[100]; int myerrorcode = sock_errno(); /* Retrieve socket-related error message from MPTN.MSG file */ rc = DosGetMessage(NULL, 0, outbuf, sizeof(outbuf), myerrorcode - SOCBASEERR + 26, "mptn.msg", &msglen); if (rc == NO_ERROR) { PyObject *v; /* OS/2 doesn't guarantee a terminator */ outbuf[msglen] = '\0'; if (strlen(outbuf) > 0) { /* If non-empty msg, trim CRLF */ char *lastc = &outbuf[ strlen(outbuf)-1 ]; while (lastc > outbuf && isspace(*lastc)) { /* Trim trailing whitespace (CRLF) */ *lastc-- = '\0'; } } v = Py_BuildValue("(is)", myerrorcode, outbuf); if (v != NULL) { PyErr_SetObject(socket_error, v); Py_DECREF(v); } return NULL; } } #endif #if defined(RISCOS) if (_inet_error.errnum != NULL) { PyObject *v; v = Py_BuildValue("(is)", errno, _inet_err()); if (v != NULL) { PyErr_SetObject(socket_error, v); Py_DECREF(v); } return NULL; } #endif return PyErr_SetFromErrno(socket_error); } static PyObject * set_herror(int h_error) { PyObject *v; #ifdef HAVE_HSTRERROR v = Py_BuildValue("(is)", h_error, (char *)hstrerror(h_error)); #else v = Py_BuildValue("(is)", h_error, "host not found"); #endif if (v != NULL) { PyErr_SetObject(socket_herror, v); Py_DECREF(v); } return NULL; } static PyObject * set_gaierror(int error) { PyObject *v; #ifdef EAI_SYSTEM /* EAI_SYSTEM is not available on Windows XP. */ if (error == EAI_SYSTEM) return set_error(); #endif #ifdef HAVE_GAI_STRERROR v = Py_BuildValue("(is)", error, gai_strerror(error)); #else v = Py_BuildValue("(is)", error, "getaddrinfo failed"); #endif if (v != NULL) { PyErr_SetObject(socket_gaierror, v); Py_DECREF(v); } return NULL; } /* Function to perform the setting of socket blocking mode internally. block = (1 | 0). */ static int internal_setblocking(PySocketSockObject *s, int block) { #ifndef RISCOS #ifndef MS_WINDOWS int delay_flag; #endif #endif Py_BEGIN_ALLOW_THREADS #ifdef __BEOS__ block = !block; setsockopt(s->sock_fd, SOL_SOCKET, SO_NONBLOCK, (void *)(&block), sizeof(int)); #else #ifndef RISCOS #ifndef MS_WINDOWS #if defined(PYOS_OS2) && !defined(PYCC_GCC) block = !block; ioctl(s->sock_fd, FIONBIO, (caddr_t)&block, sizeof(block)); #elif defined(__VMS) block = !block; ioctl(s->sock_fd, FIONBIO, (char *)&block); #else /* !PYOS_OS2 && !_VMS */ delay_flag = fcntl(s->sock_fd, F_GETFL, 0); if (block) delay_flag &= (~O_NONBLOCK); else delay_flag |= O_NONBLOCK; fcntl(s->sock_fd, F_SETFL, delay_flag); #endif /* !PYOS_OS2 */ #else /* MS_WINDOWS */ block = !block; ioctlsocket(s->sock_fd, FIONBIO, (u_long*)&block); #endif /* MS_WINDOWS */ #else /* RISCOS */ block = !block; socketioctl(s->sock_fd, FIONBIO, (u_long*)&block); #endif /* RISCOS */ #endif /* __BEOS__ */ Py_END_ALLOW_THREADS /* Since these don't return anything */ return 1; } /* Do a select() on the socket, if necessary (sock_timeout > 0). The argument writing indicates the direction. This does not raise an exception; we'll let our caller do that after they've reacquired the interpreter lock. Returns 1 on timeout, 0 otherwise. */ static int internal_select(PySocketSockObject *s, int writing) { fd_set fds; struct timeval tv; int n; /* Nothing to do unless we're in timeout mode (not non-blocking) */ if (s->sock_timeout <= 0.0) return 0; /* Guard against closed socket */ if (s->sock_fd < 0) return 0; /* Construct the arguments to select */ tv.tv_sec = (int)s->sock_timeout; tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6); FD_ZERO(&fds); FD_SET(s->sock_fd, &fds); /* See if the socket is ready */ if (writing) n = select(s->sock_fd+1, NULL, &fds, NULL, &tv); else n = select(s->sock_fd+1, &fds, NULL, NULL, &tv); if (n == 0) return 1; return 0; } /* Initialize a new socket object. */ static double defaulttimeout = -1.0; /* Default timeout for new sockets */ PyMODINIT_FUNC init_sockobject(PySocketSockObject *s, SOCKET_T fd, int family, int type, int proto) { #ifdef RISCOS int block = 1; #endif s->sock_fd = fd; s->sock_family = family; s->sock_type = type; s->sock_proto = proto; s->sock_timeout = defaulttimeout; s->errorhandler = &set_error; if (defaulttimeout >= 0.0) internal_setblocking(s, 0); #ifdef RISCOS if (taskwindow) socketioctl(s->sock_fd, 0x80046679, (u_long*)&block); #endif } /* Create a new socket object. This just creates the object and initializes it. If the creation fails, return NULL and set an exception (implicit in NEWOBJ()). */ static PySocketSockObject * new_sockobject(SOCKET_T fd, int family, int type, int proto) { PySocketSockObject *s; s = (PySocketSockObject *) PyType_GenericNew(&sock_type, NULL, NULL); if (s != NULL) init_sockobject(s, fd, family, type, proto); return s; } /* Lock to allow python interpreter to continue, but only allow one thread to be in gethostbyname or getaddrinfo */ #if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK) PyThread_type_lock netdb_lock; #endif /* Convert a string specifying a host name or one of a few symbolic names to a numeric IP address. This usually calls gethostbyname() to do the work; the names "" and "" are special. Return the length (IPv4 should be 4 bytes), or negative if an error occurred; then an exception is raised. */ static int setipaddr(char *name, struct sockaddr *addr_ret, size_t addr_ret_size, int af) { struct addrinfo hints, *res; int error; int d1, d2, d3, d4; char ch; memset((void *) addr_ret, '\0', sizeof(*addr_ret)); if (name[0] == '\0') { int siz; memset(&hints, 0, sizeof(hints)); hints.ai_family = af; hints.ai_socktype = SOCK_DGRAM; /*dummy*/ hints.ai_flags = AI_PASSIVE; Py_BEGIN_ALLOW_THREADS ACQUIRE_GETADDRINFO_LOCK error = getaddrinfo(NULL, "0", &hints, &res); Py_END_ALLOW_THREADS /* We assume that those thread-unsafe getaddrinfo() versions *are* safe regarding their return value, ie. that a subsequent call to getaddrinfo() does not destroy the outcome of the first call. */ RELEASE_GETADDRINFO_LOCK if (error) { set_gaierror(error); return -1; } switch (res->ai_family) { case AF_INET: siz = 4; break; #ifdef ENABLE_IPV6 case AF_INET6: siz = 16; break; #endif default: freeaddrinfo(res); PyErr_SetString(socket_error, "unsupported address family"); return -1; } if (res->ai_next) { freeaddrinfo(res); PyErr_SetString(socket_error, "wildcard resolved to multiple address"); return -1; } if (res->ai_addrlen < addr_ret_size) addr_ret_size = res->ai_addrlen; memcpy(addr_ret, res->ai_addr, addr_ret_size); freeaddrinfo(res); return siz; } if (name[0] == '<' && strcmp(name, "") == 0) { struct sockaddr_in *sin; if (af != AF_INET && af != AF_UNSPEC) { PyErr_SetString(socket_error, "address family mismatched"); return -1; } sin = (struct sockaddr_in *)addr_ret; memset((void *) sin, '\0', sizeof(*sin)); sin->sin_family = AF_INET; #ifdef HAVE_SOCKADDR_SA_LEN sin->sin_len = sizeof(*sin); #endif sin->sin_addr.s_addr = INADDR_BROADCAST; return sizeof(sin->sin_addr); } if (sscanf(name, "%d.%d.%d.%d%c", &d1, &d2, &d3, &d4, &ch) == 4 && 0 <= d1 && d1 <= 255 && 0 <= d2 && d2 <= 255 && 0 <= d3 && d3 <= 255 && 0 <= d4 && d4 <= 255) { struct sockaddr_in *sin; sin = (struct sockaddr_in *)addr_ret; sin->sin_addr.s_addr = htonl( ((long) d1 << 24) | ((long) d2 << 16) | ((long) d3 << 8) | ((long) d4 << 0)); sin->sin_family = AF_INET; #ifdef HAVE_SOCKADDR_SA_LEN sin->sin_len = sizeof(*sin); #endif return 4; } memset(&hints, 0, sizeof(hints)); hints.ai_family = af; Py_BEGIN_ALLOW_THREADS ACQUIRE_GETADDRINFO_LOCK error = getaddrinfo(name, NULL, &hints, &res); #if defined(__digital__) && defined(__unix__) if (error == EAI_NONAME && af == AF_UNSPEC) { /* On Tru64 V5.1, numeric-to-addr conversion fails if no address family is given. Assume IPv4 for now.*/ hints.ai_family = AF_INET; error = getaddrinfo(name, NULL, &hints, &res); } #endif Py_END_ALLOW_THREADS RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */ if (error) { set_gaierror(error); return -1; } if (res->ai_addrlen < addr_ret_size) addr_ret_size = res->ai_addrlen; memcpy((char *) addr_ret, res->ai_addr, addr_ret_size); freeaddrinfo(res); switch (addr_ret->sa_family) { case AF_INET: return 4; #ifdef ENABLE_IPV6 case AF_INET6: return 16; #endif default: PyErr_SetString(socket_error, "unknown address family"); return -1; } } /* Create a string object representing an IP address. This is always a string of the form 'dd.dd.dd.dd' (with variable size numbers). */ static PyObject * makeipaddr(struct sockaddr *addr, int addrlen) { char buf[NI_MAXHOST]; int error; error = getnameinfo(addr, addrlen, buf, sizeof(buf), NULL, 0, NI_NUMERICHOST); if (error) { set_gaierror(error); return NULL; } return PyString_FromString(buf); } /* Create an object representing the given socket address, suitable for passing it back to bind(), connect() etc. The family field of the sockaddr structure is inspected to determine what kind of address it really is. */ /*ARGSUSED*/ static PyObject * makesockaddr(int sockfd, struct sockaddr *addr, int addrlen) { if (addrlen == 0) { /* No address -- may be recvfrom() from known socket */ Py_INCREF(Py_None); return Py_None; } #ifdef __BEOS__ /* XXX: BeOS version of accept() doesn't set family correctly */ addr->sa_family = AF_INET; #endif switch (addr->sa_family) { case AF_INET: { struct sockaddr_in *a; PyObject *addrobj = makeipaddr(addr, sizeof(*a)); PyObject *ret = NULL; if (addrobj) { a = (struct sockaddr_in *)addr; ret = Py_BuildValue("Oi", addrobj, ntohs(a->sin_port)); Py_DECREF(addrobj); } return ret; } #if defined(AF_UNIX) && !defined(PYOS_OS2) case AF_UNIX: { struct sockaddr_un *a = (struct sockaddr_un *) addr; return PyString_FromString(a->sun_path); } #endif /* AF_UNIX */ #ifdef ENABLE_IPV6 case AF_INET6: { struct sockaddr_in6 *a; PyObject *addrobj = makeipaddr(addr, sizeof(*a)); PyObject *ret = NULL; if (addrobj) { a = (struct sockaddr_in6 *)addr; ret = Py_BuildValue("Oiii", addrobj, ntohs(a->sin6_port), a->sin6_flowinfo, a->sin6_scope_id); Py_DECREF(addrobj); } return ret; } #endif #ifdef HAVE_NETPACKET_PACKET_H case AF_PACKET: { struct sockaddr_ll *a = (struct sockaddr_ll *)addr; char *ifname = ""; struct ifreq ifr; /* need to look up interface name give index */ if (a->sll_ifindex) { ifr.ifr_ifindex = a->sll_ifindex; if (ioctl(sockfd, SIOCGIFNAME, &ifr) == 0) ifname = ifr.ifr_name; } return Py_BuildValue("shbhs#", ifname, ntohs(a->sll_protocol), a->sll_pkttype, a->sll_hatype, a->sll_addr, a->sll_halen); } #endif /* More cases here... */ default: /* If we don't know the address family, don't raise an exception -- return it as a tuple. */ return Py_BuildValue("is#", addr->sa_family, addr->sa_data, sizeof(addr->sa_data)); } } /* Parse a socket address argument according to the socket object's address family. Return 1 if the address was in the proper format, 0 of not. The address is returned through addr_ret, its length through len_ret. */ static int getsockaddrarg(PySocketSockObject *s, PyObject *args, struct sockaddr **addr_ret, int *len_ret) { switch (s->sock_family) { #if defined(AF_UNIX) && !defined(PYOS_OS2) case AF_UNIX: { struct sockaddr_un* addr; char *path; int len; addr = (struct sockaddr_un*)&(s->sock_addr).un; if (!PyArg_Parse(args, "t#", &path, &len)) return 0; if (len > sizeof addr->sun_path) { PyErr_SetString(socket_error, "AF_UNIX path too long"); return 0; } addr->sun_family = s->sock_family; memcpy(addr->sun_path, path, len); addr->sun_path[len] = 0; *addr_ret = (struct sockaddr *) addr; *len_ret = len + sizeof(*addr) - sizeof(addr->sun_path); return 1; } #endif /* AF_UNIX */ case AF_INET: { struct sockaddr_in* addr; char *host; int port, result; addr=(struct sockaddr_in*)&(s->sock_addr).in; if (!PyTuple_Check(args)) { PyErr_Format( PyExc_TypeError, "getsockaddrarg: " "AF_INET address must be tuple, not %.500s", args->ob_type->tp_name); return 0; } if (!PyArg_ParseTuple(args, "eti:getsockaddrarg", "idna", &host, &port)) return 0; result = setipaddr(host, (struct sockaddr *)addr, sizeof(*addr), AF_INET); PyMem_Free(host); if (result < 0) return 0; addr->sin_family = AF_INET; addr->sin_port = htons((short)port); *addr_ret = (struct sockaddr *) addr; *len_ret = sizeof *addr; return 1; } #ifdef ENABLE_IPV6 case AF_INET6: { struct sockaddr_in6* addr; char *host; int port, flowinfo, scope_id, result; addr = (struct sockaddr_in6*)&(s->sock_addr).in6; flowinfo = scope_id = 0; if (!PyArg_ParseTuple(args, "eti|ii", "idna", &host, &port, &flowinfo, &scope_id)) { return 0; } result = setipaddr(host, (struct sockaddr *)addr, sizeof(*addr), AF_INET6); PyMem_Free(host); if (result < 0) return 0; addr->sin6_family = s->sock_family; addr->sin6_port = htons((short)port); addr->sin6_flowinfo = flowinfo; addr->sin6_scope_id = scope_id; *addr_ret = (struct sockaddr *) addr; *len_ret = sizeof *addr; return 1; } #endif #ifdef HAVE_NETPACKET_PACKET_H case AF_PACKET: { struct sockaddr_ll* addr; struct ifreq ifr; char *interfaceName; int protoNumber; int hatype = 0; int pkttype = 0; char *haddr; if (!PyArg_ParseTuple(args, "si|iis", &interfaceName, &protoNumber, &pkttype, &hatype, &haddr)) return 0; strncpy(ifr.ifr_name, interfaceName, sizeof(ifr.ifr_name)); ifr.ifr_name[(sizeof(ifr.ifr_name))-1] = '\0'; if (ioctl(s->sock_fd, SIOCGIFINDEX, &ifr) < 0) { s->errorhandler(); return 0; } addr = &(s->sock_addr.ll); addr->sll_family = AF_PACKET; addr->sll_protocol = htons((short)protoNumber); addr->sll_ifindex = ifr.ifr_ifindex; addr->sll_pkttype = pkttype; addr->sll_hatype = hatype; *addr_ret = (struct sockaddr *) addr; *len_ret = sizeof *addr; return 1; } #endif /* More cases here... */ default: PyErr_SetString(socket_error, "getsockaddrarg: bad family"); return 0; } } /* Get the address length according to the socket object's address family. Return 1 if the family is known, 0 otherwise. The length is returned through len_ret. */ static int getsockaddrlen(PySocketSockObject *s, socklen_t *len_ret) { switch (s->sock_family) { #if defined(AF_UNIX) && !defined(PYOS_OS2) case AF_UNIX: { *len_ret = sizeof (struct sockaddr_un); return 1; } #endif /* AF_UNIX */ case AF_INET: { *len_ret = sizeof (struct sockaddr_in); return 1; } #ifdef ENABLE_IPV6 case AF_INET6: { *len_ret = sizeof (struct sockaddr_in6); return 1; } #endif #ifdef HAVE_NETPACKET_PACKET_H case AF_PACKET: { *len_ret = sizeof (struct sockaddr_ll); return 1; } #endif /* More cases here... */ default: PyErr_SetString(socket_error, "getsockaddrlen: bad family"); return 0; } } /* s.accept() method */ static PyObject * sock_accept(PySocketSockObject *s) { char addrbuf[256]; SOCKET_T newfd; socklen_t addrlen; PyObject *sock = NULL; PyObject *addr = NULL; PyObject *res = NULL; int timeout; if (!getsockaddrlen(s, &addrlen)) return NULL; memset(addrbuf, 0, addrlen); #ifdef MS_WINDOWS newfd = INVALID_SOCKET; #else newfd = -1; #endif Py_BEGIN_ALLOW_THREADS timeout = internal_select(s, 0); if (!timeout) newfd = accept(s->sock_fd, (struct sockaddr *) addrbuf, &addrlen); Py_END_ALLOW_THREADS if (timeout) { PyErr_SetString(socket_timeout, "timed out"); return NULL; } #ifdef MS_WINDOWS if (newfd == INVALID_SOCKET) #else if (newfd < 0) #endif return s->errorhandler(); /* Create the new object with unspecified family, to avoid calls to bind() etc. on it. */ sock = (PyObject *) new_sockobject(newfd, s->sock_family, s->sock_type, s->sock_proto); if (sock == NULL) { SOCKETCLOSE(newfd); goto finally; } addr = makesockaddr(s->sock_fd, (struct sockaddr *)addrbuf, addrlen); if (addr == NULL) goto finally; res = PyTuple_Pack(2, sock, addr); finally: Py_XDECREF(sock); Py_XDECREF(addr); return res; } PyDoc_STRVAR(accept_doc, "accept() -> (socket object, address info)\n\ \n\ Wait for an incoming connection. Return a new socket representing the\n\ connection, and the address of the client. For IP sockets, the address\n\ info is a pair (hostaddr, port)."); /* s.setblocking(flag) method. Argument: False -- non-blocking mode; same as settimeout(0) True -- blocking mode; same as settimeout(None) */ static PyObject * sock_setblocking(PySocketSockObject *s, PyObject *arg) { int block; block = PyInt_AsLong(arg); if (block == -1 && PyErr_Occurred()) return NULL; s->sock_timeout = block ? -1.0 : 0.0; internal_setblocking(s, block); Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(setblocking_doc, "setblocking(flag)\n\ \n\ Set the socket to blocking (flag is true) or non-blocking (false).\n\ setblocking(True) is equivalent to settimeout(None);\n\ setblocking(False) is equivalent to settimeout(0.0)."); /* s.settimeout(timeout) method. Argument: None -- no timeout, blocking mode; same as setblocking(True) 0.0 -- non-blocking mode; same as setblocking(False) > 0 -- timeout mode; operations time out after timeout seconds < 0 -- illegal; raises an exception */ static PyObject * sock_settimeout(PySocketSockObject *s, PyObject *arg) { double timeout; if (arg == Py_None) timeout = -1.0; else { timeout = PyFloat_AsDouble(arg); if (timeout < 0.0) { if (!PyErr_Occurred()) PyErr_SetString(PyExc_ValueError, "Timeout value out of range"); return NULL; } } s->sock_timeout = timeout; internal_setblocking(s, timeout < 0.0); Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(settimeout_doc, "settimeout(timeout)\n\ \n\ Set a timeout on socket operations. 'timeout' can be a float,\n\ giving in seconds, or None. Setting a timeout of None disables\n\ the timeout feature and is equivalent to setblocking(1).\n\ Setting a timeout of zero is the same as setblocking(0)."); /* s.gettimeout() method. Returns the timeout associated with a socket. */ static PyObject * sock_gettimeout(PySocketSockObject *s) { if (s->sock_timeout < 0.0) { Py_INCREF(Py_None); return Py_None; } else return PyFloat_FromDouble(s->sock_timeout); } PyDoc_STRVAR(gettimeout_doc, "gettimeout() -> timeout\n\ \n\ Returns the timeout in floating seconds associated with socket \n\ operations. A timeout of None indicates that timeouts on socket \n\ operations are disabled."); #ifdef RISCOS /* s.sleeptaskw(1 | 0) method */ static PyObject * sock_sleeptaskw(PySocketSockObject *s,PyObject *arg) { int block; block = PyInt_AsLong(arg); if (block == -1 && PyErr_Occurred()) return NULL; Py_BEGIN_ALLOW_THREADS socketioctl(s->sock_fd, 0x80046679, (u_long*)&block); Py_END_ALLOW_THREADS Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(sleeptaskw_doc, "sleeptaskw(flag)\n\ \n\ Allow sleeps in taskwindows."); #endif /* s.setsockopt() method. With an integer third argument, sets an integer option. With a string third argument, sets an option from a buffer; use optional built-in module 'struct' to encode the string. */ static PyObject * sock_setsockopt(PySocketSockObject *s, PyObject *args) { int level; int optname; int res; char *buf; int buflen; int flag; if (PyArg_ParseTuple(args, "iii:setsockopt", &level, &optname, &flag)) { buf = (char *) &flag; buflen = sizeof flag; } else { PyErr_Clear(); if (!PyArg_ParseTuple(args, "iis#:setsockopt", &level, &optname, &buf, &buflen)) return NULL; } res = setsockopt(s->sock_fd, level, optname, (void *)buf, buflen); if (res < 0) return s->errorhandler(); Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(setsockopt_doc, "setsockopt(level, option, value)\n\ \n\ Set a socket option. See the Unix manual for level and option.\n\ The value argument can either be an integer or a string."); /* s.getsockopt() method. With two arguments, retrieves an integer option. With a third integer argument, retrieves a string buffer of that size; use optional built-in module 'struct' to decode the string. */ static PyObject * sock_getsockopt(PySocketSockObject *s, PyObject *args) { int level; int optname; int res; PyObject *buf; socklen_t buflen = 0; #ifdef __BEOS__ /* We have incomplete socket support. */ PyErr_SetString(socket_error, "getsockopt not supported"); return NULL; #else if (!PyArg_ParseTuple(args, "ii|i:getsockopt", &level, &optname, &buflen)) return NULL; if (buflen == 0) { int flag = 0; socklen_t flagsize = sizeof flag; res = getsockopt(s->sock_fd, level, optname, (void *)&flag, &flagsize); if (res < 0) return s->errorhandler(); return PyInt_FromLong(flag); } #ifdef __VMS if (buflen > 1024) { #else if (buflen <= 0 || buflen > 1024) { #endif PyErr_SetString(socket_error, "getsockopt buflen out of range"); return NULL; } buf = PyString_FromStringAndSize((char *)NULL, buflen); if (buf == NULL) return NULL; res = getsockopt(s->sock_fd, level, optname, (void *)PyString_AS_STRING(buf), &buflen); if (res < 0) { Py_DECREF(buf); return s->errorhandler(); } _PyString_Resize(&buf, buflen); return buf; #endif /* __BEOS__ */ } PyDoc_STRVAR(getsockopt_doc, "getsockopt(level, option[, buffersize]) -> value\n\ \n\ Get a socket option. See the Unix manual for level and option.\n\ If a nonzero buffersize argument is given, the return value is a\n\ string of that length; otherwise it is an integer."); /* s.bind(sockaddr) method */ static PyObject * sock_bind(PySocketSockObject *s, PyObject *addro) { struct sockaddr *addr; int addrlen; int res; if (!getsockaddrarg(s, addro, &addr, &addrlen)) return NULL; Py_BEGIN_ALLOW_THREADS res = bind(s->sock_fd, addr, addrlen); Py_END_ALLOW_THREADS if (res < 0) return s->errorhandler(); Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(bind_doc, "bind(address)\n\ \n\ Bind the socket to a local address. For IP sockets, the address is a\n\ pair (host, port); the host must refer to the local host. For raw packet\n\ sockets the address is a tuple (ifname, proto [,pkttype [,hatype]])"); /* s.close() method. Set the file descriptor to -1 so operations tried subsequently will surely fail. */ static PyObject * sock_close(PySocketSockObject *s) { SOCKET_T fd; if ((fd = s->sock_fd) != -1) { s->sock_fd = -1; Py_BEGIN_ALLOW_THREADS (void) SOCKETCLOSE(fd); Py_END_ALLOW_THREADS } Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(close_doc, "close()\n\ \n\ Close the socket. It cannot be used after this call."); static int internal_connect(PySocketSockObject *s, struct sockaddr *addr, int addrlen, int *timeoutp) { int res, timeout; timeout = 0; res = connect(s->sock_fd, addr, addrlen); #ifdef MS_WINDOWS if (s->sock_timeout > 0.0) { if (res < 0 && WSAGetLastError() == WSAEWOULDBLOCK) { /* This is a mess. Best solution: trust select */ fd_set fds; struct timeval tv; tv.tv_sec = (int)s->sock_timeout; tv.tv_usec = (int)((s->sock_timeout - tv.tv_sec) * 1e6); FD_ZERO(&fds); FD_SET(s->sock_fd, &fds); res = select(s->sock_fd+1, NULL, &fds, NULL, &tv); if (res == 0) { res = WSAEWOULDBLOCK; timeout = 1; } else if (res > 0) res = 0; /* else if (res < 0) an error occurred */ } } if (res < 0) res = WSAGetLastError(); #else if (s->sock_timeout > 0.0) { if (res < 0 && errno == EINPROGRESS) { timeout = internal_select(s, 1); res = connect(s->sock_fd, addr, addrlen); if (res < 0 && errno == EISCONN) res = 0; } } if (res < 0) res = errno; #endif *timeoutp = timeout; return res; } /* s.connect(sockaddr) method */ static PyObject * sock_connect(PySocketSockObject *s, PyObject *addro) { struct sockaddr *addr; int addrlen; int res; int timeout; if (!getsockaddrarg(s, addro, &addr, &addrlen)) return NULL; Py_BEGIN_ALLOW_THREADS res = internal_connect(s, addr, addrlen, &timeout); Py_END_ALLOW_THREADS if (timeout) { PyErr_SetString(socket_timeout, "timed out"); return NULL; } if (res != 0) return s->errorhandler(); Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(connect_doc, "connect(address)\n\ \n\ Connect the socket to a remote address. For IP sockets, the address\n\ is a pair (host, port)."); /* s.connect_ex(sockaddr) method */ static PyObject * sock_connect_ex(PySocketSockObject *s, PyObject *addro) { struct sockaddr *addr; int addrlen; int res; int timeout; if (!getsockaddrarg(s, addro, &addr, &addrlen)) return NULL; Py_BEGIN_ALLOW_THREADS res = internal_connect(s, addr, addrlen, &timeout); Py_END_ALLOW_THREADS return PyInt_FromLong((long) res); } PyDoc_STRVAR(connect_ex_doc, "connect_ex(address) -> errno\n\ \n\ This is like connect(address), but returns an error code (the errno value)\n\ instead of raising an exception when an error occurs."); /* s.fileno() method */ static PyObject * sock_fileno(PySocketSockObject *s) { #if SIZEOF_SOCKET_T <= SIZEOF_LONG return PyInt_FromLong((long) s->sock_fd); #else return PyLong_FromLongLong((PY_LONG_LONG)s->sock_fd); #endif } PyDoc_STRVAR(fileno_doc, "fileno() -> integer\n\ \n\ Return the integer file descriptor of the socket."); #ifndef NO_DUP /* s.dup() method */ static PyObject * sock_dup(PySocketSockObject *s) { SOCKET_T newfd; PyObject *sock; newfd = dup(s->sock_fd); if (newfd < 0) return s->errorhandler(); sock = (PyObject *) new_sockobject(newfd, s->sock_family, s->sock_type, s->sock_proto); if (sock == NULL) SOCKETCLOSE(newfd); return sock; } PyDoc_STRVAR(dup_doc, "dup() -> socket object\n\ \n\ Return a new socket object connected to the same system resource."); #endif /* s.getsockname() method */ static PyObject * sock_getsockname(PySocketSockObject *s) { char addrbuf[256]; int res; socklen_t addrlen; if (!getsockaddrlen(s, &addrlen)) return NULL; memset(addrbuf, 0, addrlen); Py_BEGIN_ALLOW_THREADS res = getsockname(s->sock_fd, (struct sockaddr *) addrbuf, &addrlen); Py_END_ALLOW_THREADS if (res < 0) return s->errorhandler(); return makesockaddr(s->sock_fd, (struct sockaddr *) addrbuf, addrlen); } PyDoc_STRVAR(getsockname_doc, "getsockname() -> address info\n\ \n\ Return the address of the local endpoint. For IP sockets, the address\n\ info is a pair (hostaddr, port)."); #ifdef HAVE_GETPEERNAME /* Cray APP doesn't have this :-( */ /* s.getpeername() method */ static PyObject * sock_getpeername(PySocketSockObject *s) { char addrbuf[256]; int res; socklen_t addrlen; if (!getsockaddrlen(s, &addrlen)) return NULL; memset(addrbuf, 0, addrlen); Py_BEGIN_ALLOW_THREADS res = getpeername(s->sock_fd, (struct sockaddr *) addrbuf, &addrlen); Py_END_ALLOW_THREADS if (res < 0) return s->errorhandler(); return makesockaddr(s->sock_fd, (struct sockaddr *) addrbuf, addrlen); } PyDoc_STRVAR(getpeername_doc, "getpeername() -> address info\n\ \n\ Return the address of the remote endpoint. For IP sockets, the address\n\ info is a pair (hostaddr, port)."); #endif /* HAVE_GETPEERNAME */ /* s.listen(n) method */ static PyObject * sock_listen(PySocketSockObject *s, PyObject *arg) { int backlog; int res; backlog = PyInt_AsLong(arg); if (backlog == -1 && PyErr_Occurred()) return NULL; Py_BEGIN_ALLOW_THREADS if (backlog < 1) backlog = 1; res = listen(s->sock_fd, backlog); Py_END_ALLOW_THREADS if (res < 0) return s->errorhandler(); Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(listen_doc, "listen(backlog)\n\ \n\ Enable a server to accept connections. The backlog argument must be at\n\ least 1; it specifies the number of unaccepted connection that the system\n\ will allow before refusing new connections."); #ifndef NO_DUP /* s.makefile(mode) method. Create a new open file object referring to a dupped version of the socket's file descriptor. (The dup() call is necessary so that the open file and socket objects may be closed independent of each other.) The mode argument specifies 'r' or 'w' passed to fdopen(). */ static PyObject * sock_makefile(PySocketSockObject *s, PyObject *args) { extern int fclose(FILE *); char *mode = "r"; int bufsize = -1; #ifdef MS_WIN32 Py_intptr_t fd; #else int fd; #endif FILE *fp; PyObject *f; #ifdef __VMS char *mode_r = "r"; char *mode_w = "w"; #endif if (!PyArg_ParseTuple(args, "|si:makefile", &mode, &bufsize)) return NULL; #ifdef __VMS if (strcmp(mode,"rb") == 0) { mode = mode_r; } else { if (strcmp(mode,"wb") == 0) { mode = mode_w; } } #endif #ifdef MS_WIN32 if (((fd = _open_osfhandle(s->sock_fd, _O_BINARY)) < 0) || ((fd = dup(fd)) < 0) || ((fp = fdopen(fd, mode)) == NULL)) #else if ((fd = dup(s->sock_fd)) < 0 || (fp = fdopen(fd, mode)) == NULL) #endif { if (fd >= 0) SOCKETCLOSE(fd); return s->errorhandler(); } f = PyFile_FromFile(fp, "", mode, fclose); if (f != NULL) PyFile_SetBufSize(f, bufsize); return f; } PyDoc_STRVAR(makefile_doc, "makefile([mode[, buffersize]]) -> file object\n\ \n\ Return a regular file object corresponding to the socket.\n\ The mode and buffersize arguments are as for the built-in open() function."); #endif /* NO_DUP */ /* s.recv(nbytes [,flags]) method */ static PyObject * sock_recv(PySocketSockObject *s, PyObject *args) { int len, n = 0, flags = 0, timeout; PyObject *buf; #ifdef __VMS int read_length; char *read_buf; #endif if (!PyArg_ParseTuple(args, "i|i:recv", &len, &flags)) return NULL; if (len < 0) { PyErr_SetString(PyExc_ValueError, "negative buffersize in recv"); return NULL; } buf = PyString_FromStringAndSize((char *) 0, len); if (buf == NULL) return NULL; #ifndef __VMS Py_BEGIN_ALLOW_THREADS timeout = internal_select(s, 0); if (!timeout) n = recv(s->sock_fd, PyString_AS_STRING(buf), len, flags); Py_END_ALLOW_THREADS if (timeout) { Py_DECREF(buf); PyErr_SetString(socket_timeout, "timed out"); return NULL; } if (n < 0) { Py_DECREF(buf); return s->errorhandler(); } if (n != len) _PyString_Resize(&buf, n); #else read_buf = PyString_AsString(buf); read_length = len; while (read_length != 0) { unsigned int segment; segment = read_length /SEGMENT_SIZE; if (segment != 0) { segment = SEGMENT_SIZE; } else { segment = read_length; } Py_BEGIN_ALLOW_THREADS timeout = internal_select(s, 0); if (!timeout) n = recv(s->sock_fd, read_buf, segment, flags); Py_END_ALLOW_THREADS if (timeout) { Py_DECREF(buf); PyErr_SetString(socket_timeout, "timed out"); return NULL; } if (n < 0) { Py_DECREF(buf); return s->errorhandler(); } if (n != read_length) { read_buf += n; break; } read_length -= segment; read_buf += segment; } if (_PyString_Resize(&buf, (read_buf - PyString_AsString(buf))) < 0) { return NULL; } #endif /* !__VMS */ return buf; } PyDoc_STRVAR(recv_doc, "recv(buffersize[, flags]) -> data\n\ \n\ Receive up to buffersize bytes from the socket. For the optional flags\n\ argument, see the Unix manual. When no data is available, block until\n\ at least one byte is available or until the remote end is closed. When\n\ the remote end is closed and all data is read, return the empty string."); /* s.recvfrom(nbytes [,flags]) method */ static PyObject * sock_recvfrom(PySocketSockObject *s, PyObject *args) { char addrbuf[256]; PyObject *buf = NULL; PyObject *addr = NULL; PyObject *ret = NULL; int len, n = 0, flags = 0, timeout; socklen_t addrlen; if (!PyArg_ParseTuple(args, "i|i:recvfrom", &len, &flags)) return NULL; if (!getsockaddrlen(s, &addrlen)) return NULL; buf = PyString_FromStringAndSize((char *) 0, len); if (buf == NULL) return NULL; Py_BEGIN_ALLOW_THREADS memset(addrbuf, 0, addrlen); timeout = internal_select(s, 0); if (!timeout) n = recvfrom(s->sock_fd, PyString_AS_STRING(buf), len, flags, #ifndef MS_WINDOWS #if defined(PYOS_OS2) && !defined(PYCC_GCC) (struct sockaddr *)addrbuf, &addrlen #else (void *)addrbuf, &addrlen #endif #else (struct sockaddr *)addrbuf, &addrlen #endif ); Py_END_ALLOW_THREADS if (timeout) { Py_DECREF(buf); PyErr_SetString(socket_timeout, "timed out"); return NULL; } if (n < 0) { Py_DECREF(buf); return s->errorhandler(); } if (n != len && _PyString_Resize(&buf, n) < 0) return NULL; if (!(addr = makesockaddr(s->sock_fd, (struct sockaddr *)addrbuf, addrlen))) goto finally; ret = PyTuple_Pack(2, buf, addr); finally: Py_XDECREF(addr); Py_XDECREF(buf); return ret; } PyDoc_STRVAR(recvfrom_doc, "recvfrom(buffersize[, flags]) -> (data, address info)\n\ \n\ Like recv(buffersize, flags) but also return the sender's address info."); /* s.send(data [,flags]) method */ static PyObject * sock_send(PySocketSockObject *s, PyObject *args) { char *buf; int len, n = 0, flags = 0, timeout; #ifdef __VMS int send_length; #endif if (!PyArg_ParseTuple(args, "s#|i:send", &buf, &len, &flags)) return NULL; #ifndef __VMS Py_BEGIN_ALLOW_THREADS timeout = internal_select(s, 1); if (!timeout) n = send(s->sock_fd, buf, len, flags); Py_END_ALLOW_THREADS if (timeout) { PyErr_SetString(socket_timeout, "timed out"); return NULL; } if (n < 0) return s->errorhandler(); #else /* Divide packet into smaller segments for */ /* TCP/IP Services for OpenVMS */ send_length = len; while (send_length != 0) { unsigned int segment; segment = send_length / SEGMENT_SIZE; if (segment != 0) { segment = SEGMENT_SIZE; } else { segment = send_length; } Py_BEGIN_ALLOW_THREADS timeout = internal_select(s, 1); if (!timeout) n = send(s->sock_fd, buf, segment, flags); Py_END_ALLOW_THREADS if (timeout) { PyErr_SetString(socket_timeout, "timed out"); return NULL; } if (n < 0) { return s->errorhandler(); } send_length -= segment; buf += segment; } /* end while */ #endif /* !__VMS */ return PyInt_FromLong((long)n); } PyDoc_STRVAR(send_doc, "send(data[, flags]) -> count\n\ \n\ Send a data string to the socket. For the optional flags\n\ argument, see the Unix manual. Return the number of bytes\n\ sent; this may be less than len(data) if the network is busy."); /* s.sendall(data [,flags]) method */ static PyObject * sock_sendall(PySocketSockObject *s, PyObject *args) { char *buf; int len, n = 0, flags = 0, timeout; if (!PyArg_ParseTuple(args, "s#|i:sendall", &buf, &len, &flags)) return NULL; Py_BEGIN_ALLOW_THREADS do { timeout = internal_select(s, 1); if (timeout) break; n = send(s->sock_fd, buf, len, flags); if (n < 0) break; buf += n; len -= n; } while (len > 0); Py_END_ALLOW_THREADS if (timeout) { PyErr_SetString(socket_timeout, "timed out"); return NULL; } if (n < 0) return s->errorhandler(); Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(sendall_doc, "sendall(data[, flags])\n\ \n\ Send a data string to the socket. For the optional flags\n\ argument, see the Unix manual. This calls send() repeatedly\n\ until all data is sent. If an error occurs, it's impossible\n\ to tell how much data has been sent."); /* s.sendto(data, [flags,] sockaddr) method */ static PyObject * sock_sendto(PySocketSockObject *s, PyObject *args) { PyObject *addro; char *buf; struct sockaddr *addr; int addrlen, len, n = 0, flags, timeout; flags = 0; if (!PyArg_ParseTuple(args, "s#O:sendto", &buf, &len, &addro)) { PyErr_Clear(); if (!PyArg_ParseTuple(args, "s#iO:sendto", &buf, &len, &flags, &addro)) return NULL; } if (!getsockaddrarg(s, addro, &addr, &addrlen)) return NULL; Py_BEGIN_ALLOW_THREADS timeout = internal_select(s, 1); if (!timeout) n = sendto(s->sock_fd, buf, len, flags, addr, addrlen); Py_END_ALLOW_THREADS if (timeout) { PyErr_SetString(socket_timeout, "timed out"); return NULL; } if (n < 0) return s->errorhandler(); return PyInt_FromLong((long)n); } PyDoc_STRVAR(sendto_doc, "sendto(data[, flags], address) -> count\n\ \n\ Like send(data, flags) but allows specifying the destination address.\n\ For IP sockets, the address is a pair (hostaddr, port)."); /* s.shutdown(how) method */ static PyObject * sock_shutdown(PySocketSockObject *s, PyObject *arg) { int how; int res; how = PyInt_AsLong(arg); if (how == -1 && PyErr_Occurred()) return NULL; Py_BEGIN_ALLOW_THREADS res = shutdown(s->sock_fd, how); Py_END_ALLOW_THREADS if (res < 0) return s->errorhandler(); Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(shutdown_doc, "shutdown(flag)\n\ \n\ Shut down the reading side of the socket (flag == SHUT_RD), the writing side\n\ of the socket (flag == SHUT_WR), or both ends (flag == SHUT_RDWR)."); /* List of methods for socket objects */ static PyMethodDef sock_methods[] = { {"accept", (PyCFunction)sock_accept, METH_NOARGS, accept_doc}, {"bind", (PyCFunction)sock_bind, METH_O, bind_doc}, {"close", (PyCFunction)sock_close, METH_NOARGS, close_doc}, {"connect", (PyCFunction)sock_connect, METH_O, connect_doc}, {"connect_ex", (PyCFunction)sock_connect_ex, METH_O, connect_ex_doc}, #ifndef NO_DUP {"dup", (PyCFunction)sock_dup, METH_NOARGS, dup_doc}, #endif {"fileno", (PyCFunction)sock_fileno, METH_NOARGS, fileno_doc}, #ifdef HAVE_GETPEERNAME {"getpeername", (PyCFunction)sock_getpeername, METH_NOARGS, getpeername_doc}, #endif {"getsockname", (PyCFunction)sock_getsockname, METH_NOARGS, getsockname_doc}, {"getsockopt", (PyCFunction)sock_getsockopt, METH_VARARGS, getsockopt_doc}, {"listen", (PyCFunction)sock_listen, METH_O, listen_doc}, #ifndef NO_DUP {"makefile", (PyCFunction)sock_makefile, METH_VARARGS, makefile_doc}, #endif {"recv", (PyCFunction)sock_recv, METH_VARARGS, recv_doc}, {"recvfrom", (PyCFunction)sock_recvfrom, METH_VARARGS, recvfrom_doc}, {"send", (PyCFunction)sock_send, METH_VARARGS, send_doc}, {"sendall", (PyCFunction)sock_sendall, METH_VARARGS, sendall_doc}, {"sendto", (PyCFunction)sock_sendto, METH_VARARGS, sendto_doc}, {"setblocking", (PyCFunction)sock_setblocking, METH_O, setblocking_doc}, {"settimeout", (PyCFunction)sock_settimeout, METH_O, settimeout_doc}, {"gettimeout", (PyCFunction)sock_gettimeout, METH_NOARGS, gettimeout_doc}, {"setsockopt", (PyCFunction)sock_setsockopt, METH_VARARGS, setsockopt_doc}, {"shutdown", (PyCFunction)sock_shutdown, METH_O, shutdown_doc}, #ifdef RISCOS {"sleeptaskw", (PyCFunction)sock_sleeptaskw, METH_O, sleeptaskw_doc}, #endif {NULL, NULL} /* sentinel */ }; /* Deallocate a socket object in response to the last Py_DECREF(). First close the file description. */ static void sock_dealloc(PySocketSockObject *s) { if (s->sock_fd != -1) (void) SOCKETCLOSE(s->sock_fd); s->ob_type->tp_free((PyObject *)s); } static PyObject * sock_repr(PySocketSockObject *s) { char buf[512]; #if SIZEOF_SOCKET_T > SIZEOF_LONG if (s->sock_fd > LONG_MAX) { /* this can occur on Win64, and actually there is a special ugly printf formatter for decimal pointer length integer printing, only bother if necessary*/ PyErr_SetString(PyExc_OverflowError, "no printf formatter to display " "the socket descriptor in decimal"); return NULL; } #endif PyOS_snprintf( buf, sizeof(buf), "", (long)s->sock_fd, s->sock_family, s->sock_type, s->sock_proto); return PyString_FromString(buf); } /* Create a new, uninitialized socket object. */ static PyObject * sock_new(PyTypeObject *type, PyObject *args, PyObject *kwds) { PyObject *new; new = type->tp_alloc(type, 0); if (new != NULL) { ((PySocketSockObject *)new)->sock_fd = -1; ((PySocketSockObject *)new)->sock_timeout = -1.0; ((PySocketSockObject *)new)->errorhandler = &set_error; } return new; } /* Initialize a new socket object. */ /*ARGSUSED*/ static int sock_initobj(PyObject *self, PyObject *args, PyObject *kwds) { PySocketSockObject *s = (PySocketSockObject *)self; SOCKET_T fd; int family = AF_INET, type = SOCK_STREAM, proto = 0; static char *keywords[] = {"family", "type", "proto", 0}; if (!PyArg_ParseTupleAndKeywords(args, kwds, "|iii:socket", keywords, &family, &type, &proto)) return -1; Py_BEGIN_ALLOW_THREADS fd = socket(family, type, proto); Py_END_ALLOW_THREADS #ifdef MS_WINDOWS if (fd == INVALID_SOCKET) #else if (fd < 0) #endif { set_error(); return -1; } init_sockobject(s, fd, family, type, proto); /* From now on, ignore SIGPIPE and let the error checking do the work. */ #ifdef SIGPIPE (void) signal(SIGPIPE, SIG_IGN); #endif return 0; } /* Type object for socket objects. */ static PyTypeObject sock_type = { PyObject_HEAD_INIT(0) /* Must fill in type value later */ 0, /* ob_size */ "_socket.socket", /* tp_name */ sizeof(PySocketSockObject), /* tp_basicsize */ 0, /* tp_itemsize */ (destructor)sock_dealloc, /* tp_dealloc */ 0, /* tp_print */ 0, /* tp_getattr */ 0, /* tp_setattr */ 0, /* tp_compare */ (reprfunc)sock_repr, /* tp_repr */ 0, /* tp_as_number */ 0, /* tp_as_sequence */ 0, /* tp_as_mapping */ 0, /* tp_hash */ 0, /* tp_call */ 0, /* tp_str */ PyObject_GenericGetAttr, /* tp_getattro */ 0, /* tp_setattro */ 0, /* tp_as_buffer */ Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /* tp_flags */ sock_doc, /* tp_doc */ 0, /* tp_traverse */ 0, /* tp_clear */ 0, /* tp_richcompare */ 0, /* tp_weaklistoffset */ 0, /* tp_iter */ 0, /* tp_iternext */ sock_methods, /* tp_methods */ 0, /* tp_members */ 0, /* tp_getset */ 0, /* tp_base */ 0, /* tp_dict */ 0, /* tp_descr_get */ 0, /* tp_descr_set */ 0, /* tp_dictoffset */ sock_initobj, /* tp_init */ PyType_GenericAlloc, /* tp_alloc */ sock_new, /* tp_new */ PyObject_Del, /* tp_free */ }; /* Python interface to gethostname(). */ /*ARGSUSED*/ static PyObject * socket_gethostname(PyObject *self, PyObject *args) { char buf[1024]; int res; if (!PyArg_ParseTuple(args, ":gethostname")) return NULL; Py_BEGIN_ALLOW_THREADS res = gethostname(buf, (int) sizeof buf - 1); Py_END_ALLOW_THREADS if (res < 0) return set_error(); buf[sizeof buf - 1] = '\0'; return PyString_FromString(buf); } PyDoc_STRVAR(gethostname_doc, "gethostname() -> string\n\ \n\ Return the current host name."); /* Python interface to gethostbyname(name). */ /*ARGSUSED*/ static PyObject * socket_gethostbyname(PyObject *self, PyObject *args) { char *name; #ifdef ENABLE_IPV6 struct sockaddr_storage addrbuf; #else struct sockaddr_in addrbuf; #endif if (!PyArg_ParseTuple(args, "s:gethostbyname", &name)) return NULL; if (setipaddr(name, (struct sockaddr *)&addrbuf, sizeof(addrbuf), AF_INET) < 0) return NULL; return makeipaddr((struct sockaddr *)&addrbuf, sizeof(struct sockaddr_in)); } PyDoc_STRVAR(gethostbyname_doc, "gethostbyname(host) -> address\n\ \n\ Return the IP address (a string of the form '255.255.255.255') for a host."); /* Convenience function common to gethostbyname_ex and gethostbyaddr */ static PyObject * gethost_common(struct hostent *h, struct sockaddr *addr, int alen, int af) { char **pch; PyObject *rtn_tuple = (PyObject *)NULL; PyObject *name_list = (PyObject *)NULL; PyObject *addr_list = (PyObject *)NULL; PyObject *tmp; if (h == NULL) { /* Let's get real error message to return */ #ifndef RISCOS set_herror(h_errno); #else PyErr_SetString(socket_error, "host not found"); #endif return NULL; } if (h->h_addrtype != af) { #ifdef HAVE_STRERROR /* Let's get real error message to return */ PyErr_SetString(socket_error, (char *)strerror(EAFNOSUPPORT)); #else PyErr_SetString( socket_error, "Address family not supported by protocol family"); #endif return NULL; } switch (af) { case AF_INET: if (alen < sizeof(struct sockaddr_in)) return NULL; break; #ifdef ENABLE_IPV6 case AF_INET6: if (alen < sizeof(struct sockaddr_in6)) return NULL; break; #endif } if ((name_list = PyList_New(0)) == NULL) goto err; if ((addr_list = PyList_New(0)) == NULL) goto err; for (pch = h->h_aliases; *pch != NULL; pch++) { int status; tmp = PyString_FromString(*pch); if (tmp == NULL) goto err; status = PyList_Append(name_list, tmp); Py_DECREF(tmp); if (status) goto err; } for (pch = h->h_addr_list; *pch != NULL; pch++) { int status; switch (af) { case AF_INET: { struct sockaddr_in sin; memset(&sin, 0, sizeof(sin)); sin.sin_family = af; #ifdef HAVE_SOCKADDR_SA_LEN sin.sin_len = sizeof(sin); #endif memcpy(&sin.sin_addr, *pch, sizeof(sin.sin_addr)); tmp = makeipaddr((struct sockaddr *)&sin, sizeof(sin)); if (pch == h->h_addr_list && alen >= sizeof(sin)) memcpy((char *) addr, &sin, sizeof(sin)); break; } #ifdef ENABLE_IPV6 case AF_INET6: { struct sockaddr_in6 sin6; memset(&sin6, 0, sizeof(sin6)); sin6.sin6_family = af; #ifdef HAVE_SOCKADDR_SA_LEN sin6.sin6_len = sizeof(sin6); #endif memcpy(&sin6.sin6_addr, *pch, sizeof(sin6.sin6_addr)); tmp = makeipaddr((struct sockaddr *)&sin6, sizeof(sin6)); if (pch == h->h_addr_list && alen >= sizeof(sin6)) memcpy((char *) addr, &sin6, sizeof(sin6)); break; } #endif default: /* can't happen */ PyErr_SetString(socket_error, "unsupported address family"); return NULL; } if (tmp == NULL) goto err; status = PyList_Append(addr_list, tmp); Py_DECREF(tmp); if (status) goto err; } rtn_tuple = Py_BuildValue("sOO", h->h_name, name_list, addr_list); err: Py_XDECREF(name_list); Py_XDECREF(addr_list); return rtn_tuple; } /* Python interface to gethostbyname_ex(name). */ /*ARGSUSED*/ static PyObject * socket_gethostbyname_ex(PyObject *self, PyObject *args) { char *name; struct hostent *h; #ifdef ENABLE_IPV6 struct sockaddr_storage addr; #else struct sockaddr_in addr; #endif struct sockaddr *sa; PyObject *ret; #ifdef HAVE_GETHOSTBYNAME_R struct hostent hp_allocated; #ifdef HAVE_GETHOSTBYNAME_R_3_ARG struct hostent_data data; #else char buf[16384]; int buf_len = (sizeof buf) - 1; int errnop; #endif #if defined(HAVE_GETHOSTBYNAME_R_3_ARG) || defined(HAVE_GETHOSTBYNAME_R_6_ARG) int result; #endif #endif /* HAVE_GETHOSTBYNAME_R */ if (!PyArg_ParseTuple(args, "s:gethostbyname_ex", &name)) return NULL; if (setipaddr(name, (struct sockaddr *)&addr, sizeof(addr), AF_INET) < 0) return NULL; Py_BEGIN_ALLOW_THREADS #ifdef HAVE_GETHOSTBYNAME_R #if defined(HAVE_GETHOSTBYNAME_R_6_ARG) result = gethostbyname_r(name, &hp_allocated, buf, buf_len, &h, &errnop); #elif defined(HAVE_GETHOSTBYNAME_R_5_ARG) h = gethostbyname_r(name, &hp_allocated, buf, buf_len, &errnop); #else /* HAVE_GETHOSTBYNAME_R_3_ARG */ memset((void *) &data, '\0', sizeof(data)); result = gethostbyname_r(name, &hp_allocated, &data); h = (result != 0) ? NULL : &hp_allocated; #endif #else /* not HAVE_GETHOSTBYNAME_R */ #ifdef USE_GETHOSTBYNAME_LOCK PyThread_acquire_lock(netdb_lock, 1); #endif h = gethostbyname(name); #endif /* HAVE_GETHOSTBYNAME_R */ Py_END_ALLOW_THREADS /* Some C libraries would require addr.__ss_family instead of addr.ss_family. Therefore, we cast the sockaddr_storage into sockaddr to access sa_family. */ sa = (struct sockaddr*)&addr; ret = gethost_common(h, (struct sockaddr *)&addr, sizeof(addr), sa->sa_family); #ifdef USE_GETHOSTBYNAME_LOCK PyThread_release_lock(netdb_lock); #endif return ret; } PyDoc_STRVAR(ghbn_ex_doc, "gethostbyname_ex(host) -> (name, aliaslist, addresslist)\n\ \n\ Return the true host name, a list of aliases, and a list of IP addresses,\n\ for a host. The host argument is a string giving a host name or IP number."); /* Python interface to gethostbyaddr(IP). */ /*ARGSUSED*/ static PyObject * socket_gethostbyaddr(PyObject *self, PyObject *args) { #ifdef ENABLE_IPV6 struct sockaddr_storage addr; #else struct sockaddr_in addr; #endif struct sockaddr *sa = (struct sockaddr *)&addr; char *ip_num; struct hostent *h; PyObject *ret; #ifdef HAVE_GETHOSTBYNAME_R struct hostent hp_allocated; #ifdef HAVE_GETHOSTBYNAME_R_3_ARG struct hostent_data data; #else char buf[16384]; int buf_len = (sizeof buf) - 1; int errnop; #endif #if defined(HAVE_GETHOSTBYNAME_R_3_ARG) || defined(HAVE_GETHOSTBYNAME_R_6_ARG) int result; #endif #endif /* HAVE_GETHOSTBYNAME_R */ char *ap; int al; int af; if (!PyArg_ParseTuple(args, "s:gethostbyaddr", &ip_num)) return NULL; af = AF_UNSPEC; if (setipaddr(ip_num, sa, sizeof(addr), af) < 0) return NULL; af = sa->sa_family; ap = NULL; al = 0; switch (af) { case AF_INET: ap = (char *)&((struct sockaddr_in *)sa)->sin_addr; al = sizeof(((struct sockaddr_in *)sa)->sin_addr); break; #ifdef ENABLE_IPV6 case AF_INET6: ap = (char *)&((struct sockaddr_in6 *)sa)->sin6_addr; al = sizeof(((struct sockaddr_in6 *)sa)->sin6_addr); break; #endif default: PyErr_SetString(socket_error, "unsupported address family"); return NULL; } Py_BEGIN_ALLOW_THREADS #ifdef HAVE_GETHOSTBYNAME_R #if defined(HAVE_GETHOSTBYNAME_R_6_ARG) result = gethostbyaddr_r(ap, al, af, &hp_allocated, buf, buf_len, &h, &errnop); #elif defined(HAVE_GETHOSTBYNAME_R_5_ARG) h = gethostbyaddr_r(ap, al, af, &hp_allocated, buf, buf_len, &errnop); #else /* HAVE_GETHOSTBYNAME_R_3_ARG */ memset((void *) &data, '\0', sizeof(data)); result = gethostbyaddr_r(ap, al, af, &hp_allocated, &data); h = (result != 0) ? NULL : &hp_allocated; #endif #else /* not HAVE_GETHOSTBYNAME_R */ #ifdef USE_GETHOSTBYNAME_LOCK PyThread_acquire_lock(netdb_lock, 1); #endif h = gethostbyaddr(ap, al, af); #endif /* HAVE_GETHOSTBYNAME_R */ Py_END_ALLOW_THREADS ret = gethost_common(h, (struct sockaddr *)&addr, sizeof(addr), af); #ifdef USE_GETHOSTBYNAME_LOCK PyThread_release_lock(netdb_lock); #endif return ret; } PyDoc_STRVAR(gethostbyaddr_doc, "gethostbyaddr(host) -> (name, aliaslist, addresslist)\n\ \n\ Return the true host name, a list of aliases, and a list of IP addresses,\n\ for a host. The host argument is a string giving a host name or IP number."); /* Python interface to getservbyname(name). This only returns the port number, since the other info is already known or not useful (like the list of aliases). */ /*ARGSUSED*/ static PyObject * socket_getservbyname(PyObject *self, PyObject *args) { char *name, *proto; struct servent *sp; if (!PyArg_ParseTuple(args, "ss:getservbyname", &name, &proto)) return NULL; Py_BEGIN_ALLOW_THREADS sp = getservbyname(name, proto); Py_END_ALLOW_THREADS if (sp == NULL) { PyErr_SetString(socket_error, "service/proto not found"); return NULL; } return PyInt_FromLong((long) ntohs(sp->s_port)); } PyDoc_STRVAR(getservbyname_doc, "getservbyname(servicename, protocolname) -> integer\n\ \n\ Return a port number from a service name and protocol name.\n\ The protocol name should be 'tcp' or 'udp'."); /* Python interface to getprotobyname(name). This only returns the protocol number, since the other info is already known or not useful (like the list of aliases). */ /*ARGSUSED*/ static PyObject * socket_getprotobyname(PyObject *self, PyObject *args) { char *name; struct protoent *sp; #ifdef __BEOS__ /* Not available in BeOS yet. - [cjh] */ PyErr_SetString(socket_error, "getprotobyname not supported"); return NULL; #else if (!PyArg_ParseTuple(args, "s:getprotobyname", &name)) return NULL; Py_BEGIN_ALLOW_THREADS sp = getprotobyname(name); Py_END_ALLOW_THREADS if (sp == NULL) { PyErr_SetString(socket_error, "protocol not found"); return NULL; } return PyInt_FromLong((long) sp->p_proto); #endif } PyDoc_STRVAR(getprotobyname_doc, "getprotobyname(name) -> integer\n\ \n\ Return the protocol number for the named protocol. (Rarely used.)"); #ifndef NO_DUP /* Create a socket object from a numeric file description. Useful e.g. if stdin is a socket. Additional arguments as for socket(). */ /*ARGSUSED*/ static PyObject * socket_fromfd(PyObject *self, PyObject *args) { PySocketSockObject *s; SOCKET_T fd; int family, type, proto = 0; if (!PyArg_ParseTuple(args, "iii|i:fromfd", &fd, &family, &type, &proto)) return NULL; /* Dup the fd so it and the socket can be closed independently */ fd = dup(fd); if (fd < 0) return set_error(); s = new_sockobject(fd, family, type, proto); /* From now on, ignore SIGPIPE and let the error checking do the work. */ #ifdef SIGPIPE (void) signal(SIGPIPE, SIG_IGN); #endif return (PyObject *) s; } PyDoc_STRVAR(fromfd_doc, "fromfd(fd, family, type[, proto]) -> socket object\n\ \n\ Create a socket object from the given file descriptor.\n\ The remaining arguments are the same as for socket()."); #endif /* NO_DUP */ static PyObject * socket_ntohs(PyObject *self, PyObject *args) { int x1, x2; if (!PyArg_ParseTuple(args, "i:ntohs", &x1)) { return NULL; } x2 = (int)ntohs((short)x1); return PyInt_FromLong(x2); } PyDoc_STRVAR(ntohs_doc, "ntohs(integer) -> integer\n\ \n\ Convert a 16-bit integer from network to host byte order."); static PyObject * socket_ntohl(PyObject *self, PyObject *arg) { unsigned long x; if (PyInt_Check(arg)) { x = PyInt_AS_LONG(arg); if (x == (unsigned long) -1 && PyErr_Occurred()) return NULL; } else if (PyLong_Check(arg)) { x = PyLong_AsUnsignedLong(arg); if (x == (unsigned long) -1 && PyErr_Occurred()) return NULL; #if SIZEOF_LONG > 4 { unsigned long y; /* only want the trailing 32 bits */ y = x & 0xFFFFFFFFUL; if (y ^ x) return PyErr_Format(PyExc_OverflowError, "long int larger than 32 bits"); x = y; } #endif } else return PyErr_Format(PyExc_TypeError, "expected int/long, %s found", arg->ob_type->tp_name); if (x == (unsigned long) -1 && PyErr_Occurred()) return NULL; return PyInt_FromLong(ntohl(x)); } PyDoc_STRVAR(ntohl_doc, "ntohl(integer) -> integer\n\ \n\ Convert a 32-bit integer from network to host byte order."); static PyObject * socket_htons(PyObject *self, PyObject *args) { unsigned long x1, x2; if (!PyArg_ParseTuple(args, "i:htons", &x1)) { return NULL; } x2 = (int)htons((short)x1); return PyInt_FromLong(x2); } PyDoc_STRVAR(htons_doc, "htons(integer) -> integer\n\ \n\ Convert a 16-bit integer from host to network byte order."); static PyObject * socket_htonl(PyObject *self, PyObject *arg) { unsigned long x; if (PyInt_Check(arg)) { x = PyInt_AS_LONG(arg); if (x == (unsigned long) -1 && PyErr_Occurred()) return NULL; } else if (PyLong_Check(arg)) { x = PyLong_AsUnsignedLong(arg); if (x == (unsigned long) -1 && PyErr_Occurred()) return NULL; #if SIZEOF_LONG > 4 { unsigned long y; /* only want the trailing 32 bits */ y = x & 0xFFFFFFFFUL; if (y ^ x) return PyErr_Format(PyExc_OverflowError, "long int larger than 32 bits"); x = y; } #endif } else return PyErr_Format(PyExc_TypeError, "expected int/long, %s found", arg->ob_type->tp_name); return PyInt_FromLong(htonl(x)); } PyDoc_STRVAR(htonl_doc, "htonl(integer) -> integer\n\ \n\ Convert a 32-bit integer from host to network byte order."); /* socket.inet_aton() and socket.inet_ntoa() functions. */ PyDoc_STRVAR(inet_aton_doc, "inet_aton(string) -> packed 32-bit IP representation\n\ \n\ Convert an IP address in string format (123.45.67.89) to the 32-bit packed\n\ binary format used in low-level network functions."); static PyObject* socket_inet_aton(PyObject *self, PyObject *args) { #ifndef INADDR_NONE #define INADDR_NONE (-1) #endif #ifdef HAVE_INET_ATON struct in_addr buf; #else /* Have to use inet_addr() instead */ unsigned long packed_addr; #endif char *ip_addr; if (!PyArg_ParseTuple(args, "s:inet_aton", &ip_addr)) return NULL; #ifdef HAVE_INET_ATON if (inet_aton(ip_addr, &buf)) return PyString_FromStringAndSize((char *)(&buf), sizeof(buf)); PyErr_SetString(socket_error, "illegal IP address string passed to inet_aton"); return NULL; #else /* ! HAVE_INET_ATON */ /* XXX Problem here: inet_aton('255.255.255.255') raises an exception while it should be a valid address. */ packed_addr = inet_addr(ip_addr); if (packed_addr == INADDR_NONE) { /* invalid address */ PyErr_SetString(socket_error, "illegal IP address string passed to inet_aton"); return NULL; } return PyString_FromStringAndSize((char *) &packed_addr, sizeof(packed_addr)); #endif } PyDoc_STRVAR(inet_ntoa_doc, "inet_ntoa(packed_ip) -> ip_address_string\n\ \n\ Convert an IP address from 32-bit packed binary format to string format"); static PyObject* socket_inet_ntoa(PyObject *self, PyObject *args) { char *packed_str; int addr_len; struct in_addr packed_addr; if (!PyArg_ParseTuple(args, "s#:inet_ntoa", &packed_str, &addr_len)) { return NULL; } if (addr_len != sizeof(packed_addr)) { PyErr_SetString(socket_error, "packed IP wrong length for inet_ntoa"); return NULL; } memcpy(&packed_addr, packed_str, addr_len); return PyString_FromString(inet_ntoa(packed_addr)); } #ifdef HAVE_INET_PTON PyDoc_STRVAR(inet_pton_doc, "inet_pton(af, ip) -> packed IP address string\n\ \n\ Convert an IP address from string format to a packed string suitable\n\ for use with low-level network functions."); static PyObject * socket_inet_pton(PyObject *self, PyObject *args) { int af; char* ip; int retval; #ifdef ENABLE_IPV6 char packed[MAX(sizeof(struct in_addr), sizeof(struct in6_addr))]; #else char packed[sizeof(struct in_addr)]; #endif if (!PyArg_ParseTuple(args, "is:inet_pton", &af, &ip)) { return NULL; } #ifndef ENABLE_IPV6 if(af == AF_INET6) { PyErr_SetString(socket_error, "can't use AF_INET6, IPv6 is disabled"); return NULL; } #endif retval = inet_pton(af, ip, packed); if (retval < 0) { PyErr_SetFromErrno(socket_error); return NULL; } else if (retval == 0) { PyErr_SetString(socket_error, "illegal IP address string passed to inet_pton"); return NULL; } else if (af == AF_INET) { return PyString_FromStringAndSize(packed, sizeof(struct in_addr)); #ifdef ENABLE_IPV6 } else if (af == AF_INET6) { return PyString_FromStringAndSize(packed, sizeof(struct in6_addr)); #endif } else { PyErr_SetString(socket_error, "unknown address family"); return NULL; } } PyDoc_STRVAR(inet_ntop_doc, "inet_ntop(af, packed_ip) -> string formatted IP address\n\ \n\ Convert a packed IP address of the given family to string format."); static PyObject * socket_inet_ntop(PyObject *self, PyObject *args) { int af; char* packed; int len; const char* retval; #ifdef ENABLE_IPV6 char ip[MAX(INET_ADDRSTRLEN, INET6_ADDRSTRLEN) + 1]; #else char ip[INET_ADDRSTRLEN + 1]; #endif /* Guarantee NUL-termination for PyString_FromString() below */ memset((void *) &ip[0], '\0', sizeof(ip) + 1); if (!PyArg_ParseTuple(args, "is#:inet_ntop", &af, &packed, &len)) { return NULL; } if (af == AF_INET) { if (len != sizeof(struct in_addr)) { PyErr_SetString(PyExc_ValueError, "invalid length of packed IP address string"); return NULL; } #ifdef ENABLE_IPV6 } else if (af == AF_INET6) { if (len != sizeof(struct in6_addr)) { PyErr_SetString(PyExc_ValueError, "invalid length of packed IP address string"); return NULL; } #endif } else { PyErr_Format(PyExc_ValueError, "unknown address family %d", af); return NULL; } retval = inet_ntop(af, packed, ip, sizeof(ip)); if (!retval) { PyErr_SetFromErrno(socket_error); return NULL; } else { return PyString_FromString(retval); } /* NOTREACHED */ PyErr_SetString(PyExc_RuntimeError, "invalid handling of inet_ntop"); return NULL; } #endif /* HAVE_INET_PTON */ /* Python interface to getaddrinfo(host, port). */ /*ARGSUSED*/ static PyObject * socket_getaddrinfo(PyObject *self, PyObject *args) { struct addrinfo hints, *res; struct addrinfo *res0 = NULL; PyObject *hobj = NULL; PyObject *pobj = (PyObject *)NULL; char pbuf[30]; char *hptr, *pptr; int family, socktype, protocol, flags; int error; PyObject *all = (PyObject *)NULL; PyObject *single = (PyObject *)NULL; PyObject *idna = NULL; family = socktype = protocol = flags = 0; family = AF_UNSPEC; if (!PyArg_ParseTuple(args, "OO|iiii:getaddrinfo", &hobj, &pobj, &family, &socktype, &protocol, &flags)) { return NULL; } if (hobj == Py_None) { hptr = NULL; } else if (PyUnicode_Check(hobj)) { idna = PyObject_CallMethod(hobj, "encode", "s", "idna"); if (!idna) return NULL; hptr = PyString_AsString(idna); } else if (PyString_Check(hobj)) { hptr = PyString_AsString(hobj); } else { PyErr_SetString(PyExc_TypeError, "getaddrinfo() argument 1 must be string or None"); return NULL; } if (PyInt_Check(pobj)) { PyOS_snprintf(pbuf, sizeof(pbuf), "%ld", PyInt_AsLong(pobj)); pptr = pbuf; } else if (PyString_Check(pobj)) { pptr = PyString_AsString(pobj); } else if (pobj == Py_None) { pptr = (char *)NULL; } else { PyErr_SetString(socket_error, "Int or String expected"); goto err; } memset(&hints, 0, sizeof(hints)); hints.ai_family = family; hints.ai_socktype = socktype; hints.ai_protocol = protocol; hints.ai_flags = flags; Py_BEGIN_ALLOW_THREADS ACQUIRE_GETADDRINFO_LOCK error = getaddrinfo(hptr, pptr, &hints, &res0); Py_END_ALLOW_THREADS RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */ if (error) { set_gaierror(error); goto err; } if ((all = PyList_New(0)) == NULL) goto err; for (res = res0; res; res = res->ai_next) { PyObject *addr = makesockaddr(-1, res->ai_addr, res->ai_addrlen); if (addr == NULL) goto err; single = Py_BuildValue("iiisO", res->ai_family, res->ai_socktype, res->ai_protocol, res->ai_canonname ? res->ai_canonname : "", addr); Py_DECREF(addr); if (single == NULL) goto err; if (PyList_Append(all, single)) goto err; Py_XDECREF(single); } Py_XDECREF(idna); if (res0) freeaddrinfo(res0); return all; err: Py_XDECREF(single); Py_XDECREF(all); Py_XDECREF(idna); if (res0) freeaddrinfo(res0); return (PyObject *)NULL; } PyDoc_STRVAR(getaddrinfo_doc, "getaddrinfo(host, port [, family, socktype, proto, flags])\n\ -> list of (family, socktype, proto, canonname, sockaddr)\n\ \n\ Resolve host and port into addrinfo struct."); /* Python interface to getnameinfo(sa, flags). */ /*ARGSUSED*/ static PyObject * socket_getnameinfo(PyObject *self, PyObject *args) { PyObject *sa = (PyObject *)NULL; int flags; char *hostp; int port, flowinfo, scope_id; char hbuf[NI_MAXHOST], pbuf[NI_MAXSERV]; struct addrinfo hints, *res = NULL; int error; PyObject *ret = (PyObject *)NULL; flags = flowinfo = scope_id = 0; if (!PyArg_ParseTuple(args, "Oi:getnameinfo", &sa, &flags)) return NULL; if (!PyArg_ParseTuple(sa, "si|ii", &hostp, &port, &flowinfo, &scope_id)) return NULL; PyOS_snprintf(pbuf, sizeof(pbuf), "%d", port); memset(&hints, 0, sizeof(hints)); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_DGRAM; /* make numeric port happy */ Py_BEGIN_ALLOW_THREADS ACQUIRE_GETADDRINFO_LOCK error = getaddrinfo(hostp, pbuf, &hints, &res); Py_END_ALLOW_THREADS RELEASE_GETADDRINFO_LOCK /* see comment in setipaddr() */ if (error) { set_gaierror(error); goto fail; } if (res->ai_next) { PyErr_SetString(socket_error, "sockaddr resolved to multiple addresses"); goto fail; } switch (res->ai_family) { case AF_INET: { char *t1; int t2; if (PyArg_ParseTuple(sa, "si", &t1, &t2) == 0) { PyErr_SetString(socket_error, "IPv4 sockaddr must be 2 tuple"); goto fail; } break; } #ifdef ENABLE_IPV6 case AF_INET6: { struct sockaddr_in6 *sin6; sin6 = (struct sockaddr_in6 *)res->ai_addr; sin6->sin6_flowinfo = flowinfo; sin6->sin6_scope_id = scope_id; break; } #endif } error = getnameinfo(res->ai_addr, res->ai_addrlen, hbuf, sizeof(hbuf), pbuf, sizeof(pbuf), flags); if (error) { set_gaierror(error); goto fail; } ret = Py_BuildValue("ss", hbuf, pbuf); fail: if (res) freeaddrinfo(res); return ret; } PyDoc_STRVAR(getnameinfo_doc, "getnameinfo(sockaddr, flags) --> (host, port)\n\ \n\ Get host and port for a sockaddr."); /* Python API to getting and setting the default timeout value. */ static PyObject * socket_getdefaulttimeout(PyObject *self) { if (defaulttimeout < 0.0) { Py_INCREF(Py_None); return Py_None; } else return PyFloat_FromDouble(defaulttimeout); } PyDoc_STRVAR(getdefaulttimeout_doc, "getdefaulttimeout() -> timeout\n\ \n\ Returns the default timeout in floating seconds for new socket objects.\n\ A value of None indicates that new socket objects have no timeout.\n\ When the socket module is first imported, the default is None."); static PyObject * socket_setdefaulttimeout(PyObject *self, PyObject *arg) { double timeout; if (arg == Py_None) timeout = -1.0; else { timeout = PyFloat_AsDouble(arg); if (timeout < 0.0) { if (!PyErr_Occurred()) PyErr_SetString(PyExc_ValueError, "Timeout value out of range"); return NULL; } } defaulttimeout = timeout; Py_INCREF(Py_None); return Py_None; } PyDoc_STRVAR(setdefaulttimeout_doc, "setdefaulttimeout(timeout)\n\ \n\ Set the default timeout in floating seconds for new socket objects.\n\ A value of None indicates that new socket objects have no timeout.\n\ When the socket module is first imported, the default is None."); /* List of functions exported by this module. */ static PyMethodDef socket_methods[] = { {"gethostbyname", socket_gethostbyname, METH_VARARGS, gethostbyname_doc}, {"gethostbyname_ex", socket_gethostbyname_ex, METH_VARARGS, ghbn_ex_doc}, {"gethostbyaddr", socket_gethostbyaddr, METH_VARARGS, gethostbyaddr_doc}, {"gethostname", socket_gethostname, METH_VARARGS, gethostname_doc}, {"getservbyname", socket_getservbyname, METH_VARARGS, getservbyname_doc}, {"getprotobyname", socket_getprotobyname, METH_VARARGS,getprotobyname_doc}, #ifndef NO_DUP {"fromfd", socket_fromfd, METH_VARARGS, fromfd_doc}, #endif {"ntohs", socket_ntohs, METH_VARARGS, ntohs_doc}, {"ntohl", socket_ntohl, METH_O, ntohl_doc}, {"htons", socket_htons, METH_VARARGS, htons_doc}, {"htonl", socket_htonl, METH_O, htonl_doc}, {"inet_aton", socket_inet_aton, METH_VARARGS, inet_aton_doc}, {"inet_ntoa", socket_inet_ntoa, METH_VARARGS, inet_ntoa_doc}, #ifdef HAVE_INET_PTON {"inet_pton", socket_inet_pton, METH_VARARGS, inet_pton_doc}, {"inet_ntop", socket_inet_ntop, METH_VARARGS, inet_ntop_doc}, #endif {"getaddrinfo", socket_getaddrinfo, METH_VARARGS, getaddrinfo_doc}, {"getnameinfo", socket_getnameinfo, METH_VARARGS, getnameinfo_doc}, {"getdefaulttimeout", (PyCFunction)socket_getdefaulttimeout, METH_NOARGS, getdefaulttimeout_doc}, {"setdefaulttimeout", socket_setdefaulttimeout, METH_O, setdefaulttimeout_doc}, {NULL, NULL} /* Sentinel */ }; #ifdef RISCOS #define OS_INIT_DEFINED static int os_init(void) { _kernel_swi_regs r; r.r[0] = 0; _kernel_swi(0x43380, &r, &r); taskwindow = r.r[0]; return 1; } #endif /* RISCOS */ #ifdef MS_WINDOWS #define OS_INIT_DEFINED /* Additional initialization and cleanup for Windows */ static void os_cleanup(void) { WSACleanup(); } static int os_init(void) { WSADATA WSAData; int ret; char buf[100]; ret = WSAStartup(0x0101, &WSAData); switch (ret) { case 0: /* No error */ Py_AtExit(os_cleanup); return 1; /* Success */ case WSASYSNOTREADY: PyErr_SetString(PyExc_ImportError, "WSAStartup failed: network not ready"); break; case WSAVERNOTSUPPORTED: case WSAEINVAL: PyErr_SetString( PyExc_ImportError, "WSAStartup failed: requested version not supported"); break; default: PyOS_snprintf(buf, sizeof(buf), "WSAStartup failed: error code %d", ret); PyErr_SetString(PyExc_ImportError, buf); break; } return 0; /* Failure */ } #endif /* MS_WINDOWS */ #ifdef PYOS_OS2 #define OS_INIT_DEFINED /* Additional initialization for OS/2 */ static int os_init(void) { #ifndef PYCC_GCC char reason[64]; int rc = sock_init(); if (rc == 0) { return 1; /* Success */ } PyOS_snprintf(reason, sizeof(reason), "OS/2 TCP/IP Error# %d", sock_errno()); PyErr_SetString(PyExc_ImportError, reason); return 0; /* Failure */ #else /* No need to initialise sockets with GCC/EMX */ return 1; /* Success */ #endif } #endif /* PYOS_OS2 */ #ifndef OS_INIT_DEFINED static int os_init(void) { return 1; /* Success */ } #endif /* C API table - always add new things to the end for binary compatibility. */ static PySocketModule_APIObject PySocketModuleAPI = { &sock_type, }; /* Initialize the _socket module. This module is actually called "_socket", and there's a wrapper "socket.py" which implements some additional functionality. On some platforms (e.g. Windows and OS/2), socket.py also implements a wrapper for the socket type that provides missing functionality such as makefile(), dup() and fromfd(). The import of "_socket" may fail with an ImportError exception if os-specific initialization fails. On Windows, this does WINSOCK initialization. When WINSOCK is initialized succesfully, a call to WSACleanup() is scheduled to be made at exit time. */ PyDoc_STRVAR(socket_doc, "Implementation module for socket operations.\n\ \n\ See the socket module for documentation."); PyMODINIT_FUNC init_socket(void) { PyObject *m, *has_ipv6; if (!os_init()) return; sock_type.ob_type = &PyType_Type; m = Py_InitModule3(PySocket_MODULE_NAME, socket_methods, socket_doc); socket_error = PyErr_NewException("socket.error", NULL, NULL); if (socket_error == NULL) return; Py_INCREF(socket_error); PyModule_AddObject(m, "error", socket_error); socket_herror = PyErr_NewException("socket.herror", socket_error, NULL); if (socket_herror == NULL) return; Py_INCREF(socket_herror); PyModule_AddObject(m, "herror", socket_herror); socket_gaierror = PyErr_NewException("socket.gaierror", socket_error, NULL); if (socket_gaierror == NULL) return; Py_INCREF(socket_gaierror); PyModule_AddObject(m, "gaierror", socket_gaierror); socket_timeout = PyErr_NewException("socket.timeout", socket_error, NULL); if (socket_timeout == NULL) return; Py_INCREF(socket_timeout); PyModule_AddObject(m, "timeout", socket_timeout); Py_INCREF((PyObject *)&sock_type); if (PyModule_AddObject(m, "SocketType", (PyObject *)&sock_type) != 0) return; Py_INCREF((PyObject *)&sock_type); if (PyModule_AddObject(m, "socket", (PyObject *)&sock_type) != 0) return; #ifdef ENABLE_IPV6 has_ipv6 = Py_True; #else has_ipv6 = Py_False; #endif Py_INCREF(has_ipv6); PyModule_AddObject(m, "has_ipv6", has_ipv6); /* Export C API */ if (PyModule_AddObject(m, PySocket_CAPI_NAME, PyCObject_FromVoidPtr((void *)&PySocketModuleAPI, NULL) ) != 0) return; /* Address families (we only support AF_INET and AF_UNIX) */ #ifdef AF_UNSPEC PyModule_AddIntConstant(m, "AF_UNSPEC", AF_UNSPEC); #endif PyModule_AddIntConstant(m, "AF_INET", AF_INET); #ifdef AF_INET6 PyModule_AddIntConstant(m, "AF_INET6", AF_INET6); #endif /* AF_INET6 */ #if defined(AF_UNIX) && !defined(PYOS_OS2) PyModule_AddIntConstant(m, "AF_UNIX", AF_UNIX); #endif /* AF_UNIX */ #ifdef AF_AX25 /* Amateur Radio AX.25 */ PyModule_AddIntConstant(m, "AF_AX25", AF_AX25); #endif #ifdef AF_IPX PyModule_AddIntConstant(m, "AF_IPX", AF_IPX); /* Novell IPX */ #endif #ifdef AF_APPLETALK /* Appletalk DDP */ PyModule_AddIntConstant(m, "AF_APPLETALK", AF_APPLETALK); #endif #ifdef AF_NETROM /* Amateur radio NetROM */ PyModule_AddIntConstant(m, "AF_NETROM", AF_NETROM); #endif #ifdef AF_BRIDGE /* Multiprotocol bridge */ PyModule_AddIntConstant(m, "AF_BRIDGE", AF_BRIDGE); #endif #ifdef AF_AAL5 /* Reserved for Werner's ATM */ PyModule_AddIntConstant(m, "AF_AAL5", AF_AAL5); #endif #ifdef AF_X25 /* Reserved for X.25 project */ PyModule_AddIntConstant(m, "AF_X25", AF_X25); #endif #ifdef AF_INET6 PyModule_AddIntConstant(m, "AF_INET6", AF_INET6); /* IP version 6 */ #endif #ifdef AF_ROSE /* Amateur Radio X.25 PLP */ PyModule_AddIntConstant(m, "AF_ROSE", AF_ROSE); #endif #ifdef HAVE_NETPACKET_PACKET_H PyModule_AddIntConstant(m, "AF_PACKET", AF_PACKET); PyModule_AddIntConstant(m, "PF_PACKET", PF_PACKET); PyModule_AddIntConstant(m, "PACKET_HOST", PACKET_HOST); PyModule_AddIntConstant(m, "PACKET_BROADCAST", PACKET_BROADCAST); PyModule_AddIntConstant(m, "PACKET_MULTICAST", PACKET_MULTICAST); PyModule_AddIntConstant(m, "PACKET_OTHERHOST", PACKET_OTHERHOST); PyModule_AddIntConstant(m, "PACKET_OUTGOING", PACKET_OUTGOING); PyModule_AddIntConstant(m, "PACKET_LOOPBACK", PACKET_LOOPBACK); PyModule_AddIntConstant(m, "PACKET_FASTROUTE", PACKET_FASTROUTE); #endif /* Socket types */ PyModule_AddIntConstant(m, "SOCK_STREAM", SOCK_STREAM); PyModule_AddIntConstant(m, "SOCK_DGRAM", SOCK_DGRAM); #ifndef __BEOS__ /* We have incomplete socket support. */ PyModule_AddIntConstant(m, "SOCK_RAW", SOCK_RAW); PyModule_AddIntConstant(m, "SOCK_SEQPACKET", SOCK_SEQPACKET); #if defined(SOCK_RDM) PyModule_AddIntConstant(m, "SOCK_RDM", SOCK_RDM); #endif #endif #ifdef SO_DEBUG PyModule_AddIntConstant(m, "SO_DEBUG", SO_DEBUG); #endif #ifdef SO_ACCEPTCONN PyModule_AddIntConstant(m, "SO_ACCEPTCONN", SO_ACCEPTCONN); #endif #ifdef SO_REUSEADDR PyModule_AddIntConstant(m, "SO_REUSEADDR", SO_REUSEADDR); #endif #ifdef SO_KEEPALIVE PyModule_AddIntConstant(m, "SO_KEEPALIVE", SO_KEEPALIVE); #endif #ifdef SO_DONTROUTE PyModule_AddIntConstant(m, "SO_DONTROUTE", SO_DONTROUTE); #endif #ifdef SO_BROADCAST PyModule_AddIntConstant(m, "SO_BROADCAST", SO_BROADCAST); #endif #ifdef SO_USELOOPBACK PyModule_AddIntConstant(m, "SO_USELOOPBACK", SO_USELOOPBACK); #endif #ifdef SO_LINGER PyModule_AddIntConstant(m, "SO_LINGER", SO_LINGER); #endif #ifdef SO_OOBINLINE PyModule_AddIntConstant(m, "SO_OOBINLINE", SO_OOBINLINE); #endif #ifdef SO_REUSEPORT PyModule_AddIntConstant(m, "SO_REUSEPORT", SO_REUSEPORT); #endif #ifdef SO_SNDBUF PyModule_AddIntConstant(m, "SO_SNDBUF", SO_SNDBUF); #endif #ifdef SO_RCVBUF PyModule_AddIntConstant(m, "SO_RCVBUF", SO_RCVBUF); #endif #ifdef SO_SNDLOWAT PyModule_AddIntConstant(m, "SO_SNDLOWAT", SO_SNDLOWAT); #endif #ifdef SO_RCVLOWAT PyModule_AddIntConstant(m, "SO_RCVLOWAT", SO_RCVLOWAT); #endif #ifdef SO_SNDTIMEO PyModule_AddIntConstant(m, "SO_SNDTIMEO", SO_SNDTIMEO); #endif #ifdef SO_RCVTIMEO PyModule_AddIntConstant(m, "SO_RCVTIMEO", SO_RCVTIMEO); #endif #ifdef SO_ERROR PyModule_AddIntConstant(m, "SO_ERROR", SO_ERROR); #endif #ifdef SO_TYPE PyModule_AddIntConstant(m, "SO_TYPE", SO_TYPE); #endif /* Maximum number of connections for "listen" */ #ifdef SOMAXCONN PyModule_AddIntConstant(m, "SOMAXCONN", SOMAXCONN); #else PyModule_AddIntConstant(m, "SOMAXCONN", 5); /* Common value */ #endif /* Flags for send, recv */ #ifdef MSG_OOB PyModule_AddIntConstant(m, "MSG_OOB", MSG_OOB); #endif #ifdef MSG_PEEK PyModule_AddIntConstant(m, "MSG_PEEK", MSG_PEEK); #endif #ifdef MSG_DONTROUTE PyModule_AddIntConstant(m, "MSG_DONTROUTE", MSG_DONTROUTE); #endif #ifdef MSG_DONTWAIT PyModule_AddIntConstant(m, "MSG_DONTWAIT", MSG_DONTWAIT); #endif #ifdef MSG_EOR PyModule_AddIntConstant(m, "MSG_EOR", MSG_EOR); #endif #ifdef MSG_TRUNC PyModule_AddIntConstant(m, "MSG_TRUNC", MSG_TRUNC); #endif #ifdef MSG_CTRUNC PyModule_AddIntConstant(m, "MSG_CTRUNC", MSG_CTRUNC); #endif #ifdef MSG_WAITALL PyModule_AddIntConstant(m, "MSG_WAITALL", MSG_WAITALL); #endif #ifdef MSG_BTAG PyModule_AddIntConstant(m, "MSG_BTAG", MSG_BTAG); #endif #ifdef MSG_ETAG PyModule_AddIntConstant(m, "MSG_ETAG", MSG_ETAG); #endif /* Protocol level and numbers, usable for [gs]etsockopt */ #ifdef SOL_SOCKET PyModule_AddIntConstant(m, "SOL_SOCKET", SOL_SOCKET); #endif #ifdef SOL_IP PyModule_AddIntConstant(m, "SOL_IP", SOL_IP); #else PyModule_AddIntConstant(m, "SOL_IP", 0); #endif #ifdef SOL_IPX PyModule_AddIntConstant(m, "SOL_IPX", SOL_IPX); #endif #ifdef SOL_AX25 PyModule_AddIntConstant(m, "SOL_AX25", SOL_AX25); #endif #ifdef SOL_ATALK PyModule_AddIntConstant(m, "SOL_ATALK", SOL_ATALK); #endif #ifdef SOL_NETROM PyModule_AddIntConstant(m, "SOL_NETROM", SOL_NETROM); #endif #ifdef SOL_ROSE PyModule_AddIntConstant(m, "SOL_ROSE", SOL_ROSE); #endif #ifdef SOL_TCP PyModule_AddIntConstant(m, "SOL_TCP", SOL_TCP); #else PyModule_AddIntConstant(m, "SOL_TCP", 6); #endif #ifdef SOL_UDP PyModule_AddIntConstant(m, "SOL_UDP", SOL_UDP); #else PyModule_AddIntConstant(m, "SOL_UDP", 17); #endif #ifdef IPPROTO_IP PyModule_AddIntConstant(m, "IPPROTO_IP", IPPROTO_IP); #else PyModule_AddIntConstant(m, "IPPROTO_IP", 0); #endif #ifdef IPPROTO_HOPOPTS PyModule_AddIntConstant(m, "IPPROTO_HOPOPTS", IPPROTO_HOPOPTS); #endif #ifdef IPPROTO_ICMP PyModule_AddIntConstant(m, "IPPROTO_ICMP", IPPROTO_ICMP); #else PyModule_AddIntConstant(m, "IPPROTO_ICMP", 1); #endif #ifdef IPPROTO_IGMP PyModule_AddIntConstant(m, "IPPROTO_IGMP", IPPROTO_IGMP); #endif #ifdef IPPROTO_GGP PyModule_AddIntConstant(m, "IPPROTO_GGP", IPPROTO_GGP); #endif #ifdef IPPROTO_IPV4 PyModule_AddIntConstant(m, "IPPROTO_IPV4", IPPROTO_IPV4); #endif #ifdef IPPROTO_IPV6 PyModule_AddIntConstant(m, "IPPROTO_IPV6", IPPROTO_IPV6); #endif #ifdef IPPROTO_IPIP PyModule_AddIntConstant(m, "IPPROTO_IPIP", IPPROTO_IPIP); #endif #ifdef IPPROTO_TCP PyModule_AddIntConstant(m, "IPPROTO_TCP", IPPROTO_TCP); #else PyModule_AddIntConstant(m, "IPPROTO_TCP", 6); #endif #ifdef IPPROTO_EGP PyModule_AddIntConstant(m, "IPPROTO_EGP", IPPROTO_EGP); #endif #ifdef IPPROTO_PUP PyModule_AddIntConstant(m, "IPPROTO_PUP", IPPROTO_PUP); #endif #ifdef IPPROTO_UDP PyModule_AddIntConstant(m, "IPPROTO_UDP", IPPROTO_UDP); #else PyModule_AddIntConstant(m, "IPPROTO_UDP", 17); #endif #ifdef IPPROTO_IDP PyModule_AddIntConstant(m, "IPPROTO_IDP", IPPROTO_IDP); #endif #ifdef IPPROTO_HELLO PyModule_AddIntConstant(m, "IPPROTO_HELLO", IPPROTO_HELLO); #endif #ifdef IPPROTO_ND PyModule_AddIntConstant(m, "IPPROTO_ND", IPPROTO_ND); #endif #ifdef IPPROTO_TP PyModule_AddIntConstant(m, "IPPROTO_TP", IPPROTO_TP); #endif #ifdef IPPROTO_IPV6 PyModule_AddIntConstant(m, "IPPROTO_IPV6", IPPROTO_IPV6); #endif #ifdef IPPROTO_ROUTING PyModule_AddIntConstant(m, "IPPROTO_ROUTING", IPPROTO_ROUTING); #endif #ifdef IPPROTO_FRAGMENT PyModule_AddIntConstant(m, "IPPROTO_FRAGMENT", IPPROTO_FRAGMENT); #endif #ifdef IPPROTO_RSVP PyModule_AddIntConstant(m, "IPPROTO_RSVP", IPPROTO_RSVP); #endif #ifdef IPPROTO_GRE PyModule_AddIntConstant(m, "IPPROTO_GRE", IPPROTO_GRE); #endif #ifdef IPPROTO_ESP PyModule_AddIntConstant(m, "IPPROTO_ESP", IPPROTO_ESP); #endif #ifdef IPPROTO_AH PyModule_AddIntConstant(m, "IPPROTO_AH", IPPROTO_AH); #endif #ifdef IPPROTO_MOBILE PyModule_AddIntConstant(m, "IPPROTO_MOBILE", IPPROTO_MOBILE); #endif #ifdef IPPROTO_ICMPV6 PyModule_AddIntConstant(m, "IPPROTO_ICMPV6", IPPROTO_ICMPV6); #endif #ifdef IPPROTO_NONE PyModule_AddIntConstant(m, "IPPROTO_NONE", IPPROTO_NONE); #endif #ifdef IPPROTO_DSTOPTS PyModule_AddIntConstant(m, "IPPROTO_DSTOPTS", IPPROTO_DSTOPTS); #endif #ifdef IPPROTO_XTP PyModule_AddIntConstant(m, "IPPROTO_XTP", IPPROTO_XTP); #endif #ifdef IPPROTO_EON PyModule_AddIntConstant(m, "IPPROTO_EON", IPPROTO_EON); #endif #ifdef IPPROTO_PIM PyModule_AddIntConstant(m, "IPPROTO_PIM", IPPROTO_PIM); #endif #ifdef IPPROTO_IPCOMP PyModule_AddIntConstant(m, "IPPROTO_IPCOMP", IPPROTO_IPCOMP); #endif #ifdef IPPROTO_VRRP PyModule_AddIntConstant(m, "IPPROTO_VRRP", IPPROTO_VRRP); #endif #ifdef IPPROTO_BIP PyModule_AddIntConstant(m, "IPPROTO_BIP", IPPROTO_BIP); #endif /**/ #ifdef IPPROTO_RAW PyModule_AddIntConstant(m, "IPPROTO_RAW", IPPROTO_RAW); #else PyModule_AddIntConstant(m, "IPPROTO_RAW", 255); #endif #ifdef IPPROTO_MAX PyModule_AddIntConstant(m, "IPPROTO_MAX", IPPROTO_MAX); #endif /* Some port configuration */ #ifdef IPPORT_RESERVED PyModule_AddIntConstant(m, "IPPORT_RESERVED", IPPORT_RESERVED); #else PyModule_AddIntConstant(m, "IPPORT_RESERVED", 1024); #endif #ifdef IPPORT_USERRESERVED PyModule_AddIntConstant(m, "IPPORT_USERRESERVED", IPPORT_USERRESERVED); #else PyModule_AddIntConstant(m, "IPPORT_USERRESERVED", 5000); #endif /* Some reserved IP v.4 addresses */ #ifdef INADDR_ANY PyModule_AddIntConstant(m, "INADDR_ANY", INADDR_ANY); #else PyModule_AddIntConstant(m, "INADDR_ANY", 0x00000000); #endif #ifdef INADDR_BROADCAST PyModule_AddIntConstant(m, "INADDR_BROADCAST", INADDR_BROADCAST); #else PyModule_AddIntConstant(m, "INADDR_BROADCAST", 0xffffffff); #endif #ifdef INADDR_LOOPBACK PyModule_AddIntConstant(m, "INADDR_LOOPBACK", INADDR_LOOPBACK); #else PyModule_AddIntConstant(m, "INADDR_LOOPBACK", 0x7F000001); #endif #ifdef INADDR_UNSPEC_GROUP PyModule_AddIntConstant(m, "INADDR_UNSPEC_GROUP", INADDR_UNSPEC_GROUP); #else PyModule_AddIntConstant(m, "INADDR_UNSPEC_GROUP", 0xe0000000); #endif #ifdef INADDR_ALLHOSTS_GROUP PyModule_AddIntConstant(m, "INADDR_ALLHOSTS_GROUP", INADDR_ALLHOSTS_GROUP); #else PyModule_AddIntConstant(m, "INADDR_ALLHOSTS_GROUP", 0xe0000001); #endif #ifdef INADDR_MAX_LOCAL_GROUP PyModule_AddIntConstant(m, "INADDR_MAX_LOCAL_GROUP", INADDR_MAX_LOCAL_GROUP); #else PyModule_AddIntConstant(m, "INADDR_MAX_LOCAL_GROUP", 0xe00000ff); #endif #ifdef INADDR_NONE PyModule_AddIntConstant(m, "INADDR_NONE", INADDR_NONE); #else PyModule_AddIntConstant(m, "INADDR_NONE", 0xffffffff); #endif /* IPv4 [gs]etsockopt options */ #ifdef IP_OPTIONS PyModule_AddIntConstant(m, "IP_OPTIONS", IP_OPTIONS); #endif #ifdef IP_HDRINCL PyModule_AddIntConstant(m, "IP_HDRINCL", IP_HDRINCL); #endif #ifdef IP_TOS PyModule_AddIntConstant(m, "IP_TOS", IP_TOS); #endif #ifdef IP_TTL PyModule_AddIntConstant(m, "IP_TTL", IP_TTL); #endif #ifdef IP_RECVOPTS PyModule_AddIntConstant(m, "IP_RECVOPTS", IP_RECVOPTS); #endif #ifdef IP_RECVRETOPTS PyModule_AddIntConstant(m, "IP_RECVRETOPTS", IP_RECVRETOPTS); #endif #ifdef IP_RECVDSTADDR PyModule_AddIntConstant(m, "IP_RECVDSTADDR", IP_RECVDSTADDR); #endif #ifdef IP_RETOPTS PyModule_AddIntConstant(m, "IP_RETOPTS", IP_RETOPTS); #endif #ifdef IP_MULTICAST_IF PyModule_AddIntConstant(m, "IP_MULTICAST_IF", IP_MULTICAST_IF); #endif #ifdef IP_MULTICAST_TTL PyModule_AddIntConstant(m, "IP_MULTICAST_TTL", IP_MULTICAST_TTL); #endif #ifdef IP_MULTICAST_LOOP PyModule_AddIntConstant(m, "IP_MULTICAST_LOOP", IP_MULTICAST_LOOP); #endif #ifdef IP_ADD_MEMBERSHIP PyModule_AddIntConstant(m, "IP_ADD_MEMBERSHIP", IP_ADD_MEMBERSHIP); #endif #ifdef IP_DROP_MEMBERSHIP PyModule_AddIntConstant(m, "IP_DROP_MEMBERSHIP", IP_DROP_MEMBERSHIP); #endif #ifdef IP_DEFAULT_MULTICAST_TTL PyModule_AddIntConstant(m, "IP_DEFAULT_MULTICAST_TTL", IP_DEFAULT_MULTICAST_TTL); #endif #ifdef IP_DEFAULT_MULTICAST_LOOP PyModule_AddIntConstant(m, "IP_DEFAULT_MULTICAST_LOOP", IP_DEFAULT_MULTICAST_LOOP); #endif #ifdef IP_MAX_MEMBERSHIPS PyModule_AddIntConstant(m, "IP_MAX_MEMBERSHIPS", IP_MAX_MEMBERSHIPS); #endif /* IPv6 [gs]etsockopt options, defined in RFC2553 */ #ifdef IPV6_JOIN_GROUP PyModule_AddIntConstant(m, "IPV6_JOIN_GROUP", IPV6_JOIN_GROUP); #endif #ifdef IPV6_LEAVE_GROUP PyModule_AddIntConstant(m, "IPV6_LEAVE_GROUP", IPV6_LEAVE_GROUP); #endif #ifdef IPV6_MULTICAST_HOPS PyModule_AddIntConstant(m, "IPV6_MULTICAST_HOPS", IPV6_MULTICAST_HOPS); #endif #ifdef IPV6_MULTICAST_IF PyModule_AddIntConstant(m, "IPV6_MULTICAST_IF", IPV6_MULTICAST_IF); #endif #ifdef IPV6_MULTICAST_LOOP PyModule_AddIntConstant(m, "IPV6_MULTICAST_LOOP", IPV6_MULTICAST_LOOP); #endif #ifdef IPV6_UNICAST_HOPS PyModule_AddIntConstant(m, "IPV6_UNICAST_HOPS", IPV6_UNICAST_HOPS); #endif /* TCP options */ #ifdef TCP_NODELAY PyModule_AddIntConstant(m, "TCP_NODELAY", TCP_NODELAY); #endif #ifdef TCP_MAXSEG PyModule_AddIntConstant(m, "TCP_MAXSEG", TCP_MAXSEG); #endif #ifdef TCP_CORK PyModule_AddIntConstant(m, "TCP_CORK", TCP_CORK); #endif #ifdef TCP_KEEPIDLE PyModule_AddIntConstant(m, "TCP_KEEPIDLE", TCP_KEEPIDLE); #endif #ifdef TCP_KEEPINTVL PyModule_AddIntConstant(m, "TCP_KEEPINTVL", TCP_KEEPINTVL); #endif #ifdef TCP_KEEPCNT PyModule_AddIntConstant(m, "TCP_KEEPCNT", TCP_KEEPCNT); #endif #ifdef TCP_SYNCNT PyModule_AddIntConstant(m, "TCP_SYNCNT", TCP_SYNCNT); #endif #ifdef TCP_LINGER2 PyModule_AddIntConstant(m, "TCP_LINGER2", TCP_LINGER2); #endif #ifdef TCP_DEFER_ACCEPT PyModule_AddIntConstant(m, "TCP_DEFER_ACCEPT", TCP_DEFER_ACCEPT); #endif #ifdef TCP_WINDOW_CLAMP PyModule_AddIntConstant(m, "TCP_WINDOW_CLAMP", TCP_WINDOW_CLAMP); #endif #ifdef TCP_INFO PyModule_AddIntConstant(m, "TCP_INFO", TCP_INFO); #endif #ifdef TCP_QUICKACK PyModule_AddIntConstant(m, "TCP_QUICKACK", TCP_QUICKACK); #endif /* IPX options */ #ifdef IPX_TYPE PyModule_AddIntConstant(m, "IPX_TYPE", IPX_TYPE); #endif /* get{addr,name}info parameters */ #ifdef EAI_ADDRFAMILY PyModule_AddIntConstant(m, "EAI_ADDRFAMILY", EAI_ADDRFAMILY); #endif #ifdef EAI_AGAIN PyModule_AddIntConstant(m, "EAI_AGAIN", EAI_AGAIN); #endif #ifdef EAI_BADFLAGS PyModule_AddIntConstant(m, "EAI_BADFLAGS", EAI_BADFLAGS); #endif #ifdef EAI_FAIL PyModule_AddIntConstant(m, "EAI_FAIL", EAI_FAIL); #endif #ifdef EAI_FAMILY PyModule_AddIntConstant(m, "EAI_FAMILY", EAI_FAMILY); #endif #ifdef EAI_MEMORY PyModule_AddIntConstant(m, "EAI_MEMORY", EAI_MEMORY); #endif #ifdef EAI_NODATA PyModule_AddIntConstant(m, "EAI_NODATA", EAI_NODATA); #endif #ifdef EAI_NONAME PyModule_AddIntConstant(m, "EAI_NONAME", EAI_NONAME); #endif #ifdef EAI_SERVICE PyModule_AddIntConstant(m, "EAI_SERVICE", EAI_SERVICE); #endif #ifdef EAI_SOCKTYPE PyModule_AddIntConstant(m, "EAI_SOCKTYPE", EAI_SOCKTYPE); #endif #ifdef EAI_SYSTEM PyModule_AddIntConstant(m, "EAI_SYSTEM", EAI_SYSTEM); #endif #ifdef EAI_BADHINTS PyModule_AddIntConstant(m, "EAI_BADHINTS", EAI_BADHINTS); #endif #ifdef EAI_PROTOCOL PyModule_AddIntConstant(m, "EAI_PROTOCOL", EAI_PROTOCOL); #endif #ifdef EAI_MAX PyModule_AddIntConstant(m, "EAI_MAX", EAI_MAX); #endif #ifdef AI_PASSIVE PyModule_AddIntConstant(m, "AI_PASSIVE", AI_PASSIVE); #endif #ifdef AI_CANONNAME PyModule_AddIntConstant(m, "AI_CANONNAME", AI_CANONNAME); #endif #ifdef AI_NUMERICHOST PyModule_AddIntConstant(m, "AI_NUMERICHOST", AI_NUMERICHOST); #endif #ifdef AI_MASK PyModule_AddIntConstant(m, "AI_MASK", AI_MASK); #endif #ifdef AI_ALL PyModule_AddIntConstant(m, "AI_ALL", AI_ALL); #endif #ifdef AI_V4MAPPED_CFG PyModule_AddIntConstant(m, "AI_V4MAPPED_CFG", AI_V4MAPPED_CFG); #endif #ifdef AI_ADDRCONFIG PyModule_AddIntConstant(m, "AI_ADDRCONFIG", AI_ADDRCONFIG); #endif #ifdef AI_V4MAPPED PyModule_AddIntConstant(m, "AI_V4MAPPED", AI_V4MAPPED); #endif #ifdef AI_DEFAULT PyModule_AddIntConstant(m, "AI_DEFAULT", AI_DEFAULT); #endif #ifdef NI_MAXHOST PyModule_AddIntConstant(m, "NI_MAXHOST", NI_MAXHOST); #endif #ifdef NI_MAXSERV PyModule_AddIntConstant(m, "NI_MAXSERV", NI_MAXSERV); #endif #ifdef NI_NOFQDN PyModule_AddIntConstant(m, "NI_NOFQDN", NI_NOFQDN); #endif #ifdef NI_NUMERICHOST PyModule_AddIntConstant(m, "NI_NUMERICHOST", NI_NUMERICHOST); #endif #ifdef NI_NAMEREQD PyModule_AddIntConstant(m, "NI_NAMEREQD", NI_NAMEREQD); #endif #ifdef NI_NUMERICSERV PyModule_AddIntConstant(m, "NI_NUMERICSERV", NI_NUMERICSERV); #endif #ifdef NI_DGRAM PyModule_AddIntConstant(m, "NI_DGRAM", NI_DGRAM); #endif /* shutdown() parameters */ #ifdef SHUT_RD PyModule_AddIntConstant(m, "SHUT_RD", SHUT_RD); #elif defined(SD_RECEIVE) PyModule_AddIntConstant(m, "SHUT_RD", SD_RECEIVE); #else PyModule_AddIntConstant(m, "SHUT_RD", 0); #endif #ifdef SHUT_WR PyModule_AddIntConstant(m, "SHUT_WR", SHUT_WR); #elif defined(SD_SEND) PyModule_AddIntConstant(m, "SHUT_WR", SD_SEND); #else PyModule_AddIntConstant(m, "SHUT_WR", 1); #endif #ifdef SHUT_RDWR PyModule_AddIntConstant(m, "SHUT_RDWR", SHUT_RDWR); #elif defined(SD_BOTH) PyModule_AddIntConstant(m, "SHUT_RDWR", SD_BOTH); #else PyModule_AddIntConstant(m, "SHUT_RDWR", 2); #endif /* Initialize gethostbyname lock */ #if defined(USE_GETHOSTBYNAME_LOCK) || defined(USE_GETADDRINFO_LOCK) netdb_lock = PyThread_allocate_lock(); #endif } #ifndef HAVE_INET_PTON /* Simplistic emulation code for inet_pton that only works for IPv4 */ /* These are not exposed because they do not set errno properly */ int inet_pton(int af, const char *src, void *dst) { if (af == AF_INET) { long packed_addr; packed_addr = inet_addr(src); if (packed_addr == INADDR_NONE) return 0; memcpy(dst, &packed_addr, 4); return 1; } /* Should set errno to EAFNOSUPPORT */ return -1; } const char * inet_ntop(int af, const void *src, char *dst, socklen_t size) { if (af == AF_INET) { struct in_addr packed_addr; if (size < 16) /* Should set errno to ENOSPC. */ return NULL; memcpy(&packed_addr, src, sizeof(packed_addr)); return strncpy(dst, inet_ntoa(packed_addr), size); } /* Should set errno to EAFNOSUPPORT */ return NULL; } #endif