\documentstyle[twoside,11pt,myformat]{report} \title{Python-C API Reference} \input{boilerplate} \makeindex % tell \index to actually write the .idx file \begin{document} \pagenumbering{roman} \maketitle \input{copyright} \begin{abstract} \noindent This manual documents the API used by C (or C++) programmers who want to write extension modules or embed Python. It is a companion to ``Extending and Embedding the Python Interpreter'', which describes the general principles of extension writing but does not document the API functions in detail. \end{abstract} \pagebreak { \parskip = 0mm \tableofcontents } \pagebreak \pagenumbering{arabic} \chapter{Introduction} The Application Programmer's Interface to Python gives C and C++ programmers access to the Python interpreter at a variety of levels. There are two fundamentally different reasons for using the Python/C API. (The API is equally usable from C++, but for brevity it is generally referred to as the Python/C API.) The first reason is to write ``extension modules'' for specific purposes; these are C modules that extend the Python interpreter. This is probably the most common use. The second reason is to use Python as a component in a larger application; this technique is generally referred to as ``embedding'' Python in an application. Writing an extension module is a relatively well-understood process, where a ``cookbook'' approach works well. There are several tools that automate the process to some extent. While people have embedded Python in other applications since its early existence, the process of embedding Python is less straightforward that writing an extension. Python 1.5 introduces a number of new API functions as well as some changes to the build process that make embedding much simpler. This manual describes the 1.5 state of affair (as of Python 1.5a3). % XXX Eventually, take the historical notes out Many API functions are useful independent of whether you're embedding or extending Python; moreover, most applications that embed Python will need to provide a custom extension as well, so it's probably a good idea to become familiar with writing an extension before attempting to embed Python in a real application. \section{Objects, Types and Reference Counts} Most Python/C API functions have one or more arguments as well as a return value of type \code{PyObject *}. This type is a pointer (obviously!) to an opaque data type representing an arbitrary Python object. Since all Python object types are treated the same way by the Python language in most situations (e.g., assignments, scope rules, and argument passing), it is only fitting that they should be represented by a single C type. All Python objects live on the heap: you never declare an automatic or static variable of type \code{PyObject}, only pointer variables of type \code{PyObject *} can be declared. All Python objects (even Python integers) have a ``type'' and a ``reference count''. An object's type determines what kind of object it is (e.g., an integer, a list, or a user-defined function; there are many more as explained in the Python Language Reference Manual). For each of the well-known types there is a macro to check whether an object is of that type; for instance, \code{PyList_Check(a)} is true iff the object pointed to by \code{a} is a Python list. The reference count is important only because today's computers have a finite (and often severly limited) memory size; it counts how many different places there are that have a reference to an object. Such a place could be another object, or a global (or static) C variable, or a local variable in some C function. When an object's reference count becomes zero, the object is deallocated. If it contains references to other objects, their reference count is decremented. Those other objects may be deallocated in turn, if this decrement makes their reference count become zero, and so on. (There's an obvious problem with objects that reference each other here; for now, the solution is ``don't do that''.) Reference counts are always manipulated explicitly. The normal way is to use the macro \code{Py_INCREF(a)} to increment an object's reference count by one, and \code{Py_DECREF(a)} to decrement it by one. The latter macro is considerably more complex than the former, since it must check whether the reference count becomes zero and then cause the object's deallocator, which is a function pointer contained in the object's type structure. The type-specific deallocator takes care of decrementing the reference counts for other objects contained in the object, and so on, if this is a compound object type such as a list. There's no chance that the reference count can overflow; at least as many bits are used to hold the reference count as there are distinct memory locations in virtual memory (assuming \code{sizeof(long) >= sizeof(char *)}). Thus, the reference count increment is a simple operation. It is not necessary to increment an object's reference count for every local variable that contains a pointer to an object. In theory, the oject's reference count goes up by one when the variable is made to point to it and it goes down by one when the variable goes out of scope. However, these two cancel each other out, so at the end the reference count hasn't changed. The only real reason to use the reference count is to prevent the object from being deallocated as long as our variable is pointing to it. If we know that there is at least one other reference to the object that lives at least as long as our variable, there is no need to increment the reference count temporarily. An important situation where this arises is in objects that are passed as arguments to C functions in an extension module that are called from Python; the call mechanism guarantees to hold a reference to every argument for the duration of the call. However, a common pitfall is to extract an object from a list and holding on to it for a while without incrementing its reference count. Some other operation might conceivably remove the object from the list, decrementing its reference count and possible deallocating it. The real danger is that innocent-looking operations may invoke arbitrary Python code which could do this; there is a code path which allows control to flow back to the user from a \code{Py_DECREF()}, so almost any operation is potentially dangerous. A safe approach is to always use the generic operations (functions whose name begins with \code{PyObject_}, \code{PyNumber_}, \code{PySequence_} or \code{PyMapping_}). These operations always increment the reference count of the object they return. This leaves the caller with the responsibility to call \code{Py_DECREF()} when they are done with the result; this soon becomes second nature. There are very few other data types that play a significant role in the Python/C API; most are all simple C types such as \code{int}, \code{long}, \code{double} and \code{char *}. A few structure types are used to describe static tables used to list the functions exported by a module or the data attributes of a new object type. These will be discussed together with the functions that use them. \section{Exceptions} The Python programmer only needs to deal with exceptions if specific error handling is required; unhandled exceptions are automatically propagated to the caller, then to the caller's caller, and so on, till they reach the top-level interpreter, where they are reported to the user accompanied by a stack trace. For C programmers, however, error checking always has to be explicit. % XXX add more stuff here \section{Embedding Python} The one important task that only embedders of the Python interpreter have to worry about is the initialization (and possibly the finalization) of the Python interpreter. Most functionality of the interpreter can only be used after the interpreter has been initialized. The basic initialization function is \code{Py_Initialize()}. This initializes the table of loaded modules, and creates the fundamental modules \code{__builtin__}, \code{__main__} and \code{sys}. It also initializes the module search path (\code{sys.path}). \code{Py_Initialize()} does not set the ``script argument list'' (\code{sys.argv}). If this variable is needed by Python code that will be executed later, it must be set explicitly with a call to \code{PySys_SetArgv(\var{argc}, \var{argv})} subsequent to the call to \code{Py_Initialize()}. On Unix, \code{Py_Initialize()} calculates the module search path based upon its best guess for the location of the standard Python interpreter executable, assuming that the Python library is found in a fixed location relative to the Python interpreter executable. In particular, it looks for a directory named \code{lib/python1.5} (replacing \code{1.5} with the current interpreter version) relative to the parent directory where the executable named \code{python} is found on the shell command search path (the environment variable \code{\$PATH}). For instance, if the Python executable is found in \code{/usr/local/bin/python}, it will assume that the libraries are in \code{/usr/local/lib/python1.5}. In fact, this also the ``fallback'' location, used when no executable file named \code{python} is found along \code{\$PATH}. The user can change this behavior by setting the environment variable \code{\$PYTHONHOME}, and can insert additional directories in front of the standard path by setting \code{\$PYTHONPATH}. The embedding application can steer the search by calling \code{Py_SetProgramName(\var{file})} \emph{before} calling \code{Py_Initialize()}. Note that \code{\$PYTHONHOME} still overrides this and \code{\$PYTHONPATH} is still inserted in front of the standard path. Sometimes, it is desirable to ``uninitialize'' Python. For instance, the application may want to start over (make another call to \code{Py_Initialize()}) or the application is simply done with its use of Python and wants to free all memory allocated by Python. This can be accomplished by calling \code{Py_Finalize()}. % XXX More... \section{Embedding Python in Threaded Applications} \chapter{Old Introduction} (XXX This is the old introduction, mostly by Jim Fulton -- should be rewritten.) From the viewpoint of of C access to Python services, we have: \begin{enumerate} \item "Very high level layer": two or three functions that let you exec or eval arbitrary Python code given as a string in a module whose name is given, passing C values in and getting C values out using mkvalue/getargs style format strings. This does not require the user to declare any variables of type \code{PyObject *}. This should be enough to write a simple application that gets Python code from the user, execs it, and returns the output or errors. \item "Abstract objects layer": which is the subject of this chapter. It has many functions operating on objects, and lets you do many things from C that you can also write in Python, without going through the Python parser. \item "Concrete objects layer": This is the public type-dependent interface provided by the standard built-in types, such as floats, strings, and lists. This interface exists and is currently documented by the collection of include files provides with the Python distributions. \end{enumerate} From the point of view of Python accessing services provided by C modules: \begin{enumerate} \item[4.] "Python module interface": this interface consist of the basic routines used to define modules and their members. Most of the current extensions-writing guide deals with this interface. \item[5.] "Built-in object interface": this is the interface that a new built-in type must provide and the mechanisms and rules that a developer of a new built-in type must use and follow. \end{enumerate} The Python C API provides four groups of operations on objects, corresponding to the same operations in the Python language: object, numeric, sequence, and mapping. Each protocol consists of a collection of related operations. If an operation that is not provided by a particular type is invoked, then the standard exception \code{TypeError} is raised with a operation name as an argument. In addition, for convenience this interface defines a set of constructors for building objects of built-in types. This is needed so new objects can be returned from C functions that otherwise treat objects generically. \section{Reference Counting} For most of the functions in the Python-C API, if a function retains a reference to a Python object passed as an argument, then the function will increase the reference count of the object. It is unnecessary for the caller to increase the reference count of an argument in anticipation of the object's retention. Usually, Python objects returned from functions should be treated as new objects. Functions that return objects assume that the caller will retain a reference and the reference count of the object has already been incremented to account for this fact. A caller that does not retain a reference to an object that is returned from a function must decrement the reference count of the object (using \code{Py_DECREF()}) to prevent memory leaks. Exceptions to these rules will be noted with the individual functions. \section{Include Files} All function, type and macro definitions needed to use the Python-C API are included in your code by the following line: \code{\#include "Python.h"} This implies inclusion of the following standard header files: stdio.h, string.h, errno.h, and stdlib.h (if available). All user visible names defined by Python.h (except those defined by the included standard headers) have one of the prefixes \code{Py} or \code{_Py}. Names beginning with \code{_Py} are for internal use only. \chapter{Initialization and Shutdown of an Embedded Python Interpreter} When embedding the Python interpreter in a C or C++ program, the interpreter must be initialized. \begin{cfuncdesc}{void}{PyInitialize}{} This function initializes the interpreter. It must be called before any interaction with the interpreter takes place. If it is called more than once, the second and further calls have no effect. The function performs the following tasks: create an environment in which modules can be imported and Python code can be executed; initialize the \code{__builtin__} module; initialize the \code{sys} module; initialize \code{sys.path}; initialize signal handling; and create the empty \code{__main__} module. In the current system, there is no way to undo all these initializations or to create additional interpreter environments. \end{cfuncdesc} \begin{cfuncdesc}{int}{Py_AtExit}{void (*func) ()} Register a cleanup function to be called when Python exits. The cleanup function will be called with no arguments and should return no value. At most 32 cleanup functions can be registered. When the registration is successful, \code{Py_AtExit} returns 0; on failure, it returns -1. Each cleanup function will be called t most once. The cleanup function registered last is called first. \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_Exit}{int status} Exit the current process. This calls \code{Py_Cleanup()} (see next item) and performs additional cleanup (under some circumstances it will attempt to delete all modules), and then calls the standard C library function \code{exit(status)}. \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_Cleanup}{} Perform some of the cleanup that \code{Py_Exit} performs, but don't exit the process. In particular, this invokes the user's \code{sys.exitfunc} function (if defined at all), and it invokes the cleanup functions registered with \code{Py_AtExit()}, in reverse order of their registration. \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_FatalError}{char *message} Print a fatal error message and die. No cleanup is performed. This function should only be invoked when a condition is detected that would make it dangerous to continue using the Python interpreter; e.g., when the object administration appears to be corrupted. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyImport_Init}{} Initialize the module table. For internal use only. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyImport_Cleanup}{} Empty the module table. For internal use only. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyBuiltin_Init}{} Initialize the \code{__builtin__} module. For internal use only. \end{cfuncdesc} XXX Other init functions: PyEval_InitThreads, PyOS_InitInterrupts, PyMarshal_Init, PySys_Init. \chapter{Reference Counting} The functions in this chapter are used for managing reference counts of Python objects. \begin{cfuncdesc}{void}{Py_INCREF}{PyObject *o} Increment the reference count for object \code{o}. The object must not be \NULL{}; if you aren't sure that it isn't \NULL{}, use \code{Py_XINCREF()}. \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_XINCREF}{PyObject *o} Increment the reference count for object \code{o}. The object may be \NULL{}, in which case the function has no effect. \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_DECREF}{PyObject *o} Decrement the reference count for object \code{o}. The object must not be \NULL{}; if you aren't sure that it isn't \NULL{}, use \code{Py_XDECREF()}. If the reference count reaches zero, the object's type's deallocation function (which must not be \NULL{}) is invoked. \strong{Warning:} The deallocation function can cause arbitrary Python code to be invoked (e.g. when a class instance with a \code{__del__()} method is deallocated). While exceptions in such code are not propagated, the executed code has free access to all Python global variables. This means that any object that is reachable from a global variable should be in a consistent state before \code{Py_DECREF()} is invoked. For example, code to delete an object from a list should copy a reference to the deleted object in a temporary variable, update the list data structure, and then call \code{Py_DECREF()} for the temporary variable. \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_XDECREF}{PyObject *o} Decrement the reference count for object \code{o}.The object may be \NULL{}, in which case the function has no effect; otherwise the effect is the same as for \code{Py_DECREF()}, and the same warning applies. \end{cfuncdesc} The following functions are only for internal use: \code{_Py_Dealloc}, \code{_Py_ForgetReference}, \code{_Py_NewReference}, as well as the global variable \code{_Py_RefTotal}. \chapter{Exception Handling} The functions in this chapter will let you handle and raise Python exceptions. It is important to understand some of the basics of Python exception handling. It works somewhat like the Unix \code{errno} variable: there is a global indicator (per thread) of the last error that occurred. Most functions don't clear this on success, but will set it to indicate the cause of the error on failure. Most functions also return an error indicator, usually \NULL{} if they are supposed to return a pointer, or -1 if they return an integer (exception: the \code{PyArg_Parse*()} functions return 1 for success and 0 for failure). When a function must fail because of some function it called failed, it generally doesn't set the error indicator; the function it called already set it. The error indicator consists of three Python objects corresponding to the Python variables \code{sys.exc_type}, \code{sys.exc_value} and \code{sys.exc_traceback}. API functions exist to interact with the error indicator in various ways. There is a separate error indicator for each thread. % XXX Order of these should be more thoughtful. % Either alphabetical or some kind of structure. \begin{cfuncdesc}{void}{PyErr_Print}{} Print a standard traceback to \code{sys.stderr} and clear the error indicator. Call this function only when the error indicator is set. (Otherwise it will cause a fatal error!) \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyErr_Occurred}{} Test whether the error indicator is set. If set, return the exception \code{type} (the first argument to the last call to one of the \code{PyErr_Set*()} functions or to \code{PyErr_Restore()}). If not set, return \NULL{}. You do not own a reference to the return value, so you do not need to \code{Py_DECREF()} it. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyErr_Clear}{} Clear the error indicator. If the error indicator is not set, there is no effect. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyErr_Fetch}{PyObject **ptype, PyObject **pvalue, PyObject **ptraceback} Retrieve the error indicator into three variables whose addresses are passed. If the error indicator is not set, set all three variables to \NULL{}. If it is set, it will be cleared and you own a reference to each object retrieved. The value and traceback object may be \NULL{} even when the type object is not. \strong{Note:} this function is normally only used by code that needs to handle exceptions or by code that needs to save and restore the error indicator temporarily. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyErr_Restore}{PyObject *type, PyObject *value, PyObject *traceback} Set the error indicator from the three objects. If the error indicator is already set, it is cleared first. If the objects are \NULL{}, the error indicator is cleared. Do not pass a \NULL{} type and non-\NULL{} value or traceback. The exception type should be a string or class; if it is a class, the value should be an instance of that class. Do not pass an invalid exception type or value. (Violating these rules will cause subtle problems later.) This call takes away a reference to each object, i.e. you must own a reference to each object before the call and after the call you no longer own these references. (If you don't understand this, don't use this function. I warned you.) \strong{Note:} this function is normally only used by code that needs to save and restore the error indicator temporarily. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyErr_SetString}{PyObject *type, char *message} This is the most common way to set the error indicator. The first argument specifies the exception type; it is normally one of the standard exceptions, e.g. \code{PyExc_RuntimeError}. You need not increment its reference count. The second argument is an error message; it is converted to a string object. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyErr_SetObject}{PyObject *type, PyObject *value} This function is similar to \code{PyErr_SetString()} but lets you specify an arbitrary Python object for the ``value'' of the exception. You need not increment its reference count. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyErr_SetNone}{PyObject *type} This is a shorthand for \code{PyErr_SetString(\var{type}, Py_None}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyErr_BadArgument}{} This is a shorthand for \code{PyErr_SetString(PyExc_TypeError, \var{message})}, where \var{message} indicates that a built-in operation was invoked with an illegal argument. It is mostly for internal use. \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyErr_NoMemory}{} This is a shorthand for \code{PyErr_SetNone(PyExc_MemoryError)}; it returns \NULL{} so an object allocation function can write \code{return PyErr_NoMemory();} when it runs out of memory. \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyErr_SetFromErrno}{PyObject *type} This is a convenience function to raise an exception when a C library function has returned an error and set the C variable \code{errno}. It constructs a tuple object whose first item is the integer \code{errno} value and whose second item is the corresponding error message (gotten from \code{strerror()}), and then calls \code{PyErr_SetObject(\var{type}, \var{object})}. On \UNIX{}, when the \code{errno} value is \code{EINTR}, indicating an interrupted system call, this calls \code{PyErr_CheckSignals()}, and if that set the error indicator, leaves it set to that. The function always returns \NULL{}, so a wrapper function around a system call can write \code{return PyErr_NoMemory();} when the system call returns an error. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyErr_BadInternalCall}{} This is a shorthand for \code{PyErr_SetString(PyExc_TypeError, \var{message})}, where \var{message} indicates that an internal operation (e.g. a Python-C API function) was invoked with an illegal argument. It is mostly for internal use. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyErr_CheckSignals}{} This function interacts with Python's signal handling. It checks whether a signal has been sent to the processes and if so, invokes the corresponding signal handler. If the \code{signal} module is supported, this can invoke a signal handler written in Python. In all cases, the default effect for \code{SIGINT} is to raise the \code{KeyboadInterrupt} exception. If an exception is raised the error indicator is set and the function returns 1; otherwise the function returns 0. The error indicator may or may not be cleared if it was previously set. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyErr_SetInterrupt}{} This function is obsolete (XXX or platform dependent?). It simulates the effect of a \code{SIGINT} signal arriving -- the next time \code{PyErr_CheckSignals()} is called, \code{KeyboadInterrupt} will be raised. \end{cfuncdesc} \section{Standard Exceptions} All standard Python exceptions are available as global variables whose names are \code{PyExc_} followed by the Python exception name. These have the type \code{PyObject *}; they are all string objects. For completion, here are all the variables: \code{PyExc_AccessError}, \code{PyExc_AssertionError}, \code{PyExc_AttributeError}, \code{PyExc_EOFError}, \code{PyExc_FloatingPointError}, \code{PyExc_IOError}, \code{PyExc_ImportError}, \code{PyExc_IndexError}, \code{PyExc_KeyError}, \code{PyExc_KeyboardInterrupt}, \code{PyExc_MemoryError}, \code{PyExc_NameError}, \code{PyExc_OverflowError}, \code{PyExc_RuntimeError}, \code{PyExc_SyntaxError}, \code{PyExc_SystemError}, \code{PyExc_SystemExit}, \code{PyExc_TypeError}, \code{PyExc_ValueError}, \code{PyExc_ZeroDivisionError}. \chapter{Utilities} The functions in this chapter perform various utility tasks, such as parsing function arguments and constructing Python values from C values. \begin{cfuncdesc}{int}{Py_FdIsInteractive}{FILE *fp, char *filename} Return true (nonzero) if the standard I/O file \code{fp} with name \code{filename} is deemed interactive. This is the case for files for which \code{isatty(fileno(fp))} is true. If the global flag \code{Py_InteractiveFlag} is true, this function also returns true if the \code{name} pointer is \NULL{} or if the name is equal to one of the strings \code{""} or \code{"???"}. \end{cfuncdesc} \begin{cfuncdesc}{long}{PyOS_GetLastModificationTime}{char *filename} Return the time of last modification of the file \code{filename}. The result is encoded in the same way as the timestamp returned by the standard C library function \code{time()}. \end{cfuncdesc} \chapter{Debugging} XXX Explain Py_DEBUG, Py_TRACE_REFS, Py_REF_DEBUG. \chapter{The Very High Level Layer} The functions in this chapter will let you execute Python source code given in a file or a buffer, but they will not let you interact in a more detailed way with the interpreter. \begin{cfuncdesc}{int}{PyRun_AnyFile}{FILE *, char *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyRun_SimpleString}{char *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyRun_SimpleFile}{FILE *, char *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyRun_InteractiveOne}{FILE *, char *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyRun_InteractiveLoop}{FILE *, char *} \end{cfuncdesc} \begin{cfuncdesc}{struct _node *}{PyParser_SimpleParseString}{char *, int} \end{cfuncdesc} \begin{cfuncdesc}{struct _node *}{PyParser_SimpleParseFile}{FILE *, char *, int} \end{cfuncdesc} \begin{cfuncdesc}{}{PyObject *PyRun}{ROTO((char *, int, PyObject *, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{}{PyObject *PyRun}{ROTO((FILE *, char *, int, PyObject *, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{}{PyObject *Py}{ROTO((char *, char *, int} \end{cfuncdesc} \chapter{Abstract Objects Layer} The functions in this chapter interact with Python objects regardless of their type, or with wide classes of object types (e.g. all numerical types, or all sequence types). When used on object types for which they do not apply, they will flag a Python exception. \section{Object Protocol} \begin{cfuncdesc}{int}{PyObject_Print}{PyObject *o, FILE *fp, int flags} Print an object \code{o}, on file \code{fp}. Returns -1 on error The flags argument is used to enable certain printing options. The only option currently supported is \code{Py_Print_RAW}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_HasAttrString}{PyObject *o, char *attr_name} Returns 1 if o has the attribute attr_name, and 0 otherwise. This is equivalent to the Python expression: \code{hasattr(o,attr_name)}. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_GetAttrString}{PyObject *o, char *attr_name} Retrieve an attributed named attr_name from object o. Returns the attribute value on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{o.attr_name}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_HasAttr}{PyObject *o, PyObject *attr_name} Returns 1 if o has the attribute attr_name, and 0 otherwise. This is equivalent to the Python expression: \code{hasattr(o,attr_name)}. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_GetAttr}{PyObject *o, PyObject *attr_name} Retrieve an attributed named attr_name form object o. Returns the attribute value on success, or \NULL{} on failure. This is the equivalent of the Python expression: o.attr_name. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_SetAttrString}{PyObject *o, char *attr_name, PyObject *v} Set the value of the attribute named \code{attr_name}, for object \code{o}, to the value \code{v}. Returns -1 on failure. This is the equivalent of the Python statement: \code{o.attr_name=v}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_SetAttr}{PyObject *o, PyObject *attr_name, PyObject *v} Set the value of the attribute named \code{attr_name}, for object \code{o}, to the value \code{v}. Returns -1 on failure. This is the equivalent of the Python statement: \code{o.attr_name=v}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_DelAttrString}{PyObject *o, char *attr_name} Delete attribute named \code{attr_name}, for object \code{o}. Returns -1 on failure. This is the equivalent of the Python statement: \code{del o.attr_name}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_DelAttr}{PyObject *o, PyObject *attr_name} Delete attribute named \code{attr_name}, for object \code{o}. Returns -1 on failure. This is the equivalent of the Python statement: \code{del o.attr_name}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_Cmp}{PyObject *o1, PyObject *o2, int *result} Compare the values of \code{o1} and \code{o2} using a routine provided by \code{o1}, if one exists, otherwise with a routine provided by \code{o2}. The result of the comparison is returned in \code{result}. Returns -1 on failure. This is the equivalent of the Python statement: \code{result=cmp(o1,o2)}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_Compare}{PyObject *o1, PyObject *o2} Compare the values of \code{o1} and \code{o2} using a routine provided by \code{o1}, if one exists, otherwise with a routine provided by \code{o2}. Returns the result of the comparison on success. On error, the value returned is undefined. This is equivalent to the Python expression: \code{cmp(o1,o2)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_Repr}{PyObject *o} Compute the string representation of object, \code{o}. Returns the string representation on success, \NULL{} on failure. This is the equivalent of the Python expression: \code{repr(o)}. Called by the \code{repr()} built-in function and by reverse quotes. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_Str}{PyObject *o} Compute the string representation of object, \code{o}. Returns the string representation on success, \NULL{} on failure. This is the equivalent of the Python expression: \code{str(o)}. Called by the \code{str()} built-in function and by the \code{print} statement. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyCallable_Check}{PyObject *o} Determine if the object \code{o}, is callable. Return 1 if the object is callable and 0 otherwise. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_CallObject}{PyObject *callable_object, PyObject *args} Call a callable Python object \code{callable_object}, with arguments given by the tuple \code{args}. If no arguments are needed, then args may be \NULL{}. Returns the result of the call on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{apply(o, args)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_CallFunction}{PyObject *callable_object, char *format, ...} Call a callable Python object \code{callable_object}, with a variable number of C arguments. The C arguments are described using a mkvalue-style format string. The format may be \NULL{}, indicating that no arguments are provided. Returns the result of the call on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{apply(o,args)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_CallMethod}{PyObject *o, char *m, char *format, ...} Call the method named \code{m} of object \code{o} with a variable number of C arguments. The C arguments are described by a mkvalue format string. The format may be \NULL{}, indicating that no arguments are provided. Returns the result of the call on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{o.method(args)}. Note that Special method names, such as "\code{__add__}", "\code{__getitem__}", and so on are not supported. The specific abstract-object routines for these must be used. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_Hash}{PyObject *o} Compute and return the hash value of an object \code{o}. On failure, return -1. This is the equivalent of the Python expression: \code{hash(o)}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_IsTrue}{PyObject *o} Returns 1 if the object \code{o} is considered to be true, and 0 otherwise. This is equivalent to the Python expression: \code{not not o}. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_Type}{PyObject *o} On success, returns a type object corresponding to the object type of object \code{o}. On failure, returns \NULL{}. This is equivalent to the Python expression: \code{type(o)}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_Length}{PyObject *o} Return the length of object \code{o}. If the object \code{o} provides both sequence and mapping protocols, the sequence length is returned. On error, -1 is returned. This is the equivalent to the Python expression: \code{len(o)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyObject_GetItem}{PyObject *o, PyObject *key} Return element of \code{o} corresponding to the object \code{key} or \NULL{} on failure. This is the equivalent of the Python expression: \code{o[key]}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_SetItem}{PyObject *o, PyObject *key, PyObject *v} Map the object \code{key} to the value \code{v}. Returns -1 on failure. This is the equivalent of the Python statement: \code{o[key]=v}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyObject_DelItem}{PyObject *o, PyObject *key, PyObject *v} Delete the mapping for \code{key} from \code{*o}. Returns -1 on failure. This is the equivalent of the Python statement: \code{del o[key]}. \end{cfuncdesc} \section{Number Protocol} \begin{cfuncdesc}{int}{PyNumber_Check}{PyObject *o} Returns 1 if the object \code{o} provides numeric protocols, and false otherwise. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Add}{PyObject *o1, PyObject *o2} Returns the result of adding \code{o1} and \code{o2}, or null on failure. This is the equivalent of the Python expression: \code{o1+o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Subtract}{PyObject *o1, PyObject *o2} Returns the result of subtracting \code{o2} from \code{o1}, or null on failure. This is the equivalent of the Python expression: \code{o1-o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Multiply}{PyObject *o1, PyObject *o2} Returns the result of multiplying \code{o1} and \code{o2}, or null on failure. This is the equivalent of the Python expression: \code{o1*o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Divide}{PyObject *o1, PyObject *o2} Returns the result of dividing \code{o1} by \code{o2}, or null on failure. This is the equivalent of the Python expression: \code{o1/o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Remainder}{PyObject *o1, PyObject *o2} Returns the remainder of dividing \code{o1} by \code{o2}, or null on failure. This is the equivalent of the Python expression: \code{o1\%o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Divmod}{PyObject *o1, PyObject *o2} See the built-in function divmod. Returns \NULL{} on failure. This is the equivalent of the Python expression: \code{divmod(o1,o2)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Power}{PyObject *o1, PyObject *o2, PyObject *o3} See the built-in function pow. Returns \NULL{} on failure. This is the equivalent of the Python expression: \code{pow(o1,o2,o3)}, where \code{o3} is optional. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Negative}{PyObject *o} Returns the negation of \code{o} on success, or null on failure. This is the equivalent of the Python expression: \code{-o}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Positive}{PyObject *o} Returns \code{o} on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{+o}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Absolute}{PyObject *o} Returns the absolute value of \code{o}, or null on failure. This is the equivalent of the Python expression: \code{abs(o)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Invert}{PyObject *o} Returns the bitwise negation of \code{o} on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{\~o}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Lshift}{PyObject *o1, PyObject *o2} Returns the result of left shifting \code{o1} by \code{o2} on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{o1 << o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Rshift}{PyObject *o1, PyObject *o2} Returns the result of right shifting \code{o1} by \code{o2} on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{o1 >> o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_And}{PyObject *o1, PyObject *o2} Returns the result of "anding" \code{o2} and \code{o2} on success and \NULL{} on failure. This is the equivalent of the Python expression: \code{o1 and o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Xor}{PyObject *o1, PyObject *o2} Returns the bitwise exclusive or of \code{o1} by \code{o2} on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{o1\^{ }o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Or}{PyObject *o1, PyObject *o2} Returns the result of \code{o1} and \code{o2} on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{o1 or o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Coerce}{PyObject *o1, PyObject *o2} This function takes the addresses of two variables of type \code{PyObject*}. If the objects pointed to by \code{*p1} and \code{*p2} have the same type, increment their reference count and return 0 (success). If the objects can be converted to a common numeric type, replace \code{*p1} and \code{*p2} by their converted value (with 'new' reference counts), and return 0. If no conversion is possible, or if some other error occurs, return -1 (failure) and don't increment the reference counts. The call \code{PyNumber_Coerce(\&o1, \&o2)} is equivalent to the Python statement \code{o1, o2 = coerce(o1, o2)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Int}{PyObject *o} Returns the \code{o} converted to an integer object on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{int(o)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Long}{PyObject *o} Returns the \code{o} converted to a long integer object on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{long(o)}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyNumber_Float}{PyObject *o} Returns the \code{o} converted to a float object on success, or \NULL{} on failure. This is the equivalent of the Python expression: \code{float(o)}. \end{cfuncdesc} \section{Sequence protocol} \begin{cfuncdesc}{int}{PySequence_Check}{PyObject *o} Return 1 if the object provides sequence protocol, and 0 otherwise. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PySequence_Concat}{PyObject *o1, PyObject *o2} Return the concatination of \code{o1} and \code{o2} on success, and \NULL{} on failure. This is the equivalent of the Python expression: \code{o1+o2}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PySequence_Repeat}{PyObject *o, int count} Return the result of repeating sequence object \code{o} \code{count} times, or \NULL{} on failure. This is the equivalent of the Python expression: \code{o*count}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PySequence_GetItem}{PyObject *o, int i} Return the ith element of \code{o}, or \NULL{} on failure. This is the equivalent of the Python expression: \code{o[i]}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PySequence_GetSlice}{PyObject *o, int i1, int i2} Return the slice of sequence object \code{o} between \code{i1} and \code{i2}, or \NULL{} on failure. This is the equivalent of the Python expression, \code{o[i1:i2]}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PySequence_SetItem}{PyObject *o, int i, PyObject *v} Assign object \code{v} to the \code{i}th element of \code{o}. Returns -1 on failure. This is the equivalent of the Python statement, \code{o[i]=v}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PySequence_DelItem}{PyObject *o, int i} Delete the \code{i}th element of object \code{v}. Returns -1 on failure. This is the equivalent of the Python statement: \code{del o[i]}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PySequence_SetSlice}{PyObject *o, int i1, int i2, PyObject *v} Assign the sequence object \code{v} to the slice in sequence object \code{o} from \code{i1} to \code{i2}. This is the equivalent of the Python statement, \code{o[i1:i2]=v}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PySequence_DelSlice}{PyObject *o, int i1, int i2} Delete the slice in sequence object, \code{o}, from \code{i1} to \code{i2}. Returns -1 on failure. This is the equivalent of the Python statement: \code{del o[i1:i2]}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PySequence_Tuple}{PyObject *o} Returns the \code{o} as a tuple on success, and \NULL{} on failure. This is equivalent to the Python expression: \code{tuple(o)}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PySequence_Count}{PyObject *o, PyObject *value} Return the number of occurrences of \code{value} on \code{o}, that is, return the number of keys for which \code{o[key]==value}. On failure, return -1. This is equivalent to the Python expression: \code{o.count(value)}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PySequence_In}{PyObject *o, PyObject *value} Determine if \code{o} contains \code{value}. If an item in \code{o} is equal to \code{value}, return 1, otherwise return 0. On error, return -1. This is equivalent to the Python expression: \code{value in o}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PySequence_Index}{PyObject *o, PyObject *value} Return the first index for which \code{o[i]==value}. On error, return -1. This is equivalent to the Python expression: \code{o.index(value)}. \end{cfuncdesc} \section{Mapping protocol} \begin{cfuncdesc}{int}{PyMapping_Check}{PyObject *o} Return 1 if the object provides mapping protocol, and 0 otherwise. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyMapping_Length}{PyObject *o} Returns the number of keys in object \code{o} on success, and -1 on failure. For objects that do not provide sequence protocol, this is equivalent to the Python expression: \code{len(o)}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyMapping_DelItemString}{PyObject *o, char *key} Remove the mapping for object \code{key} from the object \code{o}. Return -1 on failure. This is equivalent to the Python statement: \code{del o[key]}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyMapping_DelItem}{PyObject *o, PyObject *key} Remove the mapping for object \code{key} from the object \code{o}. Return -1 on failure. This is equivalent to the Python statement: \code{del o[key]}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyMapping_HasKeyString}{PyObject *o, char *key} On success, return 1 if the mapping object has the key \code{key} and 0 otherwise. This is equivalent to the Python expression: \code{o.has_key(key)}. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyMapping_HasKey}{PyObject *o, PyObject *key} Return 1 if the mapping object has the key \code{key} and 0 otherwise. This is equivalent to the Python expression: \code{o.has_key(key)}. This function always succeeds. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyMapping_Keys}{PyObject *o} On success, return a list of the keys in object \code{o}. On failure, return \NULL{}. This is equivalent to the Python expression: \code{o.keys()}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyMapping_Values}{PyObject *o} On success, return a list of the values in object \code{o}. On failure, return \NULL{}. This is equivalent to the Python expression: \code{o.values()}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyMapping_Items}{PyObject *o} On success, return a list of the items in object \code{o}, where each item is a tuple containing a key-value pair. On failure, return \NULL{}. This is equivalent to the Python expression: \code{o.items()}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyMapping_Clear}{PyObject *o} Make object \code{o} empty. Returns 1 on success and 0 on failure. This is equivalent to the Python statement: \code{for key in o.keys(): del o[key]} \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyMapping_GetItemString}{PyObject *o, char *key} Return element of \code{o} corresponding to the object \code{key} or \NULL{} on failure. This is the equivalent of the Python expression: \code{o[key]}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyMapping_SetItemString}{PyObject *o, char *key, PyObject *v} Map the object \code{key} to the value \code{v} in object \code{o}. Returns -1 on failure. This is the equivalent of the Python statement: \code{o[key]=v}. \end{cfuncdesc} \section{Constructors} \begin{cfuncdesc}{PyObject*}{PyFile_FromString}{char *file_name, char *mode} On success, returns a new file object that is opened on the file given by \code{file_name}, with a file mode given by \code{mode}, where \code{mode} has the same semantics as the standard C routine, fopen. On failure, return -1. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyFile_FromFile}{FILE *fp, char *file_name, char *mode, int close_on_del} Return a new file object for an already opened standard C file pointer, \code{fp}. A file name, \code{file_name}, and open mode, \code{mode}, must be provided as well as a flag, \code{close_on_del}, that indicates whether the file is to be closed when the file object is destroyed. On failure, return -1. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyFloat_FromDouble}{double v} Returns a new float object with the value \code{v} on success, and \NULL{} on failure. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyInt_FromLong}{long v} Returns a new int object with the value \code{v} on success, and \NULL{} on failure. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyList_New}{int l} Returns a new list of length \code{l} on success, and \NULL{} on failure. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyLong_FromLong}{long v} Returns a new long object with the value \code{v} on success, and \NULL{} on failure. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyLong_FromDouble}{double v} Returns a new long object with the value \code{v} on success, and \NULL{} on failure. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyDict_New}{} Returns a new empty dictionary on success, and \NULL{} on failure. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyString_FromString}{char *v} Returns a new string object with the value \code{v} on success, and \NULL{} on failure. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyString_FromStringAndSize}{char *v, int l} Returns a new string object with the value \code{v} and length \code{l} on success, and \NULL{} on failure. \end{cfuncdesc} \begin{cfuncdesc}{PyObject*}{PyTuple_New}{int l} Returns a new tuple of length \code{l} on success, and \NULL{} on failure. \end{cfuncdesc} \chapter{Concrete Objects Layer} The functions in this chapter are specific to certain Python object types. Passing them an object of the wrong type is not a good idea; if you receive an object from a Python program and you are not sure that it has the right type, you must perform a type check first; e.g. to check that an object is a dictionary, use \code{PyDict_Check()}. \chapter{Defining New Object Types} \begin{cfuncdesc}{PyObject *}{_PyObject_New}{PyTypeObject *type} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{_PyObject_NewVar}{PyTypeObject *type, int size} \end{cfuncdesc} \begin{cfuncdesc}{TYPE}{_PyObject_NEW}{TYPE, PyTypeObject *} \end{cfuncdesc} \begin{cfuncdesc}{TYPE}{_PyObject_NEW_VAR}{TYPE, PyTypeObject *, int size} \end{cfuncdesc} \chapter{Initialization, Finalization, and Threads} % XXX Check argument/return type of all these \begin{cfuncdesc}{void}{Py_Initialize}{} Initialize the Python interpreter. In an application embedding Python, this should be called before using any other Python/C API functions; with the exception of \code{Py_SetProgramName()}, \code{PyEval_InitThreads()}, \code{PyEval_ReleaseLock()}, and \code{PyEval_AcquireLock()}. This initializes the table of loaded modules (\code{sys.modules}), and creates the fundamental modules \code{__builtin__}, \code{__main__} and \code{sys}. It also initializes the module search path (\code{sys.path}). It does not set \code{sys.argv}; use \code{PySys_SetArgv()} for that. It is a fatal error to call it for a second time without calling \code{Py_Finalize()} first. There is no return value; it is a fatal error if the initialization fails. \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_Finalize}{} Undo all initializations made by \code{Py_Initialize()} and subsequent use of Python/C API functions, and destroy all sub-interpreters (see \code{Py_NewInterpreter()} below) that were created and not yet destroyed since the last call to \code{Py_Initialize()}. Ideally, this frees all memory allocated by the Python interpreter. It is a fatal error to call it for a second time without calling \code{Py_Initialize()} again first. There is no return value; errors during finalization are ignored. This function is provided for a number of reasons. An embedding application might want to restart Python without having to restart the application itself. An application that has loaded the Python interpreter from a dynamically loadable library (or DLL) might want to free all memory allocated by Python before unloading the DLL. During a hunt for memory leaks in an application a developer might want to free all memory allocated by Python before exiting from the application. \emph{Bugs and caveats:} The destruction of modules and objects in modules is done in random order; this may cause destructors (\code{__del__} methods) to fail when they depend on other objects (even functions) or modules. Dynamically loaded extension modules loaded by Python are not unloaded. Small amounts of memory allocated by the Python interpreter may not be freed (if you find a leak, please report it). Memory tied up in circular references between objects is not freed. Some memory allocated by extension modules may not be freed. Some extension may not work properly if their initialization routine is called more than once; this can happen if an applcation calls \code{Py_Initialize()} and \code{Py_Finalize()} more than once. \end{cfuncdesc} \begin{cfuncdesc}{PyThreadState *}{Py_NewInterpreter}{} Create a new sub-interpreter. This is an (almost) totally separate environment for the execution of Python code. In particular, the new interpreter has separate, independent versions of all imported modules, including the fundamental modules \code{__builtin__}, \code{__main__} and \code{sys}. The table of loaded modules (\code{sys.modules}) and the module search path (\code{sys.path}) are also separate. The new environment has no \code{sys.argv} variable. It has new standard I/O stream file objects \code{sys.stdin}, \code{sys.stdout} and \code{sys.stderr} (however these refer to the same underlying \code{FILE} structures in the C library). The return value points to the first thread state created in the new sub-interpreter. This thread state is made the current thread state. Note that no actual thread is created; see the discussion of thread states below. If creation of the new interpreter is unsuccessful, \code{NULL} is returned; no exception is set since the exception state is stored in the current thread state and there may not be a current thread state. (Like all other Python/C API functions, the global interpreter lock must be held before calling this function and is still held when it returns; however, unlike most other Python/C API functions, there needn't be a current thread state on entry.) Extension modules are shared between (sub-)interpreters as follows: the first time a particular extension is imported, it is initialized normally, and a (shallow) copy of its module's dictionary is squirreled away. When the same extension is imported by another (sub-)interpreter, a new module is initialized and filled with the contents of this copy; the extension's \code{init} function is not called. Note that this is different from what happens when as extension is imported after the interpreter has been completely re-initialized by calling \code{Py_Finalize()} and \code{Py_Initialize()}; in that case, the extension's \code{init} function \emph{is} called again. \emph{Bugs and caveats:} Because sub-interpreters (and the main interpreter) are part of the same process, the insulation between them isn't perfect -- for example, using low-level file operations like \code{os.close()} they can (accidentally or maliciously) affect each other's open files. Because of the way extensions are shared between (sub-)interpreters, some extensions may not work properly; this is especially likely when the extension makes use of (static) global variables, or when the extension manipulates its module's dictionary after its initialization. It is possible to insert objects created in one sub-interpreter into a namespace of another sub-interpreter; this should be done with great care to avoid sharing user-defined functions, methods, instances or classes between sub-interpreters, since import operations executed by such objects may affect the wrong (sub-)interpreter's dictionary of loaded modules. (XXX This is a hard-to-fix bug that will be addressed in a future release.) \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_EndInterpreter}{PyThreadState *tstate} Destroy the (sub-)interpreter represented by the given thread state. The given thread state must be the current thread state. See the discussion of thread states below. When the call returns, the current thread state is \code{NULL}. All thread states associated with this interpreted are destroyed. (The global interpreter lock must be held before calling this function and is still held when it returns.) \code{Py_Finalize()} will destroy all sub-interpreters that haven't been explicitly destroyed at that point. \end{cfuncdesc} \begin{cfuncdesc}{void}{Py_SetProgramName}{char *name} This function should be called before \code{Py_Initialize()} is called for the first time, if it is called at all. It tells the interpreter the value of the \code{argv[0]} argument to the \code{main()} function of the program. This is used by \code{Py_GetPath()} and some other functions below to find the Python run-time libraries relative to the interpreter executable. The default value is \code{"python"}. The argument should point to a zero-terminated character string in static storage whose contents will not change for the duration of the program's execution. No code in the Python interpreter will change the contents of this storage. \end{cfuncdesc} \begin{cfuncdesc}{char *}{Py_GetProgramName}{} Return the program name set with \code{Py_SetProgramName()}, or the default. The returned string points into static storage; the caller should not modify its value. \end{cfuncdesc} \begin{cfuncdesc}{char *}{Py_GetPrefix}{} Return the ``prefix'' for installed platform-independent files. This is derived through a number of complicated rules from the program name set with \code{Py_SetProgramName()} and some environment variables; for example, if the program name is \code{"/usr/local/bin/python"}, the prefix is \code{"/usr/local"}. The returned string points into static storage; the caller should not modify its value. This corresponds to the \code{prefix} variable in the top-level \code{Makefile} and the \code{--prefix} argument to the \code{configure} script at build time. The value is available to Python code as \code{sys.prefix}. It is only useful on Unix. See also the next function. \end{cfuncdesc} \begin{cfuncdesc}{char *}{Py_GetExecPrefix}{} Return the ``exec-prefix'' for installed platform-\emph{de}pendent files. This is derived through a number of complicated rules from the program name set with \code{Py_SetProgramName()} and some environment variables; for example, if the program name is \code{"/usr/local/bin/python"}, the exec-prefix is \code{"/usr/local"}. The returned string points into static storage; the caller should not modify its value. This corresponds to the \code{exec_prefix} variable in the top-level \code{Makefile} and the \code{--exec_prefix} argument to the \code{configure} script at build time. The value is available to Python code as \code{sys.exec_prefix}. It is only useful on Unix. Background: The exec-prefix differs from the prefix when platform dependent files (such as executables and shared libraries) are installed in a different directory tree. In a typical installation, platform dependent files may be installed in the \code{"/usr/local/plat"} subtree while platform independent may be installed in \code{"/usr/local"}. Generally speaking, a platform is a combination of hardware and software families, e.g. Sparc machines running the Solaris 2.x operating system are considered the same platform, but Intel machines running Solaris 2.x are another platform, and Intel machines running Linux are yet another platform. Different major revisions of the same operating system generally also form different platforms. Non-Unix operating systems are a different story; the installation strategies on those systems are so different that the prefix and exec-prefix are meaningless, and set to the empty string. Note that compiled Python bytecode files are platform independent (but not independent from the Python version by which they were compiled!). System administrators will know how to configure the \code{mount} or \code{automount} programs to share \code{"/usr/local"} between platforms while having \code{"/usr/local/plat"} be a different filesystem for each platform. \end{cfuncdesc} \begin{cfuncdesc}{char *}{Py_GetProgramFullPath}{} Return the full program name of the Python executable; this is computed as a side-effect of deriving the default module search path from the program name (set by \code{Py_SetProgramName()} above). The returned string points into static storage; the caller should not modify its value. The value is available to Python code as \code{sys.executable}. % XXX is that the right sys.name? \end{cfuncdesc} \begin{cfuncdesc}{char *}{Py_GetPath}{} Return the default module search path; this is computed from the program name (set by \code{Py_SetProgramName()} above) and some environment variables. The returned string consists of a series of directory names separated by a platform dependent delimiter character. The delimiter character is \code{':'} on Unix, \code{';'} on DOS/Windows, and \code{'\\n'} (the ASCII newline character) on Macintosh. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as the list \code{sys.path}, which may be modified to change the future search path for loaded modules. % XXX should give the exact rules \end{cfuncdesc} \begin{cfuncdesc}{const char *}{Py_GetVersion}{} Return the version of this Python interpreter. This is a string that looks something like \begin{verbatim} "1.5a3 (#67, Aug 1 1997, 22:34:28) [GCC 2.7.2.2]" \end{verbatim} The first word (up to the first space character) is the current Python version; the first three characters are the major and minor version separated by a period. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as the list \code{sys.version}. \end{cfuncdesc} \begin{cfuncdesc}{const char *}{Py_GetPlatform}{} Return the platform identifier for the current platform. On Unix, this is formed from the ``official'' name of the operating system, converted to lower case, followed by the major revision number; e.g., for Solaris 2.x, which is also known as SunOS 5.x, the value is \code{"sunos5"}. On Macintosh, it is \code{"mac"}. On Windows, it is \code{"win"}. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as \code{sys.platform}. \end{cfuncdesc} \begin{cfuncdesc}{const char *}{Py_GetCopyright}{} Return the official copyright string for the current Python version, for example \code{"Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam"} The returned string points into static storage; the caller should not modify its value. The value is available to Python code as the list \code{sys.copyright}. \end{cfuncdesc} \begin{cfuncdesc}{const char *}{Py_GetCompiler}{} Return an indication of the compiler used to build the current Python version, in square brackets, for example \code{"[GCC 2.7.2.2]"} The returned string points into static storage; the caller should not modify its value. The value is available to Python code as part of the variable \code{sys.version}. \end{cfuncdesc} \begin{cfuncdesc}{const char *}{Py_GetBuildInfo}{} Return information about the sequence number and build date and time of the current Python interpreter instance, for example \begin{verbatim} "#67, Aug 1 1997, 22:34:28" \end{verbatim} The returned string points into static storage; the caller should not modify its value. The value is available to Python code as part of the variable \code{sys.version}. \end{cfuncdesc} \begin{cfuncdesc}{int}{PySys_SetArgv}{int argc, char **argv} % XXX \end{cfuncdesc} % XXX Other PySys thingies (doesn't really belong in this chapter) \section{Thread State and the Global Interpreter Lock} \begin{cfuncdesc}{void}{PyEval_AcquireLock}{} \end{cfuncdesc} \begin{cfuncdesc}{void}{PyEval_ReleaseLock}{} \end{cfuncdesc} \begin{cfuncdesc}{void}{PyEval_AcquireThread}{PyThreadState *tstate} \end{cfuncdesc} \begin{cfuncdesc}{void}{PyEval_ReleaseThread}{PyThreadState *tstate} \end{cfuncdesc} \begin{cfuncdesc}{void}{PyEval_RestoreThread}{PyThreadState *tstate} \end{cfuncdesc} \begin{cfuncdesc}{PyThreadState *}{PyEval_SaveThread}{} \end{cfuncdesc} % XXX These aren't really C functions! \begin{cfuncdesc}{}{Py_BEGIN_ALLOW_THREADS}{} \end{cfuncdesc} \begin{cfuncdesc}{}{Py_BEGIN_END_THREADS}{} \end{cfuncdesc} \begin{cfuncdesc}{}{Py_BEGIN_XXX_THREADS}{} \end{cfuncdesc} XXX To be done: PyObject, PyVarObject PyObject_HEAD, PyObject_HEAD_INIT, PyObject_VAR_HEAD Typedefs: unaryfunc, binaryfunc, ternaryfunc, inquiry, coercion, intargfunc, intintargfunc, intobjargproc, intintobjargproc, objobjargproc, getreadbufferproc, getwritebufferproc, getsegcountproc, destructor, printfunc, getattrfunc, getattrofunc, setattrfunc, setattrofunc, cmpfunc, reprfunc, hashfunc PyNumberMethods PySequenceMethods PyMappingMethods PyBufferProcs PyTypeObject DL_IMPORT PyType_Type Py*_Check Py_None, _Py_NoneStruct _PyObject_New, _PyObject_NewVar PyObject_NEW, PyObject_NEW_VAR \chapter{Specific Data Types} This chapter describes the functions that deal with specific types of Python objects. It is structured like the ``family tree'' of Python object types. \section{Fundamental Objects} This section describes Python type objects and the singleton object \code{None}. \subsection{Type Objects} \begin{ctypedesc}{PyTypeObject} \end{ctypedesc} \begin{cvardesc}{PyObject *}{PyType_Type} \end{cvardesc} \subsection{The None Object} \begin{cvardesc}{PyObject *}{Py_None} macro \end{cvardesc} \section{Sequence Objects} Generic operations on sequence objects were discussed in the previous chapter; this section deals with the specific kinds of sequence objects that are intrinsuc to the Python language. \subsection{String Objects} \begin{ctypedesc}{PyStringObject} This subtype of \code{PyObject} represents a Python string object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyString_Type} This instance of \code{PyTypeObject} represents the Python string type. \end{cvardesc} \begin{cfuncdesc}{int}{PyString_Check}{PyObject *o} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyString_FromStringAndSize}{const char *, int} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyString_FromString}{const char *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyString_Size}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{char *}{PyString_AsString}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{void}{PyString_Concat}{PyObject **, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{void}{PyString_ConcatAndDel}{PyObject **, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{int}{_PyString_Resize}{PyObject **, int} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyString_Format}{PyObject *, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{void}{PyString_InternInPlace}{PyObject **} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyString_InternFromString}{const char *} \end{cfuncdesc} \begin{cfuncdesc}{char *}{PyString_AS_STRING}{PyStringObject *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyString_GET_SIZE}{PyStringObject *} \end{cfuncdesc} \subsection{Tuple Objects} \begin{ctypedesc}{PyTupleObject} This subtype of \code{PyObject} represents a Python tuple object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyTuple_Type} This instance of \code{PyTypeObject} represents the Python tuple type. \end{cvardesc} \begin{cfuncdesc}{int}{PyTuple_Check}{PyObject *p} Return true if the argument is a tuple object. \end{cfuncdesc} \begin{cfuncdesc}{PyTupleObject *}{PyTuple_New}{int s} Return a new tuple object of size \code{s} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyTuple_Size}{PyTupleObject *p} akes a pointer to a tuple object, and returns the size of that tuple. \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyTuple_GetItem}{PyTupleObject *p, int pos} returns the object at position \code{pos} in the tuple pointed to by \code{p}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyTuple_GET_ITEM}{PyTupleObject *p, int pos} does the same, but does no checking of it's arguments. \end{cfuncdesc} \begin{cfuncdesc}{PyTupleObject *}{PyTuple_GetSlice}{PyTupleObject *p, int low, int high} takes a slice of the tuple pointed to by \code{p} from \code{low} to \code{high} and returns it as a new tuple. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyTuple_SetItem}{PyTupleObject *p, int pos, PyObject *o} inserts a reference to object \code{o} at position \code{pos} of the tuple pointed to by \code{p}. It returns 0 on success. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyTuple_SET_ITEM}{PyTupleObject *p, int pos, PyObject *o} does the same, but does no error checking, and should \emph{only} be used to fill in brand new tuples. \end{cfuncdesc} \begin{cfuncdesc}{PyTupleObject *}{_PyTuple_Resize}{PyTupleObject *p, int new, int last_is_sticky} can be used to resize a tuple. Because tuples are \emph{supposed} to be immutable, this should only be used if there is only one module referencing the object. Do \emph{not} use this if the tuple may already be known to some other part of the code. \code{last_is_sticky} is a flag - if set, the tuple will grow or shrink at the front, otherwise it will grow or shrink at the end. Think of this as destroying the old tuple and creating a new one, only more efficiently. \end{cfuncdesc} \subsection{List Objects} \begin{ctypedesc}{PyListObject} This subtype of \code{PyObject} represents a Python list object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyList_Type} This instance of \code{PyTypeObject} represents the Python list type. \end{cvardesc} \begin{cfuncdesc}{int}{PyList_Check}{PyObject *p} returns true if it's argument is a \code{PyListObject} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyList_New}{int size} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyList_Size}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyList_GetItem}{PyObject *, int} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyList_SetItem}{PyObject *, int, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyList_Insert}{PyObject *, int, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyList_Append}{PyObject *, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyList_GetSlice}{PyObject *, int, int} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyList_SetSlice}{PyObject *, int, int, PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyList_Sort}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyList_Reverse}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyList_AsTuple}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyList_GET_ITEM}{PyObject *list, int i} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyList_GET_SIZE}{PyObject *list} \end{cfuncdesc} \section{Mapping Objects} \subsection{Dictionary Objects} \begin{ctypedesc}{PyDictObject} This subtype of \code{PyObject} represents a Python dictionary object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyDict_Type} This instance of \code{PyTypeObject} represents the Python dictionary type. \end{cvardesc} \begin{cfuncdesc}{int}{PyDict_Check}{PyObject *p} returns true if it's argument is a PyDictObject \end{cfuncdesc} \begin{cfuncdesc}{PyDictObject *}{PyDict_New}{} returns a new empty dictionary. \end{cfuncdesc} \begin{cfuncdesc}{void}{PyDict_Clear}{PyDictObject *p} empties an existing dictionary and deletes it. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyDict_SetItem}{PyDictObject *p, PyObject *key, PyObject *val} inserts \code{value} into the dictionary with a key of \code{key}. Both \code{key} and \code{value} should be PyObjects, and \code{key} should be hashable. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyDict_SetItemString}{PyDictObject *p, char *key, PyObject *val} inserts \code{value} into the dictionary using \code{key} as a key. \code{key} should be a char * \end{cfuncdesc} \begin{cfuncdesc}{int}{PyDict_DelItem}{PyDictObject *p, PyObject *key} removes the entry in dictionary \code{p} with key \code{key}. \code{key} is a PyObject. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyDict_DelItemString}{PyDictObject *p, char *key} removes the entry in dictionary \code{p} which has a key specified by the \code{char *}\code{key}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyDict_GetItem}{PyDictObject *p, PyObject *key} returns the object from dictionary \code{p} which has a key \code{key}. \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyDict_GetItemString}{PyDictObject *p, char *key} does the same, but \code{key} is specified as a \code{char *}, rather than a \code{PyObject *}. \end{cfuncdesc} \begin{cfuncdesc}{PyListObject *}{PyDict_Items}{PyDictObject *p} returns a PyListObject containing all the items from the dictionary, as in the mapping method \code{items()} (see the Reference Guide) \end{cfuncdesc} \begin{cfuncdesc}{PyListObject *}{PyDict_Keys}{PyDictObject *p} returns a PyListObject containing all the keys from the dictionary, as in the mapping method \code{keys()} (see the Reference Guide) \end{cfuncdesc} \begin{cfuncdesc}{PyListObject *}{PyDict_Values}{PyDictObject *p} returns a PyListObject containing all the values from the dictionary, as in the mapping method \code{values()} (see the Reference Guide) \end{cfuncdesc} \begin{cfuncdesc}{int}{PyDict_Size}{PyDictObject *p} returns the number of items in the dictionary. \end{cfuncdesc} \begin{cfuncdesc}{int}{PyDict_Next}{PyDictObject *p, int ppos, PyObject **pkey, PyObject **pvalue} \end{cfuncdesc} \section{Numeric Objects} \subsection{Plain Integer Objects} \begin{ctypedesc}{PyIntObject} This subtype of \code{PyObject} represents a Python integer object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyInt_Type} This instance of \code{PyTypeObject} represents the Python plain integer type. \end{cvardesc} \begin{cfuncdesc}{int}{PyInt_Check}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{PyIntObject *}{PyInt_FromLong}{long ival} creates a new integer object with a value of \code{ival}. The current implementation keeps an array of integer objects for all integers between -1 and 100, when you create an int in that range you actually just get back a reference to the existing object. So it should be possible to change the value of 1. I suspect the behaviour of python in this case is undefined. :-) \end{cfuncdesc} \begin{cfuncdesc}{long}{PyInt_AS_LONG}{PyIntObject *io} returns the value of the object \code{io}. \end{cfuncdesc} \begin{cfuncdesc}{long}{PyInt_AsLong}{PyObject *io} will first attempt to cast the object to a PyIntObject, if it is not already one, and the return it's value. \end{cfuncdesc} \begin{cfuncdesc}{long}{PyInt_GetMax}{} returns the systems idea of the largest int it can handle (LONG_MAX, as defined in the system header files) \end{cfuncdesc} \subsection{Long Integer Objects} \begin{ctypedesc}{PyLongObject} This subtype of \code{PyObject} represents a Python long integer object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyLong_Type} This instance of \code{PyTypeObject} represents the Python long integer type. \end{cvardesc} \begin{cfuncdesc}{int}{PyLong_Check}{PyObject *p} returns true if it's argument is a \code{PyLongObject} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyLong_FromLong}{long} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyLong_FromUnsignedLong}{unsigned long} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyLong_FromDouble}{double} \end{cfuncdesc} \begin{cfuncdesc}{long}{PyLong_AsLong}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{unsigned long}{PyLong_AsUnsignedLong}{PyObject } \end{cfuncdesc} \begin{cfuncdesc}{double}{PyLong_AsDouble}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{*PyLong_FromString}{char *, char **, int} \end{cfuncdesc} \subsection{Floating Point Objects} \begin{ctypedesc}{PyFloatObject} This subtype of \code{PyObject} represents a Python floating point object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyFloat_Type} This instance of \code{PyTypeObject} represents the Python floating point type. \end{cvardesc} \begin{cfuncdesc}{int}{PyFloat_Check}{PyObject *p} returns true if it's argument is a \code{PyFloatObject} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyFloat_FromDouble}{double} \end{cfuncdesc} \begin{cfuncdesc}{double}{PyFloat_AsDouble}{PyObject *} \end{cfuncdesc} \begin{cfuncdesc}{double}{PyFloat_AS_DOUBLE}{PyFloatObject *} \end{cfuncdesc} \subsection{Complex Number Objects} \begin{ctypedesc}{Py_complex} typedef struct { double real; double imag; } \end{ctypedesc} \begin{ctypedesc}{PyComplexObject} This subtype of \code{PyObject} represents a Python complex number object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyComplex_Type} This instance of \code{PyTypeObject} represents the Python complex number type. \end{cvardesc} \begin{cfuncdesc}{int}{PyComplex_Check}{PyObject *p} returns true if it's argument is a \code{PyComplexObject} \end{cfuncdesc} \begin{cfuncdesc}{Py_complex}{_Py_c_sum}{Py_complex, Py_complex} \end{cfuncdesc} \begin{cfuncdesc}{Py_complex}{_Py_c_diff}{Py_complex, Py_complex} \end{cfuncdesc} \begin{cfuncdesc}{Py_complex}{_Py_c_neg}{Py_complex} \end{cfuncdesc} \begin{cfuncdesc}{Py_complex}{_Py_c_prod}{Py_complex, Py_complex} \end{cfuncdesc} \begin{cfuncdesc}{Py_complex}{_Py_c_quot}{Py_complex, Py_complex} \end{cfuncdesc} \begin{cfuncdesc}{Py_complex}{_Py_c_pow}{Py_complex, Py_complex} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyComplex_FromCComplex}{Py_complex} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyComplex_FromDoubles}{double real, double imag} \end{cfuncdesc} \begin{cfuncdesc}{double}{PyComplex_RealAsDouble}{PyObject *op} \end{cfuncdesc} \begin{cfuncdesc}{double}{PyComplex_ImagAsDouble}{PyObject *op} \end{cfuncdesc} \begin{cfuncdesc}{Py_complex}{PyComplex_AsCComplex}{PyObject *op} \end{cfuncdesc} \section{Other Objects} \subsection{File Objects} \begin{ctypedesc}{PyFileObject} This subtype of \code{PyObject} represents a Python file object. \end{ctypedesc} \begin{cvardesc}{PyTypeObject}{PyFile_Type} This instance of \code{PyTypeObject} represents the Python file type. \end{cvardesc} \begin{cfuncdesc}{int}{PyFile_Check}{PyObject *p} returns true if it's argument is a \code{PyFileObject} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyFile_FromString}{char *name, char *mode} creates a new PyFileObject pointing to the file specified in \code{name} with the mode specified in \code{mode} \end{cfuncdesc} \begin{cfuncdesc}{PyObject *}{PyFile_FromFile}{FILE *fp, char *name, char *mode, int (*close}) creates a new PyFileObject from the already-open \code{fp}. The function \code{close} will be called when the file should be closed. \end{cfuncdesc} \begin{cfuncdesc}{FILE *}{PyFile_AsFile}{PyFileObject *p} returns the file object associated with \code{p} as a \code{FILE *} \end{cfuncdesc} \begin{cfuncdesc}{PyStringObject *}{PyFile_GetLine}{PyObject *p, int n} undocumented as yet \end{cfuncdesc} \begin{cfuncdesc}{PyStringObject *}{PyFile_Name}{PyObject *p} returns the name of the file specified by \code{p} as a PyStringObject \end{cfuncdesc} \begin{cfuncdesc}{void}{PyFile_SetBufSize}{PyFileObject *p, int n} on systems with \code{setvbuf} only \end{cfuncdesc} \begin{cfuncdesc}{int}{PyFile_SoftSpace}{PyFileObject *p, int newflag} same as the file object method \code{softspace} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyFile_WriteObject}{PyObject *obj, PyFileObject *p} writes object \code{obj} to file object \code{p} \end{cfuncdesc} \begin{cfuncdesc}{int}{PyFile_WriteString}{char *s, PyFileObject *p} writes string \code{s} to file object \code{p} \end{cfuncdesc} \input{api.ind} % Index -- must be last \end{document}