Probable fix (the bug report doesn't have enough info to say for sure).
find_init_module(): Insist on a case-sensitive match for __init__ files.
Given __INIT__.PY instead, find_init_module() thought that was fine, but
the later attempt to do find_module("__INIT__.PY") didn't and its caller
silently suppressed the resulting ImportError. Now find_init_module()
refuses to accept __INIT__.PY to begin with.
Bugfix candidate; specific to platforms with case-insensitive filesystems.
path (with no profile/trace function) through eval_code2() and
eval_frame() avoids several checks.
In the common cases of calls, returns, and exception propogation,
eval_code2() and eval_frame() used to test two values in the
thread-state: the profiling function and the tracing function. With
this change, a flag is set in the thread-state if either of these is
active, allowing a single check to suffice when both are NULL. This
also simplifies the code needed when either function is in use but is
already active (to avoid profiling/tracing the profiler/tracer); the
flag is set to 0 when the profile/trace code is entered, allowing the
same check to suffice for "already in the tracer" for call/return/
exception events.
"return expr" instances in generators (which latter may be generators
due to otherwise invisible "yield" stmts hiding in "if 0" blocks).
This was fun the first time, but this has gotten truly ugly now.
Python interpreter.
This change adds two new C-level APIs: PyEval_SetProfile() and
PyEval_SetTrace(). These can be used to install profile and trace
functions implemented in C, which can operate at much higher speeds
than Python-based functions. The overhead for calling a C-based
profile function is a very small fraction of a percent of the overhead
involved in calling a Python-based function.
The machinery required to call a Python-based profile or trace
function been moved to sysmodule.c, where sys.setprofile() and
sys.setprofile() simply become users of the new interface.
As a side effect, SF bug #436058 is fixed; there is no longer a
_PyTrace_Init() function to declare.
Implement sys.maxunicode.
Explicitly wrap around upper/lower computations for wide Py_UNICODE.
When decoding large characters with UTF-8, represent expected test
results using the \U notation.
- the correct range for the error message is range(0x110000);
- put the 4-byte Unicode-size code inside the same else branch as the
2-byte code, rather generating unreachable code in the 2-byte case.
- Don't hide the 'else' behine the '}'.
(I would prefer that in 4-byte mode, any value should be accepted, but
reasonable people can argue about that, so I'll put that off.)
Add configure option --enable-unicode.
Add config.h macros Py_USING_UNICODE, PY_UNICODE_TYPE, Py_UNICODE_SIZE,
SIZEOF_WCHAR_T.
Define Py_UCS2.
Encode and decode large UTF-8 characters into single Py_UNICODE values
for wide Unicode types; likewise for UTF-16.
Remove test whether sizeof Py_UNICODE is two.
Iterators list and Python-Dev; e.g., these all pass now:
def g1():
try:
return
except:
yield 1
assert list(g1()) == []
def g2():
try:
return
finally:
yield 1
assert list(g2()) == [1]
def g3():
for i in range(3):
yield None
yield None
assert list(g3()) == [None] * 4
compile.c: compile_funcdef and com_return_stmt: Just van Rossum's patch
to compile the same code for "return" regardless of function type (this
goes back to the previous scheme of returning Py_None).
ceval.c: gen_iternext: take a return (but not a yield) of Py_None as
meaning the generator is exhausted.
the next free valuestack slot, not to the base (in America, stacks push
and pop at the top -- they mutate at the bottom in Australia <winK>).
eval_frame(): assert that f_stacktop isn't NULL upon entry.
frame_delloc(): avoid ordered pointer comparisons involving f_stacktop
when f_stacktop is NULL.
reference to f_back when its really needed. Do a little whitespace
normalization as well. This whole file is a big war between tabs and spaces
but now is probably not the time to reindent everything.
NeilS, please check! This came from staring at your genbug.py, but I'm
not sure it plugs all possible holes. Without this, I caught a
frameobject refcount going negative, and it was also the cause (in debug
build) of _Py_ForgetReference's attempt to forget an object with already-
NULL _ob_prev and _ob_next pointers -- although I'm still not entirely
sure how! Part of the difficulty is that frameobjects are stored on a
free list that gets recycled very quickly, so if there's a stray pointer
to one of them it never looks like an insane frameobject (never goes
trough the free() mangling MS debug forces, etc).
and trace functions lazily, which incurs extra argument pushing and checks
in the C overhead for profiling/tracing, create the strings semi-lazily
when the Python code first registers a profile or trace function. This
simplifies the trampoline into the profile/trace functions.
Armin Rigo pointed out that the way the line-# table got built didn't work
for lines generating more than 255 bytes of bytecode. Fixed as he
suggested, plus corresponding changes to pyassem.py, plus added some
long overdue docs about this subtle table to compile.c.
Bugfix candidate (line numbers may be off in tracebacks under -O).
that should be used to cache an interned version of the event
string passed to the profile/trace function. call_trace() will
create interned strings and cache them in using the storage
specified by this additional parameter, avoiding a lot of string
object creation at runtime when using the profiling or tracing
functions.
All call sites are modified to pass the additional parameter, and four
static PyObject* variables are allocated to cache the interned string
objects.
This closes SF patch #431257.
in release builds. Suggested by Martin v. Loewis.
I'm half tempted to macroize PyErr_Occurred too, as the whole thing could
collapse to just
_PyThreadState_Current->curexc_type
In the default branch, keep three ifs that are used if level == 0, the
most common case. Note that first if here is a slight optimization
for the 'O' format.
Second part of SF patch 426072.
Note that lots of code was re-indented.
Replace two-step of convertsimple() and convertsimple1() with
convertsimple() and helper converterr(), which is called to format
error messages when convertsimple() fails. The old code did all the
real work in convertsimple1(), but deferred error message formatting
to conversimple(). The result was paying the price of a second
function call on every call just to format error messages in the
failure cases.
Factor out of the buffer-handling code in convertsimple() and package
it as convertbuffer().
Add two macros to ease readability of Unicode coversions,
UNICODE_DEFAULT_ENCODING() and CONV_UNICODE, an error string.
The convertsimple() routine had awful indentation problems, primarily
because there were two tabs between the case line and the body of the
case statements. This patch reformats the entire function to have a
single tab between case line and case body, which makes the code
easier to read (and consistent with ceval). The introduction of
converterr() exacerbated the problem and prompted this fix.
Also, eliminate non-standard whitespace after opening paren and before
closing paren in a few if statements.
(This checkin is part of SF patch 426072.)
Keyword arguments passed to builtin functions that don't take them are
ignored.
>>> {}.clear(x=2)
>>>
instead of
>>> {}.clear(x=2)
Traceback (most recent call last):
File "<stdin>", line 1, in ?
TypeError: clear() takes no keyword arguments
If we have a PyCFunction (builtin) and it is METH_VARARGS only, load
the args and dispatch to call_cfunction() directly. This provides a
small speedup for perhaps the most common function calls -- builtins.
Store floats and doubles to full precision in marshal.
Test that floats read from .pyc/.pyo closely match those read from .py.
Declare PyFloat_AsString() in floatobject header file.
Add new PyFloat_AsReprString() API function.
Document the functions declared in floatobject.h.
Check for free in class and method only if nested scopes are enabled.
Add assertion to verify that no free variables occur when nested
scopes are disabled.
XXX When should nested scopes by made non-optional on the trunk?
NEEDS DOC CHANGES.
More AttributeErrors transmuted into TypeErrors, in test_b2.py, and,
again, this strikes me as a good thing.
This checkin completes the iterator generalization work that obviously
needed to be done. Can anyone think of others that should be changed?
NEEDS DOC CHANGES.
Possibly contentious: The first time s.next() yields StopIteration (for
a given map argument s) is the last time map() *tries* s.next(). That
is, if other sequence args are longer, s will never again contribute
anything but None values to the result, even if trying s.next() again
could yield another result. This is the same behavior map() used to have
wrt IndexError, so it's the only way to be wholly backward-compatible.
I'm not a fan of letting StopIteration mean "try again later" anyway.
Thomas Wouters
Guido van Rossum
Tim Peters
Fred Drake
Fredrik Lundh
Martin v. Löwis
Neil Schemenauer
Marc-André Lemburg
Jeremy Hylton
Mark Hammond