the function did nothing if the key already exists (if the current value is a
non-NULL pointer).
_testcapi.run_in_subinterp() now correctly sets the new Python thread state of
the current thread when a subinterpreter is created.
The codecs themselves were restored in Python 3.2, this
completes the restoration by adding back the convenience
aliases.
These aliases were originally left out due to confusing
errors when attempting to use them with the text encoding
specific convenience methods. Python 3.4 includes several
improvements to those errors, thus permitting the aliases
to be restored as well.
The utf-16* and utf-32* encoders no longer allow surrogate code points
(U+D800-U+DFFF) to be encoded.
The utf-32* decoders no longer decode byte sequences that correspond to
surrogate code points.
The surrogatepass error handler now works with the utf-16* and utf-32* codecs.
Based on patches by Victor Stinner and Kang-Hao (Kenny) Lu.
- output type errors now redirect users to the type-neutral
convenience functions in the codecs module
- stateless errors that occur during encoding and decoding
will now be automatically wrapped in exceptions that give
the name of the codec involved
importlib.machinery.FileFinder.
While originally moved to stop special-casing '' as PathFinder farther
up the typical call chain now uses the cwd in the instance of '', it
was deemed an unnecessary risk to breaking subclasses of FileFinder to
take the special-casing out.
- cross-references and attributions for inspect changes
- note improvements to inspect and pydoc handling of
metaclasses and dynamic attributes (courtesy of the
enum PEP)
- group all CPython implementation specific changes
into a common section
- add see also links for most of the PEPs
- fix the see also link for the release PEP
- add suitable caveats on Argument Clinic inclusion
- clarify the change to __wrapped__ handling
and stop importlib.machinery.FileFinder treating '' as '.'.
Previous PathFinder transformed '' into '.' which led to __file__ for
modules imported from the cwd to always be relative paths. This meant
the values of the attribute were wrong as soon as the cwd changed.
This change now means that as long as the site module is run (which
makes all entries in sys.path absolute) then all values for __file__
will also be absolute unless it's for __main__ when specified by file
path in a relative way (modules imported by runpy will have an
absolute path).
Now that PathFinder is no longer treating '' as '.' it only makes
sense for FileFinder to stop doing so as well. Now no transformation
is performed for the directory given to the __init__ method.
Thanks to Madison May for the initial patch.
This new pre-initialization API allows embedding
applications like Blender to force a particular
encoding and error handler for the standard IO streams.
Also refactors Modules/_testembed.c to let us start
testing multiple embedding scenarios.
(Initial patch by Bastien Montagne)
This adds EmailMessage and, MIMEPart subclasses of Message
with new API methods, and a ContentManager class used by
the new methods. Also a new policy setting, content_manager.
Patch was reviewed by Stephen J. Turnbull and Serhiy Storchaka,
and reflects their feedback.
I will ideally add some examples of using the new API to the
documentation before the final release.
- Merge from 3.3
- Added to What's New since these are more important in 3.x,
as the bytes<->bytes and str<->str codecs don't fit the
text model convenience methods in 3.x the way they did the
basestring<->basestring methods in the 2.x text model
- Included under Library in Misc/NEWS for the same reason
The GIL must be held to call PyMem_Malloc(), whereas PyOS_Readline() releases
the GIL to read input.
The result of the C callback PyOS_ReadlineFunctionPointer must now be a string
allocated by PyMem_RawMalloc() or PyMem_RawRealloc() (or NULL if an error
occurred), instead of a string allocated by PyMem_Malloc() or PyMem_Realloc().
Fixing this issue was required to setup a hook on PyMem_Malloc(), for example
using the tracemalloc module.
PyOS_Readline() copies the result of PyOS_ReadlineFunctionPointer() into a new
buffer allocated by PyMem_Malloc(). So the public API of PyOS_Readline() does
not change.
The new names are hopefully more descriptive and consistent. If you feel you
don't agree with this change, *please* read issue 17741 first - there's a lot of
discussion in there.
-I
Run Python in isolated mode. This also implies -E and -s. In isolated mode
sys.path contains neither the script’s directory nor the user’s
site-packages directory. All PYTHON* environment variables are ignored,
too. Further restrictions may be imposed to prevent the user from
injecting malicious code.
This was triggered by wanting to make the doctest in email.policy.rst pass;
as_bytes and __bytes__ are clearly useful now that we have BytesGenerator.
Also updated the Message docs to document the policy keyword that was
added in 3.3.
Add new enum:
* PyMemAllocatorDomain
Add new structures:
* PyMemAllocator
* PyObjectArenaAllocator
Add new functions:
* PyMem_RawMalloc(), PyMem_RawRealloc(), PyMem_RawFree()
* PyMem_GetAllocator(), PyMem_SetAllocator()
* PyObject_GetArenaAllocator(), PyObject_SetArenaAllocator()
* PyMem_SetupDebugHooks()
Changes:
* PyMem_Malloc()/PyObject_Realloc() now always call malloc()/realloc(), instead
of calling PyObject_Malloc()/PyObject_Realloc() in debug mode.
* PyObject_Malloc()/PyObject_Realloc() now falls back to
PyMem_Malloc()/PyMem_Realloc() for allocations larger than 512 bytes.
* Redesign debug checks on memory block allocators as hooks, instead of using C
macros
This provides a way to specify arbitrary doctest options when using
the CLI interface to process test files, just as one can when calling
testmod or testfile programmatically.
UnicodeDecodeError as ImportError. That was over-reaching the point of
raising ImportError in get_source() (which is to signal the source
code was not found when it should have). Conflating the two exceptions
with ImportError could lead to masking errors with the source which
should be known outside of whether there was an error simply getting
the source to begin with.
To make sure there is no issue with code that is both Python 2 and 3
compatible, there are no plans to remove the module any sooner than
Python 4 (unless the community moves to Python 3 solidly before then).
Forgot to raise ModuleNotFoundError when None is found in sys.modules.
This led to introducing the C function PyErr_SetImportErrorSubclass()
to make setting ModuleNotFoundError easier.
Also updated the reference docs to mention ModuleNotFoundError
appropriately. Updated the docs for ModuleNotFoundError to mention the
None in sys.modules case.
Lastly, it was noticed that PyErr_SetImportError() was not setting an
exception when returning None in one case. That issue is now fixed.
ImportError.
The exception is raised by import when a module could not be found.
Technically this is defined as no viable loader could be found for the
specified module. This includes ``from ... import`` statements so that
the module usage is consistent for all situations where import
couldn't find what was requested.
This should allow for the common idiom of::
try:
import something
except ImportError:
pass
to be updated to using ModuleNotFoundError and not accidentally mask
ImportError messages that should propagate (e.g. issues with a
loader).
This work was driven by the fact that the ``from ... import``
statement needed to be able to tell the difference between an
ImportError that simply couldn't find a module (and thus silence the
exception so that ceval can raise it) and an ImportError that
represented an actual problem.
Previously __path__ was set to [__name__], but that could lead to bad
results if someone managed to circumvent the frozen importer and
somehow ended up with a finder that thought __name__ was a legit
directory/location.
importlib.abc.Loader.init_module_attrs() and implement
importlib.abc.InspectLoader.load_module().
The importlib.abc.Loader.init_module_attrs() method sets the various
attributes on the module being loaded. It is done unconditionally to
support reloading. Typically people used
importlib.util.module_for_loader, but since that's a decorator there
was no way to override it's actions, so init_module_attrs() came into
existence to allow for overriding. This is also why module_for_loader
is now pending deprecation (having its other use replaced by
importlib.util.module_to_load).
All of this allowed for importlib.abc.InspectLoader.load_module() to
be implemented. At this point you can now implement a loader with
nothing more than get_code() (which only requires get_source();
package support requires is_package()). Thanks to init_module_attrs()
the implementation of load_module() is basically a context manager
containing 2 methods calls, a call to exec(), and a return statement.
* get_instructions generator
* ability to redirect output to a file
* Bytecode and Instruction abstractions
Patch by Nick Coghlan, Ryan Kelly and Thomas Kluyver.
attributes to None.
The long-term goal is for people to be able to rely on these
attributes existing and checking for None to see if they have been
set. Since import itself sets these attributes when a loader does not
the only instances when the attributes are None are from someone
overloading __import__() and not using a loader or someone creating a
module from scratch.
This patch also unifies module initialization. Before you could have
different attributes with default values depending on how the module
object was created. Now the only way to not get the same default set
of attributes is to circumvent initialization by calling
ModuleType.__new__() directly.
Victor Stinner
Serhiy Storchaka
Ezio Melotti
Georg Brandl
Antoine Pitrou
Ned Deily
Nick Coghlan
Eric Snow
Christian Heimes
Brett Cannon
Christian Tismer
R David Murray
Eric V. Smith
Andrew Kuchling
Raymond Hettinger
Eli Bendersky
Charles-François Natali
Richard Oudkerk
Kristjan Valur Jonsson
Terry Jan Reedy
Benjamin Peterson