When WITH_PYMALLOC is defined, define PYMALLOC_DEBUG to enable the debug
allocator. This can be done independent of build type (release or debug).
A debug build automatically defines PYMALLOC_DEBUG when pymalloc is
enabled. It's a detected error to define PYMALLOC_DEBUG when pymalloc
isn't enabled.
Two debugging entry points defined only under PYMALLOC_DEBUG:
+ _PyMalloc_DebugCheckAddress(const void *p) can be used (e.g., from gdb)
to sanity-check a memory block obtained from pymalloc. It sprays
info to stderr (see next) and dies via Py_FatalError if the block is
detectably damaged.
+ _PyMalloc_DebugDumpAddress(const void *p) can be used to spray info
about a debug memory block to stderr.
A tiny start at implementing "API family" checks isn't good for
anything yet.
_PyMalloc_DebugRealloc() has been optimized to do little when the new
size is <= old size. However, if the new size is larger, it really
can't call the underlying realloc() routine without either violating its
contract, or knowing something non-trivial about how the underlying
realloc() works. A memcpy is always done in this case.
This was a disaster for (and only) one of the std tests: test_bufio
creates single text file lines up to a million characters long. On
Windows, fileobject.c's get_line() uses the horridly funky
getline_via_fgets(), which keeps growing and growing a string object
hoping to find a newline. It grew the string object 1000 bytes each
time, so for a million-character string it took approximately forever
(I gave up after a few minutes).
So, also:
fileobject.c, getline_via_fgets(): When a single line is outrageously
long, grow the string object at a mildly exponential rate, instead of
just 1000 bytes at a time.
That's enough so that a debug-build test_bufio finishes in about 5 seconds
on my Win98SE box. I'm curious to try this on Win2K, because it has very
different memory behavior than Win9X, and test_bufio always took a factor
of 10 longer to complete on Win2K. It *could* be that the endless
reallocs were simply killing it on Win2K even in the release build.
and not pymalloc. Add the functions PyMalloc_New, PyMalloc_NewVar, and
PyMalloc_Del that will use pymalloc if it's enabled. If pymalloc is
not enabled then they use the standard malloc (PyMem_*).
Windows some modules are considered (by me, and I don't care what anyone
else thinks about this <wink>) to be part of "the core" despite that they
happen to be compiled into separate DLLs (the "to DLL or not to DLL?"
question on Windows is nearly arbitrary). Making the pymalloc entry
points available to them allows the Windows build to complete without
incident when WITH_PYMALLOC is #define'd.
Note that this isn't unprecedented. Other "private API" functions we
export include _PySequence_IterSearch, _PyEval_SliceIndex, _PyCodec_Lookup,
_Py_ZeroStruct, _Py_TrueStruct, _PyLong_New and _PyModule_Clear.
Another year in the quest to out-guess random C behavior.
Added macros Py_ADJUST_ERANGE1(X) and Py_ADJUST_ERANGE2(X, Y). The latter
is useful for functions with complex results. Two corrections to errno-
after-libm-call are attempted:
1. If the platform set errno to ERANGE due to underflow, clear errno.
Some unknown subset of libm versions and link options do this. It's
allowed by C89, but I never figured anyone would do it.
2. If the platform did not set errno but overflow occurred, force
errno to ERANGE. C89 required setting errno to ERANGE, but C99
doesn't. Some unknown subset of libm versions and link options do
it the C99 way now.
Bugfix candidate, but hold off until some Linux people actually try it,
with and without -lieee. I'll send a help plea to Python-Dev.
platform realloc(p, 0) returns NULL, so MALLOC_ZERO_RETURNS_NULL can
be correctly undefined yet realloc(p, 0) can return NULL anyway.
Prevent realloc(p, 0) doing free(p) and returning NULL via a different
hack. Would probably be better to get rid of MALLOC_ZERO_RETURNS_NULL
entirely.
Bugfix candidate.
alignment gimmick. David Abrahams notes that the standard "long double"
actually requires stricter alignment than "double" on some Tru64 box.
On my box and yours <wink>, it's the same, so no harm done on most
boxes.
the first 3 characters of this string in several places, so for as long
as they remain "2.2" it confuses the heck out of attempts to build 2.3
stuff using distutils.
Removed the ancient "#define ANY void".
Bugfix candidate? Hard call. The bug report claims the existence of
this #define creates conflicts with other packages, which is easy to
believe. OTOH, some extension authors may still be relying on its
presence. I'm afraid you can't win on this one.
PyDict_UpdateFromSeq2(): removed it.
PyDict_MergeFromSeq2(): made it public and documented it.
PyDict_Merge() docs: updated to reveal <wink> that the second
argument can be any mapping object.
type.__module__ behavior.
This adds the module name and a dot in front of the type name in every
type object initializer, except for built-in types (and those that
already had this). Note that it touches lots of Mac modules -- I have
no way to test these but the changes look right. Apologies if they're
not. This also touches the weakref docs, which contains a sample type
object initializer. It also touches the mmap test output, because the
mmap type's repr is included in that output. It touches object.h to
put the correct description in a comment.
Big Hammer to implement -Qnew as PEP 238 says it should work (a global
option affecting all instances of "/").
pydebug.h, main.c, pythonrun.c: define a private _Py_QnewFlag flag, true
iff -Qnew is passed on the command line. This should go away (as the
comments say) when true division becomes The Rule. This is
deliberately not exposed to runtime inspection or modification: it's
a one-way one-shot switch to pretend you're using Python 3.
ceval.c: when _Py_QnewFlag is set, treat BINARY_DIVIDE as
BINARY_TRUE_DIVIDE.
test_{descr, generators, zipfile}.py: fiddle so these pass under
-Qnew too. This was just a matter of s!/!//! in test_generators and
test_zipfile. test_descr was trickier, as testbinop() is passed
assumptions that "/" is the same as calling a "__div__" method; put
a temporary hack there to call "__truediv__" instead when the method
name is "__div__" and 1/2 evaluates to 0.5.
Three standard tests still fail under -Qnew (on Windows; somebody
please try the Linux tests with -Qnew too! Linux runs a whole bunch
of tests Windows doesn't):
test_augassign
test_class
test_coercion
I can't stay awake longer to stare at this (be my guest). Offhand
cures weren't obvious, nor was it even obvious that cures are possible
without major hackery.
Question: when -Qnew is in effect, should calls to __div__ magically
change into calls to __truediv__? See "major hackery" at tail end of
last paragraph <wink>.
There's now a new structmember code, T_OBJECT_EX, which is used for
all __slot__ variables (except __weakref__, which has special behavior
anyway). This new code raises AttributeError when the variable is
NULL rather than converting NULL to None.
use wrappers on all platforms, to make this as consistent as possible x-
platform (in particular, make sure there's at least one \0 byte in
the output buffer). Also document more of the truth about what these do.
getargs.c, seterror(): Three computations of remaining buffer size were
backwards, thus telling PyOS_snprintf the buffer is larger than it
actually is. This matters a lot now that PyOS_snprintf ensures there's a
trailing \0 byte (because it didn't get the truth about the buffer size,
it was storing \0 beyond the true end of the buffer).
sysmodule.c, mywrite(): Simplify, now that PyOS_vsnprintf guarantees to
produce a \0 byte.
const char* instead of char*. The change is conceptually correct, and
indirectly fixes a compiler wng introduced when somebody else innocently
passed a const char* to this function.
RISCOS/Makefile:
include structseq and weakrefobject;
changes to keep command line length below 2048
RISCOS/Modules/riscosmodule.c:
typos from the stat structseq patch
Include/pyport.h:
don't re-#define __attribute__(__x) on RISC OS as it is already defined in c library
object.h: Added PyType_CheckExact macro.
typeobject.c, type_new():
+ Use the new macro.
+ Assert that the arguments have the right types rather than do incomplete
runtime checks "sometimes".
+ If this isn't the 1-argument flavor() of type, and there aren't 3 args
total, produce a "types() takes 1 or 3 args" msg before
PyArg_ParseTupleAndKeywords produces a "takes exactly 3" msg.
PyObject_CallFunctionObArgs() and PyObject_CallMethodObArgs() have the
advantage that no format strings need to be parsed. The CallMethod
variant also avoids creating a new string object in order to retrieve
a method from an object as well.
outer level, the iterator protocol is used for memory-efficiency (the
outer sequence may be very large if fully materialized); at the inner
level, PySequence_Fast() is used for time-efficiency (these should
always be sequences of length 2).
dictobject.c, new functions PyDict_{Merge,Update}FromSeq2. These are
wholly analogous to PyDict_{Merge,Update}, but process a sequence-of-2-
sequences argument instead of a mapping object. For now, I left these
functions file static, so no corresponding doc changes. It's tempting
to change dict.update() to allow a sequence-of-2-seqs argument too.
Also changed the name of dictionary's keyword argument from "mapping"
to "x". Got a better name? "mapping_or_sequence_of_pairs" isn't
attractive, although more so than "mosop" <wink>.
abstract.h, abstract.tex: Added new PySequence_Fast_GET_SIZE function,
much faster than going thru the all-purpose PySequence_Size.
libfuncs.tex:
- Document dictionary().
- Fiddle tuple() and list() to admit that their argument is optional.
- The long-winded repetitions of "a sequence, a container that supports
iteration, or an iterator object" is getting to be a PITA. Many
months ago I suggested factoring this out into "iterable object",
where the definition of that could include being explicit about
generators too (as is, I'm not sure a reader outside of PythonLabs
could guess that "an iterator object" includes a generator call).
- Please check my curly braces -- I'm going blind <0.9 wink>.
abstract.c, PySequence_Tuple(): When PyObject_GetIter() fails, leave
its error msg alone now (the msg it produces has improved since
PySequence_Tuple was generalized to accept iterable objects, and
PySequence_Tuple was also stomping on the msg in cases it shouldn't
have even before PyObject_GetIter grew a better msg).
STRICT_SYSV_CURSES when compiling curses module on HP/UX. Generalize
access to _flags on systems where WINDOW is opaque. Fixes bugs
#432497, #422265, and the curses parts of #467145 and #473150.
Neal Norwitz
Tim Peters
Neil Schemenauer
Andrew M. Kuchling
Martin v. Löwis
Jeremy Hylton
Andrew MacIntyre
Jack Jansen
Fred Drake
Barry Warsaw
Guido van Rossum