(These aren't used yet, but may be coming soon,
and it's easier to keep this tool the same between branches.)
Added a sanity check for all this to compile.c.
Co-authored-by: Irit Katriel <iritkatriel@yahoo.com>
Add COMPILEALL_OPTS variable in Makefile to override compileall
options (default: -j0) in "make install". Also merge the compileall
commands into a single command building PYC files for the all
optimization levels (0, 1, 2) at once.
Co-authored-by: Gregory P. Smith <greg@krypto.org>
The global allocators were stored in 3 static global variables: _PyMem_Raw, _PyMem, and _PyObject. State for the "small block" allocator was stored in another 13. That makes a total of 16 global variables. We are moving all 16 to the _PyRuntimeState struct as part of the work for gh-81057. (If PEP 684 is accepted then we will follow up by moving them all to PyInterpreterState.)
https://github.com/python/cpython/issues/81057
We do the following:
* move the generated _PyUnicode_InitStaticStrings() to its own file
* move the generated _PyStaticObjects_CheckRefcnt() to its own file
* include pycore_global_objects.h in extension modules instead of pycore_runtime_init.h
These changes help us avoid including things that aren't needed.
https://github.com/python/cpython/issues/90868
Remove the distutils package. It was deprecated in Python 3.10 by PEP
632 "Deprecate distutils module". For projects still using distutils
and cannot be updated to something else, the setuptools project can
be installed: it still provides distutils.
* Remove Lib/distutils/ directory
* Remove test_distutils
* Remove references to distutils
* Skip test_check_c_globals and test_peg_generator since they use
distutils
This got introduced in commit 5884449539
to determine if readline is already linked against curses or tinfo in
the setup.py, which is no longer present.
The switch cases (really TARGET(opcode) macros) have been moved from ceval.c to generated_cases.c.h. That file is generated from instruction definitions in bytecodes.c (which impersonates a C file so the C code it contains can be edited without custom support in e.g. VS Code).
The code generator lives in Tools/cases_generator (it has a README.md explaining how it works). The DSL used to describe the instructions is a work in progress, described in https://github.com/faster-cpython/ideas/blob/main/3.12/interpreter_definition.md.
This is surely a work-in-progress. An easy next step could be auto-generating super-instructions.
**IMPORTANT: Merge Conflicts**
If you get a merge conflict for instruction implementations in ceval.c, your best bet is to port your changes to bytecodes.c. That file looks almost the same as the original cases, except instead of `TARGET(NAME)` it uses `inst(NAME)`, and the trailing `DISPATCH()` call is omitted (the code generator adds it automatically).
The test failed on a buildbot because the pointer was only 7 hex characters. To be safe,
I bumped it down to 3: 4 in case we have 32-bit platforms, and 3 in case the pointer is very small.
Relevant tests moved from test_exceptions to test_traceback to be able to
compare both implementations.
Co-authored-by: Carl Friedrich Bolz-Tereick <cfbolz@gmx.de>
⚠️⚠️ Note for reviewers, hackers and fellow systems/low-level/compiler engineers ⚠️⚠️
If you have a lot of experience with this kind of shenanigans and want to improve the **first** version, **please make a PR against my branch** or **reach out by email** or **suggest code changes directly on GitHub**.
If you have any **refinements or optimizations** please, wait until the first version is merged before starting hacking or proposing those so we can keep this PR productive.
- support EMSDK tot-upstream and git releases
- allow WASM assents for wasm64-emscripten and WASI. This makes single file distributions on WASI easier.
- decouple WASM assets from browser builds
* Add support for the BOLT post-link binary optimizer
Using [bolt](https://github.com/llvm/llvm-project/tree/main/bolt)
provides a fairly large speedup without any code or functionality
changes. It provides roughly a 1% speedup on pyperformance, and a
4% improvement on the Pyston web macrobenchmarks.
It is gated behind an `--enable-bolt` configure arg because not all
toolchains and environments are supported. It has been tested on a
Linux x86_64 toolchain, using llvm-bolt built from the LLVM 14.0.6
sources (their binary distribution of this version did not include bolt).
Compared to [a previous attempt](https://github.com/faster-cpython/ideas/issues/224),
this commit uses bolt's preferred "instrumentation" approach, as well as adds some non-PIE
flags which enable much better optimizations from bolt.
The effects of this change are a bit more dependent on CPU microarchitecture
than other changes, since it optimizes i-cache behavior which seems
to be a bit more variable between architectures. The 1%/4% numbers
were collected on an Intel Skylake CPU, and on an AMD Zen 3 CPU I
got a slightly larger speedup (2%/4%), and on a c6i.xlarge EC2 instance
I got a slightly lower speedup (1%/3%).
The low speedup on pyperformance is not entirely unexpected, because
BOLT improves i-cache behavior, and the benchmarks in the pyperformance
suite are small and tend to fit in i-cache.
This change uses the existing pgo profiling task (`python -m test --pgo`),
though I was able to measure about a 1% macrobenchmark improvement by
using the macrobenchmarks as the training task. I personally think that
both the PGO and BOLT tasks should be updated to use macrobenchmarks,
but for the sake of splitting up the work this PR uses the existing pgo task.
* Simplify the build flags
* Add a NEWS entry
* Update Makefile.pre.in
Co-authored-by: Dong-hee Na <donghee.na92@gmail.com>
* Update configure.ac
Co-authored-by: Dong-hee Na <donghee.na92@gmail.com>
* Add myself to ACKS
* Add docs
* Other review comments
* fix tab/space issue
* Make it more clear that --enable-bolt is experimental
* Add link to bolt's github page
Co-authored-by: Dong-hee Na <donghee.na92@gmail.com>
We only statically initialize for core code and builtin modules. Extension modules still create
the tuple at runtime. We'll solve that part of interpreter isolation separately.
This change includes generated code. The non-generated changes are in:
* Tools/clinic/clinic.py
* Python/getargs.c
* Include/cpython/modsupport.h
* Makefile.pre.in (re-generate global strings after running clinic)
* very minor tweaks to Modules/_codecsmodule.c and Python/Python-tokenize.c
All other changes are generated code (clinic, global strings).
Remove the "configure --with-cxx-main" build option: it didn't work
for many years. Remove the MAINCC variable from configure and
Makefile.
The MAINCC variable was added by the issue gh-42471: commit
0f48d98b74. Previously, --with-cxx-main
was named --with-cxx.
Keep CXX and LDCXXSHARED variables, even if they are no longer used
by Python build system.
* gh-95218: Move tests for importlib.resources into test_importlib.resources.
* Also update makefile
* Include test_importlib/resources in code ownership rule.
The `_testcapimodule.c` file is getting too large to work with effectively.
This PR lays out a general structure of how tests can be split up, with more splitting to come later if the structure is OK.
Vectorcall tests aren't the biggest issue -- it's just an area I want to work on next, so I'm starting here.
An issue specific to vectorcall tests is that it wasn't clear that e.g. `MethodDescriptor2` is related to testing vectorcall: the `/* Test PEP 590 */` section had an ambiguous end. Separate file should make things like this much clearer.
OTOH, for some pieces it might not be clear where they should be -- I left `meth_fastcall` with tests of the other calling conventions. IMO, even with the ambiguity it's still worth it to split the huge file up.
I'm not sure about the buildsystem changes, hopefully CI will tell me what's wrong.
@vstinner, @markshannon: Do you think this is a good idea?
Automerge-Triggered-By: GH:encukou
Carl Meyer
Guido van Rossum
Mark Shannon
Zachary Ware
Eric Snow
Kai Zhang
Jason R. Coombs
Victor Stinner
Erlend E. Aasland
Christian Heimes
Miro Hrončok
Brandt Bucher
serge-sans-paille
Brett Cannon
Pablo Galindo Salgado
Jelle Zijlstra
Łukasz Langa
Skip Montanaro
Kevin Modzelewski
Aivars Kalvāns
Petr Viktorin
Kumar Aditya