# hw definition file for processing by chibios_hwdef.py
# for H757

# MCU class and specific type
MCU STM32H7xx STM32H757xx

define CORE_CM7
define SMPS_PWR

# board ID for firmware load
APJ_BOARD_ID 1079

# setup build for a peripheral firmware
env AP_PERIPH 1

FLASH_SIZE_KB 2048

# the location where the bootloader will put the firmware
# the H757 has 128k sectors, assign 2 sectors for BL
FLASH_BOOTLOADER_LOAD_KB 256
FLASH_RESERVE_START_KB 256

# crystal frequency
OSCILLATOR_HZ 24000000

# CAN1
PD0 CAN1_RX CAN1
PD1 CAN1_TX CAN1

# CAN2
PB12 CAN2_RX CAN2
PB13 CAN2_TX CAN2

# SERIAL
PE7 UART7_RX UART7
PE8 UART7_TX UART7

SERIAL_ORDER UART7

# CAN Common
PG1 SLEEPCAN OUTPUT PUSHPULL SPEED_LOW LOW 
PG0 SHUTDOWNCAN OUTPUT PUSHPULL SPEED_LOW LOW

# These are the pins for SWD debugging with a STlinkv2 or black-magic probe.
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD

define CAN_APP_NODE_NAME "com.cubepilot.CubePilotCANMod-periph"

# override following defines as needed
define HAL_USE_ADC FALSE
STORAGE_FLASH_PAGE 14
define HAL_STORAGE_SIZE 32768