using System; using System.Collections.Generic; using System.Drawing; using System.Text; using System.Windows.Forms; using System.Net; using System.Net.Sockets; using System.IO.Ports; using System.IO; using System.Xml; // config file using System.Runtime.InteropServices; // dll imports using log4net; using ZedGraph; // Graphs using ArdupilotMega; using System.Reflection; using ArdupilotMega.Controls; using System.Drawing.Drawing2D; // Written by Michael Oborne namespace ArdupilotMega.GCSViews { public partial class Simulation : MyUserControl { private static readonly ILog log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); MAVLink comPort = MainV2.comPort; UdpClient XplanesSEND; UdpClient MavLink; Socket SimulatorRECV; TcpClient JSBSimSEND; UdpClient SITLSEND; EndPoint Remote = (EndPoint)(new IPEndPoint(IPAddress.Any, 0)); byte[] udpdata = new byte[113 * 9 + 5]; // 113 types - 9 items per type (index+8) + 5 byte header float[][] DATA = new float[113][]; TDataFromAeroSimRC aeroin = new TDataFromAeroSimRC(); DateTime now = DateTime.Now; DateTime lastgpsupdate = DateTime.Now; List position = new List(); int REV_pitch = 1; int REV_roll = 1; int REV_rudder = 1; int GPS_rate = 200; bool displayfull = false; int packetssent = 0; //string logdata = ""; int tickStart = 0; public static int threadrun = 0; string simIP = "127.0.0.1"; int simPort = 49000; int recvPort = 49005; // gps buffer int gpsbufferindex = 0; sitl_fdm[] sitl_fdmbuffer = new sitl_fdm[5]; // set defaults int rollgain = 10000; int pitchgain = 10000; int ruddergain = 10000; int throttlegain = 10000; // for servo graph RollingPointPairList list = new RollingPointPairList(1200); RollingPointPairList list2 = new RollingPointPairList(1200); RollingPointPairList list3 = new RollingPointPairList(1200); RollingPointPairList list4 = new RollingPointPairList(1200); [StructLayout(LayoutKind.Sequential, Pack = 1)] public struct fgIMUData { // GPS public double latitude; public double longitude; public double altitude; public double heading; public double velocityN; public double velocityE; // IMU public double accelX; public double accelY; public double accelZ; public double rateRoll; public double ratePitch; public double rateYaw; // trailer public uint magic; } [StructLayout(LayoutKind.Sequential, Pack = 1)] public struct sitl_fdm { // this is the packet sent by the simulator // to the APM executable to update the simulator state // All values are little-endian public double latitude, longitude; // degrees public double altitude; // MSL public double heading; // degrees public double speedN, speedE; // m/s public double xAccel, yAccel, zAccel; // m/s/s in body frame public double rollRate, pitchRate, yawRate; // degrees/s/s in earth frame public double rollDeg, pitchDeg, yawDeg; // euler angles, degrees public double airspeed; // m/s public UInt32 magic; // 0x4c56414e }; const int AEROSIMRC_MAX_CHANNELS = 39; //----------------------------------------------------------------------------- // Two main data structures are used. This is the first one: // // This data struct is filled by AeroSIM RC with the simulation data, and sent to the plugin //----------------------------------------------------------------------------- [StructLayout(LayoutKind.Sequential, Pack = 1)] public struct TDataFromAeroSimRC { public ushort nStructSize; // size in bytes of TDataFromAeroSimRC //--------------------- // Integration Time //--------------------- public float Simulation_fIntegrationTimeStep; // integration time step in seconds. This is the simulated time since last call to AeroSIMRC_Plugin_Run() //--------------------- // Channels //--------------------- [MarshalAs( UnmanagedType.ByValArray, SizeConst = AEROSIMRC_MAX_CHANNELS)] public float[] Channel_afValue_TX; // [-1, 1] channel positions at TX sticks (i.e. raw stick positions) [MarshalAs( UnmanagedType.ByValArray, SizeConst = AEROSIMRC_MAX_CHANNELS)] public float[] Channel_afValue_RX; // [-1, 1] channel positions at RX (i.e. after TX mixes) // Use the following constants as indexes for the channel arrays // The simulator uses internally the channel numbers for Transmitter Mode 2 (regardless of mode selected by user) const int CH_AILERON = 0; const int CH_ELEVATOR = 1; const int CH_THROTTLE = 2; const int CH_RUDDER = 3; const int CH_5 = 4; const int CH_6 = 5; const int CH_7 = 6; const int CH_PLUGIN_1 = 22; // This channel is mapped by user to any real channel number const int CH_PLUGIN_2 = 23; // This channel is mapped by user to any real channel number //--------------------- // OSD //--------------------- // Video buffer for OSD is a bitmap, 4 bytes per pixel: R G B A; The first 4 bytes are the Top-Left corner pixel // The size of the OSD Video Buffer is defined in plugin.txt // .OSD_BUFFER_SIZE, in plugin.txt, can be set to one of the following sizes: 512x512, 1024x512 or 1024x1024 // Set OSD_nWindow_DX and OSD_nWindow_DY in struct TDataToAeroSimRC to the actual size to be displayed public IntPtr OSD_pVideoBuffer; //--------------------- // Menu //--------------------- // This variable represent the custom menu status. E.g. 0x000001 means that first menu item is ticked // Command menu item bits are set to 1 when selected, but cleared in the next cycle. // Checkbox menu item bits remain 1 until unchecked by user, or cleared in TDataToAeroSimRC::Menu_nFlags_MenuItem_New_CheckBox_Status public uint Menu_nFlags_MenuItem_Status; //--------------------- // Model Initial Position in current scenario //--------------------- public float Scenario_fInitialModelPosX; public float Scenario_fInitialModelPosY; public float Scenario_fInitialModelPosZ; // (m) Model Initial Position on runway public float Scenario_fInitialModelHeading; public float Scenario_fInitialModelPitch; public float Scenario_fInitialModelRoll; // (m) Model Initial Attitude on runway //--------------------- // WayPoints // The Description string can be freely used to add more information to the waypoint such as Altitude, WP Type (Overfly, Landing, CAP), Bearing, etc. //--------------------- public float Scenario_fWPHome_X; public float Scenario_fWPHome_Y; public float Scenario_fWPHome_Lat; public float Scenario_fWPHome_Long; IntPtr Scenario_strWPHome_Description; // (m, deg, string) public float Scenario_fWPA_X; public float Scenario_fWPA_Y; public float Scenario_fWPA_Lat; public float Scenario_fWPA_Long; IntPtr Scenario_strWPA_Description; // (m, deg, string) public float Scenario_fWPB_X; public float Scenario_fWPB_Y; public float Scenario_fWPB_Lat; public float Scenario_fWPB_Long; IntPtr Scenario_strWPB_Description; // (m, deg, string) public float Scenario_fWPC_X; public float Scenario_fWPC_Y; public float Scenario_fWPC_Lat; public float Scenario_fWPC_Long; IntPtr Scenario_strWPC_Description; // (m, deg, string) public float Scenario_fWPD_X; public float Scenario_fWPD_Y; public float Scenario_fWPD_Lat; public float Scenario_fWPD_Long; IntPtr Scenario_strWPD_Description; // (m, deg, string) //--------------------- // Model data //--------------------- public float Model_fPosX; public float Model_fPosY; public float Model_fPosZ; // m Model absolute position in scenario (X=Right, Y=Front, Z=Up) public float Model_fVelX; public float Model_fVelY; public float Model_fVelZ; // m/s Model velocity public float Model_fAngVelX; public float Model_fAngVelY; public float Model_fAngVelZ; // rad/s Model angular velocity (useful to implement gyroscopes) public float Model_fAccelX; public float Model_fAccelY; public float Model_fAccelZ; // m/s/s Model acceleration (useful to implement accelerometers) public double Model_fLatitude; public double Model_fLongitude; // deg Model Position in Lat/Long coordinates public float Model_fHeightAboveTerrain; // m public float Model_fHeading; // rad [-PI, PI ] 0 = North, PI/2 = East, PI = South, - PI/2 = West public float Model_fPitch; // rad [-PI/2, PI/2] Positive pitch when nose up public float Model_fRoll; // rad [-PI, PI ] Positive roll when right wing Up // Wind public float Model_fWindVelX; public float Model_fWindVelY; public float Model_fWindVelZ; // m/s Velocity of the wind (with gusts) at model position (useful to compute air vel) // Engine/Motor Revs per minute public float Model_fEngine1_RPM; public float Model_fEngine2_RPM; public float Model_fEngine3_RPM; public float Model_fEngine4_RPM; // Battery (electric models) public float Model_fBatteryVoltage; // V public float Model_fBatteryCurrent; // A public float Model_fBatteryConsumedCharge; // Ah public float Model_fBatteryCapacity; // Ah // Fuel (gas & jet models) public float Model_fFuelConsumed; // l public float Model_fFuelTankCapacity; // l // Ver > 3.81 // Screen size public short Win_nScreenSizeDX; public short Win_nScreenSizeDY; // Screen Size, used to resize and reposition simulator window // Model Orientation Matrix public float Model_fAxisRight_x; public float Model_fAxisRight_y; public float Model_fAxisRight_z; public float Model_fAxisFront_x; public float Model_fAxisFront_y; public float Model_fAxisFront_z; public float Model_fAxisUp_x; public float Model_fAxisUp_y; public float Model_fAxisUp_z; // Model data in body frame coordinates (X=Right, Y=Front, Z=Up) public float Model_fVel_Body_X; public float Model_fVel_Body_Y; public float Model_fVel_Body_Z; // m/s Model velocity in body coordinates public float Model_fAngVel_Body_X; public float Model_fAngVel_Body_Y; public float Model_fAngVel_Body_Z; // rad/s Model angular velocity in body coordinates public float Model_fAccel_Body_X; public float Model_fAccel_Body_Y; public float Model_fAccel_Body_Z; // m/s/s Model acceleration in body coordinates // Size in bytes of the allocated OSD buffer (size is defined in plugin.txt in .OSD_BUFFER_SIZE) // The buffer size is 4 x .OSD_VIDEO_BUFFER_SIZE (e.g. 4x512x512 = 1048576 bytes), so you should not write outside that memory. public uint OSD_nSizeOfVideoBuffer; } ~Simulation() { if (threadrun == 1) ConnectComPort_Click(new object(), new EventArgs()); MavLink = null; XplanesSEND = null; SimulatorRECV = null; } public Simulation() { InitializeComponent(); } private void Simulation_Load(object sender, EventArgs e) { timer_servo_graph.Stop(); GPSrate.SelectedIndex = 2; xmlconfig(false); CreateChart(zg1); zg1.Visible = displayfull; CHKgraphpitch.Visible = displayfull; CHKgraphroll.Visible = displayfull; CHKgraphrudder.Visible = displayfull; CHKgraphthrottle.Visible = displayfull; } private void ConnectComPort_Click(object sender, EventArgs e) { if (threadrun == 0) { OutputLog.Clear(); if (MainV2.comPort.BaseStream.IsOpen == false) { CustomMessageBox.Show("Please connect first"); return; } try { quad = new HIL.QuadCopter(); if (RAD_JSBSim.Checked) { simPort = 5124; recvPort = 5123; } SetupUDPRecv(); if (chkSensor.Checked) { SITLSEND = new UdpClient(simIP, 5501); } if (RAD_softXplanes.Checked) { SetupUDPXplanes(); SetupUDPMavLink(); } else { if (RAD_JSBSim.Checked) { System.Diagnostics.ProcessStartInfo _procstartinfo = new System.Diagnostics.ProcessStartInfo(); _procstartinfo.WorkingDirectory = Path.GetDirectoryName(Application.ExecutablePath); _procstartinfo.Arguments = "--realtime --suspend --nice --simulation-rate=1000 --logdirectivefile=jsbsim/fgout.xml --script=jsbsim/rascal_test.xml"; _procstartinfo.FileName = "JSBSim.exe"; // Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar + _procstartinfo.UseShellExecute = true; //_procstartinfo.RedirectStandardOutput = true; System.Diagnostics.Process.Start(_procstartinfo); System.Threading.Thread.Sleep(2000); SetupTcpJSBSim(); // old style } SetupUDPXplanes(); // fg udp style SetupUDPMavLink(); // pass traffic - raw } OutputLog.AppendText("Sim Link Started\n"); } catch (Exception ex) { OutputLog.AppendText("Socket setup problem. Do you have this open already? " + ex.ToString()); } System.Threading.Thread t11 = new System.Threading.Thread(new System.Threading.ThreadStart(mainloop)) { Name = "Main Serial/UDP listener", IsBackground = true }; t11.Start(); timer_servo_graph.Start(); } else { timer_servo_graph.Stop(); threadrun = 0; if (SimulatorRECV != null) SimulatorRECV.Close(); if (SimulatorRECV != null && SimulatorRECV.Connected) SimulatorRECV.Disconnect(true); if (MavLink != null) MavLink.Close(); position.Clear(); if (XplanesSEND != null) XplanesSEND.Close(); // if (comPort.BaseStream.IsOpen) // comPort.stopall(true); OutputLog.AppendText("Sim Link Stopped\n"); System.Threading.Thread.Sleep(1000); Application.DoEvents(); } } /// /// Sets config hash for write on application exit /// /// true/false private void xmlconfig(bool write) { if (write) { ArdupilotMega.MainV2.config["REV_roll"] = CHKREV_roll.Checked.ToString(); ArdupilotMega.MainV2.config["REV_pitch"] = CHKREV_pitch.Checked.ToString(); ArdupilotMega.MainV2.config["REV_rudder"] = CHKREV_rudder.Checked.ToString(); ArdupilotMega.MainV2.config["GPSrate"] = GPSrate.Text; ArdupilotMega.MainV2.config["MAVrollgain"] = TXT_rollgain.Text; ArdupilotMega.MainV2.config["MAVpitchgain"] = TXT_pitchgain.Text; ArdupilotMega.MainV2.config["MAVruddergain"] = TXT_ruddergain.Text; ArdupilotMega.MainV2.config["MAVthrottlegain"] = TXT_throttlegain.Text; ArdupilotMega.MainV2.config["CHKdisplayall"] = CHKdisplayall.Checked.ToString(); ArdupilotMega.MainV2.config["simIP"] = simIP; ArdupilotMega.MainV2.config["recvPort"] = recvPort; ArdupilotMega.MainV2.config["simPort"] = simPort.ToString(); } else { foreach (string key in ArdupilotMega.MainV2.config.Keys) { switch (key) { case "simIP": simIP = ArdupilotMega.MainV2.config[key].ToString(); break; case "simPort": simPort = int.Parse(ArdupilotMega.MainV2.config[key].ToString()); break; case "recvPort": recvPort = int.Parse(ArdupilotMega.MainV2.config[key].ToString()); break; case "REV_roll": CHKREV_roll.Checked = bool.Parse(ArdupilotMega.MainV2.config[key].ToString()); break; case "REV_pitch": CHKREV_pitch.Checked = bool.Parse(ArdupilotMega.MainV2.config[key].ToString()); break; case "REV_rudder": CHKREV_rudder.Checked = bool.Parse(ArdupilotMega.MainV2.config[key].ToString()); break; case "GPSrate": GPSrate.Text = ArdupilotMega.MainV2.config[key].ToString(); break; case "MAVrollgain": TXT_rollgain.Text = ArdupilotMega.MainV2.config[key].ToString(); break; case "MAVpitchgain": TXT_pitchgain.Text = ArdupilotMega.MainV2.config[key].ToString(); break; case "MAVruddergain": TXT_ruddergain.Text = ArdupilotMega.MainV2.config[key].ToString(); break; case "MAVthrottlegain": TXT_throttlegain.Text = ArdupilotMega.MainV2.config[key].ToString(); break; case "CHKdisplayall": CHKdisplayall.Checked = bool.Parse(ArdupilotMega.MainV2.config[key].ToString()); displayfull = CHKdisplayall.Checked; break; default: break; } } } } FGNetFDM lastfdmdata = new FGNetFDM(); const int FG_MAX_ENGINES = 4; const int FG_MAX_WHEELS = 3; const int FG_MAX_TANKS = 4; [StructLayout(LayoutKind.Sequential, Pack = 1)] public struct FGNetFDM { public uint version; // increment when data values change public uint padding; // padding // Positions public double longitude; // geodetic (radians) public double latitude; // geodetic (radians) public double altitude; // above sea level (meters) public float agl; // above ground level (meters) public float phi; // roll (radians) public float theta; // pitch (radians) public float psi; // yaw or true heading (radians) public float alpha; // angle of attack (radians) public float beta; // side slip angle (radians) // Velocities public float phidot; // roll rate (radians/sec) public float thetadot; // pitch rate (radians/sec) public float psidot; // yaw rate (radians/sec) public float vcas; // calibrated airspeed public float climb_rate; // feet per second public float v_north; // north velocity in local/body frame, fps public float v_east; // east velocity in local/body frame, fps public float v_down; // down/vertical velocity in local/body frame, fps public float v_wind_body_north; // north velocity in local/body frame // relative to local airmass, fps public float v_wind_body_east; // east velocity in local/body frame // relative to local airmass, fps public float v_wind_body_down; // down/vertical velocity in local/body // frame relative to local airmass, fps // Accelerations public float A_X_pilot; // X accel in body frame ft/sec^2 public float A_Y_pilot; // Y accel in body frame ft/sec^2 public float A_Z_pilot; // Z accel in body frame ft/sec^2 // Stall public float stall_warning; // 0.0 - 1.0 indicating the amount of stall public float slip_deg; // slip ball deflection // Pressure // Engine status uint num_engines; // Number of valid engines [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] uint[] eng_state;// Engine state (off, cranking, running) [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] rpm; // Engine RPM rev/min [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] fuel_flow; // Fuel flow gallons/hr [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] fuel_px; // Fuel pressure psi [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] egt; // Exhuast gas temp deg F [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] cht; // Cylinder head temp deg F [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] mp_osi; // Manifold pressure [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] tit; // Turbine Inlet Temperature [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] oil_temp; // Oil temp deg F [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_ENGINES)] float[] oil_px; // Oil pressure psi // Consumables uint num_tanks; // Max number of fuel tanks [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_TANKS)] float[] fuel_quantity; // Gear status uint num_wheels; [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_WHEELS)] uint[] wow; [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_WHEELS)] float[] gear_pos; [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_WHEELS)] float[] gear_steer; [MarshalAs(UnmanagedType.ByValArray, SizeConst = FG_MAX_WHEELS)] float[] gear_compression; // Environment uint cur_time; // current unix time // FIXME: make this uint64_t before 2038 int warp; // offset in seconds to unix time float visibility; // visibility in meters (for env. effects) // Control surface positions (normalized values) float elevator; float elevator_trim_tab; float left_flap; float right_flap; float left_aileron; float right_aileron; float rudder; float nose_wheel; float speedbrake; float spoilers; } const float ft2m = (float)(1.0 / 3.2808399); const float rad2deg = (float)(180 / Math.PI); const float deg2rad = (float)(1.0 / rad2deg); const float kts2fps = (float)1.68780986; private void mainloop() { //System.Threading.Thread.CurrentThread.CurrentUICulture = new System.Globalization.CultureInfo("en-US"); //System.Threading.Thread.CurrentThread.CurrentCulture = new System.Globalization.CultureInfo("en-US"); threadrun = 1; Remote = (EndPoint)(new IPEndPoint(IPAddress.Any, 0)); DateTime lastdata = DateTime.MinValue; #if MAVLINK10 // set enable hil status flag - sends base_mode = 0 MainV2.comPort.setMode(new MAVLink.mavlink_set_mode_t() { target_system = MainV2.comPort.sysid }, MAVLink.MAV_MODE_FLAG.HIL_ENABLED); #endif while (threadrun == 1) { if (comPort.BaseStream.IsOpen == false) { break; } // re-request servo data if (!(lastdata.AddSeconds(8) > DateTime.Now)) { try { if (CHK_quad.Checked && !RAD_aerosimrc.Checked)// || chkSensor.Checked && RAD_JSBSim.Checked) { comPort.requestDatastream((byte)ArdupilotMega.MAVLink.MAV_DATA_STREAM.RAW_CONTROLLER, 0); // request servoout } else { comPort.requestDatastream((byte)ArdupilotMega.MAVLink.MAV_DATA_STREAM.RAW_CONTROLLER, 50); // request servoout } } catch { } lastdata = DateTime.Now; // prevent flooding } if (SimulatorRECV.Available > 0) { udpdata = new byte[udpdata.Length]; try { while (SimulatorRECV.Available > 0) { int recv = SimulatorRECV.ReceiveFrom(udpdata, ref Remote); RECVprocess(udpdata, recv, comPort); hzcount++; } } catch { //OutputLog.AppendText("Xplanes Data Problem - You need DATA IN/OUT 3, 4, 17, 18, 19, 20\n" + ex.Message + "\n"); } } if (MavLink != null && MavLink.Client != null && MavLink.Client.Connected && MavLink.Available > 0) { IPEndPoint RemoteIpEndPoint = new IPEndPoint(IPAddress.Any, 0); try { Byte[] receiveBytes = MavLink.Receive(ref RemoteIpEndPoint); comPort.BaseStream.Write(receiveBytes, 0, receiveBytes.Length); } catch { } } if (comPort.BaseStream.IsOpen == false) { break; } try { MainV2.cs.UpdateCurrentSettings(null); // when true this uses alot more cpu time if ((DateTime.Now - simsendtime).TotalMilliseconds > 19) { //hzcount++; simsendtime = DateTime.Now; processArduPilot(); } } catch (Exception ex) { log.Info("SIM Main loop exception " + ex.ToString()); } if (hzcounttime.Second != DateTime.Now.Second) { Console.WriteLine("SIM hz {0}", hzcount); hzcount = 0; hzcounttime = DateTime.Now; } System.Threading.Thread.Sleep(1); // this controls send speed to sim } } int hzcount = 0; DateTime hzcounttime = DateTime.Now; DateTime simsendtime = DateTime.Now; private void SetupUDPRecv() { // setup receiver IPEndPoint ipep = new IPEndPoint(IPAddress.Any, recvPort); SimulatorRECV = new Socket(AddressFamily.InterNetwork, SocketType.Dgram, ProtocolType.Udp); SimulatorRECV.Bind(ipep); OutputLog.AppendText("Listerning on port UDP " + recvPort + " (sim->planner)\n"); } private void SetupTcpJSBSim() { try { JSBSimSEND = new TcpClient(); JSBSimSEND.Client.NoDelay = true; JSBSimSEND.Connect("127.0.0.1", simPort); OutputLog.AppendText("Sending to port TCP " + simPort + " (planner->sim)\n"); //JSBSimSEND.Client.Send(System.Text.Encoding.ASCII.GetBytes("set position/h-agl-ft 0\r\n")); JSBSimSEND.Client.Send(System.Text.Encoding.ASCII.GetBytes("set position/lat-gc-deg " + MainV2.cs.HomeLocation.Lat + "\r\n")); JSBSimSEND.Client.Send(System.Text.Encoding.ASCII.GetBytes("set position/long-gc-deg " + MainV2.cs.HomeLocation.Lng + "\r\n")); JSBSimSEND.Client.Send(System.Text.Encoding.ASCII.GetBytes("set attitude/phi-rad 0\r\n")); JSBSimSEND.Client.Send(System.Text.Encoding.ASCII.GetBytes("set attitude/theta-rad 0\r\n")); JSBSimSEND.Client.Send(System.Text.Encoding.ASCII.GetBytes("set attitude/psi-rad 0\r\n")); JSBSimSEND.Client.Send(System.Text.Encoding.ASCII.GetBytes("info\r\n")); JSBSimSEND.Client.Send(System.Text.Encoding.ASCII.GetBytes("resume\r\n")); } catch { log.Info("JSB console fail"); } } private void SetupUDPXplanes() { // setup sender XplanesSEND = new UdpClient(simIP, simPort); OutputLog.AppendText("Sending to port UDP " + simPort + " (planner->sim)\n"); } private void SetupUDPMavLink() { // setup sender MavLink = new UdpClient("127.0.0.1", 14550); } DateTime oldtime = DateTime.Now; sitl_fdm oldgps = new sitl_fdm(); /// /// Recevied UDP packet, process and send required data to serial port. /// /// Packet /// Length /// Com Port private void RECVprocess(byte[] data, int receviedbytes, ArdupilotMega.MAVLink comPort) { sitl_fdm sitldata = new sitl_fdm(); if (data[0] == 'D' && data[1] == 'A') { // Xplanes sends // 5 byte header // 1 int for the index - numbers on left of output // 8 floats - might be useful. or 0 if not int count = 5; while (count < receviedbytes) { int index = BitConverter.ToInt32(data, count); DATA[index] = new float[8]; DATA[index][0] = BitConverter.ToSingle(data, count + 1 * 4); ; DATA[index][1] = BitConverter.ToSingle(data, count + 2 * 4); ; DATA[index][2] = BitConverter.ToSingle(data, count + 3 * 4); ; DATA[index][3] = BitConverter.ToSingle(data, count + 4 * 4); ; DATA[index][4] = BitConverter.ToSingle(data, count + 5 * 4); ; DATA[index][5] = BitConverter.ToSingle(data, count + 6 * 4); ; DATA[index][6] = BitConverter.ToSingle(data, count + 7 * 4); ; DATA[index][7] = BitConverter.ToSingle(data, count + 8 * 4); ; count += 36; // 8 * float } bool xplane9 = !CHK_xplane10.Checked; if (xplane9) { sitldata.pitchDeg = (DATA[18][0]); sitldata.rollDeg = (DATA[18][1]); sitldata.yawDeg = (DATA[18][2]); sitldata.pitchRate = (DATA[17][0] * rad2deg); sitldata.rollRate = (DATA[17][1] * rad2deg); sitldata.yawRate = (DATA[17][2] * rad2deg); sitldata.heading = ((float)DATA[19][2]); } else { sitldata.pitchDeg = (DATA[17][0]); sitldata.rollDeg = (DATA[17][1]); sitldata.yawDeg = (DATA[17][2]); sitldata.pitchRate = (DATA[16][0] * rad2deg); sitldata.rollRate = (DATA[16][1] * rad2deg); sitldata.yawRate = (DATA[16][2] * rad2deg); sitldata.heading = (DATA[18][2]); } sitldata.airspeed = ((DATA[3][5] * .44704)); sitldata.latitude = (DATA[20][0]); sitldata.longitude = (DATA[20][1]); sitldata.altitude = (DATA[20][2] * ft2m); sitldata.speedN = DATA[21][3];// (DATA[3][7] * 0.44704 * Math.Sin(sitldata.heading * deg2rad)); sitldata.speedE = -DATA[21][5];// (DATA[3][7] * 0.44704 * Math.Cos(sitldata.heading * deg2rad)); // YLScsDrawing.Drawing3d.Vector3d accel3D = HIL.QuadCopter.RPY_to_XYZ(DATA[18][1], DATA[18][0], 0, -9.8); //DATA[18][2] // float turnrad = (float)(((DATA[3][7] * 0.44704) * (DATA[3][7] * 0.44704) * 1.943844) / (float)(11.26 * Math.Tan(sitldata.rollDeg * deg2rad))) * ft2m; // float centripaccel = (float)((DATA[3][7] * 0.44704) * (DATA[3][7] * 0.44704)) / turnrad; // YLScsDrawing.Drawing3d.Vector3d cent3D = HIL.QuadCopter.RPY_to_XYZ(DATA[18][1] - 90, 0, 0, centripaccel); // accel3D -= cent3D; // sitldata.xAccel = accel3D.X; // sitldata.yAccel = accel3D.Y; // sitldata.zAccel = accel3D.Z; } else if (receviedbytes == 0x64) // FG binary udp { //FlightGear /* fgIMUData imudata2 = data.ByteArrayToStructureBigEndian(0); if (imudata2.magic != 0x4c56414d) return; if (imudata2.latitude == 0) return; chkSensor.Checked = true; #if MAVLINK10 imu.time_usec = ((ulong)DateTime.Now.ToBinary()); #else imu.usec = ((ulong)DateTime.Now.ToBinary()); #endif imu.xacc = ((Int16)(imudata2.accelX * 9808 / 32.2)); imu.xgyro = ((Int16)(imudata2.rateRoll * 17.453293)); imu.xmag = 0; imu.yacc = ((Int16)(imudata2.accelY * 9808 / 32.2)); imu.ygyro = ((Int16)(imudata2.ratePitch * 17.453293)); imu.ymag = 0; imu.zacc = ((Int16)(imudata2.accelZ * 9808 / 32.2)); // + 1000 imu.zgyro = ((Int16)(imudata2.rateYaw * 17.453293)); imu.zmag = 0; #if MAVLINK10 gps.alt = ((int)(imudata2.altitude * ft2m * 1000)); gps.fix_type = 3; gps.cog = (ushort)(Math.Atan2(imudata2.velocityE, imudata2.velocityN) * rad2deg * 100); gps.lat = (int)(imudata2.latitude * 1.0e7); gps.lon = (int)(imudata2.longitude * 1.0e7); gps.time_usec = ((ulong)DateTime.Now.Ticks); gps.vel = (ushort)(Math.Sqrt((imudata2.velocityN * imudata2.velocityN) + (imudata2.velocityE * imudata2.velocityE)) * ft2m * 100); #else gps.alt = ((float)(imudata2.altitude * ft2m)); gps.fix_type = 3; gps.hdg = ((float)Math.Atan2(imudata2.velocityE, imudata2.velocityN) * rad2deg); gps.lat = ((float)imudata2.latitude); gps.lon = ((float)imudata2.longitude); gps.usec = ((ulong)DateTime.Now.Ticks); gps.v = ((float)Math.Sqrt((imudata2.velocityN * imudata2.velocityN) + (imudata2.velocityE * imudata2.velocityE)) * ft2m); #endif //FileStream stream = File.OpenWrite("fgdata.txt"); //stream.Write(data, 0, receviedbytes); //stream.Close(); */ } else if (receviedbytes == 662 || receviedbytes == 658) // 658 = 3.83 662 = 3.91 { aeroin = data.ByteArrayToStructure(0); sitldata.pitchDeg = (aeroin.Model_fPitch * rad2deg); sitldata.rollDeg = (aeroin.Model_fRoll * -1 * rad2deg); sitldata.yawDeg = ((aeroin.Model_fHeading * rad2deg)); sitldata.pitchRate = aeroin.Model_fAngVel_Body_X * rad2deg; sitldata.rollRate = aeroin.Model_fAngVel_Body_Y * rad2deg; sitldata.yawRate = -aeroin.Model_fAngVel_Body_Z * rad2deg; sitldata.xAccel = aeroin.Model_fAccel_Body_X; // pitch sitldata.yAccel = aeroin.Model_fAccel_Body_Y; // roll sitldata.zAccel = aeroin.Model_fAccel_Body_Z; // YLScsDrawing.Drawing3d.Vector3d accel3D = HIL.QuadCopter.RPY_to_XYZ(att.roll, att.pitch, 0, -9.8); //DATA[18][2] sitldata.altitude = aeroin.Model_fPosZ; sitldata.latitude = aeroin.Model_fLatitude; sitldata.longitude = aeroin.Model_fLongitude; sitldata.speedN = aeroin.Model_fVelX; sitldata.speedE = aeroin.Model_fVelY; float xvec = aeroin.Model_fVelY - aeroin.Model_fWindVelY; float yvec = aeroin.Model_fVelX - aeroin.Model_fWindVelX; sitldata.airspeed = ((float)Math.Sqrt((yvec * yvec) + (xvec * xvec))); } else if (receviedbytes == 408) { FGNetFDM fdm = data.ByteArrayToStructureBigEndian(0); lastfdmdata = fdm; sitldata.rollDeg = fdm.phi * rad2deg; sitldata.pitchDeg = fdm.theta * rad2deg; sitldata.yawDeg = fdm.psi * rad2deg; sitldata.rollRate = fdm.phidot * rad2deg; sitldata.pitchRate = fdm.thetadot * rad2deg; sitldata.yawRate = fdm.psidot * rad2deg; sitldata.xAccel = (fdm.A_X_pilot * 9.808 / 32.2); // pitch sitldata.yAccel = (fdm.A_Y_pilot * 9.808 / 32.2); // roll sitldata.zAccel = (fdm.A_Z_pilot / 32.2 * 9.808); sitldata.altitude = (fdm.altitude); sitldata.latitude = (fdm.latitude * rad2deg); sitldata.longitude = (fdm.longitude * rad2deg); sitldata.speedN = fdm.v_east * ft2m; sitldata.speedE = fdm.v_north * ft2m; sitldata.airspeed = fdm.vcas * 0.5144444f;// knots to m/s } else { log.Info("Bad Udp Packet " + receviedbytes); return; } // write arduimu to ardupilot if (CHK_quad.Checked && !RAD_aerosimrc.Checked) // quad does its own { return; } if (RAD_JSBSim.Checked && chkSensor.Checked) { byte[] buffer = new byte[1500]; while (JSBSimSEND.Client.Available > 5) { int read = JSBSimSEND.Client.Receive(buffer); } byte[] sitlout = new byte[16 * 8 + 1 * 4]; // 16 * double + 1 * int int a = 0; Array.Copy(BitConverter.GetBytes((double)lastfdmdata.latitude * rad2deg), a, sitlout, a, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.longitude * rad2deg), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.altitude), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.psi * rad2deg), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.v_north * ft2m), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.v_east * ft2m), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.A_X_pilot * ft2m), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.A_Y_pilot * ft2m), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.A_Z_pilot * ft2m), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.phidot * rad2deg), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.thetadot * rad2deg), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.psidot * rad2deg), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.phi * rad2deg), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.theta * rad2deg), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.psi * rad2deg), 0, sitlout, a += 8, 8); Array.Copy(BitConverter.GetBytes((double)lastfdmdata.vcas * ft2m), 0, sitlout, a += 8, 8); // Console.WriteLine(lastfdmdata.theta); Array.Copy(BitConverter.GetBytes((int)0x4c56414e), 0, sitlout, a += 8, 4); SITLSEND.Send(sitlout, sitlout.Length); return; } if (RAD_softXplanes.Checked && chkSensor.Checked) { sitldata.magic = (int)0x4c56414e; byte[] sendme = StructureToByteArray(sitldata); SITLSEND.Send(sendme, sendme.Length); return; } TimeSpan gpsspan = DateTime.Now - lastgpsupdate; // add gps delay if (gpsspan.TotalMilliseconds >= GPS_rate) { lastgpsupdate = DateTime.Now; // save current fix = 3 sitl_fdmbuffer[gpsbufferindex % sitl_fdmbuffer.Length] = sitldata; // Console.WriteLine((gpsbufferindex % gpsbuffer.Length) + " " + ((gpsbufferindex + (gpsbuffer.Length - 1)) % gpsbuffer.Length)); // return buffer index + 5 = (3 + 5) = 8 % 6 = 2 oldgps = sitl_fdmbuffer[(gpsbufferindex + (sitl_fdmbuffer.Length - 1)) % sitl_fdmbuffer.Length]; //comPort.sendPacket(oldgps); gpsbufferindex++; } MAVLink.mavlink_hil_state_t hilstate = new MAVLink.mavlink_hil_state_t(); hilstate.time_usec = (UInt64)DateTime.Now.Ticks; // microsec hilstate.lat = (int)(oldgps.latitude * 1e7); // * 1E7 hilstate.lon = (int)(oldgps.longitude * 1e7); // * 1E7 hilstate.alt = (int)(oldgps.altitude * 1000); // mm // Console.WriteLine(hilstate.alt); hilstate.pitch = (float)sitldata.pitchDeg * deg2rad; // (rad) hilstate.pitchspeed = (float)sitldata.pitchRate * rad2deg; // (rad/s) hilstate.roll = (float)sitldata.rollDeg * deg2rad; // (rad) hilstate.rollspeed = (float)sitldata.rollRate * deg2rad; // (rad/s) hilstate.yaw = (float)sitldata.yawDeg * deg2rad; // (rad) hilstate.yawspeed = (float)sitldata.yawRate * deg2rad; // (rad/s) hilstate.vx = (short)(sitldata.speedN * 100); // m/s * 100 hilstate.vy = (short)(sitldata.speedE * 100); // m/s * 100 hilstate.vz = 0; // m/s * 100 hilstate.xacc = (short)(sitldata.xAccel * 1000); // (mg) hilstate.yacc = (short)(sitldata.yAccel * 1000); // (mg) hilstate.zacc = (short)(sitldata.zAccel * 1000); // (mg) comPort.sendPacket(hilstate); // comPort.sendPacket(oldgps); comPort.sendPacket(new MAVLink.mavlink_vfr_hud_t() { airspeed = (float)sitldata.airspeed } ); MAVLink.mavlink_raw_pressure_t pres = new MAVLink.mavlink_raw_pressure_t(); double calc = (101325 * Math.Pow(1 - 2.25577 * Math.Pow(10, -5) * sitldata.altitude, 5.25588)); // updated from valid gps pres.press_diff1 = (short)(int)(calc - 101325); // 0 alt is 0 pa // comPort.sendPacket(pres); } HIL.QuadCopter quad = new HIL.QuadCopter(); /// /// /// /// rads /// rads /// m /// rads /// rads /// rads /// rads /// -1 to 1 /// -1 to 1 /// -1 to 1 /// 0 to 1 private void updateScreenDisplay(double lat, double lng, double alt, double roll, double pitch, double heading, double yaw, double roll_out, double pitch_out, double rudder_out, double throttle_out) { try { // Update Sim stuff this.Invoke((MethodInvoker)delegate { TXT_servoroll.Text = roll_out.ToString("0.000"); TXT_servopitch.Text = pitch_out.ToString("0.000"); TXT_servorudder.Text = rudder_out.ToString("0.000"); TXT_servothrottle.Text = throttle_out.ToString("0.000"); TXT_lat.Text = (lat * rad2deg).ToString("0.00000"); TXT_long.Text = (lng * rad2deg).ToString("0.00000"); TXT_alt.Text = (alt).ToString("0.00"); TXT_roll.Text = (roll * rad2deg).ToString("0.000"); TXT_pitch.Text = (pitch * rad2deg).ToString("0.000"); TXT_heading.Text = (heading * rad2deg).ToString("0.000"); TXT_yaw.Text = (yaw * rad2deg).ToString("0.000"); TXT_wpdist.Text = MainV2.cs.wp_dist.ToString(); TXT_bererror.Text = MainV2.cs.ber_error.ToString(); TXT_alterror.Text = MainV2.cs.alt_error.ToString(); TXT_WP.Text = MainV2.cs.wpno.ToString(); TXT_control_mode.Text = MainV2.cs.mode; }); } catch { this.Invoke((MethodInvoker)delegate { OutputLog.AppendText("NO SIM data - exep\n"); }); } } private void processArduPilot() { bool heli = CHK_heli.Checked; if (CHK_quad.Checked && !RAD_aerosimrc.Checked) { double[] m = new double[4]; m[0] = (ushort)MainV2.cs.ch1out; m[1] = (ushort)MainV2.cs.ch2out; m[2] = (ushort)MainV2.cs.ch3out; m[3] = (ushort)MainV2.cs.ch4out; if (!RAD_softFlightGear.Checked) { lastfdmdata.latitude = DATA[20][0] * deg2rad; lastfdmdata.longitude = DATA[20][1] * deg2rad; lastfdmdata.altitude = (DATA[20][2]); lastfdmdata.version = 999; } try { if (lastfdmdata.version == 0) return; quad.update(ref m, lastfdmdata); } catch (Exception e) { log.Info("Quad hill error " + e.ToString()); } byte[] FlightGear = new byte[8 * 11];// StructureToByteArray(fg); Array.Copy(BitConverter.GetBytes((double)(m[0])), 0, FlightGear, 0, 8); Array.Copy(BitConverter.GetBytes((double)(m[1])), 0, FlightGear, 8, 8); Array.Copy(BitConverter.GetBytes((double)(m[2])), 0, FlightGear, 16, 8); Array.Copy(BitConverter.GetBytes((double)(m[3])), 0, FlightGear, 24, 8); Array.Copy(BitConverter.GetBytes((double)(quad.latitude)), 0, FlightGear, 32, 8); Array.Copy(BitConverter.GetBytes((double)(quad.longitude)), 0, FlightGear, 40, 8); Array.Copy(BitConverter.GetBytes((double)(quad.altitude * 1 / ft2m)), 0, FlightGear, 48, 8); Array.Copy(BitConverter.GetBytes((double)((quad.altitude - quad.ground_level) * 1 / ft2m)), 0, FlightGear, 56, 8); Array.Copy(BitConverter.GetBytes((double)(quad.roll * rad2deg)), 0, FlightGear, 64, 8); Array.Copy(BitConverter.GetBytes((double)(quad.pitch * rad2deg)), 0, FlightGear, 72, 8); Array.Copy(BitConverter.GetBytes((double)(quad.yaw * rad2deg)), 0, FlightGear, 80, 8); if (RAD_softFlightGear.Checked || RAD_softXplanes.Checked) { Array.Reverse(FlightGear, 0, 8); Array.Reverse(FlightGear, 8, 8); Array.Reverse(FlightGear, 16, 8); Array.Reverse(FlightGear, 24, 8); Array.Reverse(FlightGear, 32, 8); Array.Reverse(FlightGear, 40, 8); Array.Reverse(FlightGear, 48, 8); Array.Reverse(FlightGear, 56, 8); Array.Reverse(FlightGear, 64, 8); Array.Reverse(FlightGear, 72, 8); Array.Reverse(FlightGear, 80, 8); } try { XplanesSEND.Send(FlightGear, FlightGear.Length); } catch (Exception) { log.Info("Socket Write failed, FG closed?"); } updateScreenDisplay(lastfdmdata.latitude, lastfdmdata.longitude, lastfdmdata.altitude * .3048, lastfdmdata.phi, lastfdmdata.theta, lastfdmdata.psi, lastfdmdata.psi, m[0], m[1], m[2], m[3]); return; } float roll_out, pitch_out, throttle_out, rudder_out, collective_out; collective_out = 0; if (heli) { roll_out = (float)MainV2.cs.hilch1 / rollgain; pitch_out = (float)MainV2.cs.hilch2 / pitchgain; throttle_out = 1; rudder_out = (float)MainV2.cs.hilch4 / -ruddergain; collective_out = (float)(MainV2.cs.hilch3 - 1500) / throttlegain; } else { roll_out = (float)MainV2.cs.hilch1 / rollgain; pitch_out = (float)MainV2.cs.hilch2 / pitchgain; throttle_out = ((float)MainV2.cs.hilch3) / throttlegain; rudder_out = (float)MainV2.cs.hilch4 / ruddergain; if (RAD_aerosimrc.Checked && CHK_quad.Checked) { throttle_out = ((float)MainV2.cs.hilch7 / 2 + 5000) / throttlegain; //throttle_out = (float)(MainV2.cs.hilch7 - 1100) / throttlegain; } } // Limit min and max roll_out = Constrain(roll_out, -1, 1); pitch_out = Constrain(pitch_out, -1, 1); rudder_out = Constrain(rudder_out, -1, 1); throttle_out = Constrain(throttle_out, 0, 1); try { if (displayfull) { // This updates the servo graphs double time = (Environment.TickCount - tickStart) / 1000.0; if (CHKgraphroll.Checked) { list.Add(time, roll_out); } else { list.Clear(); } if (CHKgraphpitch.Checked) { list2.Add(time, pitch_out); } else { list2.Clear(); } if (CHKgraphrudder.Checked) { list3.Add(time, rudder_out); } else { list3.Clear(); } if (CHKgraphthrottle.Checked) { if (heli) { list4.Add(time, collective_out); } else { list4.Add(time, throttle_out); } } else { list4.Clear(); } } if (packetssent % 10 == 0) // reduce cpu usage { if (RAD_softXplanes.Checked) { bool xplane9 = !CHK_xplane10.Checked; if (xplane9) { updateScreenDisplay(DATA[20][0] * deg2rad, DATA[20][1] * deg2rad, DATA[20][2] * .3048, DATA[18][1] * deg2rad, DATA[18][0] * deg2rad, DATA[19][2] * deg2rad, DATA[18][2] * deg2rad, roll_out, pitch_out, rudder_out, throttle_out); } else { updateScreenDisplay(DATA[20][0] * deg2rad, DATA[20][1] * deg2rad, DATA[20][2] * .3048, DATA[17][1] * deg2rad, DATA[17][0] * deg2rad, DATA[18][2] * deg2rad, DATA[17][2] * deg2rad, roll_out, pitch_out, rudder_out, throttle_out); } } if (RAD_softFlightGear.Checked || RAD_JSBSim.Checked) { updateScreenDisplay(lastfdmdata.latitude, lastfdmdata.longitude, lastfdmdata.altitude * .3048, lastfdmdata.phi, lastfdmdata.theta, lastfdmdata.psi, lastfdmdata.psi, roll_out, pitch_out, rudder_out, throttle_out); } if (RAD_aerosimrc.Checked) { updateScreenDisplay(aeroin.Model_fLatitude * deg2rad, aeroin.Model_fLongitude * deg2rad, aeroin.Model_fPosZ, aeroin.Model_fRoll, aeroin.Model_fPitch, aeroin.Model_fHeading, aeroin.Model_fHeading, roll_out, pitch_out, rudder_out, throttle_out); } } } catch (Exception e) { log.Info("Error updateing screen stuff " + e.ToString()); } packetssent++; if (RAD_aerosimrc.Checked) { //AeroSimRC byte[] AeroSimRC = new byte[4 * 8];// StructureToByteArray(fg); Array.Copy(BitConverter.GetBytes((double)(roll_out * REV_roll)), 0, AeroSimRC, 0, 8); Array.Copy(BitConverter.GetBytes((double)(pitch_out * REV_pitch * -1)), 0, AeroSimRC, 8, 8); Array.Copy(BitConverter.GetBytes((double)(rudder_out * REV_rudder)), 0, AeroSimRC, 16, 8); Array.Copy(BitConverter.GetBytes((double)((throttle_out * 2) - 1)), 0, AeroSimRC, 24, 8); if (heli) { Array.Copy(BitConverter.GetBytes((double)(collective_out)), 0, AeroSimRC, 24, 8); } if (CHK_quad.Checked) { //MainV2.cs.ch1out = 1100; //MainV2.cs.ch2out = 1100; //MainV2.cs.ch3out = 1100; //MainV2.cs.ch4out = 1100; //ac // 3 front // 1 left // 4 back // 2 left Array.Copy(BitConverter.GetBytes((double)((MainV2.cs.ch3out - 1100) / 800 * 2 - 1)), 0, AeroSimRC, 0, 8); // motor 1 = front Array.Copy(BitConverter.GetBytes((double)((MainV2.cs.ch1out - 1100) / 800 * 2 - 1)), 0, AeroSimRC, 8, 8); // motor 2 = right Array.Copy(BitConverter.GetBytes((double)((MainV2.cs.ch4out - 1100) / 800 * 2 - 1)), 0, AeroSimRC, 16, 8);// motor 3 = back Array.Copy(BitConverter.GetBytes((double)((MainV2.cs.ch2out - 1100) / 800 * 2 - 1)), 0, AeroSimRC, 24, 8);// motor 4 = left } else { } try { SimulatorRECV.SendTo(AeroSimRC, Remote); } catch { } } //JSBSim if (RAD_JSBSim.Checked) { roll_out = Constrain(roll_out * REV_roll, -1f, 1f); pitch_out = Constrain(-pitch_out * REV_pitch, -1f, 1f); rudder_out = Constrain(rudder_out * REV_rudder, -1f, 1f); throttle_out = Constrain(throttle_out, -0.0f, 1f); string cmd = string.Format("set fcs/aileron-cmd-norm {0}\r\nset fcs/elevator-cmd-norm {1}\r\nset fcs/rudder-cmd-norm {2}\r\nset fcs/throttle-cmd-norm {3}\r\n", roll_out, pitch_out, rudder_out, throttle_out); //Console.Write(cmd); byte[] data = System.Text.Encoding.ASCII.GetBytes(cmd); JSBSimSEND.Client.Send(data); } // Flightgear if (RAD_softFlightGear.Checked) { //if (packetssent % 2 == 0) { return; } // short supply buffer.. seems to reduce lag byte[] FlightGear = new byte[4 * 8];// StructureToByteArray(fg); Array.Copy(BitConverter.GetBytes((double)(roll_out * REV_roll)), 0, FlightGear, 0, 8); Array.Copy(BitConverter.GetBytes((double)(pitch_out * REV_pitch * -1)), 0, FlightGear, 8, 8); Array.Copy(BitConverter.GetBytes((double)(rudder_out * REV_rudder)), 0, FlightGear, 16, 8); Array.Copy(BitConverter.GetBytes((double)(throttle_out)), 0, FlightGear, 24, 8); Array.Reverse(FlightGear, 0, 8); Array.Reverse(FlightGear, 8, 8); Array.Reverse(FlightGear, 16, 8); Array.Reverse(FlightGear, 24, 8); try { XplanesSEND.Send(FlightGear, FlightGear.Length); } catch (Exception) { log.Info("Socket Write failed, FG closed?"); } } // Xplanes if (RAD_softXplanes.Checked) { // sending only 1 packet instead of many. byte[] Xplane = new byte[5 + 36 + 36]; if (heli) { Xplane = new byte[5 + 36 + 36 + 36]; } Xplane[0] = (byte)'D'; Xplane[1] = (byte)'A'; Xplane[2] = (byte)'T'; Xplane[3] = (byte)'A'; Xplane[4] = 0; Array.Copy(BitConverter.GetBytes((int)25), 0, Xplane, 5, 4); // packet index Array.Copy(BitConverter.GetBytes((float)throttle_out), 0, Xplane, 9, 4); // start data Array.Copy(BitConverter.GetBytes((float)throttle_out), 0, Xplane, 13, 4); Array.Copy(BitConverter.GetBytes((float)throttle_out), 0, Xplane, 17, 4); Array.Copy(BitConverter.GetBytes((float)throttle_out), 0, Xplane, 21, 4); Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, 25, 4); Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, 29, 4); Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, 33, 4); Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, 37, 4); // NEXT ONE - control surfaces Array.Copy(BitConverter.GetBytes((int)11), 0, Xplane, 41, 4); // packet index Array.Copy(BitConverter.GetBytes((float)(pitch_out * REV_pitch)), 0, Xplane, 45, 4); // start data Array.Copy(BitConverter.GetBytes((float)(roll_out * REV_roll)), 0, Xplane, 49, 4); Array.Copy(BitConverter.GetBytes((float)(rudder_out * REV_rudder)), 0, Xplane, 53, 4); Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, 57, 4); Array.Copy(BitConverter.GetBytes((float)(roll_out * REV_roll * 0.5)), 0, Xplane, 61, 4); Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, 65, 4); Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, 69, 4); Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, 73, 4); if (heli) { Array.Copy(BitConverter.GetBytes((float)(0)), 0, Xplane, 53, 4); int a = 73 + 4; Array.Copy(BitConverter.GetBytes((int)39), 0, Xplane, a, 4); // packet index a += 4; Array.Copy(BitConverter.GetBytes((float)(12 * collective_out)), 0, Xplane, a, 4); // main rotor 0 - 12 a += 4; Array.Copy(BitConverter.GetBytes((float)(12 * rudder_out)), 0, Xplane, a, 4); // tail rotor -12 - 12 a += 4; Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, a, 4); a += 4; Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, a, 4); a += 4; Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, a, 4); a += 4; Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, a, 4); a += 4; Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, a, 4); a += 4; Array.Copy(BitConverter.GetBytes((int)-999), 0, Xplane, a, 4); } try { XplanesSEND.Send(Xplane, Xplane.Length); } catch (Exception e) { log.Info("Xplanes udp send error " + e.Message); } } } byte[] StructureToByteArray(object obj) { int len = Marshal.SizeOf(obj); byte[] arr = new byte[len]; IntPtr ptr = Marshal.AllocHGlobal(len); Marshal.StructureToPtr(obj, ptr, true); Marshal.Copy(ptr, arr, 0, len); Marshal.FreeHGlobal(ptr); return arr; } private void RAD_softXplanes_CheckedChanged(object sender, EventArgs e) { } private void RAD_softFlightGear_CheckedChanged(object sender, EventArgs e) { } private void CHKREV_roll_CheckedChanged(object sender, EventArgs e) { if (CHKREV_roll.Checked) { REV_roll = -1; } else { REV_roll = 1; } } private void CHKREV_pitch_CheckedChanged(object sender, EventArgs e) { if (CHKREV_pitch.Checked) { REV_pitch = -1; } else { REV_pitch = 1; } } private void CHKREV_rudder_CheckedChanged(object sender, EventArgs e) { if (CHKREV_rudder.Checked) { REV_rudder = -1; } else { REV_rudder = 1; } } private void GPSrate_SelectedIndexChanged(object sender, EventArgs e) { try { GPS_rate = int.Parse(GPSrate.Text); //GPSrate.SelectedItem.ToString()); } catch { } } private void OutputLog_TextChanged(object sender, EventArgs e) { if (OutputLog.TextLength >= 10000) { OutputLog.Text = OutputLog.Text.Substring(OutputLog.TextLength / 2); } // auto scroll OutputLog.SelectionStart = OutputLog.Text.Length; OutputLog.ScrollToCaret(); OutputLog.Refresh(); } private float Constrain(float value, float min, float max) { if (value > max) { value = max; } if (value < min) { value = min; } return value; } private short Constrain(double value, double min, double max) { if (value > max) { value = max; } if (value < min) { value = min; } return (short)value; } public void CreateChart(ZedGraphControl zgc) { GraphPane myPane = zgc.GraphPane; // Set the titles and axis labels myPane.Title.Text = "Servo Output"; myPane.XAxis.Title.Text = "Time"; myPane.YAxis.Title.Text = "Output"; LineItem myCurve; myCurve = myPane.AddCurve("Roll", list, Color.Red, SymbolType.None); myCurve = myPane.AddCurve("Pitch", list2, Color.Blue, SymbolType.None); myCurve = myPane.AddCurve("Rudder", list3, Color.Green, SymbolType.None); myCurve = myPane.AddCurve("Throttle", list4, Color.Orange, SymbolType.None); // Show the x axis grid myPane.XAxis.MajorGrid.IsVisible = true; myPane.XAxis.Scale.Min = 0; myPane.XAxis.Scale.Max = 5; // Make the Y axis scale red //myPane.YAxis.Scale.FontSpec.FontColor = Color.Red; //myPane.YAxis.Title.FontSpec.FontColor = Color.Red; // turn off the opposite tics so the Y tics don't show up on the Y2 axis myPane.YAxis.MajorTic.IsOpposite = false; myPane.YAxis.MinorTic.IsOpposite = false; // Don't display the Y zero line myPane.YAxis.MajorGrid.IsZeroLine = true; // Align the Y axis labels so they are flush to the axis myPane.YAxis.Scale.Align = AlignP.Inside; // Manually set the axis range //myPane.YAxis.Scale.Min = -1; //myPane.YAxis.Scale.Max = 1; // Fill the axis background with a gradient //myPane.Chart.Fill = new Fill(Color.White, Color.LightGray, 45.0f); // Sample at 50ms intervals timer_servo_graph.Interval = 50; timer_servo_graph.Enabled = true; timer_servo_graph.Start(); // Calculate the Axis Scale Ranges zgc.AxisChange(); tickStart = Environment.TickCount; } private void timer1_Tick(object sender, EventArgs e) { // Make sure that the curvelist has at least one curve if (zg1.GraphPane.CurveList.Count <= 0) return; // Get the first CurveItem in the graph LineItem curve = zg1.GraphPane.CurveList[0] as LineItem; if (curve == null) return; // Get the PointPairList IPointListEdit list = curve.Points as IPointListEdit; // If this is null, it means the reference at curve.Points does not // support IPointListEdit, so we won't be able to modify it if (list == null) return; // Time is measured in seconds double time = (Environment.TickCount - tickStart) / 1000.0; // Keep the X scale at a rolling 30 second interval, with one // major step between the max X value and the end of the axis Scale xScale = zg1.GraphPane.XAxis.Scale; if (time > xScale.Max - xScale.MajorStep) { xScale.Max = time + xScale.MajorStep; xScale.Min = xScale.Max - 30.0; } // Make sure the Y axis is rescaled to accommodate actual data try { zg1.AxisChange(); } catch { } // Force a redraw zg1.Invalidate(); } private void SaveSettings_Click(object sender, EventArgs e) { xmlconfig(true); } private void GPSrate_Leave(object sender, EventArgs e) { // user entered values GPSrate_SelectedIndexChanged(sender, e); } private void GPSrate_KeyDown(object sender, KeyEventArgs e) { // user entered values GPSrate_SelectedIndexChanged(sender, e); } private void but_advsettings_Click(object sender, EventArgs e) { InputBox("IP", "Enter Sim pc IP (def 127.0.0.1)", ref simIP); string temp = simPort.ToString(); InputBox("Port", "Enter Sim pc Port (def 49000)", ref temp); simPort = int.Parse(temp); temp = recvPort.ToString(); InputBox("Port", "Enter Planner pc Port (def 49005)", ref temp); recvPort = int.Parse(temp); xmlconfig(true); //Microsoft.VisualBasic.Interaction.InputBox("Enter Xplane pc IP", "IP", "127.0.0.1", -1, -1); //Microsoft.VisualBasic.Interaction.InputBox("Enter Xplane pc IP", "IP", "127.0.0.1", -1, -1); } //from http://www.csharp-examples.net/inputbox/ public static DialogResult InputBox(string title, string promptText, ref string value) { Form form = new Form(); System.Windows.Forms.Label label = new System.Windows.Forms.Label(); TextBox textBox = new TextBox(); Button buttonOk = new Button(); Button buttonCancel = new Button(); form.Text = title; label.Text = promptText; textBox.Text = value; buttonOk.Text = "OK"; buttonCancel.Text = "Cancel"; buttonOk.DialogResult = DialogResult.OK; buttonCancel.DialogResult = DialogResult.Cancel; label.SetBounds(9, 20, 372, 13); textBox.SetBounds(12, 36, 372, 20); buttonOk.SetBounds(228, 72, 75, 23); buttonCancel.SetBounds(309, 72, 75, 23); label.AutoSize = true; textBox.Anchor = textBox.Anchor | AnchorStyles.Right; buttonOk.Anchor = AnchorStyles.Bottom | AnchorStyles.Right; buttonCancel.Anchor = AnchorStyles.Bottom | AnchorStyles.Right; form.ClientSize = new Size(396, 107); form.Controls.AddRange(new Control[] { label, textBox, buttonOk, buttonCancel }); form.ClientSize = new Size(Math.Max(300, label.Right + 10), form.ClientSize.Height); form.FormBorderStyle = FormBorderStyle.FixedDialog; form.StartPosition = FormStartPosition.CenterScreen; form.MinimizeBox = false; form.MaximizeBox = false; form.AcceptButton = buttonOk; form.CancelButton = buttonCancel; DialogResult dialogResult = form.ShowDialog(); if (dialogResult == DialogResult.OK) { value = textBox.Text; } return dialogResult; } private void CHK_quad_CheckedChanged(object sender, EventArgs e) { } private void BUT_startfgquad_Click(object sender, EventArgs e) { string extra = ""; OpenFileDialog ofd = new OpenFileDialog() { Filter = "fgfs|*fgfs*" }; if (File.Exists(@"C:\Program Files (x86)\FlightGear\bin\Win32\fgfs.exe")) { ofd.InitialDirectory = @"C:\Program Files (x86)\FlightGear\bin\Win32\"; extra = " --fg-root=\"C:\\Program Files (x86)\\FlightGear\\data\""; } else if (File.Exists(@"C:\Program Files\FlightGear\bin\Win32\fgfs.exe")) { ofd.InitialDirectory = @"C:\Program Files\FlightGear\bin\Win32\"; extra = " --fg-root=\"C:\\Program Files\\FlightGear\\data\""; } else if (File.Exists(@"C:\Program Files\FlightGear 2.4.0\bin\Win32\fgfs.exe")) { ofd.InitialDirectory = @"C:\Program Files\FlightGear 2.4.0\bin\Win32\"; extra = " --fg-root=\"C:\\Program Files\\FlightGear 2.4.0\\data\""; } else if (File.Exists(@"C:\Program Files (x86)\FlightGear 2.4.0\bin\Win32\fgfs.exe")) { ofd.InitialDirectory = @"C:\Program Files (x86)\FlightGear 2.4.0\bin\Win32\"; extra = " --fg-root=\"C:\\Program Files (x86)\\FlightGear 2.4.0\\data\""; } else if (File.Exists(@"/usr/games/fgfs")) { ofd.InitialDirectory = @"/usr/games"; } if (File.Exists(MainV2.getConfig("fgexe")) || ofd.ShowDialog() == DialogResult.OK) { if (ofd.FileName != "") { MainV2.config["fgexe"] = ofd.FileName; } else { ofd.FileName = MainV2.config["fgexe"].ToString(); } System.Diagnostics.Process P = new System.Diagnostics.Process(); P.StartInfo.FileName = ofd.FileName; P.StartInfo.Arguments = extra + @" --geometry=400x300 --aircraft=arducopter --native-fdm=socket,out,50,127.0.0.1,49005,udp --generic=socket,in,50,127.0.0.1,49000,udp,quadhil --fdm=external --roll=0 --pitch=0 --wind=0@0 --turbulence=0.0 --prop:/sim/frame-rate-throttle-hz111111=30 --timeofday=noon --shading-flat --fog-disable --disable-specular-highlight --disable-skyblend --disable-random-objects --disable-panel --disable-horizon-effect --disable-clouds --disable-anti-alias-hud "; try { P.Start(); } catch { CustomMessageBox.Show("Failed to start FlightGear"); } } } private void BUT_startfgplane_Click(object sender, EventArgs e) { string extra = ""; OpenFileDialog ofd = new OpenFileDialog() { Filter = "fgfs|*fgfs*" }; if (File.Exists(@"C:\Program Files (x86)\FlightGear\bin\Win32\fgfs.exe")) { ofd.InitialDirectory = @"C:\Program Files (x86)\FlightGear\bin\Win32\"; } else if (File.Exists(@"C:\Program Files\FlightGear\bin\Win32\fgfs.exe")) { ofd.InitialDirectory = @"C:\Program Files\FlightGear\bin\Win32\"; } else if (File.Exists(@"C:\Program Files\FlightGear 2.4.0\bin\Win32\fgfs.exe")) { ofd.InitialDirectory = @"C:\Program Files\FlightGear 2.4.0\bin\Win32\"; } else if (File.Exists(@"C:\Program Files (x86)\FlightGear 2.4.0\bin\Win32\fgfs.exe")) { ofd.InitialDirectory = @"C:\Program Files (x86)\FlightGear 2.4.0\bin\Win32\"; } else if (File.Exists(@"/usr/games/fgfs")) { ofd.InitialDirectory = @"/usr/games"; } if (File.Exists(MainV2.getConfig("fgexe")) || ofd.ShowDialog() == DialogResult.OK) { if (ofd.FileName != "") { MainV2.config["fgexe"] = ofd.FileName; } else { ofd.FileName = MainV2.config["fgexe"].ToString(); } if (!MainV2.MONO) { extra = " --fg-root=\"" + Path.GetDirectoryName(ofd.FileName.ToLower().Replace("bin\\win32\\", "")) + "\\data\""; } System.Diagnostics.Process P = new System.Diagnostics.Process(); P.StartInfo.FileName = ofd.FileName; P.StartInfo.Arguments = extra + @" --geometry=400x300 --native-fdm=socket,out,50,127.0.0.1,49005,udp --generic=socket,in,50,127.0.0.1,49000,udp,MAVLink --roll=0 --pitch=0 --wind=0@0 --turbulence=0.0 --prop:/sim/frame-rate-throttle-hz=30 --timeofday=noon --shading-flat --fog-disable --disable-specular-highlight --disable-skyblend --disable-random-objects --disable-panel --disable-horizon-effect --disable-clouds --disable-anti-alias-hud "; try { P.Start(); } catch { CustomMessageBox.Show("Failed to start FlightGear"); } } } private void BUT_startxplane_Click(object sender, EventArgs e) { OpenFileDialog ofd = new OpenFileDialog() { Filter = "X-Plane|*X-Plane*" }; try { ofd.InitialDirectory = Path.GetDirectoryName(MainV2.config["xplaneexe"].ToString()); } catch { } if (File.Exists(MainV2.getConfig("xplaneexe")) || ofd.ShowDialog() == DialogResult.OK) { if (ofd.FileName != "") { MainV2.config["xplaneexe"] = ofd.FileName; } else { ofd.FileName = MainV2.config["xplaneexe"].ToString(); } System.Diagnostics.Process P = new System.Diagnostics.Process(); P.StartInfo.FileName = ofd.FileName; P.StartInfo.Arguments = ""; try { P.Start(); } catch { CustomMessageBox.Show("Failed to start XPlanes"); } } } private void TXT_rollgain_TextChanged(object sender, EventArgs e) { updateGains(); } private void TXT_pitchgain_TextChanged(object sender, EventArgs e) { updateGains(); } private void TXT_ruddergain_TextChanged(object sender, EventArgs e) { updateGains(); } private void TXT_throttlegain_TextChanged(object sender, EventArgs e) { updateGains(); } void updateGains() { try { rollgain = int.Parse(TXT_rollgain.Text); pitchgain = int.Parse(TXT_pitchgain.Text); ruddergain = int.Parse(TXT_ruddergain.Text); throttlegain = int.Parse(TXT_throttlegain.Text); } catch (Exception) { this.Invoke((MethodInvoker)delegate { OutputLog.AppendText("Bad Gains!!!\n"); }); } } private void CHKdisplayall_CheckedChanged(object sender, EventArgs e) { displayfull = CHKdisplayall.Checked; if (displayfull) { //this.Width = 651; timer_servo_graph.Start(); zg1.Visible = true; CHKgraphpitch.Visible = true; CHKgraphroll.Visible = true; CHKgraphrudder.Visible = true; CHKgraphthrottle.Visible = true; } else { //651, 457 //this.Width = 651; //this.Height = 457; timer_servo_graph.Stop(); zg1.Visible = false; CHKgraphpitch.Visible = false; CHKgraphroll.Visible = false; CHKgraphrudder.Visible = false; CHKgraphthrottle.Visible = false; } } private void Simulation_FormClosing(object sender, FormClosingEventArgs e) { timer_servo_graph.Stop(); } } }