<?xml version="1.0"?> <mavlink> <include>common.xml</include> <messages> <message name="NAV_FILTER_BIAS" id="220"> <description>Accelerometer and Gyro biases from the navigation filter</description> <field name="usec" type="uint64_t">Timestamp (microseconds)</field> <field name="accel_0" type="float">b_f[0]</field> <field name="accel_1" type="float">b_f[1]</field> <field name="accel_2" type="float">b_f[2]</field> <field name="gyro_0" type="float">b_f[0]</field> <field name="gyro_1" type="float">b_f[1]</field> <field name="gyro_2" type="float">b_f[2]</field> </message> <message name="REQUEST_RC_CHANNELS" id="221"> <description>Request raw and normalized rc data from the UAV</description> <field name="enabled" type="uint8_t">True: start sending data; False: stop sending data</field> </message> <message name="RADIO_CALIBRATION" id="222"> <description>Complete set of calibration parameters for the radio</description> <field name="aileron" type="float[3]">Aileron setpoints: high, center, low</field> <field name="elevator" type="float[3]">Elevator setpoints: high, center, low</field> <field name="rudder" type="float[3]">Rudder setpoints: high, center, low</field> <field name="gyro" type="float[2]">Tail gyro mode/gain setpoints: heading hold, rate mode</field> <field name="pitch" type="float[5]">Pitch curve setpoints (every 25%)</field> <field name="throttle" type="float[5]">Throttle curve setpoints (every 25%)</field> </message> </messages> </mavlink>