/* ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /* this header is modelled on the one for the Nucleo-144 H743 board from ChibiOS */ #pragma once #ifndef STM32_LSECLK #define STM32_LSECLK 32768U #endif #ifndef STM32_LSEDRV #define STM32_LSEDRV (3U << 3U) #endif /* * General settings. */ #define STM32_NO_INIT FALSE #define STM32_SYS_CK_ENFORCED_VALUE STM32_HSICLK /* * Memory attributes settings. */ #define STM32_NOCACHE_SRAM1_SRAM2 FALSE #define STM32_NOCACHE_SRAM3 TRUE /* * PWR system settings. * Reading STM32 Reference Manual is required. * Register constants are taken from the ST header. */ #define STM32_VOS STM32_VOS_SCALE1 #define STM32_PWR_CR1 (PWR_CR1_SVOS_1 | PWR_CR1_SVOS_0) #define STM32_PWR_CR2 (PWR_CR2_BREN) #define STM32_PWR_CR3 (PWR_CR3_LDOEN | PWR_CR3_USB33DEN) #define STM32_PWR_CPUCR 0 /* * Clock tree static settings. * Reading STM32 Reference Manual is required. */ #define STM32_HSI_ENABLED FALSE #define STM32_LSI_ENABLED FALSE #define STM32_CSI_ENABLED TRUE #define STM32_HSI48_ENABLED TRUE #define STM32_HSE_ENABLED TRUE #define STM32_LSE_ENABLED FALSE #define STM32_HSIDIV STM32_HSIDIV_DIV1 /* * PLLs static settings. * Reading STM32 Reference Manual is required. */ #define STM32_PLLSRC STM32_PLLSRC_HSE_CK #define STM32_PLLCFGR_MASK ~0 /* setup PLLs based on HSE clock */ #if STM32_HSECLK == 8000000U // this gives 400MHz system clock #define STM32_PLL1_DIVM_VALUE 1 #define STM32_PLL2_DIVM_VALUE 1 #define STM32_PLL3_DIVM_VALUE 2 #elif STM32_HSECLK == 16000000U // this gives 400MHz system clock #define STM32_PLL1_DIVM_VALUE 2 #define STM32_PLL2_DIVM_VALUE 2 #define STM32_PLL3_DIVM_VALUE 4 #elif STM32_HSECLK == 24000000U // this gives 400MHz system clock #define STM32_PLL1_DIVM_VALUE 3 #define STM32_PLL2_DIVM_VALUE 3 #define STM32_PLL3_DIVM_VALUE 6 #else #error "Unsupported HSE clock" #endif #if (STM32_HSECLK == 8000000U) || (STM32_HSECLK == 16000000U) || (STM32_HSECLK == 24000000U) // common clock tree for multiples of 8MHz crystals #define STM32_PLL1_DIVN_VALUE 100 #define STM32_PLL1_DIVP_VALUE 2 #define STM32_PLL1_DIVQ_VALUE 8 #define STM32_PLL1_DIVR_VALUE 2 #define STM32_PLL2_DIVN_VALUE 25 #define STM32_PLL2_DIVP_VALUE 2 #define STM32_PLL2_DIVQ_VALUE 2 #define STM32_PLL2_DIVR_VALUE 2 #define STM32_PLL3_DIVN_VALUE 72 #define STM32_PLL3_DIVP_VALUE 3 #define STM32_PLL3_DIVQ_VALUE 6 #define STM32_PLL3_DIVR_VALUE 9 #endif // 8MHz clock multiples #define STM32_PLL1_ENABLED TRUE #define STM32_PLL1_P_ENABLED TRUE #define STM32_PLL1_Q_ENABLED TRUE #define STM32_PLL1_R_ENABLED TRUE #define STM32_PLL1_FRACN_VALUE 0 #define STM32_PLL2_ENABLED TRUE #define STM32_PLL2_P_ENABLED TRUE #define STM32_PLL2_Q_ENABLED TRUE #define STM32_PLL2_R_ENABLED TRUE #define STM32_PLL2_FRACN_VALUE 0 #define STM32_PLL3_ENABLED TRUE #define STM32_PLL3_P_ENABLED TRUE #define STM32_PLL3_Q_ENABLED TRUE #define STM32_PLL3_R_ENABLED TRUE #define STM32_PLL3_FRACN_VALUE 0 /* * Core clocks dynamic settings (can be changed at runtime). * Reading STM32 Reference Manual is required. */ #define STM32_SW STM32_SW_PLL1_P_CK #define STM32_RTCSEL STM32_RTCSEL_NOCLK #define STM32_D1CPRE STM32_D1CPRE_DIV1 #define STM32_D1HPRE STM32_D1HPRE_DIV2 #define STM32_D1PPRE3 STM32_D1PPRE3_DIV2 #define STM32_D2PPRE1 STM32_D2PPRE1_DIV2 #define STM32_D2PPRE2 STM32_D2PPRE2_DIV2 #define STM32_D3PPRE4 STM32_D3PPRE4_DIV2 /* * Peripherals clocks static settings. * Reading STM32 Reference Manual is required. */ #define STM32_MCO1SEL STM32_MCO1SEL_HSE_CK #define STM32_MCO1PRE_VALUE 4 #define STM32_MCO2SEL STM32_MCO2SEL_SYS_CK #define STM32_MCO2PRE_VALUE 4 #define STM32_TIMPRE_ENABLE TRUE #define STM32_HRTIMSEL 0 #define STM32_STOPKERWUCK 0 #define STM32_STOPWUCK 0 #define STM32_RTCPRE_VALUE 8 #define STM32_CKPERSEL STM32_CKPERSEL_HSE_CK #define STM32_SDMMCSEL STM32_SDMMCSEL_PLL1_Q_CK #define STM32_QSPISEL STM32_QSPISEL_HCLK #define STM32_FMCSEL STM32_QSPISEL_HCLK #define STM32_SWPSEL STM32_SWPSEL_PCLK1 #define STM32_FDCANSEL STM32_FDCANSEL_PLL1_Q_CK #define STM32_DFSDM1SEL STM32_DFSDM1SEL_PCLK2 #define STM32_SPDIFSEL STM32_SPDIFSEL_PLL1_Q_CK #define STM32_SPI45SEL STM32_SPI45SEL_PLL2_Q_CK #define STM32_SPI123SEL STM32_SPI123SEL_PLL1_Q_CK #define STM32_SAI23SEL STM32_SAI23SEL_PLL1_Q_CK #define STM32_SAI1SEL STM32_SAI1SEL_PLL1_Q_CK #define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 #define STM32_CECSEL STM32_CECSEL_DISABLE #define STM32_USBSEL STM32_USBSEL_PLL3_Q_CK #define STM32_I2C123SEL STM32_I2C123SEL_PLL3_R_CK #define STM32_RNGSEL STM32_RNGSEL_HSI48_CK #define STM32_USART16SEL STM32_USART16SEL_PCLK2 #define STM32_USART234578SEL STM32_USART234578SEL_PCLK1 #define STM32_SPI6SEL STM32_SPI6SEL_PLL2_Q_CK #define STM32_SAI4BSEL STM32_SAI4BSEL_PLL1_Q_CK #define STM32_SAI4ASEL STM32_SAI4ASEL_PLL1_Q_CK #define STM32_ADCSEL STM32_ADCSEL_PLL3_R_CK #define STM32_LPTIM345SEL STM32_LPTIM345SEL_PCLK4 #define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK4 #define STM32_I2C4SEL STM32_I2C4SEL_PLL3_R_CK #define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK4 #define STM32_SDMMCSEL STM32_SDMMCSEL_PLL1_Q_CK /* * IRQ system settings. */ #define STM32_IRQ_EXTI0_PRIORITY 6 #define STM32_IRQ_EXTI1_PRIORITY 6 #define STM32_IRQ_EXTI2_PRIORITY 6 #define STM32_IRQ_EXTI3_PRIORITY 6 #define STM32_IRQ_EXTI4_PRIORITY 6 #define STM32_IRQ_EXTI5_9_PRIORITY 6 #define STM32_IRQ_EXTI10_15_PRIORITY 6 #define STM32_IRQ_EXTI16_PRIORITY 6 #define STM32_IRQ_EXTI17_PRIORITY 15 #define STM32_IRQ_EXTI18_PRIORITY 6 #define STM32_IRQ_EXTI19_PRIORITY 6 #define STM32_IRQ_EXTI20_PRIORITY 6 #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 /* * ADC driver system settings. */ #define STM32_ADC_DUAL_MODE FALSE #define STM32_ADC_COMPACT_SAMPLES FALSE #define STM32_ADC_USE_ADC12 TRUE #define STM32_ADC_USE_ADC3 FALSE #define STM32_ADC_ADC12_DMA_PRIORITY 2 #define STM32_ADC_ADC3_DMA_PRIORITY 2 #define STM32_ADC_ADC12_IRQ_PRIORITY 5 #define STM32_ADC_ADC3_IRQ_PRIORITY 5 #define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_ADCCK #define STM32_ADC_ADC3_CLOCK_MODE ADC_CCR_CKMODE_ADCCK // we call it ADC1 in hwdef.dat, but driver uses ADC12 for DMA stream #define STM32_ADC_ADC12_DMA_STREAM STM32_ADC_ADC1_DMA_STREAM /* * CAN driver system settings. */ #define STM32_CAN_USE_CAN1 FALSE #define STM32_CAN_USE_CAN2 FALSE #define STM32_CAN_USE_CAN3 FALSE #define STM32_CAN_CAN1_IRQ_PRIORITY 11 #define STM32_CAN_CAN2_IRQ_PRIORITY 11 #define STM32_CAN_CAN3_IRQ_PRIORITY 11 /* * DAC driver system settings. */ #define STM32_DAC_DUAL_MODE FALSE #define STM32_DAC_USE_DAC1_CH1 FALSE #define STM32_DAC_USE_DAC1_CH2 FALSE #define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 #define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 #define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 #define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 /* * GPT driver system settings. */ #define STM32_GPT_USE_TIM1 FALSE #define STM32_GPT_USE_TIM2 FALSE #define STM32_GPT_USE_TIM3 FALSE #define STM32_GPT_USE_TIM4 FALSE #define STM32_GPT_USE_TIM5 FALSE #define STM32_GPT_USE_TIM6 FALSE #define STM32_GPT_USE_TIM7 FALSE #define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM9 FALSE #define STM32_GPT_USE_TIM11 FALSE #define STM32_GPT_USE_TIM12 FALSE #define STM32_GPT_USE_TIM14 FALSE #define STM32_GPT_TIM1_IRQ_PRIORITY 7 #define STM32_GPT_TIM2_IRQ_PRIORITY 7 #define STM32_GPT_TIM3_IRQ_PRIORITY 7 #define STM32_GPT_TIM4_IRQ_PRIORITY 7 #define STM32_GPT_TIM5_IRQ_PRIORITY 7 #define STM32_GPT_TIM6_IRQ_PRIORITY 7 #define STM32_GPT_TIM7_IRQ_PRIORITY 7 #define STM32_GPT_TIM8_IRQ_PRIORITY 7 #define STM32_GPT_TIM9_IRQ_PRIORITY 7 #define STM32_GPT_TIM11_IRQ_PRIORITY 7 #define STM32_GPT_TIM12_IRQ_PRIORITY 7 #define STM32_GPT_TIM14_IRQ_PRIORITY 7 /* * I2C driver system settings. */ #define STM32_I2C_BUSY_TIMEOUT 50 #define STM32_I2C_I2C1_IRQ_PRIORITY 5 #define STM32_I2C_I2C2_IRQ_PRIORITY 5 #define STM32_I2C_I2C3_IRQ_PRIORITY 5 #define STM32_I2C_I2C4_IRQ_PRIORITY 5 #define STM32_I2C_I2C1_DMA_PRIORITY 3 #define STM32_I2C_I2C2_DMA_PRIORITY 3 #define STM32_I2C_I2C3_DMA_PRIORITY 3 #define STM32_I2C_I2C4_DMA_PRIORITY 3 #define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") /* * ICU driver system settings. */ #define STM32_ICU_USE_TIM1 FALSE #define STM32_ICU_USE_TIM2 FALSE #define STM32_ICU_USE_TIM3 FALSE #define STM32_ICU_USE_TIM4 FALSE #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM9 FALSE #define STM32_ICU_TIM1_IRQ_PRIORITY 7 #define STM32_ICU_TIM2_IRQ_PRIORITY 7 #define STM32_ICU_TIM3_IRQ_PRIORITY 7 #define STM32_ICU_TIM4_IRQ_PRIORITY 7 #define STM32_ICU_TIM5_IRQ_PRIORITY 7 #define STM32_ICU_TIM8_IRQ_PRIORITY 7 #define STM32_ICU_TIM9_IRQ_PRIORITY 7 /* * MAC driver system settings. */ #define STM32_MAC_TRANSMIT_BUFFERS 2 #define STM32_MAC_RECEIVE_BUFFERS 4 #define STM32_MAC_BUFFERS_SIZE 1522 #define STM32_MAC_PHY_TIMEOUT 100 #define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE #define STM32_MAC_ETH1_IRQ_PRIORITY 13 #define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 /* * PWM driver system settings. */ #define STM32_PWM_TIM1_IRQ_PRIORITY 7 #define STM32_PWM_TIM2_IRQ_PRIORITY 7 #define STM32_PWM_TIM3_IRQ_PRIORITY 7 #define STM32_PWM_TIM4_IRQ_PRIORITY 7 #define STM32_PWM_TIM5_IRQ_PRIORITY 7 #define STM32_PWM_TIM8_IRQ_PRIORITY 7 #define STM32_PWM_TIM9_IRQ_PRIORITY 7 /* * RTC driver system settings. */ #define STM32_RTC_PRESA_VALUE 32 #define STM32_RTC_PRESS_VALUE 1024 #define STM32_RTC_CR_INIT 0 #define STM32_RTC_TAMPCR_INIT 0 /* * SDC driver system settings. */ #define STM32_SDC_SDMMC_UNALIGNED_SUPPORT TRUE #define STM32_SDC_SDMMC_WRITE_TIMEOUT 1000 #define STM32_SDC_SDMMC_READ_TIMEOUT 1000 #define STM32_SDC_SDMMC_CLOCK_DELAY 10 #define STM32_SDC_SDMMC1_DMA_PRIORITY 3 #define STM32_SDC_SDMMC1_IRQ_PRIORITY 9 /* * SERIAL driver system settings. */ #define STM32_SERIAL_USART1_PRIORITY 12 #define STM32_SERIAL_USART2_PRIORITY 12 #define STM32_SERIAL_USART3_PRIORITY 12 #define STM32_SERIAL_UART4_PRIORITY 12 #define STM32_SERIAL_UART5_PRIORITY 12 #define STM32_SERIAL_USART6_PRIORITY 12 #define STM32_SERIAL_UART7_PRIORITY 12 #define STM32_SERIAL_UART8_PRIORITY 12 #define STM32_UART1CLK STM32_PCLK1 #define STM32_UART2CLK STM32_PCLK1 #define STM32_UART3CLK STM32_PCLK1 #define STM32_UART4CLK STM32_PCLK1 #define STM32_UART5CLK STM32_PCLK1 #define STM32_UART6CLK STM32_PCLK1 #define STM32_UART7CLK STM32_PCLK1 #define STM32_UART8CLK STM32_PCLK1 /* * SPI driver system settings. */ #ifndef STM32_SPI_USE_SPI1 #define STM32_SPI_USE_SPI1 FALSE #endif #ifndef STM32_SPI_USE_SPI2 #define STM32_SPI_USE_SPI2 FALSE #endif #ifndef STM32_SPI_USE_SPI3 #define STM32_SPI_USE_SPI3 FALSE #endif #ifndef STM32_SPI_USE_SPI4 #define STM32_SPI_USE_SPI4 FALSE #endif #ifndef STM32_SPI_USE_SPI5 #define STM32_SPI_USE_SPI5 FALSE #endif #ifndef STM32_SPI_USE_SPI6 #define STM32_SPI_USE_SPI6 FALSE #endif #define STM32_SPI_SPI1_DMA_PRIORITY 1 #define STM32_SPI_SPI2_DMA_PRIORITY 1 #define STM32_SPI_SPI3_DMA_PRIORITY 1 #define STM32_SPI_SPI4_DMA_PRIORITY 1 #define STM32_SPI_SPI5_DMA_PRIORITY 1 #define STM32_SPI_SPI6_DMA_PRIORITY 1 #define STM32_SPI_SPI1_IRQ_PRIORITY 10 #define STM32_SPI_SPI2_IRQ_PRIORITY 10 #define STM32_SPI_SPI3_IRQ_PRIORITY 10 #define STM32_SPI_SPI4_IRQ_PRIORITY 10 #define STM32_SPI_SPI5_IRQ_PRIORITY 10 #define STM32_SPI_SPI6_IRQ_PRIORITY 10 #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") /* * ST driver system settings. */ #define STM32_ST_IRQ_PRIORITY 8 #ifndef STM32_ST_USE_TIMER #define STM32_ST_USE_TIMER 5 #endif /* * UART driver system settings. */ #define STM32_UART_USART1_IRQ_PRIORITY 12 #define STM32_UART_USART2_IRQ_PRIORITY 12 #define STM32_UART_USART3_IRQ_PRIORITY 12 #define STM32_UART_UART4_IRQ_PRIORITY 12 #define STM32_UART_UART5_IRQ_PRIORITY 12 #define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 #define STM32_UART_UART4_DMA_PRIORITY 0 #define STM32_UART_UART5_DMA_PRIORITY 0 #define STM32_UART_USART6_DMA_PRIORITY 0 #define STM32_UART_UART7_DMA_PRIORITY 0 #define STM32_UART_UART8_DMA_PRIORITY 0 #define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") /* * USB driver system settings. */ #define STM32_USB_USE_OTG1 TRUE #define STM32_USB_USE_OTG2 TRUE #define STM32_USB_OTG1_IRQ_PRIORITY 14 #define STM32_USB_OTG2_IRQ_PRIORITY 14 #define STM32_USB_OTG1_RX_FIFO_SIZE 512 #define STM32_USB_OTG2_RX_FIFO_SIZE 1024 #define STM32_USB_HOST_WAKEUP_DURATION 2 /* * WDG driver system settings. */ #define STM32_WDG_USE_IWDG FALSE #define STM32_EXTI_ENHANCED // limit ISR count per byte #define STM32_I2C_ISR_LIMIT 6