# hw definition file for processing by chibios_pins.py

# MCU class and specific type
MCU STM32L496 STM32L496xx

FLASH_RESERVE_START_KB 0
FLASH_BOOTLOADER_LOAD_KB 36

# reserve some space for params
APP_START_OFFSET_KB 4

# board ID for firmware load
APJ_BOARD_ID 1047

# setup build for a peripheral firmware
env AP_PERIPH 1

# crystal frequency, no crystal for now
OSCILLATOR_HZ 0

# assume 256k flash part
FLASH_SIZE_KB 256

STDOUT_SERIAL SD1
STDOUT_BAUDRATE 57600

# order of UARTs
SERIAL_ORDER OTG1 USART1

# a fault LED
PB7 LED_BOOTLOADER OUTPUT LOW # blue
define HAL_LED_ON 1

PB14 LED_RED OUTPUT LOW GPIO(1)

# USART1
PA9  USART1_TX USART1 SPEED_HIGH NODMA
PA10 USART1_RX USART1 SPEED_HIGH NODMA

# USB
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1

define HAL_USE_SERIAL TRUE

define STM32_SERIAL_USE_USART1 TRUE

define HAL_NO_GPIO_IRQ

define SERIAL_BUFFERS_SIZE 32
define HAL_USE_EMPTY_IO TRUE
define PORT_INT_REQUIRED_STACK 64


define DMA_RESERVE_SIZE 0


MAIN_STACK 0x800
PROCESS_STACK 0x800

# enable CAN support
PD0 CAN1_RX CAN1
PD1 CAN1_TX CAN1

CAN_ORDER 1

# debugger support
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD

# make bl baudrate match debug baudrate for easier debugging
define BOOTLOADER_BAUDRATE 57600

# use a small bootloader timeout
define HAL_BOOTLOADER_TIMEOUT 1000