/*
* This file is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see .
*
* Code by
* Andy Piper
* Siddharth Bharat Purohit, Cubepilot Pty. Ltd.
*/
/*
Implements Common frontend methods for Flash Interface Driver
*/
#pragma once
#include
class AP_FlashIface
{
public:
virtual bool init() = 0;
/**
* @details Read data from flash chip.
*
* @param[in] offset address offset from where to start the read
* @param[out] data data to be read from the device
* @param[in] size size of the data to be read
* @return The operation status.
* @retval false if the operation failed.
* @retval true if the operation succeeded.
*
*/
virtual bool read(uint32_t offset, uint8_t* data, uint32_t size) = 0;
/**
* @details Gets number bytes that can be written in one go (page size).
*
* @return page size in bytes.
*
*/
virtual uint32_t get_page_size() const = 0;
/**
* @details Gets number pages, each page can written in one go
*
* @return Number of pages.
*
*/
virtual uint32_t get_page_count() const = 0;
/**
* @details Sends command to start programming a page of the chip.
*
* @param[in] page Page number to be written to
* @param[in] data data to be written
* @param[out] delay_us Time to wait until next is_device_busy call
* @param[out] timeout_us Time after which the erase should be timedout,
* should be reset at every call.
* @return The operation status.
* @retval false if the operation failed.
* @retval true if the operation succeeded.
*
*/
virtual bool start_program_page(uint32_t page, const uint8_t *data, uint32_t &delay_us, uint32_t &timeout_us) = 0;
/**
* @details Tries to program as much as possible starting from the offset
* until size. User needs to call this as many times as needed
* taking already programmed bytes into account.
*
* @param[in] offset address offset for program
* @param[in] data data to be programmed
* @param[in] size size desired to be programmed
* @param[out] programming number of bytes programming, taking care of the limits
* @param[out] delay_us Time to wait until program typically finishes
* @param[out] timeout_us Time by which current program should have timedout.
* @return The operation status.
* @retval false if the operation failed.
* @retval true if the operation succeeded.
*
*/
virtual bool start_program_offset(uint32_t offset, const uint8_t* data, uint32_t size, uint32_t &programming,
uint32_t &delay_us, uint32_t &timeout_us)
{
return false;
}
/**
* @details Gets number bytes that can erased in one go(sector size)
*
* @return Sector size in bytes.
*
*/
virtual uint32_t get_sector_size() const = 0;
/**
* @details Gets number of sectors, each sector can be erased in one go
*
* @return Number of sectors.
*
*/
virtual uint32_t get_sector_count() const = 0;
/**
* @details Sends command to erase the entire chips.
*
* @param[out] delay_ms Time to wait until next is_device_busy call
* @param[out] timeout_ms Time by which the erase should have timedout
*
* @return The operation status.
* @retval false if the operation failed.
* @retval true if the operation succeeded.
*
*/
virtual bool start_mass_erase(uint32_t &delay_ms, uint32_t &timeout_ms) = 0;
/**
* @details Sends command to erase a sector of the chip.
*
* @param[in] sector Sector number to be erased
* @param[out] delay_ms Time to wait until next is_device_busy call
* @param[out] timeout_ms Time by which the erase should have timedout
*
* @return The operation status.
* @retval false if the operation failed.
* @retval true if the operation succeeded.
*
*/
virtual bool start_sector_erase(uint32_t sector, uint32_t &delay_ms, uint32_t &timeout_ms) = 0;
/**
* @details Tries to erase as much as possible starting from the offset
* until size. User needs to call this as many times as needed
* taking already erased bytes into account, until desired erase
* has taken place
*
* @param[in] offset address offset for erase
* @param[in] size size desired to be erased
* @param[out] erasing number of bytes erasing
* @param[out] delay_ms Time to wait until next is_device_busy call
* @param[out] timeout_ms Time by which the erase should have timedout
*
* @return The operation status.
* @retval false if the operation failed.
* @retval true if the operation succeeded.
*
*/
virtual bool start_erase_offset(uint32_t offset, uint32_t size, uint32_t &erasing,
uint32_t &delay_ms, uint32_t &timeout_ms)
{
return false;
}
/**
* @details Check if the device is busy.
*
* @return device busy with last op.
*
* @retval false if the device is ready.
* @retval true if the device is busy.
*
*/
virtual bool is_device_busy() = 0;
/**
* @details Check if selected sector is erased.
*
* @param[in] sector sector for which to check erase
* @return The operation status.
* @retval false if the operation failed.
* @retval true if the operation succeeded.
*
*/
virtual bool verify_sector_erase(uint32_t sector) = 0;
/**
* @details minimum number of bytes that can be erased
*
* @return Number of bytes.
*
*/
virtual uint32_t min_erase_size() const = 0;
/**
* @details Starts execution in place mode
*
* @return if successfully entered XIP mode.
*
* @retval false the device failed to enter XIP mode.
* @retval true the device has entered XIP mode.
*
*/
virtual bool start_xip_mode(void** addr) { return false; }
virtual bool stop_xip_mode() { return false; }
};