// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: t -*- /* GPS_NMEA.cpp - Generic NMEA GPS library for Arduino Code by Jordi Muņoz and Jose Julio. DIYDrones.com Edits by HappyKillmore This code works with boards based on ATMega168 / 328 and ATMega1280 (Serial port 1) This library is free software; you can redistribute it and / or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. GPS configuration : NMEA protocol Baud rate : 38400 NMEA Sentences : $GPGGA : Global Positioning System fix Data $GPVTG : Ttack and Ground Speed Methods: init() : GPS Initialization update() : Call this funcion as often as you want to ensure you read the incomming gps data Properties: latitude : latitude * 10000000 (long value) longitude : longitude * 10000000 (long value) altitude : altitude * 1000 (milimeters) (long value) ground_speed : Speed (m / s) * 100 (long value) ground_course : Course (degrees) * 100 (long value) Type : 2 (This indicate that we are using the Generic NMEA library) new_data : 1 when a new data is received. You need to write a 0 to new_data when you read the data fix : > = 1: GPS FIX, 0: No fix (normal logic) quality : 0 = No fix 1 = Bad (Num sats < 5) 2 = Poor 3 = Medium 4 = Good NOTE : This code has been tested on a Locosys 20031 GPS receiver (MTK chipset) */ #include "AP_GPS_NMEA.h" #include "WProgram.h" // Constructors //////////////////////////////////////////////////////////////// AP_GPS_NMEA::AP_GPS_NMEA(Stream *s) : GPS(s) { } // Public Methods ////////////////////////////////////////////////////////////// void AP_GPS_NMEA::init(void) { //Type = 2; // initialize serial port for binary protocol use _port->print(NMEA_OUTPUT_SENTENCES); _port->print(NMEA_OUTPUT_4HZ); _port->print(SBAS_ON); _port->print(DGPS_SBAS); _port->print(DATUM_GOOGLE); } // This code donīt wait for data, only proccess the data available on serial port // We can call this function on the main loop (50Hz loop) // If we get a complete packet this function call parse_nmea_gps() to parse and update the GPS info. void AP_GPS_NMEA::update(void) { char c; int numc; int i; numc = _port->available(); if (numc > 0){ for (i = 0; i < numc; i++){ c = _port->read(); if (c == '$'){ // NMEA Start bufferidx = 0; buffer[bufferidx++] = c; GPS_checksum = 0; GPS_checksum_calc = true; continue; } if (c == '\r'){ // NMEA End buffer[bufferidx++] = 0; parse_nmea_gps(); } else { if (bufferidx < (GPS_BUFFERSIZE - 1)){ if (c == '*') GPS_checksum_calc = false; // Checksum calculation end buffer[bufferidx++] = c; if (GPS_checksum_calc){ GPS_checksum ^= c; // XOR } } else { bufferidx = 0; // Buffer overflow : restart } } } } } /**************************************************************** * * * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * ** * **/ // Private Methods ////////////////////////////////////////////////////////////// void AP_GPS_NMEA::parse_nmea_gps(void) { uint8_t NMEA_check; long aux_deg; long aux_min; char *parseptr; if (strncmp(buffer,"$GPGGA",6)==0){ // Check if sentence begins with $GPGGA if (buffer[bufferidx-4]=='*'){ // Check for the "*" character NMEA_check = parseHex(buffer[bufferidx - 3]) * 16 + parseHex(buffer[bufferidx - 2]); // Read the checksums characters if (GPS_checksum == NMEA_check){ // Checksum validation //Serial.println("buffer"); _setTime(); valid_read = true; new_data = true; // New GPS Data parseptr = strchr(buffer, ',')+1; //parseptr = strchr(parseptr, ',')+1; time = parsenumber(parseptr, 2); // GPS UTC time hhmmss.ss parseptr = strchr(parseptr, ',')+1; aux_deg = parsedecimal(parseptr, 2); // degrees aux_min = parsenumber(parseptr + 2, 4); // minutes (sexagesimal) => Convert to decimal latitude = aux_deg * 10000000 + (aux_min * 50) / 3; // degrees + minutes / 0.6 ( * 10000000) (0.6 = 3 / 5) parseptr = strchr(parseptr, ',')+1; if ( * parseptr == 'S') latitude = -1 * latitude; // South latitudes are negative parseptr = strchr(parseptr, ',')+1; // W longitudes are Negative aux_deg = parsedecimal(parseptr, 3); // degrees aux_min = parsenumber(parseptr + 3, 4); // minutes (sexagesimal) longitude = aux_deg * 10000000 + (aux_min * 50) / 3; // degrees + minutes / 0.6 ( * 10000000) //longitude = -1*longitude; // This Assumes that we are in W longitudes... parseptr = strchr(parseptr, ',')+1; if ( * parseptr == 'W') longitude = -1 * longitude; // West longitudes are negative parseptr = strchr(parseptr, ',')+1; fix = parsedecimal(parseptr, 1); parseptr = strchr(parseptr, ',')+1; num_sats = parsedecimal(parseptr, 2); parseptr = strchr(parseptr, ',')+1; HDOP = parsenumber(parseptr, 1); // HDOP * 10 parseptr = strchr(parseptr, ',')+1; altitude = parsenumber(parseptr, 1) * 100; // altitude in decimeters * 100 = milimeters if (fix < 1) quality = 0; // No FIX else if(num_sats < 5) quality = 1; // Bad (Num sats < 5) else if(HDOP > 30) quality = 2; // Poor (HDOP > 30) else if(HDOP > 25) quality = 3; // Medium (HDOP > 25) else quality = 4; // Good (HDOP < 25) } else { _error("GPSERR: Checksum error!!\n"); } } } else if (strncmp(buffer,"$GPVTG",6)==0){ // Check if sentence begins with $GPVTG //Serial.println(buffer); if (buffer[bufferidx-4]=='*'){ // Check for the "*" character NMEA_check = parseHex(buffer[bufferidx - 3]) * 16 + parseHex(buffer[bufferidx - 2]); // Read the checksums characters if (GPS_checksum == NMEA_check){ // Checksum validation _setTime(); valid_read = true; new_data = true; // New GPS Data parseptr = strchr(buffer, ',')+1; ground_course = parsenumber(parseptr, 2); // Ground course in degrees * 100 parseptr = strchr(parseptr, ',')+1; parseptr = strchr(parseptr, ',')+1; parseptr = strchr(parseptr, ',')+1; parseptr = strchr(parseptr, ',')+1; parseptr = strchr(parseptr, ',')+1; parseptr = strchr(parseptr, ',')+1; ground_speed = parsenumber(parseptr, 2) * 10 / 36; // Convert Km / h to m / s ( * 100) //GPS_line = true; } else { _error("GPSERR: Checksum error!!\n"); } } } else { bufferidx = 0; _error("GPSERR: Bad sentence!!\n"); } } // Parse hexadecimal numbers uint8_t AP_GPS_NMEA::parseHex(char c) { if (c < '0') return (0); if (c <= '9') return (c - '0'); if (c < 'A') return (0); if (c <= 'F') return ((c - 'A')+10); } // Decimal number parser long AP_GPS_NMEA::parsedecimal(char *str, uint8_t num_car) { long d = 0; uint8_t i; i = num_car; while ((str[0] != 0) && (i > 0)) { if ((str[0] > '9') || (str[0] < '0')) return d; d *= 10; d += str[0] - '0'; str++; i--; } return d; } // Function to parse fixed point numbers (numdec=number of decimals) long AP_GPS_NMEA::parsenumber(char *str, uint8_t numdec) { long d = 0; uint8_t ndec = 0; while (str[0] != 0) { if (str[0] == '.'){ ndec = 1; } else { if ((str[0] > '9') || (str[0] < '0')) return d; d *= 10; d += str[0] - '0'; if (ndec > 0) ndec++; if (ndec > numdec) // we reach the number of decimals... return d; } str++; } return d; }