// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- #pragma once #include // Global parameter class. // class Parameters { public: // The version of the layout as described by the parameter enum. // // When changing the parameter enum in an incompatible fashion, this // value should be incremented by one. // // The increment will prevent old parameters from being used incorrectly // by newer code. // static const uint16_t k_format_version = 120; // The parameter software_type is set up solely for ground station use // and identifies the software type (eg ArduPilotMega versus // ArduCopterMega) // GCS will interpret values 0-9 as ArduPilotMega. Developers may use // values within that range to identify different branches. // static const uint16_t k_software_type = 10; // 0 for APM // trunk // Parameter identities. // // The enumeration defined here is used to ensure that every parameter // or parameter group has a unique ID number. This number is used by // AP_Param to store and locate parameters in EEPROM. // // Note that entries without a number are assigned the next number after // the entry preceding them. When adding new entries, ensure that they // don't overlap. // // Try to group related variables together, and assign them a set // range in the enumeration. Place these groups in numerical order // at the end of the enumeration. // // WARNING: Care should be taken when editing this enumeration as the // AP_Param load/save code depends on the values here to identify // variables saved in EEPROM. // // enum { // Layout version number, always key zero. // k_param_format_version = 0, k_param_software_type, k_param_ins_old, // *** Deprecated, remove with next eeprom number change k_param_ins, // libraries/AP_InertialSensor variables k_param_NavEKF2_old, // deprecated k_param_NavEKF2, k_param_g2, // 2nd block of parameters // simulation k_param_sitl = 10, // barometer object (needed for SITL) k_param_barometer, // scheduler object (for debugging) k_param_scheduler, // relay object k_param_relay, // EPM object k_param_epm, // BoardConfig object k_param_BoardConfig, // GPS object k_param_gps, // Parachute object k_param_parachute, // Landing gear object k_param_landinggear, // 18 // Input Management object k_param_input_manager, // 19 // Misc // k_param_log_bitmask_old = 20, // Deprecated k_param_log_last_filenumber, // *** Deprecated - remove // with next eeprom number // change k_param_toy_yaw_rate, // deprecated - remove k_param_crosstrack_min_distance, // deprecated - remove with next eeprom number change k_param_rssi_pin, // unused, replaced by rssi_ library parameters k_param_throttle_accel_enabled, // deprecated - remove k_param_wp_yaw_behavior, k_param_acro_trainer, k_param_pilot_velocity_z_max, k_param_circle_rate, // deprecated - remove k_param_rangefinder_gain, k_param_ch8_option, k_param_arming_check, k_param_sprayer, k_param_angle_max, k_param_gps_hdop_good, k_param_battery, k_param_fs_batt_mah, k_param_angle_rate_max, // remove k_param_rssi_range, // unused, replaced by rssi_ library parameters k_param_rc_feel_rp, k_param_NavEKF, // Extended Kalman Filter Inertial Navigation Group k_param_mission, // mission library k_param_rc_13, k_param_rc_14, k_param_rally, k_param_poshold_brake_rate, k_param_poshold_brake_angle_max, k_param_pilot_accel_z, k_param_serial0_baud, // deprecated - remove k_param_serial1_baud, // deprecated - remove k_param_serial2_baud, // deprecated - remove k_param_land_repositioning, k_param_rangefinder, // rangefinder object k_param_fs_ekf_thresh, k_param_terrain, k_param_acro_expo, k_param_throttle_deadzone, k_param_optflow, k_param_dcmcheck_thresh, // deprecated - remove k_param_log_bitmask, k_param_cli_enabled, k_param_throttle_filt, k_param_throttle_behavior, k_param_pilot_takeoff_alt, // 64 // 65: AP_Limits Library k_param_limits = 65, // deprecated - remove k_param_gpslock_limit, // deprecated - remove k_param_geofence_limit, // deprecated - remove k_param_altitude_limit, // deprecated - remove k_param_fence, k_param_gps_glitch, // deprecated k_param_baro_glitch, // 71 - deprecated // AP_ADSB Library k_param_adsb, // 72 k_param_notify, // 73 // 74: precision landing object k_param_precland = 74, // // 75: Singlecopter, CoaxCopter // k_param_single_servo_1 = 75, // remove k_param_single_servo_2, // remove k_param_single_servo_3, // remove k_param_single_servo_4, // 78 - remove // // 80: Heli // k_param_heli_servo_1 = 80, // remove k_param_heli_servo_2, // remove k_param_heli_servo_3, // remove k_param_heli_servo_4, // remove k_param_heli_pitch_ff, // remove k_param_heli_roll_ff, // remove k_param_heli_yaw_ff, // remove k_param_heli_stab_col_min, // remove k_param_heli_stab_col_max, // remove k_param_heli_servo_rsc, // 89 = full! - remove // // 90: misc2 // k_param_motors = 90, k_param_disarm_delay, k_param_fs_crash_check, k_param_throw_motor_start, k_param_terrain_follow, // 94 k_param_avoid, // 97: RSSI k_param_rssi = 97, // // 100: Inertial Nav // k_param_inertial_nav = 100, // deprecated k_param_wp_nav, k_param_attitude_control, k_param_pos_control, k_param_circle_nav, // 104 // 110: Telemetry control // k_param_gcs0 = 110, k_param_gcs1, k_param_sysid_this_mav, k_param_sysid_my_gcs, k_param_serial1_baud_old, // deprecated k_param_telem_delay, k_param_gcs2, k_param_serial2_baud_old, // deprecated k_param_serial2_protocol, // deprecated k_param_serial_manager, k_param_ch9_option, k_param_ch10_option, k_param_ch11_option, k_param_ch12_option, k_param_takeoff_trigger_dz, k_param_gcs3, k_param_gcs_pid_mask, // 126 // // 135 : reserved for Solo until features merged with master // k_param_rtl_speed_cms = 135, k_param_fs_batt_curr_rtl, k_param_rtl_cone_slope, // 137 // // 140: Sensor parameters // k_param_imu = 140, // deprecated - can be deleted k_param_battery_monitoring = 141, // deprecated - can be deleted k_param_volt_div_ratio, // deprecated - can be deleted k_param_curr_amp_per_volt, // deprecated - can be deleted k_param_input_voltage, // deprecated - can be deleted k_param_pack_capacity, // deprecated - can be deleted k_param_compass_enabled, k_param_compass, k_param_rangefinder_enabled_old, // deprecated k_param_frame_orientation, k_param_optflow_enabled, // deprecated k_param_fs_batt_voltage, k_param_ch7_option, k_param_auto_slew_rate, // deprecated - can be deleted k_param_rangefinder_type_old, // deprecated k_param_super_simple = 155, k_param_axis_enabled = 157, // deprecated - remove with next eeprom number change k_param_copter_leds_mode, // deprecated - remove with next eeprom number change k_param_ahrs, // AHRS group // 159 // // 160: Navigation parameters // k_param_rtl_altitude = 160, k_param_crosstrack_gain, // deprecated - remove with next eeprom number change k_param_rtl_loiter_time, k_param_rtl_alt_final, k_param_tilt_comp, //164 deprecated - remove with next eeprom number change // // Camera and mount parameters // k_param_camera = 165, k_param_camera_mount, k_param_camera_mount2, // deprecated // // Batery monitoring parameters // k_param_battery_volt_pin = 168, // deprecated - can be deleted k_param_battery_curr_pin, // 169 deprecated - can be deleted // // 170: Radio settings // k_param_rc_1 = 170, k_param_rc_2, k_param_rc_3, k_param_rc_4, k_param_rc_5, k_param_rc_6, k_param_rc_7, k_param_rc_8, k_param_rc_10, k_param_rc_11, k_param_throttle_min, // remove k_param_throttle_max, // remove k_param_failsafe_throttle, k_param_throttle_fs_action, // remove k_param_failsafe_throttle_value, k_param_throttle_trim, // remove k_param_esc_calibrate, k_param_radio_tuning, k_param_radio_tuning_high, k_param_radio_tuning_low, k_param_rc_speed = 192, k_param_failsafe_battery_enabled, k_param_throttle_mid, // remove k_param_failsafe_gps_enabled, // remove k_param_rc_9, k_param_rc_12, k_param_failsafe_gcs, k_param_rcmap, // 199 // // 200: flight modes // k_param_flight_mode1 = 200, k_param_flight_mode2, k_param_flight_mode3, k_param_flight_mode4, k_param_flight_mode5, k_param_flight_mode6, k_param_simple_modes, // // 210: Waypoint data // k_param_waypoint_mode = 210, // remove k_param_command_total, // remove k_param_command_index, // remove k_param_command_nav_index, // remove k_param_waypoint_radius, // remove k_param_circle_radius, // remove k_param_waypoint_speed_max, // remove k_param_land_speed, k_param_auto_velocity_z_min, // remove k_param_auto_velocity_z_max, // remove - 219 k_param_land_speed_high, // // 220: PI/D Controllers // k_param_acro_rp_p = 221, k_param_axis_lock_p, // remove k_param_pid_rate_roll, // remove k_param_pid_rate_pitch, // remove k_param_pid_rate_yaw, // remove k_param_p_stabilize_roll, // remove k_param_p_stabilize_pitch, // remove k_param_p_stabilize_yaw, // remove k_param_p_pos_xy, k_param_p_loiter_lon, // remove k_param_pid_loiter_rate_lat, // remove k_param_pid_loiter_rate_lon, // remove k_param_pid_nav_lat, // remove k_param_pid_nav_lon, // remove k_param_p_alt_hold, k_param_p_vel_z, k_param_pid_optflow_roll, // remove k_param_pid_optflow_pitch, // remove k_param_acro_balance_roll_old, // remove k_param_acro_balance_pitch_old, // remove k_param_pid_accel_z, k_param_acro_balance_roll, k_param_acro_balance_pitch, k_param_acro_yaw_p, k_param_autotune_axis_bitmask, k_param_autotune_aggressiveness, k_param_pi_vel_xy, k_param_fs_ekf_action, k_param_rtl_climb_min, k_param_rpm_sensor, k_param_autotune_min_d, // 251 k_param_DataFlash = 253, // 253 - Logging Group // 254,255: reserved //Sub-specific parameters k_param_surface_depth = 256, // Joystic gain parameters k_param_gain_default, k_param_maxGain, k_param_minGain, k_param_numGainSettings, // Joystick button mapping parameters k_param_jbtn_0 = 261, k_param_jbtn_1, k_param_jbtn_2, k_param_jbtn_3, k_param_jbtn_4, k_param_jbtn_5, k_param_jbtn_6, k_param_jbtn_7, k_param_jbtn_8, k_param_jbtn_9, k_param_jbtn_10, k_param_jbtn_11, k_param_jbtn_12, k_param_jbtn_13, k_param_jbtn_14, k_param_jbtn_15, // 276 k_param_pid_crosstrack_control, k_param_pid_heading_control, k_param_leak_detector, // leak detector object k_param_failsafe_leak, // leak failsafe behavior k_param_failsafe_pressure, // internal pressure failsafe behavior k_param_failsafe_pressure_max, // maximum internal pressure in pascal before failsafe is triggered k_param_failsafe_temperature, // internal temperature failsafe behavior k_param_failsafe_temperature_max, // maximum internal temperature in degrees C before failsafe is triggered k_param_failsafe_terrain, // terrain failsafe behavior k_param_xtrack_angle_limit, // angle limit for xtrack correction in degrees k_param_cam_tilt_step, k_param_lights_step }; AP_Int16 format_version; AP_Int8 software_type; // Telemetry control // AP_Int16 sysid_this_mav; AP_Int16 sysid_my_gcs; AP_Int8 telem_delay; #if CLI_ENABLED == ENABLED AP_Int8 cli_enabled; #endif AP_Float throttle_filt; AP_Int16 throttle_behavior; AP_Int16 takeoff_trigger_dz; AP_Float pilot_takeoff_alt; AP_Int16 rtl_altitude; AP_Int16 rtl_speed_cms; AP_Float rtl_cone_slope; AP_Float rangefinder_gain; AP_Int8 failsafe_battery_enabled; // battery failsafe enabled AP_Float fs_batt_voltage; // battery voltage below which failsafe will be triggered AP_Float fs_batt_mah; // battery capacity (in mah) below which failsafe will be triggered AP_Int8 failsafe_leak; // leak detection failsafe behavior AP_Int8 failsafe_gcs; // ground station failsafe behavior AP_Int8 failsafe_pressure; AP_Int8 failsafe_temperature; AP_Int32 failsafe_pressure_max; AP_Int8 failsafe_temperature_max; AP_Int8 failsafe_terrain; AP_Int8 xtrack_angle_limit; AP_Int16 gps_hdop_good; // GPS Hdop value at or below this value represent a good position AP_Int8 compass_enabled; AP_Int8 super_simple; AP_Int16 rtl_alt_final; AP_Int16 rtl_climb_min; // rtl minimum climb in cm AP_Int8 wp_yaw_behavior; // controls how the autopilot controls yaw during missions AP_Int8 rc_feel_rp; // controls vehicle response to user input with 0 being extremely soft and 100 begin extremely crisp AP_Int16 poshold_brake_rate; // PosHold flight mode's rotation rate during braking in deg/sec AP_Int16 poshold_brake_angle_max; // PosHold flight mode's max lean angle during braking in centi-degrees // Waypoints // AP_Int32 rtl_loiter_time; AP_Int16 land_speed; AP_Int16 land_speed_high; AP_Int16 pilot_velocity_z_max; // maximum vertical velocity the pilot may request AP_Int16 pilot_accel_z; // vertical acceleration the pilot may request // Throttle // AP_Int8 failsafe_throttle; AP_Int16 failsafe_throttle_value; AP_Int16 throttle_deadzone; // Flight modes // AP_Int8 flight_mode1; AP_Int8 flight_mode2; AP_Int8 flight_mode3; AP_Int8 flight_mode4; AP_Int8 flight_mode5; AP_Int8 flight_mode6; AP_Int8 simple_modes; // Misc // AP_Int32 log_bitmask; AP_Int8 esc_calibrate; AP_Int8 radio_tuning; AP_Int16 radio_tuning_high; AP_Int16 radio_tuning_low; AP_Int8 frame_orientation; AP_Int8 ch7_option; AP_Int8 ch8_option; AP_Int8 ch9_option; AP_Int8 ch10_option; AP_Int8 ch11_option; AP_Int8 ch12_option; AP_Int8 arming_check; AP_Int8 disarm_delay; AP_Int8 land_repositioning; AP_Int8 fs_ekf_action; AP_Int8 fs_crash_check; AP_Float fs_ekf_thresh; AP_Int16 gcs_pid_mask; AP_Int8 throw_motor_start; AP_Int8 terrain_follow; // RC channels RC_Channel rc_1; RC_Channel rc_2; RC_Channel rc_3; RC_Channel rc_4; RC_Channel_aux rc_5; RC_Channel_aux rc_6; RC_Channel_aux rc_7; RC_Channel_aux rc_8; RC_Channel_aux rc_9; RC_Channel_aux rc_10; RC_Channel_aux rc_11; RC_Channel_aux rc_12; RC_Channel_aux rc_13; RC_Channel_aux rc_14; AP_Int16 rc_speed; // speed of fast RC Channels in Hz AP_Float gain_default; AP_Float maxGain; AP_Float minGain; AP_Int8 numGainSettings; AP_Int16 cam_tilt_step; AP_Int16 lights_step; // Joystick button parameters JSButton jbtn_0; JSButton jbtn_1; JSButton jbtn_2; JSButton jbtn_3; JSButton jbtn_4; JSButton jbtn_5; JSButton jbtn_6; JSButton jbtn_7; JSButton jbtn_8; JSButton jbtn_9; JSButton jbtn_10; JSButton jbtn_11; JSButton jbtn_12; JSButton jbtn_13; JSButton jbtn_14; JSButton jbtn_15; // Acro parameters AP_Float acro_rp_p; AP_Float acro_yaw_p; AP_Float acro_balance_roll; AP_Float acro_balance_pitch; AP_Int8 acro_trainer; AP_Float acro_expo; // PI/D controllers AC_PI_2D pi_vel_xy; AC_P p_vel_z; AC_PID pid_accel_z; AC_P p_pos_xy; AC_P p_alt_hold; AC_PID pid_crosstrack_control; AC_PID pid_heading_control; // Autotune AP_Int8 autotune_axis_bitmask; AP_Float autotune_aggressiveness; AP_Float autotune_min_d; AP_Float surface_depth; // Note: keep initializers here in the same order as they are declared // above. Parameters() : rc_1 (CH_1), rc_2 (CH_2), rc_3 (CH_3), rc_4 (CH_4), rc_5 (CH_5), rc_6 (CH_6), rc_7 (CH_7), rc_8 (CH_8), rc_9 (CH_9), rc_10 (CH_10), rc_11 (CH_11), rc_12 (CH_12), rc_13 (CH_13), rc_14 (CH_14), // PID controller initial P initial I initial D initial imax initial filt hz pid rate //--------------------------------------------------------------------------------------------------------------------------------- pi_vel_xy (VEL_XY_P, VEL_XY_I, VEL_XY_IMAX, VEL_XY_FILT_HZ, WPNAV_LOITER_UPDATE_TIME), p_vel_z (VEL_Z_P), pid_accel_z (ACCEL_Z_P, ACCEL_Z_I, ACCEL_Z_D, ACCEL_Z_IMAX, ACCEL_Z_FILT_HZ, MAIN_LOOP_SECONDS), // P controller initial P //---------------------------------------------------------------------- p_pos_xy (POS_XY_P), p_alt_hold (ALT_HOLD_P), pid_crosstrack_control (XTRACK_P, XTRACK_I, XTRACK_D, XTRACK_IMAX, XTRACK_FILT_HZ, XTRACK_DT), pid_heading_control (HEAD_P, HEAD_I, HEAD_D, HEAD_IMAX, HEAD_FILT_HZ, HEAD_DT) { } }; /* 2nd block of parameters, to avoid going past 256 top level keys */ class ParametersG2 { public: ParametersG2(void); // var_info for holding Parameter information static const struct AP_Param::GroupInfo var_info[]; // altitude at which nav control can start in takeoff AP_Float wp_navalt_min; #if GRIPPER_ENABLED AP_Gripper gripper; #endif #if PROXIMITY_ENABLED == ENABLED // proximity (aka object avoidance) library AP_Proximity proximity; #endif }; extern const AP_Param::Info var_info[];